Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fe3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Epitaxial Fe3-xTixO4 films from magnetite to ulvöspinel by pulsed laser deposition

Epitaxial films along the Fe3-xTixO4 (titanomagnetite) compositional series from pure end-members magnetite (Fe3O4) to ulvöspinel (Fe2TiO4) were successfully grown by pulsed laser deposition on MgO(100) substrates. Spectroscopic characterization including high resolution x-ray diffraction, x-ray photoelectron spectroscopy, and synchrotron-based x-ray absorption and magnetic circular dichroism consistently shows that Ti(IV) substitutes for Fe(III) in the inverse spinel lattice with a proportional increase in lattice Fe(II) concentration. No evidence of Ti interstitials, spinodal decomposition, or secondary phases was found in the bulk of the grown films. At the uppermost few nanometers of the Ti-bearing film surfaces, evidence suggests that Fe(II) is susceptible to facile oxidation, and that an associated lower Fe/Ti ratio in this region is consistent with surface compositional incompleteness or alteration to a titanomaghemite-like composition and structure. The surface of these films nonetheless appear to remain highly ordered and commensurate with the underlying structure despite facile oxidation, a surface condition that is found to be reversible to some extent by heating in low oxygen environments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Materials Data on Fe3(CuS5)2 by Materials Project

Fe3(CuS5)2 is pyrite-derived structured and crystallizes in the triclinic P1 space group. The structure is three-dimensional. there are twelve inequivalent Fe3+ sites. In the first Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.22–2.31 Å. In the second Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.22–2.31 Å. In the third Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.26–2.33 Å. In the fourth Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.22–2.30 Å. In the fifth Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with four CuS6 octahedra and corners with eight FeS6 octahedra. The corner-sharing octahedra tilt angles range from 60–67°. There are a spread of Fe–S bond distances ranging from 2.26–2.34 Å. In the sixth Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 61–68°. There are a spread of Fe–S bond distances ranging from 2.22–2.31 Å. In the seventh Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.25–2.35 Å. In the eighth Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.25–2.35 Å. In the ninth Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with four CuS6 octahedra and corners with eight FeS6 octahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.26–2.33 Å. In the tenth Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with four FeS6 octahedra, corners with eight CuS6 octahedra, and corners with two SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are two shorter (2.25 Å) and four longer (2.28 Å) Fe–S bond lengths. In the eleventh Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with six FeS6 octahedra, corners with six CuS6 octahedra, and a cornercorner with one SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.26–2.33 Å. In the twelfth Fe3+ site, Fe3+ is bonded to six S+1.20- atoms to form FeS6 octahedra that share corners with four FeS6 octahedra, corners with eight CuS6 octahedra, and a cornercorner with one SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 60–68°. There are a spread of Fe–S bond distances ranging from 2.22–2.32 Å. There are eight inequivalent Cu+1.50+ sites. In the first Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with two equivalent CuS6 octahedra, corners with ten FeS6 octahedra, and a cornercorner with one SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 64–68°. There are a spread of Cu–S bond distances ranging from 2.38–2.47 Å. In the second Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with two equivalent CuS6 octahedra, corners with ten FeS6 octahedra, and corners with two SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 64–69°. There are a spread of Cu–S bond distances ranging from 2.39–2.48 Å. In the third Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with four equivalent CuS6 octahedra, corners with eight FeS6 octahedra, and corners with four SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 64–70°. There are a spread of Cu–S bond distances ranging from 2.39–2.48 Å. In the fourth Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with four CuS6 octahedra, corners with eight FeS6 octahedra, and corners with four SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 64–69°. There are four shorter (2.39 Å) and two longer (2.46 Å) Cu–S bond lengths. In the fifth Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with two equivalent CuS6 octahedra, corners with ten FeS6 octahedra, and corners with two SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 64–69°. There are a spread of Cu–S bond distances