Search NASA⌕ Search

SEARCH · Search NASA

Results for “High spatial resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Evidence for an infrared disk in the core of the extraordinary planetary nebula Abell 30

High spatial resolution infrared maps of the core of the evolved planetary nebula Abell 30, which has been shown to be composed of heavily processed material, are presented. These maps reveal an elongated, disklike structure that is not evident on optical pictures. Multicolor photometry at several positions in this disk shows that this emission is due to dust, some of which is near the evaporation temperature of graphite. Lyman-alpha trapping is shown to be inadequate as a heating source for these grains, but direct absorption of stellar photons is sufficient. In view of the unusual chemical composition, A30 represents a late stage in the evolution of a planetary nebula progenitor. The observed infrared structure may provide clues to the ejection mechanism at this stage of development.

Lester, D. F.↗

Meridional energy balance of Jupiter

The meridional energy balance of Jupiter is calculated from high spatial resolution observations by the Voyager 1 infrared spectrometer and radiometer. On a hemispheric scale Jupiter radiates thermal energy to space approximately uniform with latitude while solar energy absorption varies approximately as the solar angle. This implies internal adjustment to the solar energy with a larger contribution poleward of + or - 45 deg than in the equatorial zone. The internal flux is modulated by the major visible features of the zone and belt system but, unlike the hemispheric scale where increased internal flux is correlated with decreased solar absorption, on smaller scales the inverse occurs. The energy balance is very likely to be controlled by dynamics, but the relative influence of the upper atmosphere and the interior is not yet clear.

Pirraglia, J. A.↗

Investigation of the three-dimensional flow field within a transonic fan rotor - Experiment and analysis

An experimental investigation of the three-dimensional flow field through a low aspect ratio, transonic, axial flow fan rotor has been conducted, using an advanced laser anemometer (LA) system. Laser velocimeter measurements of the rotor flow field at the design operating speed and over a range of throughflow conditions are compared to analytical solutions. The numerical technique used herein yields the solution to the full, three-dimensional, unsteady Euler equations using an explicit time-marching, finite volume approach. The numerical analysis, when coupled with a simplified boundary layer calculation, generally yields good agreement with the experimental data. The test rotor has an aspect ratio of 1.56, a design total pressure ratio of 1.629 and a tip relative Mach number of 1.38. The high spatial resolution of the LA data matrix (9 radial x 30 axial x 50 blade-to-blade) permits details of the transonic flow field such as shock location, turning distribution, and blade loading levels to be investigated and compared to analytical results.

Pierzga, M. J.↗

Lidar Studies of Temperature and Density Using Rayleigh Scattering

Lidar has proved to be a necessary complement to the different tools already available to study the atmosphere either to complete the altitude range to be studied or to measure a complementary parameter. Futhermore, the high spatial resolution provides a new insight in the behavior of the middle atmosphere. However it is obvious that the results have to be used in correlation with satellite observations in order to be placed in the global context. A major contribution to the understanding of the dynamics of such instruments, mainly if they are combined with radars, ological rockets and balloons. The spacing of such a network and the geographic situation of the sites depend on the problem to be studied.

Chanin, M. L.↗

Exploring the Solar System with Stellar Occultations

By recording the light intensity as a function of time when a planet occults a relatively bright star, the thermal structure of the upper atmosphere of the planet can be probed. The main feature of stellar occultation observations is their high spatial resolution, typically several thousand times better than the resolution achievable with ground-based imaging. Five stellar occultations have been observed. The main results of these observations are summarized. Stellar occultations have been observed on Uranus, Mars, Pallas, Neptune and the Jovian Ring.

Elliot, J. L.↗

Cumulus cloud venting of mixed layer ozone

Observations are presented which substantiate the hypothesis that significant vertical exchange of ozone and aerosols occurs between the mixed layer and the free troposphere during cumulus cloud convective activity. The experiments utilized the airborne Ultra-Violet Differential Absorption Lidar (UV-DIAL) system. This system provides simultaneous range resolved ozone concentration and aerosol backscatter profiles with high spatial resolution. Evening transects were obtained in the downwind area where the air mass had been advected. Space-height analyses for the evening flight show the cloud debris as patterns of ozone typically in excess of the ambient free tropospheric background. This ozone excess was approximately the value of the concentration difference between the mixed layer and free troposphere determined from independent vertical soundings made by another aircraft in the afternoon.

