Search NASA⌕ Search

SEARCH · Search NASA

Results for “uniform method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Adaptive Mesh Refinement for Microelectronic Device Design

Finite element and finite volume methods are used in a variety of design simulations when it is necessary to compute fields throughout regions that contain varying materials or geometry. Convergence of the simulation can be assessed by uniformly increasing the mesh density until an observable quantity stabilizes. Depending on the electrical size of the problem, uniform refinement of the mesh may be computationally infeasible due to memory limitations. Similarly, depending on the geometric complexity of the object being modeled, uniform refinement can be inefficient since regions that do not need refinement add to the computational expense. In either case, convergence to the correct (measured) solution is not guaranteed. Adaptive mesh refinement methods attempt to selectively refine the region of the mesh that is estimated to contain proportionally higher solution errors. The refinement may be obtained by decreasing the element size (h-refinement), by increasing the order of the element (p-refinement) or by a combination of the two (h-p refinement). A successful adaptive strategy refines the mesh to produce an accurate solution measured against the correct fields without undue computational expense. This is accomplished by the use of a) reliable a posteriori error estimates, b) hierarchal elements, and c) automatic adaptive mesh generation. Adaptive methods are also useful when problems with multi-scale field variations are encountered. These occur in active electronic devices that have thin doped layers and also when mixed physics is used in the calculation. The mesh needs to be fine at and near the thin layer to capture rapid field or charge variations, but can coarsen away from these layers where field variations smoothen and charge densities are uniform. This poster will present an adaptive mesh refinement package that runs on parallel computers and is applied to specific microelectronic device simulations. Passive sensors that operate in the infrared portion of the spectrum as well as active device simulations that model charge transport and Maxwell's equations will be presented.

Cwik, Tom↗

Estimating luminosities and stellar masses of galaxies photometrically without determining redshifts

Large direct imaging surveys usually use a template-fitting technique to estimate photometric redshifts for galaxies, which are then applied to derive important galaxy properties such as luminosities and stellar masses. These estimates can be noisy and suffer from systematic biases because of the possible mis-selection of templates and the propagation of the photometric redshift uncertainty. We introduce an algorithm, the Direct Empirical Photometric method (DEmP), that can be used to directly estimate these quantities using training sets, bypassing photometric redshift determination. DEmP also applies two techniques to minimize the effects arising from the non-uniform distribution of training set galaxy redshifts from a flux-limited sample. First, for each input galaxy, fitting is performed using a subset of the training set galaxies with photometry and colors closest to those of the input galaxy. Second, the training set is artificially resampled to produce a flat distribution in redshift or other properties, e.g., luminosity. To test the performance of DEmP, we use a four filter-band mock catalog to examine its ability to recover redshift, luminosity, stellar mass, and luminosity and stellar mass functions. We also compare the results to those from two publicly available template-fitting methods, finding that the DEmP algorithm outperforms both. We find that resampling the training set to have a uniform redshift distribution produces the best results not only in photometric redshift, but also in estimating luminosity and stellar mass. The DEmP method is especially powerful in estimating quantities such as near-IR luminosities and stellar mass using only data from a small number of optical bands.

79 ASTRONOMY AND ASTROPHYSICS↗

Higher-order numerical methods derived from three-point polynomial interpolation

Higher-order collocation procedures resulting in tridiagonal matrix systems are derived from polynomial spline interpolation and Hermitian finite-difference discretization. The equations generally apply for both uniform and variable meshes. Hybrid schemes resulting from different polynomial approximations for first and second derivatives lead to the nonuniform mesh extension of the so-called compact or Pade difference techniques. A variety of fourth-order methods are described and this concept is extended to sixth-order. Solutions with these procedures are presented for the similar and non-similar boundary layer equations with and without mass transfer, the Burgers equation, and the incompressible viscous flow in a driven cavity. Finally, the interpolation procedure is used to derive higher-order temporal integration schemes and results are shown for the diffusion equation.