ranging from 2.37–2.47 Å. In the sixth Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with two equivalent CuS6 octahedra, corners with ten FeS6 octahedra, and corners with two SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 63–69°. There are a spread of Cu–S bond distances ranging from 2.36–2.47 Å. In the seventh Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with four CuS6 octahedra, corners with eight FeS6 octahedra, and corners with three SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 63–69°. There are a spread of Cu–S bond distances ranging from 2.38–2.48 Å. In the eighth Cu+1.50+ site, Cu+1.50+ is bonded to six S+1.20- atoms to form CuS6 octahedra that share corners with four equivalent CuS6 octahedra, corners with eight FeS6 octahedra, and corners with four SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 63–70°. There are four shorter (2.39 Å) and two longer (2.46 Å) Cu–S bond lengths. There are forty inequivalent S+1.20- sites. In the first S+1.20- site, S+1.20- is bonded in a 3-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.20 Å. In the second S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.15 Å. In the third S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.17 Å. In the fourth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.20 Å. In the fifth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.14 Å. In the sixth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to three Fe3+ and one S+1.20- atom. The S–S bond length is 2.20 Å. In the seventh S+1.20- site, S+1.20- is bonded to one Fe3+, two Cu+1.50+, and one S+1.20- atom to form distorted SFeCu2S tetrahedra that share a cornercorner with one FeS6 octahedra, corners with two CuS6 octahedra, and corners with six SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 69–80°. The S–S bond length is 2.09 Å. In the eighth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.14 Å. In the ninth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.16 Å. In the tenth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.11 Å. In the eleventh S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to three Fe3+ and one S+1.20- atom. The S–S bond length is 2.19 Å. In the twelfth S+1.20- site, S+1.20- is bonded to two Fe3+, one Cu+1.50+, and one S+1.20- atom to form distorted SFe2CuS tetrahedra that share a cornercorner with one FeS6 octahedra, corners with two CuS6 octahedra, and corners with two SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 72–81°. The S–S bond length is 2.11 Å. In the thirteenth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to one Fe3+, two Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.10 Å. In the fourteenth S+1.20- site, S+1.20- is bonded to one Fe3+, two Cu+1.50+, and one S+1.20- atom to form distorted SFeCu2S tetrahedra that share a cornercorner with one FeS6 octahedra, corners with two CuS6 octahedra, and corners with three SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 70–79°. The S–S bond length is 2.07 Å. In the fifteenth S+1.20- site, S+1.20- is bonded to one Fe3+, two Cu+1.50+, and one S+1.20- atom to form distorted SFeCu2S tetrahedra that share a cornercorner with one FeS6 octahedra, corners with two CuS6 octahedra, and corners with seven SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 69–80°. The S–S bond length is 2.08 Å. In the sixteenth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.16 Å. In the seventeenth S+1.20- site, S+1.20- is bonded to two Fe3+, one Cu+1.50+, and one S+1.20- atom to form distorted SFe2CuS tetrahedra that share a cornercorner with one FeS6 octahedra, corners with two CuS6 octahedra, and a cornercorner with one SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 72–81°. The S–S bond length is 2.11 Å. In the eighteenth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.15 Å. In the nineteenth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to one Fe3+, two Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.12 Å. In the twentieth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to one Fe3+, two Cu+1.50+, and one S+1.20- atom. The S–S bond length is 2.09 Å. In the twenty-first S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. In the twenty-second S+1.20- site, S+1.20- is bonded to one Fe3+, two Cu+1.50+, and one S+1.20- atom to form distorted SFeCu2S tetrahedra that share a cornercorner with one FeS6 octahedra, corners with two CuS6 octahedra, and corners with three SFeCu2S tetrahedra. The corner-sharing octahedra tilt angles range from 70–79°. In the twenty-third S+1.20- site, S+1.20- is bonded to two Fe3+, one Cu+1.50+, and one S+1.20- atom to form distorted SFe2CuS tetrahedra that share a cornercorner with one FeS6 octahedra, corners with two CuS6 octahedra, and corners with two SFe2CuS tetrahedra. The corner-sharing octahedra tilt angles range from 72–82°. In the twenty-fourth S+1.20- site, S+1.20- is bonded in a 4-coordinate geometry to two Fe3+, one Cu+1.50+, and one S+1.20- atom. In the tw