Ching, J. K. S.↗

Asteroid amphitrite: Surface composition and prospects for the possible Galileo flyby

Studies of the trajectory of the Galileo mission to Jupiter recently revealed that the spacecraft can pass close to one of the largest asteroids (#29 Amphitrite). NASA has therefore altered the mission plan of the Galileo spacecraft to include a possible close flyby of Amphitrite in early December 1986, if the condition of the spacecraft allows. If this option is actually implemented, Amphitrite will become the only asteroid for which any high-spatial resolution images and reflection spectra will be available. To evaluate the value of this data and place Amphitrite in the context of the more than 600 asteroids for which some compositional information exists. Existing data was reexamined, new telescopic spectra of Amphitrite were obtained, and simulated Galileo data sets were constructed.

Bell, J. F.↗

The new solar magnetograph for the Canary Islands Observatory THEMIS

THEMIS was designed for accurate polarization measurements in order to determine the intensity and direction of the magnetic field without interference with the local variations of the thermodynamical parameters. That goal leads to the following requirements: (1) high spatial resolution in horizontal direction; (2) sufficient resolution in height, which requires observations in several spectral lines with a sufficient spectral resolution; (3) accurate polarization measurements; (4) adequate time coverage to follow the evolution of individual structures; (5) precise tracking and scanning mechanisms; and (6) sufficient field of view for the different observed structures. The design of the instrument is discussed in detail.

Rayrole, J.↗

The 8.3 and 12.4 micron imaging of the Galactic Center source complex with the Goddard infrared array camera

A 30 x 30 arcsec field at the Galactic Center (1.5 x 1.5 parsec) was mapped at 8.3 microns and 12.41 microns with high spatial resolution and accurate relative astrometry, using the 16 x 16 Si:Bi accumulation mode charge injection device Goddard infrared array camera. The design and performance of the array camera detector electronics system and image data processing techniques are discussed. Color temperature and dust opacity distributions derived from the spatially accurate images indicate that the compact infrared sources and the large scale ridge structure are bounded by warmer, more diffuse material. None of the objects appear to be heated appreciably by internal luminosity sources. These results are consistent with the model proposing that the complex is heated externally by a strong luminosity source at the Galactic Center, which dominates the energetics of the inner few parsecs of the galaxy.

Gezari, D. Y.↗

Monolithically integrated array of GaAlAs electroabsorption modulators

The operation of an eight-element monolithic array of GaAlAs electroabsorption modulators has been demonstrated. The single-mode waveguide modulators are implemented in a reverse-biased p-pi-n heterojunction configuration, with center-to-center spacing of 9 microns between adjacent channels. This device may be useful for intensity modulation in high (spatial) resolution applications.

Robinson, D. L.↗

The Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment

The Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment is described. The SILTS experiment will obtain high-spatial-resolution measurements of the temperatures of Shuttle orbiter leeside surfaces during atmospheric entry. The data will be obtained by means of an imaging, infrared radiometer, located atop the orbiter's vertical tail, which will view the orbiter fuselage and left wing. Implementation of the SILTS experiment required a significant change to the configuration of the orbiter's vertical tail fintip. The orbiter Columbia has been modified to carry the SILTS experiment which will be active on Columbia's next flight, currently scheduled for mid-1985.

Throckmorton, D. A.↗

Recent advances in solar radio physics

High spatial resolution microwave observations of solar active regions, coronal loops and flares are reviewed. Observations of preflare active regions are presented; in particular the interpretations of reversal of polarization at the flare site and the role of newly emerging flux in triggering the onset of flares are considered. The spatial locations of microwave burst emitting regions are discussed; loops or arcades of loops appear to be the sites of flare energy release in microwave bursts. Direct observational evidence of magnetic reconnection as the primary cause of acceleration of electrons in microwave bursts is provided.

Kundu, M. R.↗

Ellipsometric surface analysis of wear tracks produced by different lubricants

A scanning ellipsometer with high spatial resolution was used to analyze wear tracks generated on M-50 surfaces operated in several lubricant formulations. These formulations included a pure ester base stock of trimethyol propane triheptanoate with additives of either benzotriazole (BTZ), dioctyldiphenylamine (DODPA), or tricresylphosphate (TCP). Results indicated that BTZ and TCP produced patchy oxide surface films consisting mainly of Fe304. DOPDA produced a much more uniform oxide film. These findings may explain the tendency of lubricant formulations containing TCP to scuff more readily than those containing only antioxidants.

