Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Performance of Public Film Cooling Geometries Produced Through Additive Manufacturing

Abstract Film cooling is an essential cooling technology to allow modern gas turbines to operate at high temperatures. For years, researchers in this community have worked to improve the effectiveness of film cooling configurations by maximizing the coolant coverage and minimizing the heat flux from the hot gas into the part. Working toward this goal has generated many promising film cooling concepts with unique shapes and configurations. However, until recently, many of these designs were challenging to manufacture in actual turbine hardware due to limitations with legacy manufacturing methods. Now, with the advances in additive manufacturing, it is possible to create turbine parts using high-temperature nickel alloys that feature detailed and unique geometry features. Armed with this new manufacturing power, this study aims to build and test the promising designs from the public literature that were previously difficult or impossible to implement. In this study, different cooling hole designs were manufactured in test coupons using a laser powder bed fusion process. Each nickel alloy coupon featured a single row of engine scale cooling holes, fed by a microchannel. To evaluate performance, the overall cooling effectiveness of each coupon was measured using a matched Biot test at engine relevant conditions. The results showed that certain hole shapes are better suited for additive manufacturing than others and that the manufacturing process can cause significant deviations from the performance reported in the literature.

Engineering↗

High energy storage properties of (Ni1/3Nb2/3)4+ complex-ion modified (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 ceramics

Highlights: • BCZT-xNN ceramics showed single phase perovskite structure without an obvious second phase after adding NN, and exhibited both good temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz) stability. • The highest energy storage density can reach 0.66 J/cm{sup 3} and the energy efficiency is 88.1% was achieved in x = 0.3. • The environmental friendly (lead-free) BCZT-xNN ceramics are good candidate for application in energy storage devices. • This paper also developes a new method to obtain high energy storage density and efficiency of ceramic capacitor, which aims to adjust the T{sub c} of ceramics far below room temperature. - Abstract: In this study, paraelectric ceramics, (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90}){sub 1-x}(Ni{sub 1/3}Nb{sub 2/3}){sub x}O{sub 3,} abbreviated as BCZT-xNN (with x = 0.1, 0.2, 0.3, 0.4) were prepared via a solid-state reaction method. By introducing a B-site complex-ion, (Ni{sub 1/3}Nb{sub 2/3}){sup 4+}, the Curie temperature of the ceramic could be reduced to below room temperature. The effects of this B-site (Ni{sub 1/3}Nb{sub 2/3}){sup 4+} complex-ion substitution on the phase structure, surface microstructure as well as the dielectric, ferroelectric, and energy storage properties of the ceramic were systematically investigated. After adding NN, BCZT-xNN shows a single phase perovskite structure without evidence of a second phase . In addition, we observed high stability with respect to both temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz). Doping with NN produces slim polarization-electric field hysteresis loops and enhanced energy storage properties, while the efficiency decreases. When x = 0.3, the highest energy storage density reached 0.66 J/cm{sup 3} for a high electric field (20 kV/mm), and the respective energy efficiency was 88.1%. These properties indicate that the environmental friendly BCZT-xNN ceramics are promising candidates for commercial energy storage devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Acoustic MEMS Sensor Array for Quench Detection of CICC Superconducting Cables

A novel quench detection method using microelectro- mechanical system (MEMS) sensor technology has been investigated in use for high temperature superconducting (HTS) conductors such REBCO tape cables. The sensor array along a superconducting cable, such as a cable-in-conduit-conductor (CICC), is installed in a cooling channel. It will allow sensitive and quick detection for a local quench of a superconducting cable. This work has confirmed that a quench of a single REBCO tape can be detected in liquid nitrogen by a MEMS piezoelectric microphone sensor. The quench detection design utilizing a MEMS sensor array method is discussed for the case of a toroidal field (TF) magnets of a fusion Tokamak device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A quantitative phase-field model for gas bubble evolution in UO2

