Search NASA⌕ Search

SEARCH · Search NASA

Results for “Barrier properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Photocured epoxy/graphene nanocomposites with enhanced water vapor barrier properties

A transparent, water vapor barrier film made of an epoxy resin and graphene oxide (GO) was synthesized by photopolymerization process. The epoxy/GO film with just 0.05 wt% GO gives a 93% WVTR reduction with respect to the pristine polymer, reaching barrier properties better than other polymer composites containing higher amounts of graphene. The excellent water vapor barrier is attributed to the good dispersion of GO in the polymer matrix. Moreover, GO significantly enhances the toughness and the damping capacity of the epoxy resins. The hybrid film can have potential applications in anticorrosive coatings, electronic devices, pharmaceuticals and food packaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amorphous alumina thin films deposited on titanium: Interfacial chemistry and thermal oxidation barrier properties

Ti/Al 2 O 3 bilayer stacks are used as model systems to investigate the role of atomic layer deposition (ALD) and chemical vapor deposition (CVD) to prepare 30-180 nm thick amorphous alumina films as protective barriers for the medium temperature oxidation (500-600⁰C) of titanium, which is employed in aeronautic applications. X-ray diffraction (XRD), transmission electron microscopy (TEM) with selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS) results show that the films produced from the direct liquid injection (DLI) CVD of aluminum tri-isopropoxide (ATI) are poor oxygen barriers. The films processed using the ALD of trimethylaluminum (TMA) show good barrier properties but an extensive intermixing with Ti which subsequently oxidizes. In contrast, the films prepared from dimethyl aluminum isopropoxide (DMAI) by CVD are excellent oxygen barriers and show little intermixing with Ti. Overall, these measurements correlate the effect of the alumina coating thickness, morphology, and stoichiometry resulting from the preparation method to the oxidation barrier properties, and show that compact and stoichiometric amorphous alumina films offer superior barrier properties.

36 MATERIALS SCIENCE↗

Large-scale fabrication of linear low density polyethylene/layered double hydroxides composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties

Novel LDH intercalated with organic aliphatic long-chain anion was large-scale synthesized innovatively by high-energy ball milling in one pot. The linear low density polyethylene (LLDPE)/layered double hydroxides (LDH) composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties were fabricated by melt blending and blowing process. FT IR, XRD, SEM results show that LDH particles were dispersed uniformly in the LLDPE composite films. Particularly, LLDPE composite film with 1% LDH exhibited the optimal performance among all the composite films with a 60.36% enhancement in the water vapor barrier property and a 45.73 °C increase in the temperature of maximum mass loss rate compared with pure LLDPE film. Furthermore, the improved infrared absorbance (1180–914 cm{sup −1}) of LLDPE/LDH films revealed the significant enhancement of heat retention. Therefore, this study prompts the application of LLDPE/LDH films as agricultural films with superior heat retention. - Graphical abstract: The fabrication process of LLDPE/LDH composite films. - Highlights: • LDH with basal spacing of 4.07 nm was synthesized by high-energy ball milling. • LLDPE composite films with homogeneous LDH dispersion were fabricated. • The properties of LLDPE/LDH composite films were improved. • LLDPE/LDH composite films show superior heat retention property.

36 MATERIALS SCIENCE↗

Copolyesters developed from bio‐based 2,5‐furandicarboxylic acid: Synthesis, sequence distribution, mechanical, and barrier properties of poly(propylene‐ co ‐1,4‐cyclohexanedimethylene 2,5‐furandicarboxylate)s