Rubin, S. G.↗

Superparamagnetic properties of carbon nanotubes filled with NiFe{sub 2}O{sub 4} nanoparticles

Multi walled carbon nanotubes (MWCNTs) were successfully synthesized using custom-made 80 nm pore-size alumina templates, and were uniformly filled with nickel ferrite (NFO) nanoparticles of 7.4 ± 1.7 nm diameter using a novel magnetically assisted capillary action method. X-ray diffraction confirmed the inverse spinel phase for the synthesized NFO. Transmission electron microscopy confirms spherical NFO nanoparticles with an average diameter of 7.4 nm inside MWCNTs. Magnetometry indicates that both NFO and NFO-filled MWCNTs present a blocking temperature around 52 K, with similar superparamagnetic-like behavior, and weak dipolar interactions, giving rise to a super-spin-glass-like behavior at low temperatures. These properties along with the uniformity of sub-100 nm structures and the possibility of tunable magnetic response in variable diameter carbon nanotubes make them ideal for advanced biomedical and microwave applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Free-Vibration Analysis of Rotating Beams by a Variable-Order Finite-Element Method

The free vibration of rotating beams is analyzed by means of a finite-element method of variable order. This method entails displacement functions that are a complete power series of a variable number of terms. The terms are arranged so that the generalized coordinates are composed of displacements and slopes at the element extremities and, additionally, displacements at certain points within the element. The displacement is assumed to be analytic within an element and thus can be approximated to any degree of accuracy desired by a complete power series. Numerical results are presented for uniform beams with zero and nonzero hub radii, tapered beams, and a nonuniform beam with discontinuities. Since the present method reduces to a conventional beam finite-element method for a cubic displacement function, the results are compared and found to be superior to the conventional results in terms of accuracy for a given number of degrees of freedom. Indeed, essentially exact eigenvalues and eigenvectors are obtained with this technique, which is far more rapidly convergent than other approaches in the literature.

Hodges, Dewey H.↗

Interlaboratory Reproducibility of Contour Method Data in a High Strength Aluminum Alloy

The contour method for residual stress measurement has seen significant development, but an experimental reproducibility study utilizing physical samples has not been published. A double-blind reproducibly study is reported, having scope beginning with EDM cutting and ending with residual stress calculation. A reinforced I-beam sample geometry is identified for its unique residual stress profile when extracted from residual stress bearing quenched aluminum bar (7050-T74). Contour measurements are prescribed on a midplane of symmetry with dimensions 24.0 mm by 50.0 mm. Fourteen identically prepared samples are fabricated from a single long bar with well characterized and uniform residual stress. Five samples throughout the bar are identified for planning measurements to validate sample uniformity and overall suitability of the residual stress field. The planning measurements employ a range of techniques: contour method, neutron diffraction, and hole-drilling. Eight samples are distributed to an international group of participants to execute their standard measurement practice. A double-blind process is followed to provide anonymity. Results are provided by eight participants: six being self-similar and two being quite different, the latter set aside as outliers. An average residual stress field is established from non-outlying results and the spatial distribution of reproducibility standard deviation is determined. The average stress field ranges from -60 to 70 MPa and the reproducibility standard deviation averages 8.1 MPa on the measurement plane. The average reproducibility standard deviation is about 3 × larger for points within 1.0 mm of plane boundaries (17.6 MPa) than for the remaining points (6.1 MPa). Reproducibility standard deviation (among different labs) for contour method residual stress measurement is found to be very similar to repeatability standard deviation (in a single lab) reported in prior work. The reproducibility observed here, for the entire measurement process, is also similar to that found in a prior reproducibility study limited to contour method data analysis.

36 MATERIALS SCIENCE↗

Estimating Inducer Blade Damping in Water with On-Blade Strain Measurements

This paper describes the testing, methodology, and results for estimating critical damping ratios of inducer blade structural natural frequencies. A sub-scale inducer water flow test was performed with on-blade strain gauge measurements. Data were acquired in quiescent air and water, and also at several shaft speeds and operating conditions. Two methods were used to provide active excitation to the blades. The first was to impart a mechanical impulse to the inducer shaft and observe the strain gauge response. The second was to install a stator plate upstream of the inducer to create a non-uniform but regular pressure field at the inducer inlet. There are challenges with using either approach, but damping information was extracted using both methods. Results showed that the critical damping ratio for a given blade mode increased from air to quiescent water, and also increased when the inducer was spinning.

