SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The purpose of these top level EVA tenets for Artemis III is to capture and promote EVA planning principles which drive decisions before and during the mission that are related to mission timeline, contingencies, and how risks are balanced. The tenets listed below are not shown in a priority order. (Reference Artemis III Mission Planning Summit, Action 27, 3/9/2023).
Since NASA’s selection of an L2 9:2 lunar synodic resonant Near Rectilinear Halo Orbit (NRHO) as the baseline for the Gateway Program, the agency has worked to mature its understanding of this orbit and its use for the Artemis III, IV, and V missions. In parallel with these efforts, NASA has investigated alternative staging orbits to perform the Artemis III lunar surface landing mission and compared those options to the baseline NRHO. This paper evaluates a number of alternative orbits on their feasibility and favorability and compares them to the agency baseline NRHO.
The purpose of this presentation is to give external Artemis III Teams (payloads, industry) some basic information on EVA Operations and hardware impacts in the design, the planning, and the real-time phases of the mission.
NASA has committed to sending humans to the Moon no earlier than 2025. The Artemis III mission will include scientific, technology demonstrations, commercial, inspirational, and explorational objectives. Achieving these goals will depend upon balancing priorities and mission constraints. A landing location needs to meet terrain conditions suitable for the lander with acceptable thermal and lighting conditions. This location must also allow access to geological areas of interest within traverse range and capability of walking astronauts. A representative EVA timeline is then developed for an example location on the de Gerlache-Shackleton ridge and used to examine the location’s acceptability as a candidate site for Artemis III. Similar studies are being conducted to NASA’s Science Mission Directorate and Flight Operations.
The purpose of this presentation is to give the newly selected Artemis III Science Team some basic information on EVA Operations and potential interactions with the science team in both the planning and real-time phases of the mission.
To maintain Crew Health and Performance (CHP) during an Artemis mission, the NASA Human Research Program (HRP) and Exploration Medical Capabilities (ExMC) element recognize the challenge that many different vehicles, habitats, and operational groups must come together to develop and implement cross program capabilities. To address this challenge, the ExMC team created the prototype 2023 Artemis CHP System Model to analyze how human system requirements are implemented throughout an Artemis mission and help understand the effects of changing an individual vehicle or habitat requirement on a full mission. Since presenting this work at the 2024 HRP Investigators’ Workshop, ExMC has continued this effort, now called the Artemis III and IV CHP System Model, to better support its operational end users within the NASA Human Health and Performance Directorate (HHPD) workforce. In this presentation, we will recapitulate how visualizing requirements and their relationships using a Model-Based Systems Engineering approach (MBSE) serves to improve understanding of an Artemis mission’s CHP capabilities along with discussion on updates made to the model to increase accessibility for users within HHPD so that it may be used in the development of cross program CHP capabilities at NASA.
The Lunar Environment Monitoring Station (LEMS) is an autonomous, survive-the-lunar-night seismic suite to be deployed on the Lunar surface by the Artemis III crew and designed to operate continuously for two years. It will see the extremes of the Lunar south pole thermal environment where surface temperatures range from -200°C to +20°C and where nighttime duration is at least 354 hours. Given power and mass constraints, the thermal system is limited to 2.5 Watts of heat during the lunar night. The electrical harnessing named the Signal and Power Passthrough (SAPP) was designed to minimize heat loss while meeting power and signal integrity requirements. To mitigate risk due to uncertainty associated with the harnessing materials, routing, and tie-downs, a flight-like thermal conductance test was performed to measure the heat loss. The test methodology, results, and model correlation are presented.
The Lunar Environment Monitoring Station (LEMS) is an autonomous, survive-the-lunar-night seismic suite to be deployed on the Lunar surface by the Artemis III crew and designed to operate continuously for two years. It will see the extremes of the Lunar south pole thermal environment where surface temperatures range from -200°C to +20°C and where nighttime duration is at least 354 hours. Given power and mass constraints, the thermal system is limited to 2.5 Watts of heat during the lunar night. The electrical harnessing named the Signal and Power Passthrough (SAPP) was designed to minimize heat loss while meeting power and signal integrity requirements. To mitigate risk due to uncertainty associated with the harnessing materials, routing, and tie-downs, a flight-like thermal conductance test was performed to measure the heat loss. The test methodology, results, and model correlation are presented.