ABSTRACT A series of poly(propylene‐ co ‐1,4‐cyclohexanedimethylene 2,5‐furandicarboxylate)s (PPCFs) with different compositions were synthesized from bio‐based aromatic monomer 2,5‐furandicarboxylic acid and 1,3‐propanediol (PDO), along with 1,4‐cyclohexanedimethylene (CHDM). The chemical structure, composition, and sequence distribution of PPCFs were determined by nuclear magnetic resonance ( 1 H NMR and 13 C NMR). Results showed that the compositions of copolyesters depended on the feed molar ratio of PDO and CHDM, and all the obtained PPCFs copolyesters had triad component in a random sequential structure. With the addition of CHDM, the gas barrier properties of poly(propylene 2,5‐furandicarboxylate) (PPF) deteriorated. However, when the content of CHDM reached 79%, PPCF79 still showed the CO 2 and O 2 barrier improvement factor of 4.5 and 3.25, respectively, which were better than those of poly(ethylene naphthalate), a well‐known polymer with barrier property. Besides, PPCF79 showed good performance on tensile modulus, tensile strength, elongation at break, and the crystallization enthalpy was improved from 3.2 J g −1 for PPF to 30.7 J g −1 for PPCF79. It has the potential to serve as a promising bio‐based polymer with excellent comprehensive performance. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 47291.

Jia, Zhen↗

Diffusion barrier properties of amorphous and nanocrystalline Ta films for Cu interconnects

In the present paper, the diffusion barrier properties of amorphous and nanocrystalline (NC) Ta films, and the interface microstructure of Ta/Cu were investigated as a function of annealing temperature. X-ray diffraction, scanning electron microscopy, cross-sectional transmission electron microscopy, and energy-dispersive spectrometer line scans were employed to study the microstructure evolution and diffusion behavior. It was found that an amorphous layer with a thickness of approx5 nm formed at the interface of NC Ta/Cu at 450 deg. C annealing, while the interface of amorphous-Ta/Cu was still abrupt. Moreover, amorphous-Ta film acts as an effective diffusion barrier up to temperatures of 650 deg. C, which is higher than that for NC-Ta film. The fast diffusion along grain boundaries inside NC-Ta films is suggested to be responsible for the main failure of NC-Ta film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improvement in mechanical and barrier properties of polyethylene blown films using atomic layer deposition

Recently, thin films deposited on polymer substrates have been widely utilized as encapsulation barriers in electronic applications such as flexible displays, packaging films, and organic light-emitting diodes. The barrier and mechanical properties of these films are critical aspects when using them for protecting the inner modules of electronic devices from environmental factors such as moisture, oxygen, and sunlight. In particular, polymers can be degraded or decomposed more easily than other materials under such environmental conditions. Therefore, polymer films can be deposited using thin functional materials; however, suitable deposition methods for polymers are scarce owing to many limitations such as low melting/glass transition temperature, thermal degradation, and oxidation. In this study, a thin alumina oxide film was deposited on a high-density polyethylene blown film by using atomic layer deposition. The mechanical and barrier properties of the alumina oxide film deposited on the polyethylene film were characterized by a microtensile test and water vapor transmission rate test. Process conditions such as process temperature, plasma surface treatment, and number of cycles were varied to ascertain the reliability of the thin alumina oxide film deposited on the high-density polyethylene blown film. The results showed that the barrier property of the deposited film improved upon the application of plasma surface treatment, and that its mechanical properties varied under different process conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Long-term stable water vapor permeation barrier properties of SiN/SiCN/SiN nanolaminated multilayers grown by plasma-enhanced chemical vapor deposition at extremely low pressures

We investigated the water vapor permeation barrier properties of 30-nm-thick SiN/SiCN/SiN nanolaminated multilayer structures grown by plasma enhanced chemical vapor deposition at 7 mTorr. The derived water vapor transmission rate was 1.12 × 10{sup −6} g/(m{sup 2} day) at 85 °C and 85% relative humidity, and this value was maintained up to 15 000 h of aging time. The X-ray diffraction patterns revealed that the nanolaminated film was composed of an amorphous phase. A mixed phase was observed upon performing high resolution transmission electron microscope analysis, which indicated that a thermodynamically stable structure was formed. It was revealed amorphous SiN/SiCN/SiN multilayer structures that are free from intermixed interface defects effectively block water vapor permeation into active layer.

