Search NASA⌕ Search

SEARCH · Search NASA

Results for “gap analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Relationship between cap structure and energy gap in capped carbon nanotubes

Revealing a universal relation between geometrical structures and electronic properties of capped carbon nanotubes (CNTs) is one of the current objectives in nanocarbon community. Here, we investigate the local curvature of capped CNTs and define the cap region by a crossover behavior of the curvature energy versus the number of carbon atoms integrated from the tip to the tube region. Clear correlations among the energy gap of the cap localized states, the curvature energy, the number of carbon atoms in the cap region, and the number of specific carbon clusters are observed. The present analysis opens the way to understand the cap states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Holistic Small-Signal Stability Analysis for Large-Scale Inverter-Intensive Power Systems with Coupled and Full-Order Dynamics from Control Systems and Power Networks

The increasing penetration of inverter-based resources (IBRs) into the existing power systems introduces tremendous benefits for enhanced sustainability but also poses inevitable challenges in terms of insufficient inertia, potential instability, and complex network dynamics, among others. However, the additional coupling introduced by the interactions among gridfollowing (GFL) and grid-forming (GFM) IBRs and the other components (i.e., synchronous generators [SGs], loads, and network, etc.) has not been clearly explored. A holistic, scalable, and quantitative stability analysis framework with the control systems and power networks is still missing. Here, in this paper, to fill in the technical gaps, a holistic small-signal model of the entire system with both rotating generation units and IBRs is established. An extended power flow model with operation dynamics from both generator control schemes and power networks is proposed to provide the varying steady-state operating points for small-signal modeling. The proposed method is compared with MATLAB solvers, and the results show that the proposed approach has a minimum calculation time, which can be less than 12 seconds for a large-scale power system with up to 2,000 buses. Furthermore, a quantitative method is developed to identify the impacts of IBRs on system performance with emphases on the potential stability issues with GFL IBRs, additional benefits of employing GFM IBRs, the feasibility of replacing SGs with GFM IBRs, and the impact of penetration level of different kinds of generation units. Finally, a field island power system is used to verify the proposed approach, and hardware-in-the-loop (HIL) tests are provided to further demonstrate the effectiveness of the proposed analysis.

14 SOLAR ENERGY↗

Active multi-mode data analysis to improve fault diagnosis in AHUs

Faults in heating, ventilation and air conditioning systems can lead to increased energy consumption, occupant comfort issues, and reduced equipment lifetime. Commercial fault detection and diagnosis (FDD) tools has been increasingly deployed in U.S. commercial buildings. While they are helping to achieve energy efficiency and operational reliability, there remain gaps in their fault diagnostic capabilities. The diagnostic results often contain multiple distinct candidate root causes (CRCs) or offer no insight into CRCs. This study developed a novel active rule-based multi-mode data analysis method to enhance diagnostic resolution by applying proven rule sets and additional new rules to data from multiple known operational modes. The proposed method was demonstrated using enhanced air handling unit performance assessment rule sets and validated with the simulated data of two air handling units. New metrics, namely, reduced number of CRCs and improvement ratio, were developed to quantify the improvement of fault diagnostic resolution. The validation results showed that the proposed method effectively reduced the number of CRCs in contrast to analyzing data solely for a single mode of operation. It achieved a median improvement ratio of 80% in 19 test cases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Quantifying market volume sensitivity to material property modifications in polyhydroxybutyrate: A parametric analysis approach

Polyhydroxybutyrate (PHB), a biodegradable biopolymer, represents a promising alternative to petroleum-based thermoplastics. However, despite consistent market growth, PHB faces persistent commercialization challenges that limit widespread adoption. Existing research has focused predominantly on optimizing PHB production processes, leaving a critical gap in understanding which material property modifications would most effectively enhance market competitiveness. This study addresses this gap by systematically analyzing the relationship between polymer material properties and market performance using U.S. market data from 2008 to 2021 for 21 thermoplastic polymers across 19 material properties. We employed principal component regression to identify property modifications that could maximize market volume while reducing CO 2 emissions. Our parametric analysis revealed that two specific material properties – Hardness Shore A and Sheet Extrusion Temperature – significantly influence PHB marketability across different price points. Market simulations demonstrated that a 10% increase in Hardness Shore A could increase PHB market volume by 431.5 million kg while reducing emissions by 188.7 kg CO 2 . A similar 10% increase to Sheet Extrusion Temperature could yield a 297.5 million kg volume increase and a 99.2 kg CO 2 reduction in emissions. Critically, this approach is agnostic to the specific methods required to achieve these property changes, instead providing material scientists with quantitative, data-driven targets for R&D prioritization. Here, this framework offers a novel methodology for evaluating biopolymer competitiveness and supporting strategic decisions to accelerate PHB market adoption and contribute to decarbonization of the plastics industry.