36 MATERIALS SCIENCE↗

Materials Data on Fe3(AsO4)2 by Materials Project

Fe3(AsO4)2 crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of two Fe3(AsO4)2 sheets oriented in the (0, 1, 0) direction. there are two inequivalent Fe3+ sites. In the first Fe3+ site, Fe3+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are two shorter (1.98 Å) and two longer (2.13 Å) Fe–O bond lengths. In the second Fe3+ site, Fe3+ is bonded in a linear geometry to two equivalent O2- atoms. Both Fe–O bond lengths are 1.86 Å. As+3.50+ is bonded in a tetrahedral geometry to four O2- atoms. There is three shorter (1.72 Å) and one longer (1.75 Å) As–O bond length. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 120 degrees geometry to one Fe3+ and one As+3.50+ atom. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to one Fe3+ and one As+3.50+ atom. In the third O2- site, O2- is bonded in a 3-coordinate geometry to two equivalent Fe3+ and one As+3.50+ atom.

36 MATERIALS SCIENCE↗

Studies on the Fe3+ Doping Effect on Structural, Optical and Catalytic Properties of Hydrothermally Synthesized TiO2 Photocatalyst

Pure TiO2 and Fe3+-TiO2 nanoparticles have been prepared by simple hydrothermal method with different Fe3+ concentrations. The synthesized nanoparticles are analysed to determine its structural, optical, morphological and compositional properties using X-ray diffraction, Raman, UV-DRS, photoluminescence, Mossbauer, XPS, TEM and SEM/EDS. The EDS micrograph confirms the existence of Fe3+ atoms in the TiO2 matrix with 0.85, 1.52 and 1.87 weight percent. The crystallite size and band gap decrease with increase in Fe3+concentration. The average particle size obtained from TEM is 7-11 nm which is in good agreement with XRD results. Raman bands at 640 cm-1, 517 cm-1 and 398 cm-1 further confirm pure phase anatase in all samples. XPS shows the proper substitutions of few sites of Ti4+ ions by Fe3+ ions in the TiO2 host lattice. The intensity of PL spectra for Fe3+-TiO2 shows a gradual decrease in the peak intensity with increasing Fe3+ concentration in TiO2, and it indicates lower recombination rate as Fe3+ ions increases. These nanoparticles are further studied for its photocatalytic activities using malachite green dye under UV light, visible light and sunlight.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Distribution of Fe3+ and H in Minerals During Partial Melting and Metasomatism of Spinel Peridotite

Oxygen fugacity and water content are crucial parameters for many chemical and physical properties of the Earth's mantle, for example bearing on fluid type, melting initiation, and deformation. However, the exact behaviour of Fe3+ and H during melting and metasomatism is still under debate. Here, the Fe3+/ΣFe ratio (Mössbauer and EMP) and water content (FTIR) of peridotite minerals are examined in mantle xenoliths from Kilbourne Hole (KH), NM, and Dish Hill (DH), CA (USA). These spinel peridotites have compositions consistent with partial melting with variable degrees of metasomatism (undetectable to cryptic to modal). Pyroxenites also allow to examine melt-rock reactions. Bulk-rock Fe2O3 content of the KH peridotites correlates with indices of melting (positive with bulk-rock Al2O3 and Cpx Yb contents, and negative with spinel Cr#) confirming that Fe3+ behaves as an incompatible element during melting. Correlations of the Fe3+/ΣFe ratio of minerals with these indices, however, indicates that Fe3+ is incompatible in Cpx but compatible in Opx and spinel during melting. Water contents in olivine, Cpx and Opx from most KH peridotites can be explained by partial melting and correlate negatively with the Fe3+/ΣFe ratio of spinel and Opx but positively with that of Cpx. This indicates partial control of Fe3+ on the incorporation of H in pyroxene, but not related to a redox equilibrium in Cpx. The higher Fe3+/ΣFe ratio of spinel in the metasomatized KH and DH peridotites, and in the pyroxenites confirms that oxidation characterizes modal metasomatism. Metasomatism, however, is not necessarily accompanied by water addition.

