Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Design Optimization of Composite Structures under Uncertainty

Design optimization under uncertainty is computationally expensive and is also challenging in terms of alternative formulation. The work under the grant focused on developing methods for design against uncertainty that are applicable to composite structural design with emphasis on response surface techniques. Applications included design of stiffened composite plates for improved damage tolerance, the use of response surfaces for fitting weights obtained by structural optimization, and simultaneous design of structure and inspection periods for fail-safe structures.

Haftka, Raphael T.↗

Fabrication of carbon film composites for high-strength structures

Physical and mechanical properties of fiber composite materials consisting of carbon films are described. Application of carbon film structural composites for constructing microwave filters or optical instruments is proposed. Applications in aerospace and architectural structures for high strength and low density properties are discussed.

Preiswerk, P. R.↗

Self-Assembled Magnetic Nanoparticle Layers: Structural Control for Reconfigurable Magnetism and Functional Applications

We advance soft X-ray vector ptychographic tomography to map the 3D magnetization field in self-assembled superparamagnetic nanoparticles at a liquid–liquid interface, revealing how layered structures influence magnetic ordering. We observe that monolayers with low coordination numbers exhibit weak magnetic order, with magnetic vortices disrupting spin alignment. In contrast, bilayers and trilayers with higher coordination numbers display long-range magnetic order with strong spin correlations across larger distances and a suppression of magnetic vortices. We further quantify the average distance for vortex–antivortex pairs as 26.0 ± 2.0 nm, while vortex–vortex and antivortex–antivortex pairs exhibit larger separations, averaging 44.9 ± 5.2 and 54.1 ± 7.4 nm, respectively. These experimental results are supported by micromagnetic Monte Carlo simulations. Our findings illustrate how layered structures enhance magnetic order and spin correlation in superparamagnetic nanoparticle assemblies, providing a promising approach for tuning magnetic properties in applications such as data storage, microrobotics, and biomedicine.

Lu, Xingyuan↗

Applications of pulsed EPR spectroscopy to structural studies of sulfite oxidizing enzymes

Sulfite oxidizing enzymes (SOEs), including sulfite oxidase (SO) and bacterial sulfite dehydrogenase (SDH), catalyze the oxidation of sulfite (SO32-) to sulfate (SO42-). The active sites of SO and SDH are nearly identical, each having a 5-coordinate, pseudo-square-pyramidal Mo with an axial oxo ligand and three equatorial sulfur donor atoms. One sulfur is from a conserved Cys residue and two are from a pyranopterindithiolene (molybdopterin, MPT) cofactor. The identity of the remaining equatorial ligand, which is solvent-exposed, varies during the catalytic cycle. Numerous in vitro studies, particularly those involving electron paramagnetic resonance (EPR) spectroscopy of the Mo(V) states of SOEs, have shown that the identity and orientation of this exchangeable equatorial ligand depends on the buffer pH, the presence and concentration of certain anions in the buffer, as well as specific point mutations in the protein. Until very recently, however, EPR has not been a practical technique for directly probing specific structures in which the solvent-exposed, exchangeable ligand is an O, OH-, H2O, SO32-, or SO42- group, because the primary O and S isotopes (16O and 32S) are magnetically silent (I = 0). This review focuses on the recent advances in the use of isotopic labeling, variable-frequency high resolution pulsed EPR spectroscopy, synthetic model compounds, and DFT calculations to elucidate the roles of various anions, point mutations, and steric factors in the formation, stabilization, and transformation of SOE active site structures.

59 BASIC BIOLOGICAL SCIENCES↗

Hybrid structure of polyaniline/ZnO nanograss and its application in dye-sensitized solar cell with performance improvement

