Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Analysis of High-Te Plasmas Heated by HHFW in NSTX

The implementation in TRANSP of a recent version of TORIC capable of calculating power deposition for HHFW conditions is used to analyze NSTX plasma under different operating conditions. The power deposition profile into the electrons is obtained for high-Te conditions - Te ≤ 5keV - obtained in He and D plasmas with ITB. HHFW heating of NBI-induced H-mode plasmas is discussed. At the RF onset the RF power is divided evenly between the electrons and the fast particles, but as the latter thermalize and the electron density increases, the HHFW power repartition shifts progressively toward the electrons. Power deposition profiles for the electrons and for the fast particles are shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impossibility of large phase shifts via the giant Kerr effect with single-photon wave packets

An approximate analytical solution is presented, along with numerical calculations, for a system of two single-photon wave packets interacting via an ideal, localized Kerr medium. It is shown that, because of spontaneous emission into the initially unoccupied temporal modes, the cross-phase-modulation in the Schroedinger picture is very small as long as the spectral width of the single-photon pulses is well within the medium's bandwidth. In this limit, the Hamiltonian used can be derived from the 'giant Kerr effect' for a four-level atom, under conditions of electromagnetically induced transparency; it is shown explicitly that the linear absorption in this system increases as the pulse's spectral width approaches the medium's transparency bandwidth, and hence, as long as the absorption probability remains small, the maximum cross-phase-modulation is limited to essentially useless values. These results are in agreement with the general, causality-based, and unitarity-based arguments of Shapiro and Razavi [J. H. Shapiro, Phys. Rev. A 73, 062305 (2006); J. H. Shapiro and M. Razavi, New J. Phys. 9, 16 (2007)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controls on Stable Methane Isotope Values in Northern Peatlands and Potential Shifts in Values Under Permafrost Thaw Scenarios

Abstract Northern peatlands are a globally significant source of methane (CH 4 ), and emissions are projected to increase due to warming and permafrost loss. Understanding the microbial mechanisms behind patterns in CH 4 production in peatlands will be key to predicting annual emissions changes, with stable carbon isotopes (δ 13 C‐CH 4 ) being a powerful tool for characterizing these drivers. Given that δ 13 C‐CH 4 is used in top‐down atmospheric inversion models to partition sources, our ability to model CH 4 production pathways and associated δ 13 C‐CH 4 values is critical. We sought to characterize the role of environmental conditions, including hydrologic and vegetation patterns associated with permafrost thaw, on δ 13 C‐CH 4 values from high‐latitude peatlands. We measured porewater and emitted CH 4 stable isotopes, pH, and vegetation composition from five boreal‐Arctic peatlands. Porewater δ 13 C‐CH 4 was strongly associated with peatland type, with δ 13 C enriched values obtained from more minerotrophic fens (−61.2 ± 9.1‰) compared to permafrost‐free bogs (−74.1 ± 9.4‰) and raised permafrost bogs (−81.6 ± 11.5‰). Variation in porewater δ 13 C‐CH 4 was best explained by sedge cover, CH 4 concentration, and the interactive effect of peatland type and pH (r 2 = 0.50,p < 0.001). Emitted δ 13 C‐CH 4 varied greatly but was positively correlated with porewater δ 13 C‐CH 4 . We calculated a mixed atmospheric δ 13 C‐CH 4 value for northern peatlands of −65.3 ± 7‰ and show that this value is more sensitive to landscape drying than wetting under permafrost thaw scenarios. Our results suggest northern peatland δ 13 C‐CH 4 values are likely to shift in the future which has important implications for source partitioning in atmospheric inversion models.

Environmental Sciences & Ecology↗

Extreme Radiation Hardness and Space Qualification of AlGaN Optoelectronic Devices

