Search NASA⌕ Search

SEARCH · Search NASA

Results for “Defect modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Enhanced Luminescent Stability through Particle Interactions in Silicon Nanocrystal Aggregates

Close-packed assemblies of ligand-passivated colloidal nanocrystals can exhibit enhanced photoluminescent stability, but the origin of this effect is unclear. Here, we use experiment, simulation, and ab initio computation to examine the influence of interparticle interactions on the photoluminescent stability of silicon nanocrystal aggregates. The time-dependent photoluminescence emitted by structures ranging in size from a single quantum dot to agglomerates of more than a thousand is compared with Monte Carlo simulations of noninteracting ensembles using measured single-particle blinking data as input. In contrast to the behavior typically exhibited by the metal chalcogenides, the measured photoluminescent stability shows an enhancement with respect to the noninteracting scenario with increasing aggregate size. We model this behavior using time-dependent density functional theory calculations of energy transfer between neighboring nanocrystals as a function of nanocrystal size, separation, and the presence of charge and/or surface-passivation defects. In conclusion, our results suggest that rapid exciton transfer from “bright” nanocrystals to surface trap states in nearest-neighbors can efficiently fill such traps and enhance the stability of emission by promoting the radiative recombination of slowly diffusing excited electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Bandgap recovery of monolayer MoS 2 using defect engineering and chemical doping

Two-dimensional transition metal dichalcogenide materials have created avenues for exciting physics with unique electronic and photonic applications. Among these materials, molybdenum disulfide is the most known due to extensive research in understanding its electronic and optical properties. In this paper, we report on the successful growth and modification of monolayer MoS 2 (1L MoS 2 ) by controlling carrier concentration and manipulating bandgap in order to improve the efficiency of light emission. Atomic size MoS 2 vacancies were created using a Helium Ion Microscope, then the defect sites were doped with 2,3,5,6-tetrafluro7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The carrier concentration in intrinsic (as-grown) and engineered 1L MoS 2 was calculated using Mass Action model. The results are in a good agreement with Raman and photoluminescence spectroscopy as well as Kelvin probe force microscopy characterizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multichannel photoelectron phase lag across atomic barium autoionizing resonances

Phase lag associated with coherent control where an excited system decays into more than one product channel has been subjected to numerous investigations. Although previous theoretical studies have treated the phase lag across resonances in model calculations, quantitative agreement has never been achieved between the theoretical model and an experimental measurement of the phase lag from the ω-2ω ionization of atomic barium. Yamazaki and Elliot, Phys. Rev. Lett. 98, 053001 (2007); Phys. Rev. A 76, 053401 (2007), suggesting that a toy model with phenomenological parameters is inadequate to describe the observed phase lag behavior. Here the phase lag is treated quantitatively in a multichannel coupling formulation, and our calculation based on a multichannel quantum defect and R-matrix treatment achieves good agreement with the experimental observations. Our treatment also develops formulas to describe the effects of hyperfine depolarization on multiphoton ionization processes. Moreover, we identify resonances between Ba + 5d 3/2 and 5d 5/2 thresholds that have apparently never been experimentally observed and classified.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2015

Generalized Rate Theory for Void and Bubble Swelling and its Application to Plutonium Metal Alloys

In the classical rate theory for void swelling, vacancies and self-interstitials are produced by radiation in equal numbers, and in addition, thermal vacancies are also generated at the sinks, primarily at edge dislocations, at voids, and at grain boundaries. In contrast, due to the high formation energy of self-interstitials for normal metals and alloys, their thermal generation is negligible, as pointed out by Bullough and Perrin. However, recent DFT calculations of the formation energy of self-interstitial atoms in bcc metals have revealed that the sum of formation and migration energies for self-interstitials atoms (SIA) is of the same order of magnitude as for vacancies. The ratio of the activation energies for thermal generation of SIA and vacancies is presented. For fcc metals, this ratio is around three, but for bcc metals it is around 1.5. Reviewing theoretical predictions of point defect properties in δ-Pu, this ratio could possibly be less than one. As a result, thermal generation of SIA in bcc metals and in plutonium must be taken into considerations when modeling the growth of voids and of helium bubbles, and the classical rate theory (CRT) for void and bubble swelling must be extended to a generalized rate theory (GRT).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Revealing the Atomic Origin of Heterogeneous Li-Ion Diffusion by Probing Na

Tracing the dynamic process of Li-ion transport at the atomic scale is a long-cherished wish in solid state ionics and essential for battery material engineering. Approaches via phase change, strain, and valence states of redox species are developed to circumvent the technical challenge of direct imaging Li, however, all are limited by poor spatial resolution and weak correlation with state-of-charge (SOC). Here, we adopt an ion-exchange approach by sodiating the de-lithiated cathode and probing Na distribution to trace the Li de-intercalation, which enables us to visualize the heterogeneous Li-ion diffusion down to atomic level. In the model LiNi1/3Mn1/3Co1/3O2 cathode, dislocation-mediated ion diffusion is kinetically favorable at low SOC and planar diffusion along (003) layers dominates at high SOC, which work synergistically to determine the ion diffusion dynamics. Our work unveils the heterogeneous nature of ion diffusion in battery material and stresses the role of defect engineering in tailoring ion transport kinetics.

