Results for “High Temperature Reactor designs”

DOE OSTI2021

SAM Co-Development to Support Fluoride-salt-cooled High-temperature Reactor Design and Licensing (CRADA 2018-18177 Final Report)

This project aims to raise the SAM code's technical and commercial maturity level to enable the Kairos Power ("Kairos") to use SAM to support its KP-FHR design analysis and licensing application. Argonne National Laboratory ("Argonne") has actively developed and maintained SAM, a modern system-level analysis tool for advanced nonlight water reactors safety analysis. Kairos is currently actively pursuing development of an FHR design and associated technology, and consequently requires a pedigreed safety analysis tool. The purpose of this project is to increase the maturity of the SAM code for the modeling and simulation of the KP-FHR design, thus enabling its use in safety analyses that support licensing application. Argonne will primarily be responsible for software design, development, and testing; while Kairos will be responsible for software requirements, assessment of software capabilities, needs, gaps, and priorities, and development of proprietary models. The research and development activities for the joint SAM development project include: a series of identification and prioritization studies on design characteristics, event sequences, relevant phenomena, and software capabilities; SAM capability enhancements for specific KP-FHR systems and components; performing code verification and validations; integrating uncertainty quantification (UQ), model calibration, and sensitivity analysis (SA) techniques in safety analyses; and raising the software quality rigor level for commercial-grade applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Graphite waste classification and disposal cost estimation for high temperature gas and salt reactors

As high-temperature reactor designs progress to demonstration, managing the radioactive wastes from these systems presents unique challenges. This work explores the irradiated graphite source term produced by three reactor designs: The Modular High Temperature Gas reactor (MHTGR), a pebble-bed High Temperature Gas Reactor (pb-HTGR), and a Fluoride-cooled High-temperature Reactor (FHR). We predicted a C-14 concentration of 4.3 Ci/m 3 for the MHTGR, 1.2 Ci/m 3 for the pebble bed HTGR, and 2.5 Ci/m 3 for the gFHR after 20 years of operation. The final C-14 concentration highly depended on the graphite nitrogen impurity, a major precursor for C-14. The C-14 concentration in all reactor types exceeded the 0.8 Ci/m3 threshold, resulting in a Class C waste classification. The costs associated with accepting the graphite after 20 years in a low-level waste disposal facility were projected to be 255 dollars per kWe for the MHTGR, 248 dollars per kWe for the pb-HTGR, and 56.8 dollars per kWe for the FHR.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

Design of a Combined Proportional Integral Derivative Controller to Regulate the Temperature Inside a High-Temperature Tubular Solar Reactor

Solar fuels are proven to be promising candidates for thermochemical energy storage. However, the transient nature of solar radiation is an obstacle to maintaining a stable operational temperature inside a solar reactor. To overcome this challenge, the temperature of a solar reactor can be regulated by controlling the incoming solar radiation or the feedstock flowrate inside the reactor. In this work, a combined proportional integral derivative (PID) controller is implemented to regulate the temperature inside a high-temperature tubular solar reactor with counter-current flowing gas/particles. The control model incorporates two control systems to regulate incoming solar radiation and gas flow simultaneously. The design of the controller is based on a reduced-order numerical model of a high-temperature tubular solar reactor that is vertically oriented with an upward gas flow and downward particle flow. The reactor receives heat circumferentially through its wall over a finite segment of its length. Formulation of the heat transfer model is presented by applying the energy balance for the reactor tube and considering heat and mass transfer inside. A set of governing differential equations are solved numerically by using the finite volume method to obtain reactor wall, particles, and gas temperatures along the reactor length with various boundary conditions. Simulation results are used to tune the PID controller parameters by utilizing the Ziegler–Nichols tuning method. Both the simulation results and the controller performance are visualized on the LABVIEW platform. The controller is challenged to track different temperature setpoints with different scenarios of transient solar radiation. Here, the performance of the PID controller was compared to experimental results obtained from an industrial PID controller embedded in a 7 kW electric furnace. Results show that the combined PID controller is successful in maintaining a stable temperature inside the reactor by regulating the incoming solar radiation and the flowrate via small steady-state error and reasonable settling time and overshoot.