Due to the large formation energy of vacancies and noble gas atoms in the form of interstitials or substitutional atoms in nuclear fuel (UO2), the thermodynamic equilibrium concentrations of these species are very low in the nuclear fuel matrix even at very high temperatures, which imposes difficulties upon the quantitative study of bubble evolution via the phase-field method. In this study, a quantitative phase-field model is proposed to deal with this problem. The system’s free energy density is derived according to the principles of thermodynamics, with consideration of the elastic effect and with the use of real material parameters from experiments. The model is useful for the study of the kinetics of gas bubble growth with very dilute concentrations of vacancy and gas atoms in the matrix. This model is applied to study single bubble growth and multiple bubble growth under various concentrations of vacancy and gas atoms and at various temperatures. The elastic effect and the effects of the generation rate of vacancies and gas atoms on bubble growth are analyzed.

low defect concentration, nuclear fuel, gas bubble↗

Approximate bounds and temperature dependence of adiabatic connection integrands for the uniform electron gas

Thermal density functional theory is commonly used in simulations of warm dense matter, a highly energetic phase characterized by substantial thermal effects and by correlated electrons demanding quantum mechanical treatment. Methods that account for temperature dependence, such as Mermin–Kohn–Sham finite-temperature density functional theory and free energy density functional theory, are now employed with more regularity and available in many standard code packages. However, approximations from zero-temperature density functional theory are still often used in temperature-dependent simulations using thermally weighted electronic densities as an input to exchange–correlation functional approximations, a practice known to miss temperature-dependent effects in the exchange–correlation free energy of these systems. Here, in this work, the temperature-dependent adiabatic connection is demonstrated and analyzed using a well-known parameterization of the uniform electron gas free energy. Useful tools based on this formalism for analyzing and constraining approximations of the exchange–correlation at zero temperature are leveraged for the finite-temperature case. Inspired by the Lieb–Oxford inequality, which provides a lower bound for the ground-state exchange–correlation energy, bounds for the exchange–correlation at finite temperatures are approximated for various degrees of electronic correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials and technologies for interstellar flights and intra-galactic spread of life

Small automated spaceships are capable to deliver seeds, frozen ova and gametes to other planetary systems. A spaceship can be equipped with a freezer containing reproductive cells, an artificial uterus, a robotic nursery and school, and a collection of instruments and equipment. The whole spaceship will be frozen during a long interstellar flight. Approaching another star, a spaceship will generate electricity from light, warm up, slow down and land on a suitable planet (if any), give birth to a human, provide care and education. After schooling, the human will vacate the spaceship and either build more space for living (using local materials) or die. A vacant spaceship will supply more people, one at a time. Hopefully, they will collectively create a sustainable colony on a remote planet. Our Milky Way galaxy has hundreds billion stars (i.e., more stars than humans on Earth). Mass production of spacecrafts for intragalactic spread of life will make each spaceship cheaper, will improve employment and purposeful production on Earth, and will spread human life beyond the Solar System. If any spaceship will miss its target stellar system, it will fly to the next one, retaining ability to bring life to another planet. Which materials and technologies are needed for the interstellar life propagation? Materials age during a long interstellar flight, which can last from 10^4 to 10^10 years. We evaluate the computational methods (such as C2NEB, available from https://lib.dr.iastate.edu/ameslab_software/1) that are suitable for addressing materials aging at low temperatures and high radiation levels during the appropriately long-time scales.

Technologies↗

Proton-Conducting Solid Oxide Electrolysis Cells for Large-scale Hydrogen Production at Intermediate Temperatures

Proton-conducting electrolyte based SOECs offer potential for operation at low to intermediate temperatures. Although yttrium-doped barium zirconate (BZY) and ceria-doped barium zirconate (BCY) have conductivity of 0.01 and 0.017 S.cm -1 respectively at 650C in comparison to the conductivity of 0.015 S.cm -1 for 8-YSZ at 850°C, there remains technology gaps and research needs related to understanding of chemical and structural stability in oxidizing and/or reducing atmospheres at intermediate temperatures, material processing and densification techniques, high polarization losses, and electrode poisoning due to intrinsic and extrinsic gas phase contaminants. Synthesis methods have produced proton-conducting materials and cells that met degradation rate targets, showcasing stable hydrogen production. Improved performance was evident in the HSOEC cell, achieving higher hydrogen production at a lower operating temperature compared to standard cells. Collaborations with multiple research facilities ensured scaling up of synthesis processes and milestone achievements for large-scale manufacturing. Assessment of contaminants revealed their adverse effects on electrode performance and structural stability. Contaminants like Cr and Si compounds, in high humidity, degraded electrodes by forming stable silicate and chromates, inhibiting active surface reactions. Getter materials showed promise in capturing contaminants, suggesting potential for mitigation.