Xiao, Biwei↗
DOE OSTI2016

Cathodoluminescence spectrum imaging analysis of CdTe thin-film bevels

We conducted T = 6 K cathodoluminescence (CL) spectrum imaging with a nanoscale electron beam on beveled surfaces of CdTe thin films at the critical stages of standard CdTe solar cell fabrication. We find that the through-thickness CL total intensity profiles are consistent with a reduction in grain-boundary recombination due to the CdCl 2 treatment. The color-coded CL maps of the near-band-edge transitions indicate significant variations in the defect recombination activity at the micron and sub-micron scales within grains, from grain to grain, throughout the film depth, and between films with different processing histories. We estimated the grain-interior sulfur-alloying fraction in the interdiffused CdTe/CdS region of the CdCl 2 -treated films from a sample of 35 grains and found that it is not strongly correlated with CL intensity. A kinetic rate-equation model was used to simulate grain-boundary (GB) and grain-interior CL spectra. Simulations indicate that the large reduction in the exciton band intensity and relatively small decrease in the lower-energy band intensity at CdTe GBs or dislocations can be explained by an enhanced electron-hole non-radiative recombination rate at the deep GB or dislocation defects. Additionally, simulations also show that higher GB concentrations of donors and/or acceptors can increase the lower-energy band intensity, while slightly decreasing the exciton band intensity.

14 SOLAR ENERGY↗
DOE OSTI2020

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging

Laser powder bed fusion (LPBF) is an emerging metal additive manufacturing process. The gas-driven powder motions in laser powder bed fusion have significant influence on the build quality. However, the transient powder-gas interaction has not been well understood due to the challenges in quantitative experiment measurements. In this work, the powder-gas interaction for a single pulse laser illuminating on the powder bed is studied. We establish a multi-physics model to simulate the complex liquid/gas flow as well as the gas-driven powder motions, which is substantiated by high-speed synchrotron x-ray imaging. We identify and quantify four characteristic modes of powder-gas interaction in LPBF. The motion of a powder is controlled by one or multiple interaction modes collectively. As revealed by simulations and confirmed by experiments, powders can merge into the molten pool from its rim, be ejected at different divergence angles (powder spattering), or dive into the molten pool to cause significant molten pool fluctuation. Overall, our results provide insights toward the driving forces controlling the dynamic powder behavior, which pave the way for reducing structure defects during the build process.