Mulder, Andrew↗

Synthesis of novel photocatalytic RGO-InVO{sub 4} nanocomposites with visible light photoactivity

Graphical abstract: A facile method for preparation of reduced graphene oxide (RGO) sheets supported indium vanadate (InVO{sub 4}) photocatalysts is reported. The visible light response and adsorption ability of RGO-InVO{sub 4} nanocomposites is greatly improved, which can effectively remove methyl orange and Cr (VI) from water. - Highlights: • Supramolecular photocatalyst of RGO-InVO{sub 4} was achieved. • Reduction of GO and preparation of RGO-InVO{sub 4} was simultaneous. • The prepared RGO-InVO{sub 4} shows high photocatalytic activity and adsorption capacity under visible light. • In situ growth of uniform InVO{sub 4} particles on RGO sheets is facile and efficient - Abstract: In this study, we report a facile method for preparation of reduced graphene oxide (RGO) sheets supported indium vanadate (InVO{sub 4}) photocatalysts. A wide range of characterization techniques, such as Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, Thermogravimetric analysis and Transmission electron microscopy were applied to characterize the obtained composites. The results indicated that the composites consist of uniformly dispersed InVO{sub 4} nanocrystals on RGO sheets. Visible light responses of RGO-InVO{sub 4} nanocomposites are greatly improved as compared with the bulk InVO{sub 4}. The as-prepared RGO-InVO{sub 4} nanocomposites can effectively remove methyl orange and Cr (VI) from water under visible light irradiation, which can be used as novel photocatalysts for environmental protection.

36 MATERIALS SCIENCE↗

Unstructured Grid Adaptation and Solver Technology for Turbulent Flows

Unstructured grid adaptation is a tool to control Computational Fluid Dynamics (CFD) discretization error. However, adaptive grid techniques have made limited impact on production analysis workflows where the control of discretization error is critical to obtaining reliable simulation results. Issues that prevent the use of adaptive grid methods are identified by applying unstructured grid adaptation methods to a series of benchmark cases. Once identified, these challenges to existing adaptive workflows can be addressed. Unstructured grid adaptation is evaluated for test cases described on the Turbulence Modeling Resource (TMR) web site, which documents uniform grid refinement of multiple schemes. The cases are turbulent flow over a Hemisphere Cylinder and an ONERA M6Wing. Adaptive grid force and moment trajectories are shown for three integrated grid adaptation processes with Mach interpolation control and output error based metrics. The integrated grid adaptation process with a finite element (FE) discretization produced results consistent with uniform grid refinement of fixed grids. The integrated grid adaptation processes with finite volume schemes were slower to converge to the reference solution than the FE method. Metric conformity is documented on grid/metric snapshots for five grid adaptation mechanics implementations. These tools produce anisotropic boundary conforming grids requested by the adaptation process.

Park, Michael A.↗

Trumpet-puncture initial data for black holes

We propose a new approach, based on the puncture method, to construct black hole initial data in the so-called trumpet geometry, i.e. on slices that asymptote to a limiting surface of nonzero areal radius. Our approach is easy to implement numerically and, at least for nonspinning black holes, does not require any internal boundary conditions. We present numerical results, obtained with a uniform-grid finite-difference code, for boosted black holes and binary black holes. We also comment on generalizations of this method for spinning black holes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlating Nb-SRF Surface Processing with Evolution of Surface Electronic States

The few nanometers of the surface exposed to RF field plays a major role in defining the RF performance of superconducting cavities. Over the past two decades, several pioneering surface treatment and processing methods have emerged, enabling remarkable improvements in cavity performance by simultaneously achieving high Q with increasing Eacc. These processing methods include: thermal treatment under ultra-high vacuum (UHV) conditions across lo¬¬¬¬¬¬¬w-, mid-, and high-temperature ranges and high temperature treatments under controlled N2 atmosphere. These processes also produce distinct surface oxide configurations with different valence states, thicknesses, and uniformity, as well as different oxygen concentration profiles in bulk Nb. In this work, we are trying to understand how do surface-processing methods and the resulting oxide/oxygen profiles affect the electronic structure of surface and the mechanism of superconductivity? With the help of Fermilab’s in-house X-ray photoemission facility and, in collaboration with the synchrotron-based angle-resolved photoemission (ARPES) facility at Argonne National Laboratory, we are investigating how the valence band structure and density of states (DoS) near the Fermi level modify with different surface treatments. Our observations show that different surface-processing methods lead to distinct evolutions of the valence-band states near the Fermi level during the superconducting transition. This behavior suggests variations in Nb-O orbital hybridizations and points towards the possibility of different underlying mechanisms of superconductivity governed by the surface chemistry and oxide configuration. We also correlate these distinct superconducting mechanisms with RF cavity performance, specifically focusing on measured surface resistance, the nature of the Q-slope, and quench fields observed in SRF measurements. These results will enable us to identify the potential limiting factors and relevant controllable parameters that can be further optimized to improve the performance of SRF cavities.