08 HYDROGEN↗

In-Situ Testing Methods for Mixed-Mode Harsh Environments

Future NASA missions are driving a need for instrumentation and space electronics that will operate at extreme temperatures, with low mass and extended deployments. This need results in devices that will experience dose damage at both low and high temperatures that will suppress annealing and induce accelerated wear out issues. Therefore, the ability to perform radiation tests on devices at temperature is critical. This paper analyses the methods and process to enable these test as developed at the JPL Dynamitron Facility. Since electronics are the radiation source for this facility, the steps to ensure parity with cobalt-60 testing are discussed. Also discussed are the implications for system level testing and mixed radiation mode testing for highly integrated and scaled devices.

Scheick, Leif Z↗

Tunable Diode Laser Sensors to Monitor Temperature and Gas Composition in High-Temperature Coal Gasifiers

The integrated gasification combined cycle (IGCC) when combined with carbon capture and storage can be one of the cleanest methods of extracting energy from coal. Control of coal and biomass gasification processes to accommodate the changing character of input-fuel streams is required for practical implementation of integrated gasification combined-cycle (IGCC) technologies. Therefore a fast time-response sensor is needed for real-time monitoring of the composition and ideally the heating value of the synthesis gas (here called syngas) as it exits the gasifier. The goal of this project was the design, construction, and demonstration an in situ laserabsorption sensor to monitor multiple species in the syngas output from practical-scale coal gasifiers. This project investigated the hypothesis of using laser absorption sensing in particulateladen syngas. Absorption transitions were selected with design rules to optimize signal strength while minimizing interference from other species. Successful in situ measurements in the dusty, high-pressure syngas flow were enabled by Stanford’s normalized and scanned wavelength modulation strategy. A prototype sensor for CO, CH4, CO2, and H2O was refined with experiments conducted in the laboratory at Stanford University, a pilot-scale at the University of Utah, and an engineering-scale gasifier at DoE’s National Center for Carbon Capture with the demonstration of a prototype sensor with technical readiness level 6 in the 2014 measurement campaign.

01 COAL, LIGNITE, AND PEAT↗

Computational approach to the study of thermal spin crossover phenomena

The key parameters associated to the thermally induced spin crossover process have been calculated for a series of Fe(II) complexes with mono-, bi-, and tridentate ligands. Combination of density functional theory calculations for the geometries and for normal vibrational modes, and highly correlated wave function methods for the energies, allows us to accurately compute the entropy variation associated to the spin transition and the zero-point corrected energy difference between the low- and high-spin states. From these values, the transition temperature, T{sub 1/2}, is estimated for different compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel strategy to improve the thermostability of Penicillium camembertii mono- and di-acylglycerol lipase

Highlights: • A new protein engineering method has been developed to tailor enzyme with high thermostability. • The optimum catalytic temperature of mutant D25R was increased by 5 °C. • Tm value of mutant D25R was increase by 3 °C. • Mutant D25R showed the increase in t{sub 1/2} with a nearly 4-fold. Penicillium camembertii (PCL), a mono- and di-acylglycerol lipase (DGL), has the vital potential in the oil chemistry for food industry. However, known DGLs are mesophilic enzymes which restricts its application in the industry. To improve thermostability of PCL, we used amino acid substitution by comparison of amino acids compositions of PCL and protein sequences from typical thermophilic bacteria. Then, some conservative residues around active center were avoided to mutate according to homologous alignment analyses. Furthermore, the list was narrowed down to 28 candidate mutational sites of PCL by analyzing the hydrophobic interaction of amino acids in the structure. And among them only the mutant PCL-D25R had formed an additional salt bridge between R25-D32 and increased more hydrogen bonds interaction. Therefore, mutant PCL-D25R were constructed and expressed. Thermal inactivation assay showed that the half-life of mutant PCL-D25R at 45 °C increased 4-fold compared to that of PCL-WT. Melting temperature of mutant PCL-D25R increased to 49.5 °C from 46.5 °C by fluorescence-based thermal stability assay. This study provides a valuable strategy for engineering DGL thermostability.