Unprecedented radiation hardness and environment robustness are required in the new generation of high energy density physics (HEDP) experiments and deep space exploration. National Ignition Facility (NIF) break-even shots will have a neutron yield of 1015 or higher. The Europa Jupiter System Mission (EJSM) mission instruments will be irradiated with a total fluence of 1012 protons/cm2 during the space journey. In addition, large temperature variations and mechanical shocks are expected in these applications under extreme conditions. Hefty radiation and thermal shields are required for Si and GaAs based electronics and optoelectronics devices. However, for direct illumination and imaging applications, shielding is not a viable option. It is an urgent task to search for new semiconductor technologies and to develop radiation hard and environmentally robust optoelectronic devices. We will report on our latest systematic experimental studies on radiation hardness and space qualifications of AlGaN optoelectronic devices: Deep UV Light Emitting Diodes (DUV LEDs) and solarblind UV Photodiodes (PDs). For custom designed AlGaN DUV LEDs with a central emission wavelength of 255 nm, we have demonstrated its extreme radiation hardness up to 2x1012 protons/cm2 with 63.9 MeV proton beams. We have demonstrated an operation lifetime of over 26,000 hours in a nitrogen rich environment, and 23,000 hours of operation in vacuum without significant power drop and spectral shift. The DUV LEDs with multiple packaging styles have passed stringent space qualifications with 14 g random vibrations, and 21 cycles of 100K temperature cycles. The driving voltage, current, emission spectra and optical power (V-I-P) operation characteristics exhibited no significant changes after the space environmental tests. The DUV LEDs will be used for photoelectric charge management in space flights. For custom designed AlGaN UV photodiodes with a central response wavelength of 255 nm, we have demonstrated its extreme radiation hardness using a 65 MeV proton beam line. The solar-blind AlGaN photodiodes retained ~50% responsivity up to 3x1012 protons/cm2 fluence. The Stanford-NSTec-SETI team will continue to develop radiation hard optoelectronic devices for applications under extreme conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Chemistry of CO 2 Capture in an Amine-Functionalized Metal–Organic Framework under Dry and Humid Conditions

In this paper, the use of two primary alkylamine functionalities covalently tethered to the linkers of IRMOF-74-III results in a material that can uptake CO 2 at low pressures through a chemisorption mechanism. In contrast to other primary amine-functionalized solid adsorbents that uptake CO 2 primarily as ammonium carbamates, we observe using solid state NMR that the major chemisorption product for this material is carbamic acid. Finally, the equilibrium of reaction products also shifts to ammonium carbamate when water vapor is present; a new finding that has impact on control of the chemistry of CO 2 capture in MOF materials and one that highlights the importance of geometric constraints and the mediating role of water within the pores of MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-order Shifted Interface Method for Lagrangian shock hydrodynamics

Here, we present a new method for two-material Lagrangian hydrodynamics, which combines the Shifted Interface Method (SIM) with a high-order Finite Element Method. Our approach relies on an exact (or sharp) material interface representation, that is, it uses the precise location of the material interface. The interface is represented by the zero level-set of a continuous high-order finite element function that moves with the material velocity. This strategy allows to evolve curved material interfaces inside curved elements. By reformulating the original interface problem over a surrogate (approximate) interface, located in proximity of the true interface, the SIM avoids cut cells and the associated problematic issues regarding implementation, numerical stability, and matrix conditioning. Accuracy is maintained by modifying the original interface conditions using Taylor expansions. We demonstrate the performance of the proposed algorithms on established numerical benchmarks in one, two and three dimensions.

97 MATHEMATICS AND COMPUTING↗

Opportunities for iron and steel industrial wastewater treatment and reuse in the United States

Concerns around water security in the United States have heightened the interest in industrial water treatment and reuse to improve water efficiency and operational reliability. Alongside nationwide efforts to expand industrial capacity, primary manufacturing sectors are adopting more resource-efficient technologies. This transition is expected to shift industrial water consumption patterns, driving the need for improved treatment and reuse practices. This study investigates opportunities for water use, treatment, and reuse in the iron and steel sector through a review of academic and industry literature and interviews with industry representatives. It identifies key challenges in water and wastewater management and outlines the conditions under which innovative treatment technologies could be deployed. Based on these insights, the study presents a practical water management action plan. Furthermore, it assesses water quality targets across different process operations, evaluates existing treatment technologies, and highlights challenges and opportunities for improvement relative to future performance expectations. Although water is often perceived as a low-cost commodity, industry feedback suggests that improvements in water use and treatment efficiency are typically prioritized only when they also reduce energy use, carbon emissions, or costs. This study advocates for a direct two-way partnership between industry and research audiences to bring their attention toward sustainable industrial water use, treatment, and reuse.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Role of Arctic Sea Ice in the 2014–2015 Eurasian Warm Winter