14 SOLAR ENERGY↗

DOE OSTI2020

HDG-1 Graphite Preirradiation Data Package Report

This report documents all pre-irradiation examination material-property measurement data for graphite specimens that are going to be used within the first high dose graphite (HDG) -1 irradiation capsule. The two new HDG capsules signify a major change to the AGC Experiment. HDG-1 and HDG-2 will replace the last two Advanced Graphite Creep (AGC) capsules (AGC-5 and AGC-6) which were designed to irradiate graphite at the extreme upper operational temperatures for a very-high-temperature reactor (VHTR) design, 1100°C. These very high temperature AGC-5 and AGC-6 capsules have been repurposed to re-irradiated specimens (from AGC-2, AGC-3, and AGC-4) at the lower temperatures of 600°C and 800°C. HDG-1 will be irradiated at 600°C and HDG-2 will be irradiated at 800°C. By re-irradiating the previous AGC specimens a total maximum neutron dose of around 15 dpa (displacements per atom) can be achieved for all major graphite grades at irradiation temperatures of 600°C and 800°C. Specimens in the HDG-1 capsule are made up of previously irradiated specimens from the AGC-2 capsule and unirradiated specimens prepared for the now discontinued AGC-5 capsule. Utilizing the irradiated specimens, a maximum neutron dose of around 15 dpa is anticipated. These new maximum dose levels will provide irradiated material property data over a total neutron dose range of 1-15 dpa at a temperature of 600°C when combined with the previous AGC-1 and AGC-2 irradiation data. This will provide quantitative data necessary for predicting the irradiation behavior and operating performance of new nuclear graphite grades for use within high temperature reactor designs. Similar to previous AGC test trains, HDG-1 includes the major graphite grades (IG-110, NBG-17, NBG-18, PCEA, and 2114) as well as adding the very fine-grain grade IG-430 which is of interest to the Molten Salt Reactor (MSR) designs. Also new to the HDG-1 capsule are 90 smaller geometry specimens designated as pencil specimens. These specimens take up only one third the space of a standard creep size specimen. This increased number of specimens will enhance property measurement statistics because they will provide 3 times the control specimen data at a position that would otherwise only have a single measurement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

HDG-1 Graphite Preirradiation Data Package Report

This report documents all pre-irradiation examination material-property measurement data for graphite specimens that are going to be used within the first high dose graphite (HDG) -1 irradiation capsule. The two new HDG capsules signify a major change to the AGC Experiment. HDG-1 and HDG-2 will replace the last two Advanced Graphite Creep (AGC) capsules (AGC-5 and AGC-6) which were designed to irradiate graphite at the extreme upper operational temperatures for a very-high-temperature reactor (VHTR) design, 1100°C. These very high temperature AGC-5 and AGC-6 capsules have been repurposed to re-irradiated specimens (from AGC-2, AGC-3, and AGC-4) at the lower temperatures of 600°C and 800°C. HDG-1 will be irradiated at 600°C and HDG-2 will be irradiated at 800°C. By re-irradiating the previous AGC specimens a total maximum neutron dose of around 15 dpa (displacements per atom) can be achieved for all major graphite grades at irradiation temperatures of 600°C and 800°C. Specimens in the HDG-1 capsule are made up of previously irradiated specimens from the AGC-2 capsule and unirradiated specimens prepared for the now discontinued AGC-5 capsule. Utilizing the irradiated specimens, a maximum neutron dose of around 15 dpa is anticipated. These new maximum dose levels will provide irradiated material property data over a total neutron dose range of 1-15 dpa at a temperature of 600°C when combined with the previous AGC-1 and AGC-2 irradiation data. This will provide quantitative data necessary for predicting the irradiation behavior and operating performance of new nuclear graphite grades for use within high temperature reactor designs. Similar to previous AGC test trains, HDG-1 includes the major graphite grades (IG-110, NBG-17, NBG-18, PCEA, and 2114) as well as adding the very fine-grain grade IG-430 which is of interest to the Molten Salt Reactor (MSR) designs. Also new to the HDG-1 capsule are 90 smaller geometry specimens designated as pencil specimens. These specimens take up only one third the space of a standard creep size specimen. This increased number of specimens will enhance property measurement statistics because they will provide 3 times the control specimen data at a position that would otherwise only have a single measurement.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

