Results for “Extraction” — Page 99

NASA NTRSDate not supplied

Method for Extracting Aerodynamic Coefficients and Winds On-the-Fly Using Real-Time GPS Data

The landing accuracy of an autonomous guided parafoil is influenced by its ability to predict the trajectory, which is shaped by the parafoil’s aerodynamic characteristics and atmospheric winds. The parafoil is subjective to imperfections from manufacturing, damage during deployment, lateral asymmetry, and so forth, leading to discrepancies between the actual aerodynamic properties and the onboard aerodynamic model. Thus, by acquiring an accurate knowledge of the aerodynamic properties and real-time winds, the onboard simulation can reduce the undertainties in the dynamics modeling for trajectory propagation to improve the landing accuracy. For that purpose, a non-linear least-squares method is developed to calculate differential corrections for optimizing and extracting the parafoil aerodynamic coefficients and winds on-the-fly using real-time data from the Global Positioning System (GPS). Post-flight analyses from two test flights have shown that the method provides improved simulations that closely match the GPS trajectories.

Lisa Ling↗

NASA NTRSDate not supplied

State-of-the-art and Systems Analysis of Emerging Technologies for Oxygen and Metals Extraction from Lunar Regolith

Laurent Sibille↗

NASA NTRSDate not supplied

Lunar Helium-3: Mining Concepts, Extraction Research, and Potential ISRU Synergies

The M-3 miner was designed to excavate 1258 tonnes/hr with a bucket wheel excavator and process 556 tonnes/hr (during the lunar daytime) of <100 μm regolith through a 12 MW solar concentrator powered heat pipe heat exchanger(HPHX). The HPHX was designed to heat the regolith up to 700°C to release the implanted solar wind volatiles and recuperate 85% of the input heat. Considering a 20 ppb 3He concentration in the regolith, 66kg of 3He would be captured in onboard storage tanks over the course of one year.This mining effort would also result in the release hundreds of tonnes of other valuable volatile by-products, including water and hydrogen, that could be used to support sustainable lunar exploration.In the more near term, a mining operation to demonstrate the ability to collect 15 tonnes water for liquid oxygen/liquid hydrogen propellant from 5% water rich regolith may require ~400 tonnes of regolith to be excavated. This type of pilot scale operation could also demonstrate the ability to extract about 6 g of 3He, assuming the 3He concentration in permanently shadowed regions on the Moon is similar to that of equatorial regions.

Aaron D.S. Olson↗

NASA NTRS2022

Environmental Testing of the OVEN System for Lunar Water Extraction and Prospecting

Introduction: The presence of water ice in permanently shadowed regions on the lunar surface [1] may enable a sustained human presence on the Moon with minimal need for consumables. However, in order to develop a long term utilization plan that includes the usage of in-situ water we must first understand the abundance, stratigraphy and distribution of this re-source. Multiple space agencies currently have plans for lunar water prospecting missions. The Optimized Volatile Extraction Node (OVEN) was designed for water prospecting missions that require samples to be weighed, sealed, and heated as the means of determining water concentration. This method of water quantification necessitates a fair amount of automation, so a rigorous environmental test program was performed in order to build confidence in the performance of the OVEN design. The work presented here describes the OVEN environmental test program as well as ongoing efforts to improve on the design. Vibration: The OVEN participated in two rounds of random vibration tests. The first test was a stand-alone test performed at the Energy Systems Test Area of the Johnson Space Center. The second test was an integrated test with the mobile platform developed for the Resource Prospector project. The OVEN survived both tests without damage, but the tests did provide valuable lessons learned with regards to specific operations. Thermal Vacuum: The OVEN was successfully demonstrated at a temperature range of -50 to 75 C in a thermal vacuum chamber. The need to heat motor gearboxes at lower temperatures was predetermined so this test program was completed by implementing a method of gearbox heating that used the existing circuitry within the motors. Dust: A custom dynamometer was built in order to determine the torque required to move the various mechanisms within the OVEN at a range of temperatures. The OVEN system was coated with lunar dust simulant in order to determine mechanism torques under a worst-case operating condition. Sublimation: Sublimation losses within the OVEN were quantified through a series of test configurations, including an integrated test in a thermal vacuum chamber at Glenn Research Center [2]. Current Work: The OVEN subsystem is currently not a component of any existing prospecting missions, but work continues that will take the lessons learned from previous environmental tests and improve on the design in order to be considered for future prospecting opportunities. References: [1] Colaprete, A., Schultz, P., Heldmann, J., Wooden, D., Shirley, M., Ennico, K., ... & Sollitt, L. (2010). Detection of water in the LCROSS ejecta plume. science, 330(6003), 463-468. [2] Kleinhenz, J., Smith, J., Roush, T., Colaprete, A., Zacny, K., Paulsen, G., ... & Paz, A. (2018). Volatiles Loss from water bearing regolith simulant at Lunar Environments. In Earth and Space 2018: Engineering for Extreme Environments (pp. 454-466). Reston, VA: American Society of Civil Engineers.