Peslier, A. H.↗

Catalytic valorization of hardwood for enhanced xylose-hydrolysate recovery and cellulose enzymatic efficiency via synergistic effect of Fe3+ and acetic acid

Background: Poplars are considered suitable dedicated energy crops, with abundant cellulose and hemicellulose, and huge surplus biomass potential in China. Xylan, the major hemicellulosic component, contributes to the structural stability of wood and represents a tremendous quantity of biobased chemicals for fuel production. Monomeric xylose conversion to value-added chemicals such as furfural, xylitol, and xylonic acid could greatly improve the economics of pulp-paper industry and biorefinery. Acetic acid (HAc) is used as a friendly and recyclable selective catalyst amenable to xylan degradation and xylooligosaccharides production from lignocellulosic materials. However, HAc catalyst usually works much feebly at inert woods than agricultural straws. In this study, effects of different iron species in HAc media on poplar xylan degradation were systematically compared, and a preferable Fe3+-assisted HAc hydrolysis process was proposed for comparable xylose-hydrolysate recovery (XHR) and enzymatic saccharifcation of cellulose. Results: In presence of 6.5% HAc with 0.17–0.25 wt% Fe3+, xylose yield ranged between 72.5 and 73.9%. Additionally, pretreatment was effective in poplar delignification, with a lignin yield falling between 38.6 and 42.5%. Under similar conditions, saccharifcation efficiency varied between 60.3 and 65.9%. Starting with 100 g poplar biomass, a total amount of 12.7–12.8 g of xylose and 18.8–22.8 g of glucose were harvested from liquid streams during the whole process of Fe3+-HAc hydrolysis coupled with enzymatic saccharification. Furthermore, the enhancement mechanism of Fe3+ coupled with HAc was investigated after proof-of-concept experiments. Beechwood xylan and xylose were treated under the same condition as poplar sawdust fractionation, giving understanding of the effect of catalysts on the hydrolysis pathway from wood xylan to xylose and furfural by Fe3+-HAc. Conclusions: The Fe3+-assisted HAc hydrolysis process was demonstrated as an effective approach to the wood xylose and other monosaccharides production. Synergistic effect of Lewis acid site and aqueous acetic acid provided a promising strategy for catalytic valorization of poplar biomass.

09 BIOMASS FUELS↗

Colorimetric Chemosensor for Cu2+ and Fe3+ Based on a meso-Triphenylamine-BODIPY Derivative

Optical chemosensors are a practical tool for the detection and quantification of important analytes in biological and environmental fields, such as Cu2+ and Fe3+. To the best of our knowledge, a BODIPY derivative capable of detecting Cu2+ and Fe3+ simultaneously through a colorimetric response has not yet been described in the literature. In this work, a meso-triphenylamine-BODIPY derivative is reported for the highly selective detection of Cu2+ and Fe3+. In the preliminary chemosensing study, this compound showed a significant color change from yellow to blue–green in the presence of Cu2+ and Fe3+. With only one equivalent of cation, a change in the absorption band of the compound and the appearance of a new band around 700 nm were observed. Furthermore, only 10 equivalents of Cu2+/Fe3+ were needed to reach the absorption plateau in the UV-visible titrations. Compound 1 showed excellent sensitivity toward Cu2+ and Fe3+ detection, with LODs of 0.63 µM and 1.06 µM, respectively. The binding constant calculation indicated a strong complexation between compound 1 and Cu2+/Fe3+ ions. The 1H and 19F NMR titrations showed that an increasing concentration of cations induced a broadening and shifting of the aromatic region peaks, as well as the disappearance of the original fluorine peaks of the BODIPY core, which suggests that the ligand–metal (1:2) interaction may occur through the triphenylamino group and the BODIPY core.

Pinto, Sónia C. S.↗

Experimental calibration of an Fe3+/Fe2+-in-amphibole oxybarometer and its application to shallow magmatic processes at Shiveluch Volcano, Kamchatka