60 APPLIED LIFE SCIENCES↗

Crystal chemistry of anhydrous Li uranyl phosphates and arsenates. II. Tubular fragments and cation-cation interactions in the 3D framework structures of Li{sub 6}[(UO{sub 2}){sub 12}(PO{sub 4}){sub 8}(P{sub 4}O{sub 13})], Li{sub 5}[(UO{sub 2}){sub 13}(AsO{sub 4}){sub 9}(As{sub 2}O{sub 7})], Li[(UO{sub 2}){sub 4}(AsO{sub 4}){sub 3}] and Li{sub 3}[(UO{sub 2}){sub 7}(AsO{sub 4}){sub 5}O]

Single crystals of the new compounds Li{sub 6}[(UO{sub 2}){sub 12}(PO{sub 4}){sub 8}(P{sub 4}O{sub 13})] (1), Li{sub 5}[(UO{sub 2}){sub 13}(AsO{sub 4}){sub 9}(As{sub 2}O{sub 7})] (2), Li[(UO{sub 2}){sub 4}(AsO{sub 4}){sub 3}] (3) and Li{sub 3}[(UO{sub 2}){sub 7}(AsO{sub 4}){sub 5}O)] (4) have been prepared using high-temperature solid state reactions. The crystal structures have been solved by direct methods: 1-monoclinic, C2/m, a=26.963(3) A, b=7.063(1) A, c=19.639(1) A, beta=126.890(4){sup o}, V=2991.2(6) A{sup 3}, Z=2, R{sub 1}=0.0357 for 3248 unique reflections with |F{sub 0}|>=4sigma{sub F}; 2-triclinic, P1-bar, a=7.1410(8) A, b=13.959(1) A, c=31.925(1) A, alpha=82.850(2){sup o}, beta=88.691(2){sup o}, gamma=79.774(3){sup o}, V=3107.4(4) A{sup 3}, Z=2, R{sub 1}=0.0722 for 9161 unique reflections with |F{sub 0}|>=4sigma{sub F}; 3-tetragonal, I4{sub 1}/amd, a=7.160(3) A, c=33.775(9) A, V=1732(1) A{sup 3}, Z=4, R{sub 1}=0.0356 for 318 unique reflections with |F{sub 0}|>=4sigma{sub F}; 4-tetragonal, P4-bar, a=7.2160(5) A, c=14.6540(7) A, V=763.04(8) A{sup 3}, Z=1, R{sub 1}=0.0423 for 1600 unique reflections with |F{sub 0}|>=4sigma{sub F}. Structures of all the phases under consideration are based on complex 3D frameworks consisting of different types of uranium polyhedra (UO{sub 6} and UO{sub 7}) and different types of tetrahedral TO{sub 4} anions (T=P or As): PO{sub 4} and P{sub 4}O{sub 13} in 1, AsO{sub 4} and As{sub 2}O{sub 7} in 2, and single AsO{sub 4} tetrahedra in 3 and 4. In the structures of 1 and 2, UO{sub 7} pentagonal bipyramids share edges to form (UO{sub 5}){sub i}nfinity chains extended along the b axis in 1 and along the a axis in 2. The chains are linked via single TO{sub 4} tetrahedra into tubular units with external diameters of 11 A in 1 and 11.5 A in 2, and internal diameters of 4.1 A in 1 and 4.5 A in 2. The channels accommodate Li{sup +} cations. The tubular units are linked into 3D frameworks by intertubular complexes. Structures of 3 and 4 are based on 3D frameworks composed on layers united by (UO{sub 5}){sub i}nfinity infinite chains. Cation-cation interactions are observed in 2, 3, and 4. In 2, the structure contains a trimeric unit with composition [O=U(1)=O]-U(13)-[O=U(2)=O]. In the structures of 3 and 4, T-shaped dimers are observed. In all the structures, Li{sup +} cations are located in different types of cages and channels and compensate negative charges of anionic 3D frameworks. - Graphical abstract: The crystal structures of Li{sub 5}[(UO{sub 2}){sub 13}(AsO{sub 4}){sub 9}(As{sub 2}O{sub 7})] separated into tubular units and intertubular complexes.