09 BIOMASS FUELS↗

A Modeling Approach to Support Changeability Analysis and Management of Earth Observation Portfolios

Earth observing (EO) mission portfolios provide data on many geophysical parameters that collectively inform our understanding of the Earth system. To observe large-scale climate trends, it is important to collect data on many parameters over time. However, gaps may occur between missions due to formulation complexity, development delays, and uncertain events in operations. These gaps may impact the ability to provide sustained measurements. Developing a balanced EO mission portfolio is key to supporting study of the Earth system. Yet, decision-making at the portfolio level is a complex task because missions often address multiple parameters. Currently, the likelihood of data gaps is often assessed for an individual parameter, but decisions and events can impact data collection for many parameters. This poster introduces a modeling approach that supports management of the many parameter impacts of decisions and uncertain events. The approach provides a foundation for analyzing changeability in EO mission portfolios. Changeability analysis provides insight into a portfolio’s sensitivity to changes caused by decisions or uncertain events. The model is developed to analyze two aspects of changeability, robustness and flexibility, in EO mission portfolios. In context of these portfolios, the authors define robustness as a portfolio’s ability to provide sustained measurements despite future uncertainties, and they define flexibility as the availability of decision alternatives that contribute to parameter coverage at little detriment to the rest of the portfolio. The proposed model characterizes a portfolio’s sensitivity to change by capturing mission-parameter interconnectivity and redundancy in parameter coverage. The model can be analyzed to identify events that can create substantial gaps, thereby revealing focus areas for mitigation efforts. The model can also be analyzed to identify gap mitigation decisions that may improve parameter coverage with little detriment to the rest of the portfolio, thereby revealing favorable pathways for portfolio improvement. Developing a process for identifying these threats and opportunities will be the focus of future work. A parallel poster proposes a standard for visualizing and communicating portfolio-level impacts of decisions and uncertain events.

Lindsey Jacobson↗

Bridging the gap between LCA, LCC and CBA as sustainability assessment tools

Increasing interest in sustainability has led to the development of sustainability assessment tools such as Life Cycle Analysis (LCA), Life Cycle Costing (LCC) and Cost–Benefit Analysis (CBA). Due to methodological disparity of these three tools, conflicting assessment results generate confusion for many policy and business decisions. In order to interpret and integrate assessment results, the paper provides a framework that clarifies the connections and coherence between the included assessment methodologies. Building on this framework, the paper further focuses on key aspects to adapt any of the methodologies to full sustainability assessments. Aspects dealt with in the review are for example the reported metrics, the scope, data requirements, discounting, product- or project-related and approaches with respect to scarcity and labor requirements. In addition to these key aspects, the review shows that important connections exist: (i) the three tools can cope with social inequality, (ii) processes such as valuation techniques for LCC and CBA are common, (iii) Environmental Impact Assessment (EIA) is used as input in both LCA and CBA and (iv) LCA can be used in parallel with LCC. Furthermore, the most integrated sustainability approach combines elements of LCA and LCC to achieve the Life Cycle Sustainability Assessment (LCSA). The key aspects and the connections referred to in the review are illustrated with a case study on the treatment of end-of-life automotive glass. - Highlights: • Proliferation of assessment tools creates ambiguity and confusion. • The developed assessment framework clarifies connections between assessment tools. • Broadening LCA, key aspects are metric and data requirements. • Broadening LCC, key aspects are scope, time frame and discounting. • Broadening CBA, focus point, timespan, references, labor and scarcity are key.