Abstract Oxygen fugacity is an important but difficult parameter to constrain for primitive arc magmas. In this study, the partitioning behavior of Fe3+/Fe2+ between amphibole and glass synthesized in piston-cylinder and cold-seal apparatus experiments is developed as an oxybarometer, applicable to magmas ranging from basaltic to dacitic composition. The partitioning of Fe2+ is strongly dependent on melt polymerization; the relative compatibility of Fe2+ in amphibole decreases with increasing polymerization. The Fe2+/Mg distribution coefficient between amphibole and melt is a relatively constant value across all compositions and is, on average, 0.27. The amphibole oxybarometer is applied to amphibole in mafic enclaves, cumulates, and basaltic tephra erupted from Shiveluch volcano in Kamchatka with measured Fe3+/FeTotal. An average Fe3+/Fe2+ amphibole-glass distribution coefficient for basalt is used to convert the Fe3+/FeTotal of amphibole in samples from Shiveluch to magmatic oxygen fugacity relative to NNO. The fO2 of primitive melts at the volcano is approximately NNO+2 and is faithfully recorded in amphibole from an amphibole-rich cumulate and the basaltic tephra. Apparently, higher fO2 recorded by amphibole in mafic enclaves likely results from partial dehydrogenation of amphibole during residence in a shallow andesite storage region. We identify three pulses of mafic magma recharge within two weeks of, a month before, and two to three months before the eruption and find that, at each of these times, the host andesite was recharged by at least two magmas at varying stages of differentiation. Application of the amphibole oxybarometer not only gives insight into magmatic fO2 but also potentially details of shallow magmatic processes.

Geochemistry & Geophysics↗

Materials Data on Fe3(PO8)2 by Materials Project

Fe3(PO7)2O2 crystallizes in the triclinic P-1 space group. The structure is three-dimensional and consists of two hydrogen peroxide molecules and one Fe3(PO7)2 framework. In the Fe3(PO7)2 framework, there are three inequivalent Fe sites. In the first Fe site, Fe is bonded to four O atoms to form distorted FeO4 tetrahedra that share corners with two PO4 tetrahedra. There are a spread of Fe–O bond distances ranging from 1.86–1.94 Å. In the second Fe site, Fe is bonded in a 6-coordinate geometry to six O atoms. There are a spread of Fe–O bond distances ranging from 1.91–2.35 Å. In the third Fe site, Fe is bonded in a 6-coordinate geometry to six O atoms. There are a spread of Fe–O bond distances ranging from 1.92–2.27 Å. There are two inequivalent P sites. In the first P site, P is bonded to four O atoms to form PO4 tetrahedra that share a cornercorner with one FeO4 tetrahedra. There are a spread of P–O bond distances ranging from 1.54–1.56 Å. In the second P site, P is bonded to four O atoms to form PO4 tetrahedra that share a cornercorner with one FeO4 tetrahedra. There are a spread of P–O bond distances ranging from 1.53–1.56 Å. There are fourteen inequivalent O sites. In the first O site, O is bonded in a distorted water-like geometry to one Fe and one O atom. The O–O bond length is 1.35 Å. In the second O site, O is bonded in a distorted bent 120 degrees geometry to one Fe and one O atom. In the third O site, O is bonded in a distorted L-shaped geometry to one Fe and one O atom. The O–O bond length is 1.33 Å. In the fourth O site, O is bonded in an L-shaped geometry to one Fe and one O atom. The O–O bond length is 1.32 Å. In the fifth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the sixth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the seventh O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the eighth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the ninth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the tenth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the eleventh O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the twelfth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the thirteenth O site, O is bonded in a 1-coordinate geometry to two Fe and one O atom. In the fourteenth O site, O is bonded in a 3-coordinate geometry to two Fe and one O atom.

36 MATERIALS SCIENCE↗

Electron Spin Resonance Study of Fe3+ and Mn2+ Ions in 17-Year-Old Nuclear-Waste-Glass Simulants Containing PuO2 with Different Degrees of 238Pu Substitution

