Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

The effect of temperature and microstructure on dynamic deformation of iron, tantalum, and titanium

Laser-driven shock loading was performed on thin samples of iron, tantalum, and titanium at strain-rates up to 10 7 s –1 , and over a range of temperatures extending from 120 through 800 K, to investigate the influence of temperature on the early stages of yielding and plastic flow in materials of distinct crystal structure and initial defect density. The onset of yielding was identified using time-resolved velocimetry of the target rear surface to reveal the peak elastic state in the precursor wave front. Measurements on as-received iron reveal a trend of decreasing peak elastic stress (σE) with increasing temperature and electron microscopy of the recovered material revealed evidence of mobile dislocations coalescing into subgrains. This is in contrast to the results for the annealed iron where theσEremains constant with increasing temperature and recovered samples showed indications of deformation twinning. For tantalum, the yield strength remains constant for the most part, but has a jump in yield strength at 815 K, indicative of a possible twinning to slip transition with increasing temperature. For titanium, the yield strength was generally constant with temperature. Here, these results provide insight into studying deformation mechanisms, such as slip and twinning, in high rate loading of materials.

36 MATERIALS SCIENCE↗

A multiscale coupling method for the modeling of dynamics of solids with application to brittle cracks

We present a multiscale model for numerical simulations of dynamics of crystalline solids. The method combines the continuum nonlinear elasto-dynamics model, which models the stress waves and physical loading conditions, and molecular dynamics model, which provides the nonlinear constitutive relation and resolves the atomic structures near local defects. The coupling of the two models is achieved based on a general framework for multiscale modeling - the heterogeneous multiscale method (HMM). We derive an explicit coupling condition at the atomistic/continuum interface. Application to the dynamics of brittle cracks under various loading conditions is presented as test examples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revealing the Latent Atomic World Through Data-Driven Microscopy

Many emerging technologies depend on the precise design of materials structure, chemistry, and defects. As devices shrink, manufacturing tolerances tighten, and performance envelopes improve, we must increasingly measure and manipulate materials at or near the single atom level. Here we describe how transmission electron microscopy (TEM) underpins our ability to see and direct the latent atomic world. We review a selection of our recent high-resolution TEM studies of the synthesis of oxide-based nanomaterials and their evolution in extreme environments. We then discuss powerful new artificial intelligence (AI) and machine learning (ML) approaches we have developed for rich, reproducible, and scalable experimentation. Furthermore, we conclude by discussing future developments that will enable new materials for breakthrough technologies.

97 MATHEMATICS AND COMPUTING↗

RF cured nanocomposite adhesives for multi-material joining applications

A method for fabricating, and curing, nanocomposite adhesives including introducing nanoheater elements into a heat-curing adhesive to fabricate a nanocomposite adhesive, and providing a radio-frequency (RF) electromagnetic wave to the nanocomposite adhesive to heat, and cure the nanocomposite adhesive. The nanocomposite adhesive is physically applied to first and second materials to bond the first and second materials upon curing of the nanocomposite adhesive, and the RF electromagnetic wave has a frequency in the radio-frequency range, having energy that is transferred to the nanoheater elements by electromagnetic wave interactions with permanent and induced dipoles, intrinsic photon-phonon interaction, or interactions with nanoheater defects and grain structures.

Zhang, Yuepeng↗

Mechanics of Individual, Isolated Vortices in a Cuprate Superconductor

Superconductors often contain quantized microscopic whirlpools of electrons, called vortices, that can be modeled as one-dimensional elastic objects. Vortices are a diverse playground for condensed matter because of the interplay between thermal fluctuations, vortex-vortex interactions, and the interaction of the vortex core with the three-dimensional disorder landscape. While vortex matter has been studied extensively, the static and dynamic properties of an individual vortex have not. Here we employ magnetic force microscopy (MFM) to image and manipulate individual vortices in detwinned, single crystal YBa{sub 2}Cu{sub 3}O{sub 6.991} (YBCO), directly measuring the interaction of a moving vortex with the local disorder potential. We find an unexpected and dramatic enhancement of the response of a vortex to pulling when we wiggle it transversely. In addition, we find enhanced vortex pinning anisotropy that suggests clustering of oxygen vacancies in our sample and demonstrates the power of MFM to probe vortex structure and microscopic defects that cause pinning.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon enhancement mode nanostructures for quantum computing.