36 MATERIALS SCIENCE↗

Morphology and water-barrier properties of silane films on aluminum and silicon

The goal of this study is to understand the effect of the substrate on the morphology and water-barrier properties of bis-silane films. Silane films are deposited on both Si and Al. Neutron reflectivity is used to assess the effect of hydrothermal conditioning on the films. Aluminum on silicon (no silane) was characterized first to facilitate understanding of the more complicated silane on Al-coated Si. A 200-{angstrom} Al layer with 55-{angstrom} oxide covers the surface of the silicon wafer. The reflectivity data show that water penetrates into the oxide layer. Silane films deposited on either Al or Si substrates have similar bulk and top-surface morphology. Studies of silanes on Si wafers, therefore, can be generalized to include Al. The substrate-silane interface, however, does depend on both the substrate and the silane. Because pH of the bis-sulfur silane solution is outside of the stability range for Al{sub 2}O{sub 3}, dissolution of the thin oxide film occurs during solution deposition. A water-depletion area is formed at the interface region due to this reaction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improving the barrier properties of tin oxide in metal halide perovskite solar cells using ozone to enhance nucleation

Here we investigate tin oxide growth on fullerene (C 60 ) by atomic layer deposition (ALD) for C 60 /oxide bilayer electron selective contacts in P-I-N metal halide perovskite (MHP) solar cells. An in situ ozone functionalization step is incorporated in an ALD SnO x process to suppress sub-surface growth, leading to improved internal barrier performance of ALD SnO x thin films grown on fullerene surfaces. We show that this approach decreases the water-vapor transmission rate of C 60 /ALD SnO x barriers by an order of magnitude and improves the barrier properties against gas, solvent, and halide migration. Furthermore, ozone-treated SnO x barriers can narrow photovoltaic performance distribution without compromising efficiency. We demonstrate the universality of this approach in wide-, intermediate-, and low-gap perovskite systems and further show that enhancement of the ALD barrier layer is critical toward improving the yield of all-perovskite tandem solar cells. Two-terminal all-perovskite tandem solar cells incorporating ozone nucleation are reported at over 24% photovoltaic conversion efficiency.

14 SOLAR ENERGY↗

Barrier properties of PE, PP and EVA (nano)composites - The influence of filler type and concentration

Nanocomposite materials with layered clay used as nanofiller and polyethylene (PE), polypropylene (PP) and copolymer ethylene and vinyl acetate matrix (EVA, the content of VA component 19 wt. %) were prepared by compounding the individual components in Brabender kneader. The MMT Na+ and four types of commercial products such as Nanofil N 5 and N3000, Cloisite 93A and 30B were used as nanofillers. Next to the clays microprecipitated CaHCO{sub 3}, nanosilica and Halloysite tubes were used. The quantity of all the above-mentioned (nano)fillers was 1, 3 and 5 wt. % in relation to the content of montmorillonite. The aim was to evaluate the influence of (nano)filler type and concentration on nanocomposite barrier properties. The morphology of nanocomposite samples was examined by means of XRD analysis illustrated by transmission electronic microscopy TEM. Furthermore, permeability for O{sub 2} and CO{sub 2} were observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improvement of barrier properties of rotomolded PE containers with nanoclay

Polyethylene (PE) is widely used to make bulk containers in rotational molding process. The challenge in this study is to improve permeation resistance of PE to hydrocarbon solvents and gases. Adding organomodified clay improves the thermal, barrier and mechanical properties of PE. In fact, clay layers create a tortuous path against the permeant, yielding better barrier properties. Due to the non-polar hydrophobic nature of PE and polar hydrophilic structure of clay minerals, the compatibilizer plays a crucial role to enhance the dispersion level of clay in the matrix. In this study High Density Polyethylene (HDPE) and Linear Low Density Polyethylene (LLDPE) layered silicate nanocomposite were melt-compounded with two concentrations of organomodified clay (2 and 4 wt. %). The interaction between nanoclay, compatibilizer and rotomolding grade of PE were examined by using X-ray diffraction, transmission electron microscopy (TEM) and rheology test. Rheology was used to determine the performance of our material at low shear processing condition.

