SEARCH · Search NASA
Results for “Carbides”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Proposing the prospects of Ti 3 CN transition metal carbides (MXenes) as anodes of Li-ion batteries: a DFT study
A two-dimensional (2D) transition metal carbonitride (MXenes) with a formula of Ti3CN as an anode of a lithium-ion battery (LIB) has been proposed in this work. The mechanism of Li+ adsorption and diffusion on the surface of Ti3CN and Ti3CNT2 (T = F, O, and OH functional groups) was studied to estimate the potential application of Ti3CN as an anode material by density functional theory (DFT) and DFT+U computations. For Ti3CNT2 (T = O, F, OH), the value of Li diffusion barriers is from 0.2 eV to 0.3 eV. On the basis of our results, we can know that Li prefers adsorption on the nitrogen side for Ti3CN in the absence of functional groups and tends to adsorb on the carbon side for Ti3CNT2 (T = O, F, OH). This phenomenon can be explained by Bader charge population analysis. For Ti3CNF2, Li–F formed a six-membered ring with increasing Li concentration, thereby making the system more stable. This work contributes to offering perspectives for carbonitride systems (MXenes) as LIB anodes.
Rational control of the interlayer space inside two-dimensional titanium carbides for highly efficient uranium removal and imprisonment
Rational control of the interlayer space of multilayered Ti 3 C 2 T x enables the MXene to exhibit an excellent U( vi ) sorption capacity and an exceptional radionuclide encapsulation performance.
Charge transfer induced polymerization of EDOT confined between 2D titanium carbide layers
In situ polymerization of 3,4-ethylenedioxythiophene (EDOT) is achieved on the surface of 2D Ti 3 C 2 T x MXene without using any oxidant, resulting in improved lithium ion storage capability of Ti 3 C 2 T x /poly-EDOT hybrids.
Impact of metastable graphene-diamond coatings on the fracture toughness of silicon carbide
The phase-transition of atomically thin graphene coating into a diamond phase increases the hardness and the fracture toughness of SiC even for indentation depths of 10 μm compared to bare SiC, which is against the general indirect relation.
Sub-bandgap light-induced carrier generation at room temperature in 4H-SiC Metal Oxide Semiconductor capacitors.
Abstract not provided.
Acoustic waveguiding in a silicon carbide phononic crystals at microwave frequencies
Two dimensional SiC–air phononic crystals have been modeled, fabricated, and tested with a measured bandgap ranging from 665 to 693 MHz. Snowflake air inclusions on a hexagonal lattice were used for the phononic crystal. By manipulating the phononic crystal lattice and inserting circular inclusions, a waveguide was created at 680 MHz. The combined insertion loss and propagation loss for the waveguide is 8.2 dB, i.e., 39% of the energy is guided due to the high level of the confinement afforded by the phononic crystal. In conclusion, the SiC–air phononic crystals and waveguides were fabricated using a CMOS-compatible process, which allows for seamless integration of these devices into wireless communication systems operating at microwave frequencies.
Stability of SiC and SiN interfaces in titanium carbide and nitride based heterostructures
First-principles molecular dynamics simulations of the stability of the NaCl-type (B1) SiC and SiN interfaces in TiX/one multilayer SiY (X,Y=C,N) heterostructures were carried out as functions of temperature. It was previously shown that the SiX interfaces in the heterostructures based on transition metal compounds could be dynamically unstable owing to the elongated interfacial Si-X bonds compared to the Si-X bonds in the B1-SiX phases in equilibrium. However, this criterion is not satisfied for some SiX(111) interfaces. The aim of this work is to study the temperature-induced changes in the structure of the heterostructures under consideration and to clarify a possible origin of instability of the interfaces in them. It is shown that, at finite temperatures, the interfacial layer in the TiN(001)/SiC heterostructure transforms into the zinc blende-type (B3) SiC-like layer, whereas the interfaces in other (001) heterostructures transform into amorphous-like interfacial layers. The TiC(111)/SiC and TiN(111)/SiN heterostructures are stable up to 1400 K. The TiN(111)/B3-like SiC and TiC(111)/B3-like SiN systems form during static relaxation of the initial heterostructures. The phase transformations of the interfaces are explained in terms of dynamical and elastic stability criteria. In contrast to the (111) interfacial layers, all the B1-(001) interfaces are found to be dynamically unstable. The formation of the B3-(111) interfaces occurs due to the elastic instability of the corresponding B1-(111) interface
Effect of substrate temperature on sputter-deposited boron carbide films
Sputter deposition of B4C films with tailored physical properties remains a challenge. Here, we systematically study how substrate temperature influences the properties of B4C films deposited by direct current magnetron sputtering onto planar substrates held at temperatures in the range of 100-510°C. Results show that all films are amorphous stoichiometric B4C, with low O content of ~1 at. %. Films deposited onto substrates at 100°C exhibit high compressive residual stress and decreased mechanical properties. Therefore, for elevated substrate temperatures in the range of 180-510°C, film mass density, surface roughness, Young’s modulus, and hardness are weakly dependent on substrate temperature. However, in this temperature range, an increase in substrate temperature leads to larger residual compressive stress accompanied by a corresponding reduction in the concentration of nanoscale inhomogeneities. At least for the landing atom ballistics conditions studied here, a substrate temperature range of ~185-250°C is optimum for growing films with near-zero intrinsic residual stress. The overall weak substrate temperature dependence of film properties revealed in this work is favorable for the development of a robust deposition process, particularly for the case of deposition onto non-planar substrates where temperature control is often challenging.