Abstract Because of large internal variabilities, the role of Arctic sea ice concentration (SIC) on regional climate cannot be easily separated. This study uses two groups of large ensemble atmospheric model simulations under climatological and observed SIC boundary conditions to investigate the role of SIC in the 2014–2015 December to February Eurasian warm winter (DJF15). It is shown that the SIC has large impact on the probability distribution function of the DJF15 temperature and pressure fields. The anomalous high Barents Sea ice during the 2014–2015 autumn and winter leads to significant shift in the probability distribution function skewness of the DJF15 surface temperature (from −0.13 to −0.48) and the related sea level pressure (from −0.18 to 0.32) that favor more occurrences of warm temperature anomaly and positive North Atlantic Oscillation‐like pattern. This asymmetry is consistent with anomalous forcing in phase with the anomalies of the sea level pressure field.

Xie, Jinbo↗

Effects of nitrogen plasma treatment on the electrical property and band structure of few-layer MoS{sub 2}

Few-layer MoS{sub 2} prepared by the chemical vapor deposition method was treated with nitrogen plasma under different radio-frequency (rf) power conditions in order to experimentally study the change in the electrical property. Control of the rf power could change the work function of MoS{sub 2} from 5.40 eV to 5.06 eV. It is shown that the increased rf power leads to the increased (reduced) number of nitrogen (oxygen) atoms, increasing the electron concentration and shifting the Fermi level toward conduction band. The sensitivity of the work function to the rf power provides an opportunity to tune the work function of MoS{sub 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Attainment of a stable, fully detached plasma state in innovative divertor configurations

A computational study of long-legged tokamak divertor configurations is performed with the edge transport code UEDGE. Several divertor configurations are considered, with radially or vertically extended, tightly baffled, outer divertor legs and with or without a secondary X-point in the divertor leg volume. For otherwise identical conditions, a scan of the input power from the core plasma is performed. As the power is reduced to a threshold value, the plasma in the outer leg transitions to a fully detached state, which defines the upper limit on the power for detached divertor operation. Reducing the power further results in the detachment front shifting upstream but remains stable. At low power, the detachment front eventually moves all the way to the primary X-point, which is usually associated with degradation of the core plasma, and this defines the lower limit on the power for the detached divertor operation. For the studied parameters, for long-legged divertors, the detached operation window is quite large, in particular, for the X-point target configuration using a secondary X-point in the divertor leg volume, allowing a factor of 5–10 variations in the input power. For the same parameters, for the standard divertor configuration, the detached operation window is very small or even non-existent. In conclusion, the present modeling results suggest the possibility of stable fully detached divertor operation for a tokamak with tightly baffled extended divertor legs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The motional Stark effect diagnostic for ITER

An overview of the plans for the motional Stark effect (MSE) diagnostic installation on the International Thermonuclear Experimental Reactor (ITER) is presented. The MSE diagnostic uniquely provides spatially localized magnetic field measurements inside the plasma. These are used to constrain equilibrium reconstructions to determine q(r), the safety factor as a function of minor radius. Meeting the system requirements to deliver q-profiles and related quantities with the specified radial resolution of 20 points over the minor radius, 10 ms time resolution, and better than 10% accuracy is challenging. MSE systems observe the D/H-α emission near 656.3 nm from neutral beams. As the beam atoms traverse the magnetic field, B⃗, at high velocity, v⃗, they experience a Lorentz electric field, v⃗×B⃗, which causes the spectral emission to be split and polarized due to the Stark effect. Traditional MSE-LP (line polarization) measurements determine the direction of the magnetic field in the observation volume using polarimetric analysis of the detected light. The harsh conditions of ITER are expected to deposit thin films of contaminants on the first mirror, which would alter the polarization state of reflected light significantly. On ITER, the combination of high magnetic field strength and high energy beams makes the Stark spectrum resolution suitable for the determination of the magnetic field magnitude from the line shift, so this approach has been selected. Every aspect of the measurement system must be planned for the burning plasma environment and carefully analyzed ahead of time. Current status and plans for the system are presented.