54 ENVIRONMENTAL SCIENCES↗

Charge carrier dynamics and recombination in graded band gap CuIn 1-x Ga x Se 2 polycrystalline thin-film photovoltaic solar cell absorbers

We report the results of spectroscopic time-resolved photoluminescence (TRPL) analysis for polycrystalline CuIn 1-x Ga x Se 2 (CIGS) films. On the <5 ns time scale, we investigated minority carrier spatial redistribution from the initial absorption profile near the surface of the films to the conduction band minimum. Based on these data, the estimated minority carrier mobility is 75–230 cm 2 V -1 s -1 . Full TRPL decays were analyzed using models for donor-acceptor pair (DAP) recombination. We estimated that the concentration of DAP recombination centers was 5×10 15 –10 17 cm -3 . Data also show that Shockley-Reed-Hall and surface recombination are not significant for polycrystalline CIGS absorbers used in high-efficiency photovoltaic solar cells.

14 SOLAR ENERGY↗

Analysis of magnetically immersed electron guns with non-adiabatic fields

Electron diode guns, which have strongly varying magnetic or electric fields in a cathode-anode gap, were investigated in order to generate laminar electron beams with high current density using magnetically immersed guns. By creating a strongly varying radial electric field in a cathode-anode gap of the electron gun, it was demonstrated that the optical properties of the gun can be significantly altered, which allows the generation of a laminar, high-current electron beam with relatively low magnetic field on the cathode. The relatively high magnetic compression of the electron beam achieved by this method is important for producing electron beams with high current density. A similar result can be obtained by inducing a strong variation of the magnetic field in a cathode-anode gap. It was observed that creating a dip in the axial magnetic field in the cathode-anode gap of an adiabatic electron gun has an optical effect similar to guns with strong variation of radial electric field. By analyzing the electron trajectories angles and presenting the results in a gun performance map different geometries of magnetically immersed electron guns with non-adiabatic fields are compared with each other and with a more traditional adiabatic electron gun. Some advantages and limitations of guns with non-adiabatic fields are outlined. In conclusion, the tests results of non-adiabatic electron gun with modified magnetic field are presented.

43 PARTICLE ACCELERATORS↗

Analysis of a Destructive Wind Storm on 16 November 2008 in Brisbane, Australia

During the late afternoon on 16 November 2008 the Brisbane (Australia) suburb of “The Gap” experienced extensive wind damage caused by an intense local thunderstorm. The CP2 research radar nearby detected near-surface radial velocities exceeding 44 m s -1 above The Gap while hail size reports did not exceed golf ball size, and no tornadoes were reported. This study shows that the storm environment was characterized by a layer of very moist (mixing ratios exceeding 12 g kg -1 ) near-surface air embedded in strong storm-relative low-level flow, whereas the storm-relative winds aloft were significantly weaker. And while the thermodynamic storm environment contained a range of downdraft promoting ingredients such as a ~4 km high melting level above a ~2 km deep layer with nearly dry adiabatic lapse rates mostly collocated with dry ambient air, a ~1 km deep stable layer near the ground would generally lower expectations of destructive surface winds based on the downburst mechanism. We also found that once observed reflectivities exceed 70 dBZ that downdraft cooling due to hail melting and downdraft acceleration based on hail loading are likely to become non-negligible forcing mechanisms for a strong downdraft. The study found a close proximity of the hydrostatically and dynamically driven mesohigh at the base of the downdraft to a dynamically driven mesolow associated with a radar-observed low-level circulation. This proximity is hypothesized to have been instrumental in the observed anisotropic horizontal acceleration of the near-ground outflow and the ultimate strength of the Gap storm surface winds. Finally, we speculate that the 44 weak storm-relative midlevel winds allowed the downdraft to descend close to the low45 level circulation which set up this strong horizontal perturbation pressure gradient.

54 ENVIRONMENTAL SCIENCES↗

Bridging the Engineering and Medicine Gap

A primary challenge NASA faces is communication between the disparate entities of engineers and human system experts in life sciences. Clear communication is critical for exploration mission success from the perspective of both risk analysis and data handling. The engineering community uses probabilistic risk assessment (PRA) models to inform their own risk analysis and has extensive experience managing mission data, but does not always fully consider human systems integration (HSI). The medical community, as a part of HSI, has been working 1) to develop a suite of tools to express medical risk in quantitative terms that are relatable to the engineering approaches commonly in use, and 2) to manage and integrate HSI data with engineering data. This talk will review the development of the Integrated Medical Model as an early attempt to bridge the communication gap between the medical and engineering communities in the language of PRA. This will also address data communication between the two entities in the context of data management considerations of the Medical Data Architecture. Lessons learned from these processes will help identify important elements to consider in future communication and integration of these two groups.