AGC-4 Disassembly Report

The Advanced Reactor Terminology Graphite Research and Development program is currently measuring irradiated material property changes in several grades of nuclear graphite to predict behavior and operating performance within the core of these new high temperature reactor designs. The Advanced Graphite Creep (AGC) experiment, consisting of six irradiation capsules, will generate the irradiated graphite performance data for the Very High Temperature Reactor operating conditions. All six capsules in the experiment conducted at Idaho National Laboratory will be irradiated in the Advanced Test Reactor, disassembled in the Hot Fuel Examination Facility, and examined at the Idaho National Laboratory Research Center. This is the disassembly report describing the disassembly, shipment, post irradiation inspection, and storage of the graphite specimens contained within the AGC 4 irradiation test series capsule (the fourth irradiation capsule of the series). AGC 4 was irradiated in the Advanced Test Reactor (ATR) East Flux Trap (EFT) during ATR Cycle 157D, 158A, 162A, 162B, 164A, 164B, 166A, and Cycle 166B. Approximately 3.6 dpa was achieved. Desired experiment temperatures were exceeded by at least 100C during the second Cycle of irradiation due to the insertion of the KJRR experiment. The capsule was removed from the ATR and transferred to the Hot Fuel Examination Facility on May 15, 2020 and eventually unloaded into the Hot Fuel Examination Facility (HFEF) Decon Cell through Penetration 2D on February 26, 2021. It was moved to the HFEF Main Cell Window 3M for disassembly on March 15, 2021. Disassembly and specimen extraction began March 18, 2021, and packaging of the graphite specimens was completed on April 16, 2021. Several anomalies were noted, specifically that the radiological dose rates were nominally an order of magnitude higher than that of the previous AGC experiments. This report summarizes the disassembly of the AGC 4 experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

AGC-4 Disassembly Report

The Advanced Reactor Terminology Graphite Research and Development program is currently measuring irradiated material property changes in several grades of nuclear graphite to predict behavior and operating performance within the core of these new high temperature reactor designs. The Advanced Graphite Creep (AGC) experiment, consisting of six irradiation capsules, will generate the irradiated graphite performance data for the Very High Temperature Reactor operating conditions. All six capsules in the experiment conducted at Idaho National Laboratory will be irradiated in the Advanced Test Reactor, disassembled in the Hot Fuel Examination Facility, and examined at the Idaho National Laboratory Research Center. This is the disassembly report describing the disassembly, shipment, post irradiation inspection, and storage of the graphite specimens contained within the AGC 4 irradiation test series capsule (the fourth irradiation capsule of the series). AGC 4 was irradiated in the Advanced Test Reactor (ATR) East Flux Trap (EFT) during ATR Cycle 157D, 158A, 162A, 162B, 164A, 164B, 166A, and Cycle 166B. Approximately 3.6 dpa was achieved. Desired experiment temperatures were exceeded by at least 100C during the second Cycle of irradiation due to the insertion of the KJRR experiment. The capsule was removed from the ATR and transferred to the Hot Fuel Examination Facility on May 15, 2020 and eventually unloaded into the Hot Fuel Examination Facility (HFEF) Decon Cell through Penetration 2D on February 26, 2021. It was moved to the HFEF Main Cell Window 3M for disassembly on March 15, 2021. Disassembly and specimen extraction began March 18, 2021, and packaging of the graphite specimens was completed on April 16, 2021. Several anomalies were noted, specifically that the radiological dose rates were nominally an order of magnitude higher than that of the previous AGC experiments. This report summarizes the disassembly of the AGC 4 experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Continuous Fly-Through High-Temperature Synthesis of Nanocatalysts