Polyaniline (PANI) hybridized ZnO photoanode for dye-sensitized solar cell (DSSC) was primarily prepared via a two-step process which involved hydrothermal growth of ZnO nanograss on the fluorine-doped tin oxide (FTO) substrate and subsequently chemisorption of PANI on the surfaces of the ZnO nanorods. The PANI hybridized ZnO nanograss films were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR), and the results indicated that there were chemical interactions between PANI and ZnO. Both pure ZnO nanograss and PANI hybridized ZnO nanograss were applied to DSSC. The results of photoelectrochemical measurement showed that the photocurrent density of PANI (100 mg/L) hybridized ZnO nanograss photoanode was significantly enhanced, and the overall light-conversion efficiency increased by 60%. The electrochemical impedance spectra (EIS) displayed that the electron densities in photoanodes of PANI hybridized ZnO nanograss were larger than that in pure ZnO nanograss. This is ascribed to more effective charge separation and faster interfacial charge transferring occurred in the hybrid photoanode. - Graphical abstract: Operational principle of the DSSC: the introduced hybridizing PANI layer performs effective charge separation and faster interfacial charge transferring. Highlights: Black-Right-Pointing-Pointer PANI/ZnO nanograss hybrid materials as photoanode in Dye-sensitized solar cell. Black-Right-Pointing-Pointer Photoelectric conversion efficiency after hybridization was enhanced by 60%. Black-Right-Pointing-Pointer PANI hybridizing ZnO nanograss induced a rapid charge separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalysis by Metal Organic Frameworks: Perspective and Suggestions for Future Research

Metal organic frameworks (MOFs) have drawn wide attention as potential catalysts, offering high densities of catalytic sites in high-area porous solids, some with stabilities at high temperatures. The field is at an early stage, characterized by numerous discoveries and novel demonstrations of catalytic properties associated with the crystalline structures of MOFs, but applications of MOFs as catalysts are still lacking. In this perspective we summarize advantages and limitations of MOFs as catalysts and fundamental issues to be addressed about their potential applications. MOF framework compositions and pore structures can strongly influence catalytic performance, allowing, for example, shape-selective and bifunctional catalysis, but research is needed to quantify reaction/transport processes in MOFs, identify catalytic sites, and determine intrinsic catalytic reaction rates. Progress is hindered by the lack of understanding of the heterogeneity of MOFs, with catalytic sites sometimes being in structures such as defects not determined by X-ray diffraction crystallography. Determination of the dynamics of MOFs and their catalytic sites, as well as the intrinsic kinetics of catalytic reactions, will help to advance guidelines for synthesizing optimum catalysts. Further, MOFs present challenges related to stability and regeneration as catalysts, some associated with the unique nature of MOFs, such as the node–linker bonds, which can break during catalysis. There are opportunities to understand these matters in depth and to find conditions of catalytic operation that minimize the processes leading to deactivation.

catalysis (heterogeneous), materials and chemistry↗

Application of InGaAs/GaAs superlattice-base structure for InGaP/GaAs superlattice-emitter bipolar transistor

The performance of an InGaP/GaAs superlattice-emitter bipolar transistor with InGaAs/GaAs superlattice-base structure is demonstrated by experimental results. The injecting electrons from superlattice emitter are easy to transport into the superlattice-base region for promoting the collector current by tunneling behavior. Furthermore, the average energy gap of base regime is substantially reduced by the use of InGaAs/GaAs superlattice structure for the requirement of low turn-on voltage. Experimentally, the transistor exhibits a maximum common-emitter current gain of 295 and a relatively low collector-emitter offset voltage of only 16 mV. In particular, the ideality factor of collector current near to unity is obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular beam epitaxial growth of metamorphic AlInSb/GaInSb high-electron-mobility-transistor structures on GaAs substrates for low power and high frequency applications

We report on molecular beam epitaxial growth of AlInSb/GaInSb metamorphic high-electron-mobility-transistor structures for low power, high frequency applications on 4 in. GaAs substrates. The structures consist of a Ga{sub 0.4}In{sub 0.6}Sb channel embedded in Al{sub 0.4}In{sub 0.6}Sb barrier layers which are grown on top of an insulating metamorphic buffer, which is based on the linear exchange of Ga versus In and a subsequent exchange of As versus Sb. Precise control of group V fluxes and substrate temperature in the Al{sub 0.4}In{sub 0.6}As{sub 1-x}Sb{sub x} buffer is essential to achieve high quality device structures. Good morphological properties were achieved demonstrated by the appearance of crosshatching and root mean square roughness values of 2.0 nm. Buffer isolation is found to be >100 k{Omega}/{open_square} for optimized growth conditions. Hall measurements at room temperature reveal electron densities of 2.8x10{sup 12} cm{sup -2} in the channel at mobility values of 21.000 cm{sup 2}/V s for single-sided Te volume doping and 5.4x10{sup 12} cm{sup -2} and 17.000 cm{sup 2}/V s for double-sided Te {delta}-doping, respectively.