A Paz↗

NASA NTRSDate not supplied

Extraction and Analysis of the Properties of Shape Memory Alloys

Shape Memory Alloys (SMA) are materials of high industrial importance, increasingly used for the aerospace applications. Use of SMA allows to simplify flight systems and reduce the total weight. Through the literature-based data mining, we extracted the computed SMA properties from the high-impact journals. We plotted the selected pairs of properties, found and parametrized correlations.

Jason Ernesto Diaz↗

NASA NTRSDate not supplied

Lunar Helium-3: Mining Concepts, Extraction Research, and Potential ISRU Synergies

This paper describes various methods and designs specifically proposed for mining helium-3, and summarizes the methods, results and potential implications of recent research on helium extraction from lunar regolith simulant. This paper also touches on the potential synergy of lunar propellant production with helium-3 mining and some of the recent advancements in fusion technology related to future helium-3 fueled fusion reactors.

Lunar↗

NASA NTRSDate not supplied

Lunar Helium-3: Mining Concepts, Extraction Research, and Potential ISRU Synergies

This paper describes various methods and designs specifically proposed for mining helium-3, and summarizes the methods, results and potential implications of recent research on helium extraction from lunar regolith simulant. This paper also touches on the potential synergy of lunar propellant production with helium-3 mining and some of the recent advancements in fusion technology related to future helium-3 fueled fusion reactors.

Lunar↗

NASA NTRS2020

Barefoot Rover: a Sensor-Infused Rover Wheel Demonstrating In-Situ Engineering and Science Extractions using Machine Learning

In this work, we demonstrate an instrumented wheel concept which utilizes a 2D pressure grid, an electrochemical impedance spectroscopy (EIS) sensor and machine learning (ML) to extract meaningful metrics from the interaction between the wheel and surface terrain. These include continuous slip/skid estimation, balance, and sharpness for engineering applications. Estimates of surface hydration, texture, terrain patterns, and regolith physical properties such as cohesion and angle of internal friction are additionally calculated for science applications. Traditional systems rely on post-processing of visual images and vehicle telemetry to estimate these metrics. Through in-situ sensing, these metrics can be calculated in near real time and made available to onboard science and engineering autonomy applications. This work aims to provide a deployable system for future planetary exploration missions to increase science and engineering capabilities through increased knowledge of the terrain.

Marchetti, Yuliya↗

NASA NTRSDate not supplied

Spacecraft Material Characterization Using Reflectance Spectra Extracted from RGB/IR Color Images

The space environment is detrimental to the exterior of the spacecraft and imposes stringent requirements on spacecraft materials. Space materials are often expected to perform for 15-20 years in the harsh space environment without significant degradation of their optical, electrical, mechanical and thermal properties. Further, as commercial activities increase in the space domain, development of predictive capability for material evolution is critical for agile adaption of novel materials. Therefore, it is very important to understand the effects of the space environments on the spacecraft materials. The Materials on the International Space Station Experiment Flight Facility (MISSE-FF) has flown numerous material samples to investigate the effect of LEO space weather exposure on the performance and durability of materials and devices. We are manifest on the MISSE-16 mission, scheduled to launch in June 2022, to fly fifteen novel and well-characterized materials in the LEO environment for a duration of six months. Changes in spectral reflectivity will be measured in real time throughout the mission with an RGB/IR camera. These time-resolved data will function as a "space-truth" reference for our team's ongoing laboratory-based space weather-material interaction experiments. Correlation of the MISSE-16 data with extensive ground testing of duplicate samples under simulated space weather conditions will enable development of fundamental chemical models for material degradation. This paper discusses preliminary results from the ground test campaign to collect the RGB/IR images for pristine and damaged materials and the development of machine learning algorithms to extract reflectance spectra from the color images.