Development of silicon, enhancement mode nanostructures for solid-state quantum computing will be described. A primary motivation of this research is the recent unprecedented manipulation of single electron spins in GaAs quantum dots, which has been used to demonstrate a quantum bit. Long spin decoherence times are predicted possible in silicon qubits. This talk will focus on silicon enhancement mode quantum dot structures that emulate the GaAs lateral quantum dot qubit but use an enhancement mode field effect transistor (FET) structure. One critical concern for silicon quantum dots that use oxides as insulators in the FET structure is that defects in the metal oxide semiconductor (MOS) stack can produce both detrimental electrostatic and paramagnetic effects on the qubit. Understanding the implications of defects in the Si MOS system is also relevant for other qubit architectures that have nearby dielectric passivated surfaces. Stable, lithographically defined, single-period Coulomb-blockade and single-electron charge sensing in a quantum dot nanostructure using a MOS stack will be presented. A combination of characterization of defects, modeling and consideration of modified approaches that incorporate SiGe or donors provides guidance about the enhancement mode MOS approach for future qubits and quantum circuit micro-architecture.

36 MATERIALS SCIENCE↗

Computational investigations of Dienes defect- and vacancy-induced changes in the electronic and vibrational properties of carbon fiber structural units

Carbon fiber (CF) is a promising lightweight alternative to steel and is of significant interest for energy applications. As CF continues to find new uses and is exposed to new external conditions, a noninvasive method of monitoring its structural integrity is critical. Raman spectroscopy is a commonly used method for this monitoring; however, it is highly inferential, and the interpretation of the data is not always straightforward. In this work, we perform density functional theory (DFT) calculations to investigate changes in the vibrational properties of CF structural units (i.e., graphene and graphite) caused by monovacancy and Dienes defects as a foundation for modeling more complex defects that move our model toward that of realistic CF. Using large computational supercells, we can understand how these defects change the electronic structure and vibrational properties of graphene and graphite for interdefect distances near those of the lower experimental limit. The monovacancy opens an electronic bandgap at the K point. Although no such electronic gap is opened by the Dienes defect, both defects introduce flat defect bands near the Fermi energy. The Dienes defect creates long-range deviations of the phonons, leading to substantial broadening of the highest frequency optical modes in the band structure compared to that of the pristine material. In contrast, the phonon changes caused by the monovacancy are short range, and only minor changes in the band structure or phonon density of states were observed. These findings can assist in the interpretation of experimental results by providing atomic-scale insight into key electronic and vibrational features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray study of the modulated structure in as-grown Ga{sub 2}Te{sub 3} crystals with the defect zinc-blende lattice

Ga{sub 2}Te{sub 3} crystallizes in the zinc-blende structure, where one third of the cation sites are vacant. Single crystal X-ray diffraction studies were done on as-grown Ga{sub 2}Te{sub 3} crystals. The diffraction measurements show, other than the zinc-blende type main reflections, satellite reflections at q{approx}1/20(210){sub c}, where the subscript c means the cubic sub-lattice. The analysis of the satellite reflections shows that the crystal contains a two-dimensional modulation with q{sub 1}{approx}1/20(210){sub c} and q{sub 1}{sup '}{approx}1/20(21-bar0){sub c}. The modulated structure is composed of a coupled mode of the amplitude type modulation caused by Ga vacancies and the accompanying displacive modulation of surrounding Te atoms, which has the polarization vector along the [001]{sub c} direction. The nature of the atomic modulations is argued and the origin of the modulation is ascribed to the local distortion around a Ga vacancy. - Graphical Abstract: Ga{sub 2}Te{sub 3} crystallizes into the zinc-blende structure, where one third of the cation sites are vacant. Single crystal X-ray diffraction studies showed that as-grown Ga{sub 2}Te{sub 3} crystals display main reflections which correspond to the cubic zinc-blende lattice and satellite reflections at q=(0.089 0.050 0.00){sub c}. These satellite reflections show that Ga{sub 2}Te{sub 3} crystals contain transverse type displacement modulation, whose traveling direction is almost <210>{sub c}, while the polarization vector is nearly <001>{sub c}