Instruments & Instrumentation↗

Bulk viscosity of nuclear matter with pions in the neutrino-trapped regime

Recent work has shown that a population of thermal pions could modify the equation of state and transport properties of hot and dense neutron-rich matter and introduce new reaction pathways to change the proton fraction. In this article we study their impact on the bulk viscosity of dense matter, focusing on the neutrino-trapped regime that would be realized in neutron star mergers and supernovae. We find that the presence of a thermal population of pions alters the bulk viscosity by modifying the EoS (via the susceptibilities) and by providing new reaction pathways to achieve beta equilibrium. In neutron star merger conditions, the bulk viscosity in neutrino-trapped npeμ matter (without pions) has its peak at temperatures of at most a couple MeV and is quite small at temperatures of tens of MeV. We find that thermal pions enhance the low-temperature peak of the bulk viscosity by a factor of a few and shift it to slightly lower temperatures. At higher temperatures, where the pion abundance is large but the bulk viscosity is traditionally small, pions can increase the bulk viscosity by an order of magnitude or more, although it is still orders of magnitude smaller than its peak value.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reduction of Carbon Footprint and Energy Efficiency Improvement in Aluminum Production by Use of Novel Wireless Instrumentation Integrated with Mathematical Modeling

The work addressed the greenhouse gas emission and electrical energy consumption of the aluminum industry. The objective was to provide a means for reducing both through the application of wireless instrumentation, coupled to mathematical modeling. Worldwide the aluminum industry consumes more electrical energy than all activities in many major countries (e.g. the UK) and emits more greenhouse gasses (e.g. than France). Most of these excesses are in the 'primary production' of aluminum; that is the conversion of aluminum oxide to metal in large electrolytic cells operating at hundreds of thousands of amps. An industry-specific GHG emission has been the focus of the work. The electrolytic cells periodically, but at irregular intervals, experience an upset condition known as an 'anode effect'. During such anode effects the cells emit fluorinated hydrocarbons (PFCs, which have a high global warming potential) at a rate far greater than in normal operation. Therefore curbing anode effects will reduce GHG emissions. Prior work had indicated that the distribution of electrical current within the cell experiences significant shifts in the minutes before an anode effect. The thrust of the present work was to develop technology that could detect and report this early warning of an anode effect so that the control computer could minimize GHG emissions. A system was developed to achieve this goal and, in collaboration with Alcoa, was tested on two cells at an Alcoa plant in Malaga, Washington. The project has also pointed to the possibility of additional improvements that could result from the work. Notable among these is an improvement in efficiency that could result in an increase in cell output at little extra operating cost. Prospects for commercialization have emerged in the form of purchase orders for further installations. The work has demonstrated that a system for monitoring the current of individual anodes in an aluminum cell is practical. Furthermore the system has been installed twice on a smelter in the US without exposing workers to hazards usually associated with running signal wires in aluminum plants. The results display the early warning of an anode effect that potentially can be used to minimize such anode effects with their excessive GHG emissions. They also point to a possible, but substantial, economic benefit that could result in improved current efficiency by anode adjustment based on individual anode current measurements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Myosin Head Configurations in Resting and Contracting Murine Skeletal Muscle

Transgenic mouse models have been important tools for studying the relationship of genotype to phenotype for human diseases, including those of skeletal muscle. We show that mouse skeletal muscle can produce high quality X-ray diffraction patterns establishing the mouse intact skeletal muscle X-ray preparation as a potentially powerful tool to test structural hypotheses in health and disease. A notable feature of the mouse model system is the presence of residual myosin layer line intensities in contracting mouse muscle patterns. This provides an additional tool, along with the I1,1/I1,0 intensity ratio, for estimating the proportions of active versus relaxed myosin heads under a given set of conditions that can be used to characterize a given physiological condition or mutant muscle type. We also show that analysis of the myosin layer line intensity distribution, including derivation of the myosin head radius, Rm, may be used to study the role of the super-relaxed state in myosin regulation. When the myosin inhibitor blebbistatin is used to inhibit force production, there is a shift towards a highly quasi-helically ordered configuration that is distinct from the normal resting state, indicating there are more than one helically ordered configuration for resting crossbridges.