Walton, M.↗

Enhance Low Level Temperature and Moisture Profiles Through Combining NUCAPS, ABI Observations, and RTMA Analysis

Thermodynamic information from low levels in the atmosphere is crucial for operational weather forecasts and meteorological researchers. The NOAA Unique Combined Atmospheric Processing System (NUCAPS) sounding products have been proven beneficial to fill the data gap between synoptic radiosonde observations (RAOBs). However, compared with the upper troposphere, the accuracy of NUCAPS soundings in the low levels still needs improvement. In this study, a deep neural network (DNN) is applied to fuse multiple data sources to enhance the NUCAPS temperature and moisture profiles in the lower atmosphere. The network is developed by combining satellite observations, including NUCAPS sounding retrievals and high resolution geostationary satellite observations from the Advanced Baseline Imager, and surface analysis from the Real-Time Mesoscale Analysis (RTMA) as inputs, while collocated soundings from ECMWF re-analysis version 5 are used as the benchmark for the training. The performance of the model is evaluated by using the independent testing data set, data from a different year, as well as collocated RAOBs, showing improvement to the temperature and moisture profiles by reducing the root-mean-squared-error (RMSE) by more than 30% in the lower atmosphere (from 700 hPa to surface) in both clear sky and partially cloudy conditions. A convective event from June 18, 2017 is presented to illustrate the application of the enhanced low level soundings on high impact weather events. The enhanced soundings from fused data capture the large surface-based convective available potential energy structures in the preconvection environment, which is very useful for severe storm nowcasting and forecasting applications.

54 ENVIRONMENTAL SCIENCES↗

Numerical analysis of hydrodynamics in a rotor-stator reactor for biodiesel synthesis

A rotor-stator spinning disk reactor for intensified biodiesel synthesis is described and numerically simulated. The reactor consists of two flat disks, located coaxially and parallel to each other with a gap ranging from 0.1 mm to 0.2 mm between the disks. The upper disk is located on a rotating shaft while the lower disk is stationary. The feed liquids, triglycerides (TG) and methanol are introduced coaxially along the center line of rotating disk and stationary disk, respectively. Fluid hydrodynamics in the reactor for synthesis of biodiesel from TG and methanol in the presence of a sodium hydroxide catalyst are simulated, using convection-diffusion-reaction species transport model by the CFD software ANSYS©Fluent v. 13.0. The effects of upper disk’s spinning speed, gap size and flow rates at inlets are evaluated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Integration of historical map and aerial imagery to characterize long-term land-use change and landscape dynamics: An object-based analysis via Random Forests

Tracking Earth’s past helps us to move from hindsight to foresight in seeking landscape sustainability, a pursuit aided by modern mapping capabilities but hindered by a dearth of historical landscape information. To fill the data gap and exemplify the use of old map for land-use change sciences, we combined a paper-based US civil war map and aerial photos to derive land-use history and landscape dynamics at fine scales for a region near Chancellorsville, VA, USA, from 1867 to 2014. We also tested how advanced algorithms—object-based analysis and random forests (RF)—could aid in data processing. Automatic classification of the 1867 map proved difficult, but its manual digitization could benefit from object-based image segmentation. Classifying digital aerial images was more accurate via the object-based than pixel-based method, but only if the images were segmented appropriately. In the object-based classification, spectral-based features were much more important than shape/geometry features, as ranked by RF. During the 147 years, 32% of the region changed in land type. Settlement and roads increased in extent by 1850% and 691%, respectively, and woodland decreased by 19%. These changes fragmented the landscape, altered the hydrological regime, and affected river morphology. The utility of old maps exemplified here provides an impetus for exploring and leveraging extant old maps or historical records to support land-use and global change research. Our study also connotes the importance of geotagging current data, such as photos and videos, that may serve as a baseline to document future landscape change.