Three samples of a model nuclear waste glass, DRG-P1, P2, and P3, were prepared at PNNL in 1982 with identical chemical compositions but were respectively batched with 0.0, 0.1, and 0.9 wt% of 238PuO2 (half life 87.8 years) partially replacing the 1.0 wt% 239PuO2 present in DRG-P1. In 1999, samples of these glasses were sent to the Naval Research Laboratory for electron spin resonance (ESR) measurements. No radiation-induced point defects were observed. Profound alpha decay-induced changes in the ESR spectra of the batched iron-group ions were found. The spectra recorded for DRG-P1 were shown by absolute spin counts to have ESR intensities equivalent to ~85% of the sum of the batched 8.28 mole% Fe3+ and 2.79 mole% Mn2+, assuming all of those ions to behave as paramagnetic S=5/2 states at room temperature. Separate experiments and calculations ruled out the possibility of precipitated magnetite-like precipitates comprising even so much as 0.01% of the total iron. A relatively weak ESR spectral feature observed at g=4.3 is the known signature of dilute Fe3+ in glasses. However, the strongest ESR signal was found to be characterized by a first-derivative zero crossing at g=2.06 and a peak-to-peak derivative linewidth of ~150 mT, which is virtually invariant in shape with both measurement temperature and alpha-decay dose. It was discovered that these broad line shapes could be accurately simulated as weighted sums of Lorentzian shape functions of differing widths but having the same g value. The absence of any measurable anisotropy in the broad line, coupled with the temperature invariance of its width, imply the existence of extremely strong exchange interactions within clusters of Fe3+, Fe2+, Mn2+, and Ni2+ ions characterized by extremely short-range magnetic order. The result is a speromagnetic system rather than exhibiting a distinct Néel temperature. The most evident ESR effect of 17 years of 238Pu decay is the (irreversible) lowering of the intensity of the "broad line" in rough proportion to the amount of 238Pu in the sample, with concomitant increases in the amplitude of the g=4.3 feature. It was additionally observed that cooling these glasses to successively lower temperatures gives rise to reversible lowering of the broad-line intensity and increasing of the strength of the g=4.3 feature when compared with theoretical expectation for non-interacting paramagnets. The truly remarkable observation that the broad lines could be simulated as weighted sums of pure Lorentzian functions of differing widths fortuitously opened the way for high precision measurements of the ESR intensities of experimental spectra that are far broader than the magnetic field range of the available laboratory electromagnets. The areas under the simulated absorption curves fitted to the experimental spectra in the manner described provided an empirical measure of the degrees to which the present model nuclear waste glasses had been affected by alpha-decay self irradiation. Specifically, the broad-line ESR integrated-intensity data as a function of 238Pu alphadecay dose (proportional to the 238Pu doping level in these fixed-time experiments) proved to be accurately fitted by a simple saturating exponential function asymptotic to zero for infinite-time self irradiation. This result promises a precise means of extrapolating thousands of years into the future the process of "super-vitrification" that results from the creation and rapid quenching of thermal spikes due to alpha decay in glasses immobilizing 239Pu and other actinide elements. In addition, because the ESR spectra of several very different candidate high-level nuclear waste (HLW) glass compositions containing even higher amounts of Fe2O3 are also shown here to be decomposable into sums of pure Lorentzians, the analytical method we describe should be applicable to these and many other HLW glasses containing both iron-group oxides and radionuclides.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Aqueous Ca2+ System, in Comparison with Zn2+, Fe3+, and Al3+: An Ab Initio Molecular Dynamics Study

Results of Ab Initio Molecular Dynamics (AIMD) simulations of a Ca2+ ion in an aqueous environment (64 waters, 38ps=5ps equilibration + 33ps data collection, 300K) are reported. The 1st hydration shell contains 6-7 waters with d(OH) = 0.97Å (identical to our bulk water estimate) and average tilt angle, I = 32º. The 1st maximum in the radial distribution function occurs at GCaO(r) = 2.45Å. Our results compare well with published experimental structural data from X-Ray Absorption (XAFS) and Neutron Diffraction. We also generate simulated XAFS spectra using a 1st principles MD-XAFS procedure and show quantitative agreement with experimental XAFS data from a 0.2m Ca(ClO4)2 aqueous solution. The Ca2+ 1st shell water dipole moment of 3.1D is identical to our bulk water estimate (3.1D). The structured 2nd hydration shell, composed of ~16.5 waters, has a maximum at GCaO(r) =4.6Å. The average 2nd shell dipole moment = 2.9D, is suppressed relative to bulk water values. Detailed H-bond analysis demonstrates the waters in this shell predominately coordinate 1st shell waters with a trigonally structured H-bond network. Two exchanges between the 1st hydration shell and the bulk were observed. These were consistent with a dissociative and dissociative interchange Eigen-Wilkins ligand exchange mechanism. Many transfers between the 2nd shell and bulk are detected for Ca2+ allowing an estimation of the 2nd shell mean residence time (MRT) of 4.6ps. Comparison of the Ca2+ hydration shell structure and dynamics with those of the recently reported Zn2+, Fe3+ and Al3+ cation species show that the 1st and 2nd hydration shell parameters, d(M-OI) distance, CNII, H-bond d(OI-OII) distance and %Tetrahedral structure are correlated with cation charge density, the ratio of cation charge (Z) and size (Rion). However, important exceptions are d(M-OII) and the 2nd shell Mean Residence Time (MRT). These differences are explained in terms of the 1st shell structure parameters (d(M-OI) distance and tilt angle I which are strongly influenced by the valence electronic structure of the Ca2+, Zn2+, Fe3+, and Al3+ cation species. The average 2nd shell dipole moment for all cations are found to be suppressed relative to bulk water.