Jainisha R. Shah↗

NASA NTRSDate not supplied

Spacecraft Material Characterization Using Reflectance Spectra Extracted from RGB/IR Color Images

The space environment is detrimental to the exterior of the spacecraft and imposes stringent requirements on spacecraft materials. Space materials are often expected to perform for 15-20 years in the harsh space environment without significant degradation of their optical, electrical, mechanical and thermal properties. Further, as commercial activities increase in the space domain, development of predictive capability for material evolution is critical for agile adaption of novel materials. Therefore, it is very important to understand the effects of the space environments on the spacecraft materials. The Materials on the International Space Station Experiment Flight Facility (MISSE-FF) has flown numerous material samples to investigate the effect of LEO space weather exposure on the performance and durability of materials and devices. We are manifest on the MISSE-16 mission, scheduled to launch in June 2022, to fly fifteen novel and well-characterized materials in the LEO environment for a duration of six months. Changes in spectral reflectivity will be measured in real time throughout the mission with an RGB/IR camera. These time-resolved data will function as a "space-truth" reference for our team's ongoing laboratory-based space weather-material interaction experiments. Correlation of the MISSE-16 data with extensive ground testing of duplicate samples under simulated space weather conditions will enable development of fundamental chemical models for material degradation. This paper discusses preliminary results from the ground test campaign to collect the RGB/IR images for pristine and damaged materials and the development of machine learning algorithms to extract reflectance spectra from the color images.

Jainisha R. Shah↗

NASA NTRSDate not supplied

HF Vapor Etching for Stardust Particle Extraction: A Progress Report

The Stardust mission captured thousands of particles from Jupiter-family comet 81P/Wild 2 using aluminum foil and silica aerogel collection media [1]. Most studies of Wild 2 material examine refractory terminal particles >1 μm in diameter which are extracted individually from the ends of tracks produced by the particle’s impact into the aerogel medium. A substantial (>65 %) mass fraction of the impactors is present as fine-grained (i.e. <1 μm) material in the ‘bulb’ and walls of the tracks, which may contain preserved organic material and presolar grains [2]. Few presolar grains have been identified in Stardust samples, which has been interpreted as owing to destruction upon impact into the foils and preferential sampling of terminal particles rather than a lack of presolar grains in Wild 2 samples [3-5]. By isolating the fine-grained material from these bulbs and performing microbeam and isotopic analyses (i.e., scanning electron microscopy and NanoSIMS), organic matter and presolar grains can be identified and constraints can be placed on the constituents of primitive outer solar system materials.

Stardust↗

NASA NTRSDate not supplied

Metal Extraction Lunar Technology from Carbothermal Reduction (MELT-CR)

Large metallic infrastructure components on the Moon are currently cost prohibitive due to the expense of transporting mass to the lunar surface. Astrobotic has quoted upwards of $1.2 million dollars per kilogram of payload to the surface. Advantageously, however, aluminum is present in great quantities as aluminum silicates on the lunar surface. And because aluminum is ductile, highly conductive, and amendable for advanced manufacturing processes such as wire fed directed energy deposition (DED), if it can be refined from regolith, its utilization can enable cost-effective, on-surface manufacturing of metallic infrastructure. The goal of project is to develop the core processes and technologies to extract aluminum from Lunar regolith and refine it into wire feedstock from a carbothermic reduction process.