Historical map, object-based, Random Forests, old ↗

Web-based visual data exploration for improved radiological source detection

Radiation detection can provide a reliable means of detecting radiological material. Such capabilities can help to prevent nuclear and/or radiological attacks, but reliable detection in uncontrolled surroundings requires algorithms that account for environmental background radiation. The Berkeley Data Cloud (BDC) facilitates the development of such methods by providing a framework to capture, store, analyze, and share data sets. In the era of big data, both the size and variety of data make it difficult to explore and find data sets of interest and manage the data. Thus, in the context of big data, visualization is critical for checking data consistency and validity, identifying gaps in data coverage, searching for data relevant to an analyst's use cases, and choosing input parameters for analysis. Downloading the data and exploring it on an analyst's desktop using traditional tools are no longer feasible due to the size of the data. This study describes the design and implementation of a visualization system that addresses the problems associated with data exploration within the context of the BDC. Finally, the visualization system is based on a JavaScript front end communicating via REST with a back end web server.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Selenization of CIS and CIGS layers deposited by chemical spray pyrolysis

Cu(In1-xGax)Se2 (CIGS) thin films with x=0 (CIS) and x=0.3 (CIGS) were prepared on Mo-coated glass substrate by using chemical spray pyrolysis at a substrate temperature of 350 degrees C, followed by selenization treatment at 550 degrees C in selenium environment under N2 gas flow. X-ray diffraction patterns of as-deposited CIGS layers on Mo showed polycrystalline chalcopyrite phase with an intense (112) plane. Splitting of (204)/(220) and (116)/(312) planes for the film with x=0.3 reveals deviation of tetragonal nature. Field emission scanning electron microscopy cross-sectional images of selenized films showed clear re-crystallization of grains. During the selenization process of the CIGS absorber, a thin interface layer of MoSe2 is formed. Line mapping of Mo/CIGS layer showed more gallium segregation at the interface of back contact resulting in band gap grading. Chemical composition and mapping of the as-deposited and selenized samples were determined by energy dispersive analysis of X-rays. This work leads to fabrication of low cost and large scale Mo/CIGS/CdS/ZnO/ZnO:Al device structure.

14 SOLAR ENERGY↗

Estimating geographic origins of corn and soybean biomass for biofuel production: A detailed dataset

Sustainable fuel initiatives in the United States such as the Environmental Protection Agency’s Renewable Fuel Stan- dard and the Department of Energy’s Sustainable Aviation Fuel Grand Challenge have increased the production of corn ethanol and soybean biodiesel. However, the lack of precise information regarding biomass sourcing at a localized level has hindered accurate understanding of both biofuel costs and environmental impact of these production pathways. By harnessing the power of geospatial analysis and leveraging United States Department of Agriculture (USDA) crop cen- sus data, this dataset fills this critical knowledge gap. This dataset offers a novel estimation of geospatial biomass sourc- ing for biofuel production in the United States by synthe- sizing 2017 USDA crop census data, biorefinery data from the United States Energy Information Administration, and publicly available information about biomass sourcing for biofuel production. This dataset provides a detailed under- standing of biomass use for first generation biofuel pro- duction, enabling stakeholders to make informed decisions about resource allocation, investment strategies, and infras- tructure development. Furthermore, the county-level gran- ularity of the dataset allows for increased fidelity in the techno-economic assessments and life-cycle analyses of first- generation biofuels in the United States.

09 BIOMASS FUELS↗

Potential existence of post-perovskite nitrides; DFT studies of ThTaN{sub 3}

Within density functional theory, the equations of state for cubic perovskite (c-PV) and hypothetic orthorhombic perovskite (o-PV GdFeO{sub 3}-type) and post-perovskite (PPV) forms of ThTaN{sub 3} are obtained. The decreasing volume and stabilizing energy indicate pressure enabled transitions: c-PV ->o-PV ->PPV. From electronic structure analysis the chemical system is found insulating in the c-PV ground state form with {approx}1eV band gap and semi-conducting for the PPV due to increased covalence. The chemical bonding properties show that Th and Ta bondings with the 2 N sites are selectively differentiated and reinforced for Ta-N bond within PPV form. This is the consequence of the corner as well as edge sharing octahedra characterizing PPV while PV structures have only corner sharing octahedra. It is the first case of potential post-perovskite nitride. - ThTaN{sub 3}: Projected charge density (for 4 fu) onto basal plane: (a) cubic perovskite, (b) orthorhombic perovskite and (c) post-perovskite. Red, green and blue areas are relevant to strong, medium and low localization of density.

36 MATERIALS SCIENCE↗