Ma, Weikang↗

chapter 40 - Gasification Technologies, "Handbook of Climate Change Mitigation and Adaptation"

Gasification is an enabling technology for the clean-up of fossil and biomass fuels for energy production. A history of gasifier development is told from the perspective of a technology evolving to meet the ever changing market needs. The chemistry and physics of coal conversion includes pyrolysis, combustion, gasification, mineral transformations as well as a discussion of the materials developed to meet the most challenging gasifier applications. Integrated gasification and combined cycle processes are discussed with respect to electrical power production. The distinguishing features for different types of gasifiers are described including fixed bed, fluidized bed, entrained flow, transport gasifiers. The twelve major gasifiers being marketed today are described. The hydrodynamics and kinetics of each are reviewed along with salient differences in performance, such as gas composition, when using a variety of fuels under different conditions. Critical operational features that are discussed include oxidizing media, air or oxygen blown; the system pressure; fuel feed stock; and downstream clean-up. Thermal integration is discussed with respect to its impact on the gasifier performance. Gas clean-up is also considered with respect to the removal of potential pollutants and the shifting to environmentally benign transportation and process fuels.

01 COAL, LIGNITE, AND PEAT↗

Dynamics and quantum Zeno effect for a qubit in either a low- or high-frequency bath beyond the rotating-wave approximation

We use a non-Markovian approach to study the decoherence dynamics of a qubit in either a low- or high-frequency bath modeling the qubit environment. This is done for two separate cases: either with measurements or without them. This approach is based on a unitary transformation and does not require the rotating-wave approximation. In the case without measurement, we show that, for low-frequency noise, the bath shifts the qubit energy toward higher energies (blue shift), while the ordinary high-frequency cutoff Ohmic bath shifts the qubit energy toward lower energies (red shift). In order to preserve the coherence of the qubit, we also investigate the dynamics of the qubit subject to measurements (quantum Zeno regime) in two cases: low- and high-frequency baths. For very frequent projective measurements, the low-frequency bath gives rise to the quantum anti-Zeno effect on the qubit. The quantum Zeno effect only occurs in the high-frequency-cutoff Ohmic bath, after counterrotating terms are considered. In the condition that the decay rate due to the two kinds of baths are equal under the Wigner-Weisskopf approximation, we find that without the approximation, for a high-frequency environment, the decay rate should be faster (without measurements) or slower (with frequent measurements, in the Zeno regime), compared to the low-frequency bath case. The experimental implementation of our results here could distinguish the type of bath (either a low- or high-frequency one) and protect the coherence of the qubit by modulating the dominant frequency of its environment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure formation in the Deser-Woodard nonlocal gravity model: a reappraisal

In this work, we extend previous analyses of the structure formation in the f (□{sup −1} R ) model of nonlocal gravity proposed by Deser and Woodard (DW), which reproduces the background expansion of ΛCDM with no need of a cosmological constant nor of any dimensional constant beside Newton's one. A previous analysis based on redshift-space distortions (RSD) data concluded that the model was ruled out. In this work we revisit the issue and find that, when recast in a localized model, the DW model is not ruled out and actually gives a better fit to RSD data than ΛCDM. In fact, the DW model presents a suppressed growth of matter perturbations with respect to ΛCDM and a slightly lower value of σ{sub 8}, as favored by observations. We also produce analytical approximations of the two modified gravity functions, i.e. the anisotropic stress η and the relative change of Newton's constant Y , and of f σ{sub 8}( z ) as a function of redshift. Finally, we also show how much the fit depends on initial conditions when these are generalized with respect to a standard matter-dominated era.

79 ASTRONOMY AND ASTROPHYSICS↗

SUPER-CRITICAL GROWTH OF MASSIVE BLACK HOLES FROM STELLAR-MASS SEEDS

We consider super-critical accretion with angular momentum onto stellar-mass black holes as a possible mechanism for growing billion-solar-mass black holes from light seeds at early times. We use the radiatively inefficient ''slim disk'' solution—advective, optically thick flows that generalize the standard geometrically thin disk model—to show how mildly super-Eddington intermittent accretion may significantly ease the problem of assembling the first massive black holes when the universe was less than 0.8 Gyr old. Because of the low radiative efficiencies of slim disks around non-rotating as well as rapidly rotating black holes, the mass e-folding timescale in this regime is nearly independent of the spin parameter. The conditions that may lead to super-critical growth in the early universe are briefly discussed.

79 ASTRONOMY AND ASTROPHYSICS↗