36 MATERIALS SCIENCE↗

Nanoscale Disorder and Local Electronic Properties of CaCu,Ti,012: An Integrated Study of Electron, Neutron and X-ray Diffraction, X-ray Absorption Fine Structure and First Principles Calculations

We report a combined experimental and theoretical study of CaCu{sub 3}Ti{sub 4}O{sub 12}. Based on our experimental observations of nanoscale regions of Ca-Cu antisite defects in part of the structure, we carried out density-functional theory (DFT) calculations that suggest a possible electronic mechanism to explain the gigantic dielectric response in this material. The defects are evident in atomically resolved transmission electron microscopy measurements, with supporting evidence from a quantitative analysis of the electron diffraction and DFT which suggests that such defects are reasonable on energetic grounds. To establish the extent of the defects, bulk average measurements of the local structure were carried out: extended x-ray absorption fine structure (EXAFS), atomic pair-distribution function analysis of neutron powder-diffraction data, and single-crystal x-ray crystallography. The EXAFS data are consistent with the presence of the nanoclustered defects with an estimate of less than 10% of the sample being disordered while the neutron powder-diffraction experiments place an upper of -5% on the proportion of the sample in the defective state. Because of the difficulty of quantifying nanoscale defects at such low levels, further work will be required to establish that this mechanism is operative in CaCu{sub 3}Ti{sub 4}O{sub 12} but it presents a nontraditional plausible avenue for understanding colossal dielectric behavior.

36 MATERIALS SCIENCE↗

Highly-defective nanocrystals of ZnS formed via dissimilatory bacterial sulfate reduction: A comparative study with their abiogenic analogues

The physicochemical properties of a (nano)mineral are strongly affected by its formation processes, and thus, may indicate the (nano)mineral’s formation environment and mechanism. This correlation, although relevant to a myriad of geological, environmental, and material-science processes, has not yet been fully appreciated and systematically explored. In this study, using the Zn–S system, we demonstrate that biological and abiotic processes at similar experimental conditions can produce distinctive particle size, morphology, and crystal structure in the formed ZnS. Specifically, bacterial sulfate reduction led to the formation of highly-defective nanocrystals of mixed sphalerite and wurtzite in a range of ~4–12 nm. By comparison, the abiotic procedures of titration- or diffusion-controlled precipitation resulted in the formation of polycrystalline aggregates that contained randomly-oriented, ultrafine crystals below ~2–3 nm. The poor crystallinity in the abiogenic samples, regardless of the sulfide addition rates, reveals an overall nucleation-dominated, crystal growth-restricted pathway for the formation of ZnS from low-temperature aqueous solutions. The difficulty in the ZnS crystallization likely stems from the intrinsic surface instability of the ZnS growth units (i.e., in the form of nanoclusters) resulting from the dipole–dipole interactions of the unit with surrounding water molecules. In the biogenic samples, the ZnS crystallinity was significantly improved, indicating that the presence of bacterial metabolites somehow promoted the crystallization process. With evidence for the enlarged {1 1 1} planes in the biogenic nanocrystals, we attribute this enhancement mainly to the selective interaction of the bacterial metabolites with polar faces of the ZnS growth units, which might have effectively screened the dipole moments in the growth units and enabled their crystallographic assembly. By revealing the intrinsic difficulty and specific pathways for the ZnS crystallization, we also present viable explanations for the exclusive occurrence of structural defects in {1 1 1} planes of the biogenic nanocrystals. The findings of our study provide insight into the origin and fate of metal sulfide nanoparticles in the environment, and have implications for biomineralization, bioremediation of metal-contaminated sites, and bacterial production of functional nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural basis of HIV inhibition by translocation-defective RT inhibitor 4'-ethynyl-2-fluoro-2'-deoxyadenosine (EFdA)