36 MATERIALS SCIENCE↗

Preparation and characterization of LiNiVO{sub 4} powder and non-stoichiometric LiNi{sub x}V{sub y}O{sub z} films

Inverse spinel type structured oxide, LiNiVO{sub 4}, was synthesized by using solid-state method and the crystalline powder was characterized by Rietveld refinement and X-ray photoelectron spectroscopy. Non-stoichiometric lithium nickel vanadate thin films were prepared by physical vapour deposition technique. The amorphous films were characterized by Rutherford back-scattering spectroscopy (RBS), nuclear reaction analysis (NRA), Auger electron spectroscopy (AES), X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) analytical methods. Films crystal growth at various temperatures was also studied by XRD and SEM. The HRTEM analysis of sputtered film shows nanocrystalline domains of NiO and LiNiVO{sub 4} phases with characteristic lattice parameters of the host compound and the results correlate well with the XRD data. Electrochemical properties of the films were discussed.

36 MATERIALS SCIENCE↗

Structural characterization, thermoluminescence and EPR studies of Nd{sub 2}O{sub 3}:Co{sup 2+} nanophosphors

Graphical abstract: Display Omitted Highlights: ► Nd{sub 2}O{sub 3}:Co{sup 2+} (1–4 mol%) nanophosphors have been prepared at much lower temperatures. ► Phosphors are well characterized by PXRD, SEM, TEM, FTIR, Raman, UV–vis spectroscopy. ► EPR and thermoluminescence properties were also reported. ► TL intensity increases linearly with γ dose suggesting usage in radiation dosimetry. -- Abstract: Nd{sub 2}O{sub 3}:Co{sup 2+} (1–4 mol%) nanophosphors (15–25 nm) have been prepared via low temperature solution combustion method. Scanning electron micrograph (SEM) shows that the product is highly porous in nature. The stokes line in the Raman spectrum at ∼2000 cm{sup −1} is assigned to F{sub g} mode and the anti-stokes lines are assigned to a combination of A{sub g} + E{sub g} modes. With increase of Co{sup 2+} concentration, the intensity of F{sub g} mode decreases, whereas the combination of A{sub g} + F{sub g} modes completely disappears. Electron paramagnetic resonance (EPR) spectrum exhibits two resonance signals with effective g values at g = 2.25 and g = 2.03. Thermoluminescence (TL) response of Nd{sub 2}O{sub 3}:Co{sup 2+} nanopowders with γ dose 0.23–2.05 kGy was studied. The activation energy (E) and frequency factor (s) are estimated using Chen's glow peak shape method and obtained to be in the range 0.45–1.67 eV and 1.8 × 10{sup 4} to 4.0 × 10{sup 12} s{sup −1}, respectively. It is observed that the TL glow peak intensity at 430 K increases linearly with γ dose which is suitable for radiation dosimetry.

36 MATERIALS SCIENCE↗

Energy storage based on SrCO 3 and Sorbents—A probabilistic analysis towards realizing solar thermochemical power plants

As greenhouse gases threaten our environment, it has become increasingly necessary to replace consumption of fossil fuels with renewable energy. Without energy storage, solar cannot provide power at night during times of peak demand, resulting in a gap between supply capabilities and demand. Solar thermochemical energy storage (TCES) has potential to resolve this critical temporal issue. An 800MWh th TCES subsystem has been designed to cost-effectively convert solar energy to electricity. An evaluation of each required component is provided, including the reactor chemistry. Strontium carbonate decomposition is used to densely store high temperature thermal energy via chemical reaction, while two different CO 2 storage methods are considered. To determine the practical feasibility of these schemes, a probabilistic analysis has been performed to explore exergy and energy efficiency, and cost. It has been found that a scheme storing CO 2 via sorbents is capable of ~71% energy and ~87% exergy efficiency, and an installed cost of ~48 USD kWh th -1 .