36 MATERIALS SCIENCE↗
DOE OSTI2022

AGR-5/6/7 Final Release-to-Birth Ratio Data Analysis

AGR-5/6/7 is the last of a series of Advanced Gas Reactor (AGR) experiments conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) in support of development and qualification of tristructural isotropic (TRISO) low-enriched fuel for use in the high-temperature gas cooled reactor (HTGR). AGR configuration and irradiation conditions are based on prismatic HTGR technology that is distinguished primarily through the use of helium coolant, a low-power-density ceramic core capable of withstanding very high temperatures, and TRISO-coated particle fuel. The AGR tests provide valuable irradiation-performance data to support fuel process development, qualify fuel for normal operation and accident conditions, and support development and validation of fuel performance and fission-product (FP) transport models and codes. Each AGR test consists of multiple independently controlled and monitored capsules containing fuel compacts placed in a graphite cylinder shrouded by a steel shell. Release-to-birth ratios (R/B) for fission-gas isotopes released from each capsule are calculated from release rates, measured by germanium detectors in the Fission Product Monitoring System (FPMS) installed downstream from each capsule, and birth rates calculated using numerical models of FG generation. The R/Bs are a critical measure of the ability of the fuel kernel, the particle coating layers, and the compact matrix to retain fission-gas atoms, preventing their release into the sweep-gas flow, and the impact of initially defective particles and/or particle-coating failures that occur during irradiation. For fission-gas isotopes, particle failure is defined as failure of all coating layers, allowing gaseous fission atoms to escape from a particle. During the first five cycles (162B ? 165A), R/Bs were stable in the 10-8?10-6 range, and no in-pile particle failures were observed, based on the gross gamma counts. The maximum R/B value of around 2 ? 10-6 for Kr-85m resulted from the presence of as-fabricated exposed kernels (based on the high exposed kernel fraction), the dispersed uranium, and high fuel particle temperatures in Capsule 1. Comparison of capsule-measured R/Bs from these early cycles to predictions using the previously developed AGR R/B model demonstrated FG release from the AGR-5/6/7 TRISO fuel was comparable to that of previous experiments. In addition, the Kr-85m R/B per-exposed-kernel values are comparable to R/B values obtained in AGR-3/4 irradiation experiment and four irradiation experiments performed during 1980s: (1) HRB-17/18, (2) COMEDIE-BD1, (3) HFR B1, and (4) HRB-21. In contrast, all measured R/B values are lower than predictions by the commonly used Richards and German models, which are intentionally conservative. A large number of in-pile particle failures occurred in Capsule 1 by the end of Cycle 166A. During the final four cycles (166A ? 168A), apparent damage to the Capsule 1 gas line appeared to cause FG leakage from that capsule into the other four capsules, resulting in an increase in fission gas (FG) detected in the effluent for all capsules. Isolation of the Capsule 1 gas line during the last three cycles also prevented measurement of its FG release. Thus, R/Bs in all capsules after Cycle 166A are highly uncertain because of undefined amount of leakage from Capsule 1, especially for long-lived isotopes. A few hundred in-pile particle failures were estimated for Capsule 1 before the end of Cycle 166A, but the total number of failures is unknown due to the lack of FG release data in the later cycles. Based primarily on evidence from the gross gamma counts during Cycle 168A, approximately 15 particles failed in Capsule 3 and four particles failed in Capsule 2. In-pile failures in Capsule 3 were anticipated because this capsule was designed to operate beyond the HTGR normal operating temperature range. In contrast, no in-pile failures were identified in the top two capsules (4 and 5) based on the absence of the typical spikes in gross gamma counts and low failure estimates using the AGR model, developed in INL/EXT-14-32970, for R/B of the short-lived isotopes (Kr-89 and Xe-137) with minimal leakage from Capsule 1.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Effect of atomic-scale defects and dopants on phosphorene electronic structure and quantum transport properties

By means of a multi-scale first-principles approach, a description of the local electronic structure of 2D and narrow phosphorene sheets with various types of modifications is presented. Firtly, a rational argument based on the geometry of the pristine and modified P network, and supported by the Wannier functions formalism is introduced to describe a hybridization model of the P atomic orbitals. Ab initio calculations show that non-isoelectronic foreign atoms form quasi-bound states at varying energy levels and create different polarization states depending on the number of valence electrons between P and the doping atom. The quantum transport properties of modified phosphorene ribbons are further described with great accuracy. The distortions on the electronic bands induced by the external species lead to strong backscattering effects on the propagating charge carriers. Depending on the energy of the charge carrier and the type of doping, the conduction may range from the diffusive to the localized regime. Interstitial defects at vacant sites lead to homogeneous transport fingerprints across different types of doping atoms. We suggest that the relatively low values of charge mobility reported in experimental measurements may have its origin in the presence of defects.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Microstructure prediction for Ti-22Al-25Nb in laser powder bed fusion

This work presents a physics-informed framework for predicting solidification morphology and defect susceptibility in additively manufactured Ti–22Al–25Nb across a broad processing space. The framework integrates solidification microstructure selection (SMS) analysis with a single-track defect-based printability map to establish a unified methodology linking processing parameters to both interfacial morphology and manufacturability. Thermal gradients G and solidification rates R are first computed using the Thermo-Calc Additive Manufacturing (TC-AM) module, a finite-interface-dissipation (FID) phase-field (PF) model coupled with CALPHAD method is then employed to systematically distinguish planar and dendritic regimes as functions of $G$ and $R$. By superimposing the printability map onto the morphology projections, a comprehensive process–structure framework is obtained. Across most processing conditions, the predicted microstructure is predominantly dendritic, while planar growth emerges only under selected laser power $P$ and scan speed $v$ combinations. In addition to morphology classification, the framework quantifies the dendritic area fraction and introduces a width-based morphology descriptor to characterize the spatial extent of planar/dendritic regions within the melt pool. It provides mechanistic insight into the interplay between solidification physics and defect formation, offering practical guidance for parameter selection and microstructural control in Ti–22Al–25Nb additive manufacturing (AM).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic states of atomic vacancies in graphite probed by scanning tunneling microscopy