Tripathi, Malvika [Fermilab]↗

Tailoring the Stiffness of Large Mirrors to Reduce Specific Optical Aberrations

Presented is a method that tailors the geometry of a mirror’s core structure as well as the mounting interface such that a desired set of aberrations is reduced. It will be shown that targeting specific aberrations as opposed to reducing overall surface figure error (SFE) is a valid method to reduce weight or improve performance. Analyzed first is the self-weight deflection of a thin circular plate of uniform thickness continuously supported along its outer edge. The Kirchhoff-Love plate bending equations are related to the radially symmetric Zernike polynomials of piston, defocus, and primary spherical aberration. Next, the mirror’s radial thickness is optimized to eliminate primary and secondary spherical aberrations when the outer edge is simply supported. As an example, the method is demonstrated using a 2-meter diameter aluminum mirror where surface deflections can have an appreciable effect at mid-to-near infrared wavelengths

mirror stiffness optimization↗

A Study on Surface Texture and Wettability of Femtosecond Laser Treated Aluminum Alloys

This research aims to study the effects of femtosecond laser treatment on surface texture and wettability properties. The first portion of this research studies 2024-T3 aluminum alloy concerning surface texture (e.g., roughness), wettability, and surface free energy. SEM images help aid the researchers in detecting minuscule changes in surface texture. Profilometry extracts topographical data from the surface. A contact angle goniometer measures contact angle, which follows the sessile drop method. Owens, Wendt, Rabel, and Kaelble's method calculates the surface free energy in conjunction with the contact angle. Femtosecond laser modification produces relatively uniform surface morphology at the macroscale. When looking at the microscale, surface morphology differs depending on the interplay between material melting and self-assembly, where the surface becomes rougher after laser treatment. Contact angle results show that all but the control sample and sample 7 exhibit hydrophobic behavior, i.e., contact angle >90°, with Sample 1 having the most significant angle of 115°. The effects of laser parameters on surface energy is apparent. More work is needed to establish correlations among these three quantities: contact angle, surface energy, and laser parameters. The second portion of this research studies aluminum alloy 6061 as the subject material with the primary goal of creating a superhydrophobic surface. A central composite design creates the laser surface texturing design of experiments. SEM images help aid the researchers in detecting minuscule changes in surface texture. A 3D optical profiler extracts topographical data from the surface. The sessile drop method incorporates a contact angle goniometer to measure the contact angle. The response surface method builds a second-order polynomial model for the contact angle and obtains optimized parameters to maximize the contact angle. This research shows that laser surface texturing can generate a wide range of surface profiles and roughness values with geometric features ranging from hundreds of μm to submicron. All three laser parameters (pulse energy, pulse duration, repetition rate) affect surface roughness and contact angle to some degree. To quantify the relationship between the contact angle, pulse energy, and pulse repetition rate, a response surface model for Al 6061 is identified and used to find the optimal conditions of E=214 μJ, tp=10 ps, and fp=2427 Hz with a predicted maximum contact angle of 161°. A confirmation experiment produces a contact angle of 168°, in good agreement with the predicted value.

Angell, Dakota↗

Evaluation of the constant potential method in simulating electric double-layer capacitors