Lauer, J. L.↗

Measurement of heat-transfer coefficients in shock wave-turbulent boundary layer interaction regions with a multi-layered thin film heat transfer gauge

A thin film heat transfer gauge is applied to the measurement of heat transfer coefficients in the interaction regions of incident shock waves and fully developed turbulent boundary layers. It was developed to measure heat flux with high spatial resolution and fast response for wind tunnels with long flow duration. To measure the heat transfer coefficients in the interaction region in detail, experiments were performed under the conditions of Mach number = 4, total pressure = 1.2 MPa, 0.59 to approximately 0.65. Reynolds number = 1.3 to approximately 1.5 x 10 to the 7th power and incident shock angles from 17.8 to 22.8 degrees. The results show that the heat transfer coefficient changes complicatedly in the interaction region. At the beginning the interaction region, the heat transfer coefficient decreases at first, reaches its minimum value at the point where the pressure begins to increase, and then increases sharply. When the boundary layer begins to separate, even a small separation bubble causes significant changes in the heat transfer coefficient, while the pressure does not show any changes which suggests that the boundary layer begins to separate.

Hayashi, M.↗

Infrared diagnosis using liquid crystal detectors

The possible uses of pulsed carbon dioxide lasers for analysis of plasmas and flows need appropriate infrared image converters. Emphasis was placed on liquid crystal detectors and their operational modes. Performance characterstics and selection criteria, such as high sensitivity, short reaction time, and high spatial resolution are discussed.

Hugenschmidt, M.↗

The X-ray properties of normal galaxies. What do we know and what can we learn with the next generation of X-ray telescopes?

Einstein Observatory results are used to assess the possibilities of spaceborne X-ray astronomy projects such as XMM (ESA) and AXAF (NASA). Einstein observations show that normal galaxies of all morphological types are spatially extended sources of X-ray emission with 0.5 to 3.0 keV X-ray luminosities of 10 to the 39th to 41st power erg/sec. X-ray telescopes can study the end products of stellar evolution in galaxies of different morphological types. Phenomena linked to starburst nuclear activity can best be detected and studied in X-ray. Hot coronae or a hot phase of the interstellar medium can only be studied through their X-ray emission. It is shown that high spatial resolution is essential for studying normal galaxies and identifying different emission regions. Good spectral sensitivity and spectral imaging capability are essential for gaining a deeper understanding of the phenomena at work.

Fabbiano, G.↗

Accuracy of geologic maps produced from Landsat data

Remote sensing techniques are now being applied to space-acquired data for use in preparing geologic maps, at least at the reconnaissance level, when maps produced from Landsat multispectral scanner data are compared with those made by conventional ground/aerial techniques, accuracies of the Landsat maps fall in the 40-60 percent range relative to their conventional counterparts. A study of map accuracy achieved with Landsat-4 Thematic Mapper (TM) data indicates a 10-15 percent improvement in this range. Results from TM scenes for Death Valley, California and the Waterpocket Fold, Utah are evaluated in this paper. While accuracy values should improve even more when corrections for topographic effects are made, there appears to be an upper limit to accuracy (not yet determined), owing to a fundamental difference between geologic maps (which show stratigraphic unit distribution below the regolith) and Landsat-derived rock units maps (which identify rock and regolith types at the surface). However, preliminary results from the Utah study indicate a marked improvement and accuracy to better than 80 percent when high spatial resolution TM-equivalent data from an aircraft mission are used.

Short, N. M.↗

Optical-system design for next-generation pushbroom sensors

Next-generation pushbroom sensors for earth observation require high-performance optics that provide high spatial resolution over wide fields of view. Specifically, blur diameters on the order of 10 to 15 microns are needed over 5 to 15 deg fields. In addition to this fundamental level of optical performance, other characteristics, such as spatial coregistration of spectral bands, flat focal plane, telecentricity, and workable pupil location are significant instrument design considerations. The detector-assembly design, optical line-of-sight pointing method and sensor packaging all hinge on these secondary attributes. Moreover, the need for broad spectral coverage, ranging from 0.4 to 12.5 microns, places an additional constraint on optical design. This paper presents alternative design forms that are candidates for wide-field pushbroom sensors, and discusses the instrument-design tradeoffs that are linked to the selection of these alternate optical approaches.

Mika, A. M.↗