Conventional thermal treatment system, such as muffle and tube furnaces, typically feature low ramping and cooling rates, which lead to steep thermal gradients during bulk material synthesis that generate inefficient, non-uniform reaction conditions and result in nanoparticle aggregation. Herein, we demonstrate a continuous fly-through material synthesis approach using a novel high-temperature reactor design based on the emerging thermal-shock technology. By facing two sheets of carbon paper with a small distance apart (1–3 mm), we are able to generate uniform, ultra-high temperatures that can reach up to 3200 K within 50 ms by simply applying a voltage of 15 V. We can control this high-temperature to enable ultrafast chemical reactions by continuously feeding raw materials through the device from one end to the other, allowing the final products to be rapidly collected. As a proof-of-concept demonstration, we synthesized Pt nanocatalysts ~4 nm in size anchored to carbon black via this fly-through high-temperature reactor at ~1400 K. Furthermore, we find these supported Pt nanoparticles feature excellent electrocatalytic activities toward methanol oxidation reaction. Compared to existing heating methods, this continuous fly-through high temperature reactor offers a new and highly efficient platform for the synthesis of nanomaterials at high temperatures.

Qiao, Yun↗

DOE OSTI2022

Initial Development of Variable Design Lifetimes and Creep-Fatigue Evaluations for ASME Section III, Division 5, Class B Code Rules

This report summarizes the initial development of new ASME Section III, Division 5, Class B rules to address the gaps identified for new high temperature reactor designs. The overall objective is to introduce the design-by-analysis approach, the variable design lifetimes for primary load design, and the strain limits and creep-fatigue damage evaluations for Class B components. It is also desired that the new evaluation procedures do not require stress classification and stress linearization. Further, the data requirements to support the development of design parameters for the new Class B rules would not be overly burdensome, and less extensive than those supporting Class A rules. We have identified the Elastic, Perfectly Plastic (EPP) method as the design by-analysis approach for primary load design, and developed allowable stress criteria for variable design lifetimes, up to 500,000 hours, that only require data typical for the allowable stresses in Section II, Part D, Tables 1A and 1B. We have also adapted the elastic analysis approach from HBB-T-1400 and Section III, Mandatory Appendix XIII, XIII-2400 and XIII-3520(e) for the new Class B creep-fatigue evaluation procedure. A new elastic follow-up-based Isochronous Stress Strain Curve (ISSC) stress relaxation procedure has been developed to provide adequate conservatism commensurate with Class B constructions. No stress classification and stress linearization are required in the new procedure. Future work needed to complete the development is also summarized.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Initial Developments in Modeling Graphite Behavior

Graphite is used in High Temperature Reactor designs as a moderator, reflector and core material responsible for protecting the fuel and maintaining structural stability. From a safety perspective, it is imperative to be able to predict how graphite will behave under reactor operating conditions which may compromise the core’s structural integrity or fuel’s safety performance. The following report summarizes recent modeling work undertaken at Idaho National Laboratory which focuses on graphite degradation behavior. One phenomenon which is explored in this report and can cause significant degradation to graphite properties is oxidation. Oxidation behavior in graphite is highly temperature dependent. At low temperatures, oxygen can fully penetrate a component and cause a homogeneous damage profile. At high temperatures, only the graphite near the surface of a component is affected. Understanding and modeling this temperature dependence is essential to predicting graphite behavior. In this report, three graphite models are discussed. The first model is used to investigate strength loss after low temperature oxidation. It does this by generating an approximate graphite microstructure then determining the required load to cause crack propagation. It has been shown that the model reproduces the quasi brittle stress versus strain relationship observed in graphite. Strength loss results from the model are shown to match experimental values. The second model investigates strength loss under high temperature oxidation conditions. This model is more applicable to full scale graphite components where the oxidation damage is often inhomogeneous throughout a component. The third model computes stresses in graphite under reactor conditions. Specifically, the model incorporates the effect of creep, irradiation dose, thermal strains, and oxidation in order to predict internal stresses in a component. All of these models are implemented in the Multiphysics Object-Oriented Simulation Environment (MOOSE), an open source, parallel finite element framework.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Multi-scale fission product release model with comparison to AGR data