36 MATERIALS SCIENCE↗

The liquid state of FG-nucleoporins mimics permeability barrier properties of nuclear pore complexes

Nuclear pore complexes (NPCs) regulate all cargo traffic across the nuclear envelope. The transport conduit of NPCs is highly enriched in disordered phenylalanine/glycine-rich nucleoporins (FG-Nups), which form a permeability barrier of still elusive and highly debated molecular structure. Here we present a microfluidic device that triggered liquid-to-liquid phase separation of FG-Nups, which yielded droplets that showed typical properties of a liquid state. On the microfluidic chip, droplets were perfused with different transport-competent or -incompetent cargo complexes, and then the permeability barrier properties of the droplets were optically interrogated. We show that the liquid state mimics permeability barrier properties of the physiological nuclear transport pathway in intact NPCs in cells: that is, inert cargoes ranging from small proteins to large capsids were excluded from liquid FG-Nup droplets, but functional import complexes underwent facilitated import into droplets. Collectively, these data provide an experimental model of how NPCs can facilitate fast passage of cargoes across an order of magnitude in cargo size.

59 BASIC BIOLOGICAL SCIENCES↗

Enhancing Electrophoretic Display Lifetime: Thiol-Polybutadiene Evaporation Barrier Property Response to Network Microstructure

An evaporation barrier is required to enhance the lifetime of electrophoretic deposition (EPD) displays. As EPD functions on the basis of reversible deposition and resuspension of colloids suspended in a solvent, evaporation of the solvent ultimately leads to device failure. Incorporation of a thiol-polybutadiene elastomer into EPD displays enabled display lifetime surpassing six months in counting and catalyzed rigid display transition into a flexible package. Final flexible display transition to mass production compels an electronic-ink approach to encapsulate display suspension within an elastomer shell. Final thiol-polybutadiene photosensitive resin network microstructure was idealized to be dense, homogeneous, and expose an elastic response to deformation. Research at hand details an approach to understanding microstructural change within display elastomers. Polybutadiene-based resin properties are modified via polymer chain structure, with and without added aromatic urethane methacrylate difunctionality, and in measuring network response to variation in thiol and initiator concentration. Dynamic mechanical analysis results signify that cross-linked segments within a difunctionalized polybutadiene network were on average eight times more elastically active than that of linked segments within a non-functionalized polybutadiene network. Difunctionalized polybutadiene samples also showed a 2.5 times greater maximum elastic modulus than non-functionalized samples. Hybrid polymer composed of both polybutadiene chains encompassed TE-2000 stiffness and B-1000 elasticity for use in encapsulating display suspension. Later experiments measured kinetic and rheological response due to alteration in dithiol cross-linker chain length via real time Fourier transform infrared spectroscopy and real-time dynamic rheology. Distinct differences were discovered between dithiol resin systems, as maximum thiol conversion achieved in short and long chain length dithiols was 86% and 11%, respectively. Oscillatory real-time rheological experiments confirmed a more uniform network to better dissipate applied shear in short chain length dithiol systems, as long chain length dithiols relayed a steep internal stress build-up due to less cross-links and chain entanglements. Thorough understanding of network formation aids the production of a stronger and impermeable elastomeric barrier for preservation of EPD displays.

36 MATERIALS SCIENCE↗

On the Counter‐intuitive Heterogeneous Electron Transfer Barrier Properties of Alkanethiolate Monolayers on Gold: Smooth versus Rough Surfaces

Abstract Alkanethiolate monolayers formed on rough gold surfaces can, somewhat surprisingly, act as stronger barriers to heterogeneous electron transfer than those on smooth gold surfaces. This paper presents a possible explanation for this observation by constructing simple geometric models of a “rough” and “smooth” gold surface to examine how microscopic roughness differences can affect the nucleation/growth of the adlayer and size/density of structural defects. Expectedly, the number of defects predicted for adlayers formed on smooth gold is lower than any of those for rough gold. The counter‐intuitive result is that the sizes of a small portion of the defects in the adlayer on the smooth surface are larger than any of those found on the rough surface. The potential implications of these results are discussed.