The Lunar Environment Monitoring Station (LEMS) is an autonomous, survive-the-lunar-night seismic suite to be deployed on the Lunar surface by the Artemis III crew and designed to operate continuously for two years. It will see the extremes of the Lunar south pole thermal environment where surface temperatures range from -200°C to +20°C and where nighttime duration is at least 354 hours. Given power and mass constraints, the thermal system is limited to 2.5 Watts of heat during the lunar night. The electrical harnessing named the Signal and Power Passthrough (SAPP) was designed to minimize heat loss while meeting power and signal integrity requirements. To mitigate risk due to uncertainty associated with the harnessing materials, routing, and tie-downs, a flight-like thermal conductance test was performed to measure the heat loss. The test methodology, results, and model correlation are presented.
The Lunar Environment Monitoring Station (LEMS) is an autonomous, survive-the lunar-night seismic suite to be deployed on the Lunar surface by the Artemis III crew and designed to operate continuously for two years. It will see the extremes of the Lunar south pole thermal environment where surface temperatures range from -200°C to +20°C and where nighttime duration is at least 354 hours. Given power and mass constraints, the thermal system is limited to 2.5 Watts of heat during the lunar night. Presented is the system thermal vacuum test plan and configuration to validate the thermal control system performance in a flight-like environment. The test will measure the nighttime heat leaks for the bus and 18 seismometers to ensure lunar night survival and operability.
The Lunar Environment Monitoring Station (LEMS) is an autonomous, survive-the lunar-night seismic suite to be deployed on the Lunar surface by the Artemis III crew and designed to operate continuously for two years. It will see the extremes of the Lunar south pole thermal environment where surface temperatures range from -200°C to +20°C and where nighttime duration is at least 354 hours. Given power and mass constraints, the thermal system is limited to 2.5 Watts of heat during the lunar night. Presented is the system thermal vacuum test plan and configuration to validate the thermal control system performance in a flight-like environment. The test will measure the nighttime heat leaks for the bus and 18 seismometers to ensure lunar night survival and operability.
The Lunar Environment Monitoring Station (LEMS) is an autonomous, survive-the lunar-night seismic suite to be deployed on the Lunar surface by the Artemis III crew and designed to operate continuously for two years. It will see the extremes of the Lunar south pole thermal environment where surface temperatures range from -200°C to +20°C and where nighttime duration is at least 354 hours. Given power and mass constraints, the thermal system is limited to 2.5 Watts of heat during the lunar night. Presented is the system thermal vacuum test plan and configuration to validate the thermal control system performance in a flight-like environment. The test will measure the nighttime heat leaks for the bus and 18 seismometers to ensure lunar night survival and operability.
Explore the source record for details and available documents.
The Artemis Science Plan identified that the infrastructure and resources associated during a human/robotic exploration mission can be used to conduct fundamental lunar science needed to mitigate the risks of human exploration of surface systems (i.e. Mars and the Moon). In particular, studying the response of life to the combination of fractional gravity and deep space radiation of the Moon is needed to mitigate the HEOMD risks to the crew that result from inadequate diets. Essential nutrients and vitamins available to astronauts have been shown to degrade within the stored food system during long duration missions. Other risks to exploration missions were isolation and confinement, distance from the Earth, radiation and partial gravity.
This paper highlights lunar neutron science that can be performed in support of the Artemis 2024 mission within 6 degrees of the lunar south pole. There are two primary science goals: the characterization of the radiation environment, and secondly, inference of regolith composition including the presence of water. Characterizing the surface radiation environment is important for risk identification and mitigation during crewed lunar missions. The lunar surface radiation environment includes a unique neutron contribution. The relative contribution from neutrons is higher outside the shielding effects of Earth’s magnetic field, which the Moon experiences ~25% of its orbit. To evaluate the radiation risk to astronauts at the lunar surface, fast neutron measurements are needed. Neutrons are generated when galactic cosmic rays (GCR) collide with the lunar regolith and provide valuable elemental composition information about the near surface (< 1m). For the characterization of regolith composition, a low energy neutron spectrometer or counter can determine surface composition. This provides ground truth for orbital neutron data from the Lunar Reconnaissance Orbiter and Lunar Prospector missions.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
We outline the use of Drosophila in space-research by leveraging the current information and an autonomous hardware to further our knowledge of molecular responses to space, aiding in countermeasure and biomarker development for deep-space habitation.