Ab Initio Molecular Dynamics↗

Materials Data on Fe3(PO4)4 by Materials Project

Fe3(PO4)4 crystallizes in the triclinic P-1 space group. The structure is two-dimensional and consists of one Fe3(PO4)4 sheet oriented in the (0, 1, 0) direction. there are four inequivalent Fe sites. In the first Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with four FeO6 octahedra and corners with six PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 58–59°. There are a spread of Fe–O bond distances ranging from 1.93–2.11 Å. In the second Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with two FeO6 octahedra, corners with four PO4 tetrahedra, and an edgeedge with one PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 58–59°. There are a spread of Fe–O bond distances ranging from 1.96–2.15 Å. In the third Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with two FeO6 octahedra, corners with four PO4 tetrahedra, and an edgeedge with one PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 57–59°. There are a spread of Fe–O bond distances ranging from 1.97–2.15 Å. In the fourth Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with four FeO6 octahedra and corners with six PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 57–59°. There are a spread of Fe–O bond distances ranging from 1.93–2.11 Å. There are four inequivalent P sites. In the first P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with four FeO6 octahedra and an edgeedge with one FeO6 octahedra. The corner-sharing octahedra tilt angles range from 36–52°. There is two shorter (1.52 Å) and two longer (1.60 Å) P–O bond length. In the second P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with four FeO6 octahedra and an edgeedge with one FeO6 octahedra. The corner-sharing octahedra tilt angles range from 36–53°. There are a spread of P–O bond distances ranging from 1.52–1.60 Å. In the third P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with three FeO6 octahedra. The corner-sharing octahedra tilt angles range from 45–51°. There are a spread of P–O bond distances ranging from 1.53–1.55 Å. In the fourth P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with three FeO6 octahedra. The corner-sharing octahedra tilt angles range from 45–51°. There is three shorter (1.54 Å) and one longer (1.55 Å) P–O bond length. There are sixteen inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to one P atom. In the second O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the third O site, O is bonded in a distorted bent 150 degrees geometry to one Fe and one P atom. In the fourth O site, O is bonded in a single-bond geometry to one P atom. In the fifth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the sixth O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the seventh O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the eighth O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the ninth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the tenth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the eleventh O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the twelfth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the thirteenth O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the fourteenth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the fifteenth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the sixteenth O site, O is bonded in a distorted bent 150 degrees geometry to one Fe and one P atom.