Chemistry↗

Diffusion Barrier Properties of Nitride-Based Coatings on Fuel Cladding

In this work titanium nitride (TiN) and zirconium nitride (ZrN) coatings are proposed as diffusion barriers between stainless steel nuclear fuel cladding and lanthanide fission products. TiN and ZrN have been coated as barrier materials between pure Fe and Ce, i.e. diffusion couples of Fe/TiN/Ce and Fe/ZrN/Ce, annealed up to a temperature of 600 degrees C, and compared to the diffusion behavior of uncoated Fe/Ce. Backscattered electron images and electron dispersive X-ray spectroscopy measurements confirm that, with a 500 nm TiN or ZrN layer, no obvious diffusion is observed between Fe and Ce. Basic diffusion characteristics of the Fe/Ce couple have also been measured and compared with the TiN and ZrN coated ones. The results strongly advocate that TiN and ZrN coatings provide reliable diffusion barrier characteristics against Ce and possibly other lanthanide fission products.

36 MATERIALS SCIENCE↗

Nacre-inspired hemicelluloses paper with fire retardant and gas barrier properties by self-assembly with bentonite nanosheets

A need for fabricating robust hemicelluloses composites has been continuously gaining ground so as to replace petroleum-derived materials with renewable resources. Here, a new galactomannan with high molecular weight was extracted from endosperms of Sesbania cannabina which could improve the formation of arabinoxylan film. Inspired by the excellent mechanical properties and hierarchical structure of natural nacre, these naturally extracted arabinoxylan and galactomannan were further self-assembled with bentonite nanosheets, generating a ternary paper with multilayered structure. These hemicelluloses-bentonite papers exhibited the highest tensile strength of 80.87 MPa, 2.39 times that of the hemicelluloses paper without bentonite, which was achieved by the crosslinking reactions between hemicelluloses and bentonite nanosheets. Our study further reflected that these papers possess superior gas barrier, water-resistant and fire-retardant properties with the addition of small amount of bentonite nanosheet, which holds the potential for use as fire-protective insulations, coatings, packaging, and aerospace materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical Conductivity and Barrier Properties of Lithium Niobate Thin Films

The thin-film structures made of LiNbO{sub 3} and obtained via laser ablation and magnetron sputtering are studied with volt-farad and volt-ampere characteristics. A potential barrier on the Si–LiNbO{sub 3} interface was found for both types of the films with the capacitance-voltage characteristics. The current-voltage characteristics showed that there are several conduction mechanisms in the structures studied. The Poole–Frenkel effect and the currents limited by a space charge mainly contribute to the electrical conductivity in the LiNbO{sub 3} film produced with the laser ablation method. The currents limited by a space charge contribute to the main mechanism in the film heterostructure obtained with the magnetron sputtering method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrostatic pressure incubation affects barrier properties of mammary epithelial cell monolayers, in vitro

Highlights: • A modified Ussing chamber was used to apply physiological pressure on HC11 cells. • Pressure was applied to simulate accumulation of milk in the mammary gland. • Dependence of differentiation state and transcellular transport was observed. • Effects on barrier function were attributed to tight junction protein expression. During lactation, accumulation of milk in mammary glands (MG) causes hydrostatic pressure (HP) and concentration of bioactive compounds. Previously, a changed expression of tight junction (TJ) proteins was observed in mice MGs by accumulation of milk, in vivo. The TJ primarily determines the integrity of the MG epithelium. The present study questioned whether HP alone can affect the TJ in a mammary epithelial cell model, in vitro. Therefore, monolayers of HC11, a mammary epithelial cell line, were mounted into modified Ussing chambers and incubated with 10 kPa bilateral HP for 4 h. Short circuit current and transepithelial resistance were recorded and compared to controls, and TJ proteins were analyzed by Western blotting and immunofluorescent staining. In our first approach HC11 cells could withstand the pressure incubation and a downregulation of occludin was observed. In a second approach, using prolactin- and dexamethasone-induced cells, a decrease of short circuit current was observed, beginning after 2 h of incubation. With the addition of 1 mM barium chloride to the bathing solution the decrease could be blocked temporarily. On molecular level an upregulation of ZO-1 could be observed in hormone-induced cells, which was downregulated after the incubation with barium chloride. In conclusion, bilateral HP incubation affects mammary epithelial monolayers, in vitro. Both, the reduction of short circuit current and the change in TJ proteins may be interpreted as physiological requirements for lactation.

60 APPLIED LIFE SCIENCES↗