36 MATERIALS SCIENCE↗

Application of Rietveld Method to the Structural Characteristics of some Bulk and Nanocrystalline Materials

In recent years, the full pattern structure refinement using Rietveld Method, with the advent of increased performance of powder diffractometers has allowed enormous progress in the analysis of powder diffraction data. In the full pattern structure refinement, with the possibility of varying peak shape parameters and site occupancies along with the structural and instrumental parameters, provides information not only on the crystal and magnetic structure, but also gives precise knowledge of the particle size and micro-structural strain. In this report Rietveld profile refinement of some bulk and nano crystalline materials has been presented.

36 MATERIALS SCIENCE↗

Experimental validation of a newly designed 6 degrees of freedom scanning laser head: Application to three-dimensional beam structure

A new scanning laser head is designed to use single Laser Doppler Vibrometer (LDV) for performing measurements up to 6 degrees of freedom (DOF) at a target. The scanning head is supported by a rotating hollow shaft, which allows the laser beam to travel up to the scanning head from an opposite direction where an LDV is set up. The scanning head is made of a set of two mirrors, which deflects the laser beam with an angle so that the rotation of the scanning head produces a conical scan. When measurements are performed at the focal point of the conical scan then three translational vibration components can be measured, otherwise the very small circle scan, before and after the focal point, can measure up to 6 degrees of freedom, including three translations and three rotations. This paper presents the 6DOF scanning head and the measurements of 3D operational deflection shapes of a test structure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetocaloric effect and magnetostructural coupling in Mn{sub 0.92}Fe{sub 0.08}CoGe compound

The structural properties of Mn{sub 0.92}Fe{sub 0.08}CoGe have been investigated in detail using synchrotron x-ray diffraction in zero and applied pressure (p = 0–10 GPa). A ferromagnetic transition occurs around T{sub C} = 300 K and a large magnetic-entropy change −ΔS{sub M} = 17.3 J/kg K detected at T{sub C} for a field change of ΔB = 5 T. The field dependence of −ΔS{sub M}{sup max} can be expressed as −ΔS{sub M}{sup max} ∝ B. At ambient temperature and pressure, Mn{sub 0.92}Fe{sub 0.08}CoGe exhibits a co-existence of the orthorhombic TiNiSi-type structure (space group Pnma) and hexagonal Ni{sub 2}In-type structure (space group P63/mmc). Application of external pressure drives a structure change from the orthorhombic TiNiSi-type structure to the hexagonal Ni{sub 2}In-type structure. A large anomaly in heat capacity around T{sub C} is detected and the Debye temperature θ{sub D} (=319(±10) K) has been derived from analyses of the low temperature heat capacity, T ≲ 10 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field study of group effects on the pullout capacity of “deep” helical piles in sand

This paper presents the results of a field load test program used to investigate group effects on the pullout capacity of single-helix “deep” helical piles/anchors in sand. The high tensile capacity and silent installation of helical piles has given them serious consideration as an alternative to conventional deep foundations and anchors for offshore renewable energy structures. New offshore applications may consider the use of groups of helical piles to resist structural loads. Group interaction effects are known to occur in helical piles, but there is a scarcity of field data on groups in sands under tensile loading. This study involved the installation and load testing of single-helix 152mm diameter round shaft piles and pile groups embedded in sand to depths of 12 and 18 helix diameters below the ground surface. The study was designed to explore the effects of close pile spacing, group configuration (i.e., number of piles), and soil strength (i.e., friction angle) as interpreted from cone penetration test (CPT) resistance. The results showed group efficiencies ranging from about 0.6 to 1.0 at a horizontal spacing of 2 to 3 times the helix diameter in sands with friction angles of about 39° to 44°. The data from this study may also be useful for validation of numerical models for analysis of helical pile group interactions.