A major challenge in the molecular simulation of electric double layer capacitors (EDLCs) is the choice of an appropriate model for the electrode. Typically, in such simulations the electrode surface is modeled using a uniform fixed charge on each of the electrode atoms, which ignores the electrode response to local charge fluctuations in the electrolyte solution. In this work, we evaluate and compare this Fixed Charge Method (FCM) with the more realistic Constant Potential Method (CPM), [S. K. Reed et al., J. Chem. Phys. 126, 084704 (2007)], in which the electrode charges fluctuate in order to maintain constant electric potential in each electrode. For this comparison, we utilize a simplified LiClO{sub 4}-acetonitrile/graphite EDLC. At low potential difference (ΔΨ ⩽ 2 V), the two methods yield essentially identical results for ion and solvent density profiles; however, significant differences appear at higher ΔΨ. At ΔΨ ⩾ 4 V, the CPM ion density profiles show significant enhancement (over FCM) of “inner-sphere adsorbed” Li{sup +} ions very close to the electrode surface. The ability of the CPM electrode to respond to local charge fluctuations in the electrolyte is seen to significantly lower the energy (and barrier) for the approach of Li{sup +} ions to the electrode surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Helical Tomotherapy vs. Intensity-Modulated Proton Therapy for Whole Pelvis Irradiation in High-Risk Prostate Cancer Patients: Dosimetric, Normal Tissue Complication Probability, and Generalized Equivalent Uniform Dose Analysis

Purpose: To compare intensity-modulated proton therapy (IMPT) and helical tomotherapy (HT) treatment plans for high-risk prostate cancer (HRPCa) patients. Methods and Materials: The plans of 8 patients with HRPCa treated with HT were compared with IMPT plans with two quasilateral fields set up (-100{sup o}; 100{sup o}) and optimized with the Hyperion treatment planning system. Both techniques were optimized to simultaneously deliver 74.2 Gy/Gy relative biologic effectiveness (RBE) in 28 fractions on planning target volumes (PTVs)3-4 (P + proximal seminal vesicles), 65.5 Gy/Gy(RBE) on PTV2 (distal seminal vesicles and rectum/prostate overlapping), and 51.8 Gy/Gy(RBE) to PTV1 (pelvic lymph nodes). Normal tissue calculation probability (NTCP) calculations were performed for the rectum, and generalized equivalent uniform dose (gEUD) was estimated for the bowel cavity, penile bulb and bladder. Results: A slightly better PTV coverage and homogeneity of target dose distribution with IMPT was found: the percentage of PTV volume receiving {>=}95% of the prescribed dose (V{sub 95%}) was on average >97% in HT and >99% in IMPT. The conformity indexes were significantly lower for protons than for photons, and there was a statistically significant reduction of the IMPT dosimetric parameters, up to 50 Gy/Gy(RBE) for the rectum and bowel and 60 Gy/Gy(RBE) for the bladder. The NTCP values for the rectum were higher in HT for all the sets of parameters, but the gain was small and in only a few cases statistically significant. Conclusions: Comparable PTV coverage was observed. Based on NTCP calculation, IMPT is expected to allow a small reduction in rectal toxicity, and a significant dosimetric gain with IMPT, both in medium-dose and in low-dose range in all OARs, was observed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Luminescence properties of core-shell structured SiO{sub 2}-CaMoO{sub 4}:Eu{sup 3+} phosphor

Uniform SiO{sub 2}-CaMoO{sub 4}:Eu{sup 3+} red phosphor has been synthesized by sol-gel method, and its luminescence properties have been studied by fluorescence spectrometer. The structure and morphology of the SiO{sub 2}-CaMoO{sub 4}:Eu{sup 3+} red phosphor have been investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and FT-IR spectrometer. Results indicate that phosphor particles have a core-shell structure and the thickness of the SiO{sub 2}-shell is about 60 nm. In addition, the luminescent intensity of SiO{sub 2}-CaMoO{sub 4}:Eu{sup 3+} red phosphor has been greatly enhanced with respect to CaMoO{sub 4}:Eu{sup 3+} phosphor. But the lifetime {tau} value of SiO{sub 2}-coated CaMoO{sub 4}:Eu{sup 3+} is slightly smaller than that of non-coated CaMoO{sub 4}:Eu{sup 3+}. - Graphical abstract: A SiO{sub 2} nano-layer with thickness of 60 nm and good uniformity was successfully coated on the surface of CaMoO{sub 4}:Eu{sup 3+} phosphor. This coating greatly increases luminescent intensity of the phosphor. Highlights: Black-Right-Pointing-Pointer SiO{sub 2}-CaMoO{sub 4}:Eu{sup 3+} was successfully synthesized by sol-gel method. Black-Right-Pointing-Pointer The SiO{sub 2} nano-layer increases luminescent intensity of the phosphor. Black-Right-Pointing-Pointer The SiO{sub 2} nano-layer reduces fluorescence lifetime of the phosphor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