4'-Ethynyl-2-fluoro-2'-deoxyadenosine (EFdA) is the most potent nucleoside analog inhibitor of HIV reverse transcriptase (RT). It retains a 3'-OH yet acts as a chain-terminating agent by diminishing translocation from the pretranslocation nucleotide-binding site (N site) to the posttranslocation primer-binding site (P site). Also, facile misincorporation of EFdA-monophosphate (MP) results in difficult-to-extend mismatched primers. To understand the high potency and unusual inhibition mechanism of EFdA, we solved RT crystal structures (resolutions from 2.4 to 2.9 Å) that include inhibition intermediates ( i ) before inhibitor incorporation (catalytic complex, RT/DNA/EFdA-triphosphate), ( ii ) after incorporation of EFdA-MP followed by dT-MP (RT/DNA EFdA-MP P • dT-MP N ), or ( iii ) after incorporation of two EFdA-MPs (RT/DNA EFdA-MP P • EFdA-MP N ); ( iv ) the latter was also solved with EFdA-MP mismatched at the N site (RT/DNA EFdA-MP P • EFdA-MP *N ). We report that the inhibition mechanism and potency of EFdA stem from interactions of its 4'-ethynyl at a previously unexploited conserved hydrophobic pocket in the polymerase active site. Furthermore, the high resolution of the catalytic complex structure revealed a network of ordered water molecules at the polymerase active site that stabilize enzyme interactions with nucleotide and DNA substrates. Finally, decreased translocation results from favorable interactions of primer-terminating EFdA-MP at the pretranslocation site and unfavorable posttranslocation interactions that lead to observed localized primer distortions.

59 BASIC BIOLOGICAL SCIENCES↗

Defect evolution in Ni and NiCoCr by in situ 2.8 MeV Au irradiation

The evolution of radiation-induced defects in Ni and the single-phase concentrated solid solution alloy, NiCoCr, were investigated during in situ 2.8 MeV Au ion irradiation and post-irradiation analysis using transmission electron microscopy. Compared to Ni, both the size and area density of defect clusters decreased in NiCoCr under the same irradiation conditions, suggesting that the chemical complexity, i.e., randomness of lattice site occupations, of NiCoCr suppressed radiation-induced damage. One-dimensional glide of defect clusters was observed in Ni but not in the NiCoCr alloy. The structural nature of small defect clusters in NiCoCr were further investigated using high-angle annular dark field scanning transmission electron microscopy.

36 MATERIALS SCIENCE↗

Trigonal Bipyramidal V 3+ Complex as an Optically Addressable Molecular Qubit Candidate

Synthetic chemistry enables a bottom-up approach to quantum information science, where atoms can be deterministically positioned in a quantum bit or qubit. Two key requirements to realize quantum technologies are qubit initialization and read-out. By imbuing molecular spins with optical initialization and readout mechanisms, analogous to solid-state defects, molecules could be integrated into existing quantum infrastructure. To mimic the electronic structure of optically addressable defect sites, we designed the spin-triplet, V 3+ complex, (C 6 F 5 ) 3 trenVCN t Bu (1).We measured the static spin properties as well as the spin coherence time of1demonstrating coherent control of this spin qubit with a 240 GHz electron paramagnetic resonance spectrometer powered by a free electron laser. We found that1exhibited narrow, near-infrared photoluminescence (PL) from a spin-singlet excited state. Using variable magnetic field PL spectroscopy, we resolved emission into each of the ground-state spin sublevels, a crucial component for spin-selective optical initialization and readout. This work demonstrates that trigonally symmetric, heteroleptic V 3+ complexes are candidates for optical spin addressability.