Engineering↗

Application of Nonlinear Seismic Soil-Structure Interaction Analysis for Identification of Seismic Margins at Nuclear Power Plants

Seismic probabilistic risk assessment (SPRA) methods and approaches at nuclear power plants (NPP) were first developed in the 1970s and aspects of them have matured over time as they were applied and incrementally improved. SPRA provides information on risk and risk insights and allows for some accounting for uncertainty and variability. As a result, SPRA is now used as an important basis for risk-informed decision making for both new and operating NPPs in the US and in an increasing number of countries globally. SPRAs are intended to provide best estimates of the various combinations of structural and equipment failures that can lead to a seismic induced core damage event. However, in some instances the current SPRA approach contains large uncertainties, and potentially masks other important events (for instance, it was not the seismic motions that caused the Fukushima core melt events, but the tsunami ingress into the facility). INL has an advanced SPRA research and development (R&D) activity that will identify areas in the calculation process that contain significant uncertainties. One current area of focus is the use of nonlinear soil-structure interaction (NLSSI) analysis methods to accurately capture: 1) nonlinear soil behavior and 2) gapping and sliding between the NPP and soil. The goal of this study is to compare numerical NLSSI analysis results with recorded earthquake ground motions at Fukushima Daichii (Great Tohuku Earthquake) and evaluate the sources of nonlinearity contributing to the observed reduction in peak acceleration. Comparisons are made using recorded data in the free-field (soil column with no structural influence) and recorded data on the NPP basemat (in-structure response). Results presented in this study should identify areas of focus for future R&D activities with the goal of minimizing uncertainty in SPRA calculations. This is not a validation activity since there are too many sources of uncertainty that a numerical analysis would need to consider (variability in soil material properties, structural material properties, etc.). Rather the report will determine if the NLSSI calculations are following similar trends observed in the recorded data (i.e. reductions in maximum acceleration between the free-field and basemat) Numerical NLSSI results presented show maximum accelerations between the free field and basemat were reduced the EW and NS directions. The maximum acceleration in the UD direction increased slightly. The largest reduction in maximum accelerations between the modeled free-field and the NPP basemat resulted in nearly 50% reduction. The observation in reduction of numerical maximum accelerations in the EW and NS directions follows the observed trend in the recorded data. The maximum reductions observed in these NLSSI studies were due to soil nonlinearities, not gapping and sliding (although additional R&D is needed to develop an appropriate approach to model gapping and sliding). This exploratory study highlights the need for additional R&D on developing: (i) improved modeling of soil nonlinearities (soil constitutive models that appropriately capture cyclic soil behavior), (ii) improved modeling of gapping and sliding at the soil-structure interface (to appropriately capture the dissipation of energy at this interface), and (iii) experimental laboratory test data to calibrate the items (i) and (ii).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Shape Optimization for Control and Isolation of Structural Vibrations in Aerospace and Defense Applications

Among the main challenges in shape optimization is the coupling of Finite Element Method (FEM) codes in a way that facilitates efficient computation of shape derivatives. This is particularly difficult with multi-physics problems involving legacy codes, where the costs of implementing and maintaining shape derivative capabilities are prohibitive. There are two mathematically equivalent approaches to computing the shape derivative: the volume method, and the boundary method. Each has a major drawback: the boundary method is less accurate, while the volume method is more invasive to the FEM code. Prior implementations of shape derivatives at Sandia have been based on the volume method. We introduce the strip method, which computes shape derivatives on a strip adjacent to the boundary. The strip method makes code coupling simple. Like the boundary method, it queries the state and adjoint solutions at quadrature nodes, but requires no knowledge of the FEM code implementations. At the same time, it exhibits the higher accuracy of the volume method. The development of the strip method also offers us the opportunity to share some lessons learned about implementing the volume method and boundary method, to show shape optimization results on problems of interest, and to begin addressing the other main challenges at hand: constraints on optimized shapes, and their interplay with optimization algorithms.

97 MATHEMATICS AND COMPUTING↗