36 MATERIALS SCIENCE↗

Materials Data on Fe3(AsO4)4 by Materials Project

Fe3(AsO4)4 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of one Fe3(AsO4)4 sheet oriented in the (-1, 0, 2) direction. there are two inequivalent Fe sites. In the first Fe site, Fe is bonded to five O atoms to form distorted FeO5 trigonal bipyramids that share corners with two equivalent FeO6 octahedra and corners with five AsO4 tetrahedra. The corner-sharing octahedra tilt angles range from 42–66°. There are a spread of Fe–O bond distances ranging from 1.90–2.11 Å. In the second Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with two equivalent AsO4 tetrahedra, corners with four equivalent FeO5 trigonal bipyramids, and edges with two equivalent AsO4 tetrahedra. There are a spread of Fe–O bond distances ranging from 1.95–2.17 Å. There are two inequivalent As sites. In the first As site, As is bonded to four O atoms to form AsO4 tetrahedra that share corners with three equivalent FeO5 trigonal bipyramids. There are a spread of As–O bond distances ranging from 1.71–1.74 Å. In the second As site, As is bonded to four O atoms to form AsO4 tetrahedra that share a cornercorner with one FeO6 octahedra, corners with two equivalent FeO5 trigonal bipyramids, and an edgeedge with one FeO6 octahedra. The corner-sharing octahedral tilt angles are 48°. There are a spread of As–O bond distances ranging from 1.69–1.79 Å. There are eight inequivalent O sites. In the first O site, O is bonded in a bent 120 degrees geometry to one Fe and one As atom. In the second O site, O is bonded in a distorted trigonal non-coplanar geometry to two Fe and one As atom. In the third O site, O is bonded in a single-bond geometry to one As atom. In the fourth O site, O is bonded in a distorted bent 120 degrees geometry to one Fe and one As atom. In the fifth O site, O is bonded in a bent 120 degrees geometry to one Fe and one As atom. In the sixth O site, O is bonded in a single-bond geometry to one As atom. In the seventh O site, O is bonded in a distorted trigonal non-coplanar geometry to two Fe and one As atom. In the eighth O site, O is bonded in a bent 120 degrees geometry to one Fe and one As atom.

36 MATERIALS SCIENCE↗

Materials Data on Fe3(PO4)4 by Materials Project

Fe3(PO4)4 crystallizes in the triclinic P-1 space group. The structure is two-dimensional and consists of one Fe3(PO4)4 sheet oriented in the (0, 1, 0) direction. there are four inequivalent Fe sites. In the first Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with four FeO6 octahedra and corners with six PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 57–59°. There are a spread of Fe–O bond distances ranging from 1.93–2.13 Å. In the second Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with two FeO6 octahedra, corners with four PO4 tetrahedra, and an edgeedge with one PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 57–59°. There are a spread of Fe–O bond distances ranging from 1.97–2.12 Å. In the third Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with two FeO6 octahedra, corners with four PO4 tetrahedra, and an edgeedge with one PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 56–59°. There are a spread of Fe–O bond distances ranging from 1.97–2.14 Å. In the fourth Fe site, Fe is bonded to six O atoms to form FeO6 octahedra that share corners with four FeO6 octahedra and corners with six PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 56–59°. There are a spread of Fe–O bond distances ranging from 1.93–2.14 Å. There are four inequivalent P sites. In the first P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with four FeO6 octahedra and an edgeedge with one FeO6 octahedra. The corner-sharing octahedra tilt angles range from 35–52°. There is two shorter (1.52 Å) and two longer (1.60 Å) P–O bond length. In the second P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with four FeO6 octahedra and an edgeedge with one FeO6 octahedra. The corner-sharing octahedra tilt angles range from 37–53°. There is two shorter (1.52 Å) and two longer (1.60 Å) P–O bond length. In the third P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with three FeO6 octahedra. The corner-sharing octahedra tilt angles range from 47–50°. There is two shorter (1.54 Å) and two longer (1.55 Å) P–O bond length. In the fourth P site, P is bonded to four O atoms to form PO4 tetrahedra that share corners with three FeO6 octahedra. The corner-sharing octahedra tilt angles range from 47–50°. There is three shorter (1.54 Å) and one longer (1.55 Å) P–O bond length. There are sixteen inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to one P atom. In the second O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the third O site, O is bonded in a distorted bent 120 degrees geometry to one Fe and one P atom. In the fourth O site, O is bonded in a single-bond geometry to one P atom. In the fifth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the sixth O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the seventh O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the eighth O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the ninth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the tenth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the eleventh O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the twelfth O site, O is bonded in a bent 120 degrees geometry to one Fe and one P atom. In the thirteenth O site, O is bonded in a distorted trigonal planar geometry to two Fe and one P atom. In the fourteenth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the fifteenth O site, O is bonded in a bent 150 degrees geometry to one Fe and one P atom. In the sixteenth O site, O is bonded in a distorted bent 120 degrees geometry to one Fe and one P atom.

36 MATERIALS SCIENCE↗