TRistructural ISOtropic (TRISO) particle fuel is central to several advanced, high-temperature reactor designs. Each particle consists of a fuel kernel encapsulated by three layers of carbon and ceramics that prevent the release of fission products and ensure physical integrity. Despite outstanding retention properties, fission product release has been observed from intact particles. To better understand and quantify fission product release from TRISO particles, a multiscale, mechanistic model of fission product transport is being developed by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. Previous work focused on silver (Ag) transport and improved Ag release predictions. The work described in this report builds on this experience to better understand cesium (Cs) transport in silicon carbide (SiC), the main barrier to the release of fission products. Atomistic simulations provide bulk and grain boundary (GB) Cs diffusivities in SiC, which are used by phase field simulations in the mesoscale code Marmot to determine the temperature, microstructure, and irradiation-dependent Cs diffusivity at the mesoscale in SiC. This approach attributes the different temperature regimes experimentally observed for Cs diffusivities in SiC to a transition from bulk-dominated diffusivity at high temperatures to a GB-dominated regime at low temperatures, providing new insight. The multiscale, mechanistic effective diffusivity is then implemented in the fuel performance code BISON and further validated by comparing Cs release predictions from Advanced Gas Reactor (AGR)-1 and AGR-2 post-irradiation measurements. The new model improves BISON’s predictability. This document also reports improvements made on Ag transport modeling by accounting for different GB types having different diffusivities. Moreover, this report details preliminary efforts to model palladium (Pd) attack of the SiC at the mesoscale using a phase field approach. Pd attack and its impact on accelerated Ag transport remains a misunderstood phenomenon, and we use the model to demonstrate that the formation of lamellae that has been observed in experiments can be explained by the reaction of Pd with SiC to form alternating layers of graphite and Pd 2 Si. This effort aims to improve our understanding of the reaction and eventually provide a model for BISON to account for Pd penetration and its effects on fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

FY23 status report on the development of new ASME Section III, Division 5 Class B rules

This report summarizes the work done in Fiscal Year 2023 on the development of the new American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section III, Division 5, Class B rules to address the gaps identified for high temperature reactor designs. The summary of the design-by-analysis strain limit evaluation and creep-fatigue damage assessment is presented. The proposed design-by-analysis creep-fatigue damage calculation approach uses a new elastic follow-up-based Isochronous Stress Strain Curve stress relaxation procedure. This approach captures the elastic follow-up generated due to interactions of components with adjacent components, supports, and other connections in the power plant. A set of sample problems are selected to validate the proposed design-by-analysis rules for creep-fatigue damage assessment. The proposed Class B rules are evaluated against the Class A elastic design rules, and the experimental data obtained from a family of Simplified Model Test based key-feature test results. The proposed Class B creep-fatigue damage assessment methodology yields conservative design cycles estimates compared to the experimental results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