30 DIRECT ENERGY CONVERSION↗

Contorted acene ribbons for stable and ultrasensitive neural probes

Organic materials that conduct both electrons and ions are integral to implantable bioelectronics because of their conformable nature. There is a dearth of these materials that are highly sensitive to cations, which are the majority ions on the surface of neurons. This manuscript offers a solution using an extended ribbon structure that is defect-free, providing high electronic mobility along its fused backbone, while the edge structure of these ribbons promotes high ionic conductivity. We incorporated these mixed ion/electron conductors into neural probes and implanted them in a rodent brain where they offer a suite of useful properties: high cation sensitivity, stability over several weeks after implantation, and biocompatibility. These materials represent an innovative class of implantable biosensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Details in Semiconductors Gordon Conference, New London, NH, August 3-8, 2008

Continuing its tradition of excellence, this Gordon Conference will focus on research at the forefront of the field of defects in homogeneous and structured semiconductors. The conference will have a strong emphasis on the control of defects during growth and processing, with an increases emphasis on nanostructures as compared to previous conferences. Electronic, magnetic, and optical properties of bulk, thin film, and nanoscale semiconductors will be discussed in detail. In contrast to many conferences, which tend to focus on specific semiconductors, this conference deals with defects in a broad range of bulk and nanoscale electronic materials. This approach has proved to be extremely fruitful for advancing fundamental understanding in emerging materials such as wide-band-gap semiconductors, doped nanoparticles, and organic semiconductors. Presentations of state-of-the-art theoretical methods will contribute to a fundamental understanding of atomic-scale phenomena. The program consists of about twenty invited talks, with plenty of discussion time, and a number of contributed poster sessions. Because of the large amount of discussion time, the conference provides an ideal forum for dealing with topics that are new and/or controversial.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CsSnI[subscript 3]: Semiconductor or Metal? High Electrical Conductivity and Strong Near-Infrared Photoluminescence from a Single Material. High Hole Mobility and Phase-Transitions

CsSnI{sub 3} is an unusual perovskite that undergoes complex displacive and reconstructive phase transitions and exhibits near-infrared emission at room temperature. Experimental and theoretical studies of CsSnI{sub 3} have been limited by the lack of detailed crystal structure characterization and chemical instability. Here we describe the synthesis of pure polymorphic crystals, the preparation of large crack-/bubble-free ingots, the refined single-crystal structures, and temperature-dependent charge transport and optical properties of CsSnI{sub 3}, coupled with ab initio first-principles density functional theory (DFT) calculations. In situ temperature-dependent single-crystal and synchrotron powder X-ray diffraction studies reveal the origin of polymorphous phase transitions of CsSnI{sub 3}. The black orthorhombic form of CsSnI{sub 3} demonstrates one of the largest volumetric thermal expansion coefficients for inorganic solids. Electrical conductivity, Hall effect, and thermopower measurements on it show p-type metallic behavior with low carrier density, despite the optical band gap of 1.3 eV. Hall effect measurements of the black orthorhombic perovskite phase of CsSnI{sub 3} indicate that it is a p-type direct band gap semiconductor with carrier concentration at room temperature of {approx} 10{sup 17} cm{sup -3} and a hole mobility of {approx} 585 cm{sup 2} V{sup -1} s{sup -1}. The hole mobility is one of the highest observed among p-type semiconductors with comparable band gaps. Its powders exhibit a strong room-temperature near-IR emission spectrum at 950 nm. Remarkably, the values of the electrical conductivity and photoluminescence intensity increase with heat treatment. The DFT calculations show that the screened-exchange local density approximation-derived band gap agrees well with the experimentally measured band gap. Calculations of the formation energy of defects strongly suggest that the electrical and light emission properties possibly result from Sn defects in the crystal structure, which arise intrinsically. Thus, although stoichiometric CsSnI{sub 3} is a semiconductor, the material is prone to intrinsic defects associated with Sn vacancies. This creates highly mobile holes which cause the materials to appear metallic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