25 ENERGY STORAGE↗

High-Quality SnSe 2 Single Crystals: Electronic and Thermoelectric Properties

In this work, high-quality SnSe 2 single crystals were successfully synthesized using a temperature gradient method. N-type characteristics and strong anisotropic transport properties of SnSe 2 single crystals were exhibited between the ab plane and the c-axis. At 673 K, the power factor (PF) value along the ab plane is 3.43 μW cm -1 K -2 , while it is 0.92 μW cm -1 K -2 along the c-axis. The ratio between thermal conductivities along the ab plane (κ ab ) and c-axis (κ c ) is on the order of 7.6 at 300 K, while this value is about 5.6 at 673 K. The thermoelectric figure of merit (ZT) in the c-axis (0.15) is higher than that (0.1) along the ab plane, according to the ultralow out-of-plane thermal conductivity. The electronic band structure results, which were examined by angle-resolved photoemission spectroscopy (ARPES) predicted the potential of improving the thermoelectric performance of SnSe 2 single crystals by electron doping.

36 MATERIALS SCIENCE↗

Synthesis of Fluorine-Doped Lithium Argyrodite Solid Electrolytes for Solid-State Lithium Metal Batteries

Solid-state lithium metal batteries (SSLMBs) that utilize novel solid electrolytes (SEs) have garnered much attention because of their potential to yield safe and high-energy-density batteries. Sulfide-based argyrodite-class SEs are an attractive option because of their impressive ionic conductivity. Recent studies have shown that LiF at the interface between Li and SE enhances electrochemical stability. However, the synthesis of F-doped argyrodites has remained challenging because of the high temperatures used in the state-of-the-art solid-state synthesis methods. In this work, for the f irst time, we report F-doped Li 5+y PS 5 F y argyrodites with a tunable doping content and dual dopants (F-/Cl- and F-/Br-) that were synthesized through a solvent-based approach. Among all compositions, Li 6 PS 5 F 0.5 C l0.5 exhibits the highest Li-ion conductivity of 3.5 x 10 -4 S cm -1 at room temperature (RT). Furthermore, Li symmetric cells using Li 6 PS 5 F 0.5 Cl 0.5 show the best cycling performance among the tested cells. X-ray photoelectron spectroscopy and ab initio molecular dynamics simulations revealed that the enhanced interfacial stability of Li 6 PS 5 F 0.5 C l0.5 SE against Li metal can be attributed to the formation of a stable solid electrolyte interphase (SEI)-containing conductive species (Li 3 P), alongside LiCl and LiF. These findings open new opportunities to develop high-performance SSLMBs using a novel class of F-doped argyrodite electrolytes.

25 ENERGY STORAGE↗

Epitaxial Ni-Mn-Ga-Co thin films on PMN-PT substrates for multicaloric applications

Multicaloric stacks consisting of a magnetocaloric film on a piezoelectric substrate promise improved caloric properties as the transition temperature can be controlled by both magnetic and electric fields. We present epitaxially grown magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.72}Ti{sub 0.28}O{sub 3} substrates. Structure and microstructure of two samples, being in the austenitic and martensitic state at room temperature, are investigated by X-ray diffraction in two- and four-circle geometry and by atomic force microscopy. In addition, high temperature magnetometry was performed on the latter sample. The combination of these methods allows separating the influence of epitaxial growth and martensitic transformation. A preferential alignment of twin boundaries is observed already in the as-deposited state, which indicates the presence of prestress, without applying an electric field to the substrate. A temperature-magnetic field phase diagram is presented, which demonstrates the inverse magnetocaloric effect of the epitaxial Ni-Mn-Ga-Co film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