ISRU↗

NASA NTRSDate not supplied

Extracting Lessons of Human Performance and Resilience Management from a Study of Weather-Related Safety Risks and Incidents Reported to NASA's Aviation Safety Reporting System (ASRS)

We present a study of weather-related incident reports submitted to NASA’s Aviation Safety Reporting System (ASRS) by air carrier pilots and air traffic controllers in the US. Using specific examples, we examine the weather-related risks reported and the relevant aspects of human performance and resilience management exhibited during these incidents. We describe our methods of lesson extraction to maximize learning, including the use of advance algorithms, and we conclude with a review of the weather-related risks encountered and the resilient practices employed to mitigate them.

resilience↗

NASA NTRSDate not supplied

Extraction of Thruster Plume Ion Population Trends From Retarding Potential Analyzer Data

Characterization of ion plume impingement effects on spacecraft surfaces requires knowledge of the ion energy distributions in the thruster plume. Retarding potential analyzers are a convenient diagnostic that provide measurements of the ion voltage distributions. This work presents an attempt to extract additional information via fitting multiple Maxwellian distributions to the diagnostic traces. Tracking the trends of the fitted ion populations across varying facility pressure, angular location, and thruster operating conditions offers further insight into the makeup of the plume plasma and the behavior of the ion energies as a function of those parameters. This approach provides supporting evidence in establishing margins and building further confidence in the plume modeling validation process.

John T. Yim↗

NASA NTRSDate not supplied

Comparing Methods to Extract Sectional Angle of Attack From Blade-Resolved Rotor Simulations

The angle of attack is widely used to describe the aerodynamics of rotor blades. Models based on lifting lines, actuator lines, and actuator disks use it as a primary variable, assuming the aerodynamics can be represented by the flow around a collection of equivalent 2D airfoils. This paper evaluates the accuracy of existing methods that extract the angle of attack from blade-resolved CFD simulations, towards enabling a direct comparison of angle of attack between blade-resolved and blade-modeled simulations. Results are compared for a 2D airfoil for which the angle of attack is known by definition. The hovering rotor case is also considered, where we look at two different rotor blades. We discuss the factors that impact the accuracy of the 2D predictions. For the 3D rotors, we show that three-dimensional effects in the root and tip regions lead to large discrepancies between methods. This suggests that the very definition of angle of attack is unable to accurately represent the flow in these regions. Finally, based on guidelines that we establish, we propose an alternate method that uses local velocities sampled on a contour located 0.25 chord, or less, away from the airfoil surface and generally yields improved accuracy compared to most existing techniques.

ARMD↗

DOE OSTI2015

Energy Extraction from a Slider-Crank Wave Energy under Irregular Wave Conditions: Preprint

A slider-crank wave energy converter (WEC) is a novel energy conversion device. It converts wave energy into electricity at a relatively high efficiency, and it features a simple structure. Past analysis on this particular WEC has been done under regular sinusoidal wave conditions, and suboptimal energy could be achieved. This paper presents the analysis of the system under irregular wave conditions; a time-domain hydrodynamics model is adopted and a rule-based control methodology is introduced to better serve the irregular wave conditions. Results from the simulations show that the performance of the system under irregular wave conditions is different from that under regular sinusoidal wave conditions, but a reasonable amount of energy can still be extracted.

17 WIND ENERGY↗

DOE OSTI2015

Enhanced spot preparation for liquid extractive sampling and analysis

A method for performing surface sampling of an analyte, includes the step of placing the analyte on a stage with a material in molar excess to the analyte, such that analyte-analyte interactions are prevented and the analyte can be solubilized for further analysis. The material can be a matrix material that is mixed with the analyte. The material can be provided on a sample support. The analyte can then be contacted with a solvent to extract the analyte for further processing, such as by electrospray mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Antimicrobial and anti-inflammatory activity of switchgrass-derived extractives

Switchgrass is an increasingly important biofuel crop, but knowledge of switchgrass fungal pathogens is not extensive. The purpose of this research was to identify the fungal pathogens that decrease crop yield of switchgrass grown in Tennessee and to investigate a potential sustainable disease management strategy from a value-added by-product of the switchgrass biofuel conversion process. The specific objectives were 1) to identify and characterize prevalent fungal pathogens of switchgrass in Tennessee, 2) assess switchgrass seed produced in the United States for seedborne fungal pathogens, and 3) evaluate switchgrass extractives for antimicrobial activity against plant pathogens.

09 BIOMASS FUELS↗