Intrinsic defects in graphitic materials, like vacancies and edges, have been expected to possess magnetic states from the many-body interaction of localized electrons. However, charge screening from graphite bulk carriers significantly reduces the localization effect and hinders the observation of those magnetic states. Here, we use an ultra-low-temperature scanning tunneling microscope with a high magnetic field to observe the magnetic states of atomic vacancies in graphite generated by ion sputtering. Scanning tunneling spectroscopy reveals localized states at the vacancies, which exhibit splitting at a certain magnetic field whose separation increases with the field strength. The transition is well described by the “Anderson model,” which describes the emergence of localized magnetic states inside the metallic reservoir through electron–electron interaction. The interaction strength is estimated to be between 1 meV and 3 meV, which is supported by the density functional theory calculation. The observation provides an important foundation for application of intrinsic defects to carbon-based spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Computational Study of Short-Pulse Laser-Induced Generation of Crystal Defects in Ni-Based Single-Phase Binary Solid–Solution Alloys

Single-phase concentrated solid–solution alloys exhibit enhanced mechanical characteristics and radiation damage resistance, making them promising candidate materials for applications involving an exposure to rapid localized energy deposition. We use large-scale atomistic modeling to investigate the mechanisms of the generation of vacancies, dislocations, stacking faults, and twin boundaries in Ni, Ni 50 Fe 50 , Ni 80 Fe 20 , and Ni 80 Cr 20 targets irradiated by short laser pulses in the regime of melting and resolidification. The decrease in the thermal conductivity and strengthening of the electron–phonon coupling due to the intrinsic chemical disorder in the solid-solution alloys are found to have important implications on localization of the energy deposition and generation of thermoelastic stresses. The interaction of the laser-induced stress waves with the melting front is found to play a key role in roughening of the crystal–liquid interface and generation of dislocations upon the solidification. A common feature revealed in the structural analysis of all irradiated targets is the presence of high vacancy concentrations exceeding the equilibrium values at the melting temperature by about an order of magnitude. On the basis of the results of molecular dynamics simulations of solidification occurring at fixed levels of undercooling, the generation of vacancies is correlated with the velocity of the solidification front, and the processes responsible for creating the strong vacancy supersaturation are revealed. The suppression of the vacancy generation in the solid–solution alloys is also revealed and related to combined effect of enhanced vacancy mobility and higher energy of the vacancy formation in the alloy systems. The analysis of the first atomic shells surrounding the vacancy sites in Ni–Fe alloys uncovers the preference for the vacancy sites to be surrounded by Fe atoms and suggests that atomic-scale chemical heterogeneities may play an important role in defining the behavior and properties of the single-phase concentrated solid-solution alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Disconnection-Mediated Transition in Segregation Structures at Twin Boundaries

Twin boundaries play an important role in the thermodynamics, stability, and mechanical properties of nanocrystalline metals. Understanding their structure and chemistry at the atomic scale is key to guide strategies for fabricating nanocrystalline materials with improved properties. In this work, we report an unusual segregation phenomenon at gold-doped platinum twin boundaries, which is arbitrated by the presence of disconnections, a type of interfacial line defect. By using atomistic simulations, we show that disconnections containing a stacking fault can induce an unexpected transition in the interfacial-segregation structure at the atomic scale, from a bilayer, alternating-segregation structure to a trilayer, segregation-only structure. This behavior is found for faulted disconnections of varying step heights and dislocation characters. Supported by a structural analysis and the classical Langmuir–McLean segregation model, we reveal that this phenomenon is driven by a structurally induced drop of the local pressure across the faulted disconnection accompanied by an increase in the segregation volume.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Manipulating transmission and reflection properties of a photonic crystal doped with quantum dot nanostructures

The transmission and reflection properties of incident light in a defect dielectric structure is studied theoretically. The defect structure consists of donor and acceptor quantum dot nanostructures embedded in a photonic crystal. It is shown that the transmission and reflection properties of incident light can be controlled by adjusting the corresponding parameters of the system. The role of dipole–dipole interaction is considered as a new parameter in our calculations. It is noted that the features of transmission and reflection curves can be adjusted in the presence of dipole–dipole interaction. It is found that the absorption of weak probe light can be converted to the probe amplification in the presence of dipole–dipole interaction. Moreover, the group velocity of transmitted and reflected probe light is discussed in detail in the absence and presence of dipole–dipole interaction. Our proposed model can be used as a new all-optical devices based on photonic materials doped with nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Influence of humidity on the characteristics of positive corona discharge in air

Detailed positive corona discharge characteristics, such as the corona onset voltage, pulse amplitude, repetition frequency, average corona current, rise time, and half-wave time, are systematically studied under different air humidity with a single artificial defect electrode. The experimental results indicate that the pulse amplitude decreases with the increase of air humidity; meanwhile, the repetition frequency increases as the air humidity increases. This phenomenon is different from that of negative corona discharge. Therefore, to have an insight into the mechanism of humidity influence on positive corona discharge, a positive corona discharge model based on the continuity equations is utilized. The simulations present a dynamic development of positive corona discharge and, meanwhile, reveal the humidity influence on positive corona discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