Magnetron sputter deposition of boron carbide in Ne and Ar plasmas
Conventional magnetron sputter deposition of B 4 C uses Ar as the working gas. In this report we explore the magnetron sputter deposition of B 4 C with a Ne plasma, which is expected to exhibit larger sputtering yields than Ar. We study properties of films deposited with different substrate tilt angles with the magnetron source operated in either direct-current (DC) or radio-frequency (RF) mode in an Ar or Ne plasma. Results show that the B 4 C film properties are determined by a combination of sputtering ballistics and effects of the working gas on the plasma discharge and gas phase scattering of depositing species flux. At constant discharge power, deposition rates for Ar and Ne plasmas are similar, which is attributed to balancing effects of a higher ballistic sputtering yield of Ne and lower ion flux to the target. Both depositing B and C neutral species and bombarding ions have higher energies for the case of Ne plasmas. Films deposited with the RF-driven Ne plasma exhibit a uniform non-columnar structure, lowest oxygen impurity content, and highest mass density and mechanical properties at a cost of Ne incorporation and larger compressive residual stress.
A structural analysis of ordered Cs3Sb films grown on single crystal graphene and silicon carbide substrates
Alkali antimonides are well established as high efficiency, low intrinsic emittance photocathodes for accelerators and photon detectors. However, conventionally grown alkali antimonide films are polycrystalline with surface disorder and roughness that can limit achievable beam brightness. Ordering the crystalline structure of alkali antimonides has the potential to deliver higher brightness electron beams by reducing surface disorder and enabling the engineering of material properties at the level of atomic layers. In this report, we demonstrate the growth of ordered Cs3Sb films on single crystal substrates 3C-SiC and graphene-coated 4H-SiC using pulsed laser deposition and conventional thermal evaporation growth techniques. The crystalline structures of the Cs3Sb films were examined using reflection high energy electron diffraction and x-ray diffraction diagnostics, while film thickness and roughness estimates were made using x-ray reflectivity. With these tools, we observed ordered domains in less than 10 nm thick films with quantum efficiencies greater than 1% at 530 nm. Moreover, we identify structural features such as Laue oscillations indicative of highly ordered films. We found that Cs3Sb films grew with flat, fiber-textured surfaces on 3C-SiC and with multiple ordered domains and sub-nanometer surface roughness on graphene-coated 4H-SiC under our growth conditions. We identify the crystallographic orientations of Cs3Sb grown on graphene-coated 4H-SiC substrates and discuss the significance of examining the crystal structure of these films for growing epitaxial heterostructures in future experiments.
Effects of hydrogen on sputter-deposited boron carbide films
Sputter deposition of B 4 C films requires precise control over the microstructure and the nucleation and growth of nodular defects. Here, we study the properties of B 4 C films deposited with substrate holder temperatures of 250, 450, or 510 °C and different substrate tilt angles by direct-current magnetron sputtering in either pure Ar or a mixture of 4% H 2 in Ar as the working gas. Results show that the addition of H 2 reduces the impedance of the plasma discharge, resulting in larger discharge currents at constant power, which is attributed to a lower ionization potential of H 2 than Ar. More importantly, films deposited with the H 2 containing plasma exhibit lower oxygen impurity incorporation, a lower density of nodular defects, and suppressed columnar microstructure. These results demonstrate the effectiveness of such a plasma doping approach to improve the properties of B 4 C films.
Effects of discharge power for magnetron sputter deposition of boron carbide films on tilted substrates
Explore the source record for details and available documents.
Influence of Quantum Oscillations in the Thermal Scattering Law of Zirconium Carbide on Neutron Thermalization and Criticality
Not provided.
Mg and native defects in cubic silicon carbide from first principles
The diffusion of Mg defects in 3C-SiC is studied using the density functional theory. Mg has the highest burn-in rate as a transmutant in 3C-SiC when it is placed in high-energy neutron irradiation environment of a fusion reactor. The presence and evolution of transmutant defects impact thermal and mechanical properties of this important structural material. This study is focused on understanding the structure, stability, and evolution of Mg defects and the interaction of Mg with native defects in 3C-SiC. Our calculations of diffusion coefficients for different Mg defects suggest that Mg is likely to diffuse faster in pristine 3C-SiC than in the damaged one, in agreement with earlier experimental observations.