AGC-2 Graphite Preirradiation Data Analysis Report

This report describes the specimen loading order and documents all preirradiation examination material property measurement data for graphite specimens contained within the Second Advanced Graphite Capsule (AGC 2) irradiation capsule. The AGC 2 capsule is the second in six planned irradiation capsules comprising the Advanced Graphite Creep (AGC) test series. The AGC test series is used to irradiate graphite specimens in order to garner quantitative data necessary for predicting the irradiation behavior and operating performance of new nuclear grade graphites. This testing will ascertain the in service behavior of the graphite for pebble bed and prismatic very high temperature reactor designs. Similar to the First Advanced Graphite Capsule (AGC 1) preirradiation examination report, material property tests were conducted on specimens from 18 nuclear grade graphite types. However, AGC 2 tested an increased number of specimens (i.e., 512) prior to loading them into the AGC 2 irradiation assembly. All AGC 2 specimen testing was conducted at Idaho National Laboratory from July 2009 to August 2010. This report also details the specimen loading methodology for graphite specimens inside the AGC 2 irradiation capsule. The AGC 2 capsule design requires “matched pair” creep specimens that have similar dose levels above and below the neutron flux profile mid plane. This provides similar specimens with and without an applied load. Analysis in this document utilizes the neutron flux profile calculated for the AGC 2 capsule design, the capsule dimensions, and the size (i.e., length) of the selected graphite specimens to create a stacking order that produces “matched pairs” of graphite specimens above and below the AGC 2 capsule elevation mid point, thus providing specimens with similar neutron dose levels.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Elevated Temperature Graphite Mechanical Testing

High purity graphite will be used for core components within most High Temperature Reactor (HTR) designs. Several "high tech” industries currently utilize synthetic, high-purity, commercially available graphite components to fabricate photovoltaic cells, semi-conductors, optical fibers, and other high value electronic industry products. New advanced HTR designs are also interested in using these graphite grades for long-term, internal core component applications. Consequently, the US Department of Energy, Advanced Reactor Technologies (DOE-ART) program has spent several years testing different high purity graphite grades for potential use within these new nuclear reactor designs. A significant part of that effort has been in the development and improvement of American Society for Testing and Materials (ASTM) test standards specifically for nuclear graphite grades. Nearly all ASTM test standards have either been developed or improved by the DOE-ART program over the past 25 years. The ART program continues to assist in the development of new ASTM test standards in support of the future commercial HTR fleet currently being designed and built in the USA. The newest effort undertaken by ART is the development of high temperature mechanical testing practices that may be acceptable for a future ASTM test standard (or guide) for this critical material property measurement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Design of Defensive Cybersecurity Architectures for High Temperature, Gas-Cooled Reactors

This report presents the design of defensive cybersecurity architectures (DCSAs) for High Temperature, Gas-Cooled Reactors (HTGRs). A DCSA is a cybersecurity design feature that places systems into security zones in a graded approach according to the importance of the functions performed by the systems. DCSA design efforts for advanced reactors may commence as early as the system-level design phase. This design approach is consistent with the draft regulatory guide for advanced reactor cybersecurity programs (DG-5075) and enables advanced reactor designers to consider the effects of security-by-design (SeBD) features on their DCSAs. Integration of DCSA design and other cybersecurity activities with the traditional design process as part of a SeBD framework may enable advanced reactor designers to improve the security posture of their plants while reducing implementation and operating costs. This report provides a DCSA template for an exemplar HTGR and describes a DCSA design process using event tree analysis so that the template may be optimized for a given HTGR design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Equilibrium core modeling of a pebble bed reactor similar to the Xe-100 with SCALE

As the nuclear industry moves towards licensing and constructing advanced reactors, new attention has been focused on the advanced reactor designs that have past operational experience, such as pebble-bed high-temperature gas-cooled reactors (PB-HTGRs). Pebble-bed reactor designs have many advantages, such as their higher operating temperatures and online refueling capabilities. However, high-fidelity computational modeling of pebble-bed reactor designs, from reactor startup to operation at equilibrium, is more challenging compared to conventionally fueled reactors due to the continuous movement of the fuel pebbles through the reactor during operation. In previous work at Oak Ridge National Laboratory (ORNL), the SCALE Leap-In method for Cores at Equilibrium (SLICE) was developed around tools within the SCALE code system. This iterative method can effectively generate pebble-bed reactor zone-wise fuel inventories at equilibrium core operation within a reasonable computational time. The objective of this work was to further verify the ORNL SLICE method and to investigate the impact of considering temperature profiles during the application of the method. The SLICE method was applied to a modular high-temperature gas-cooled reactor design based upon publicly available design specifications of the Xe-100 pebble-bed reactor. Upon comparing the results from the SLICE method to published literature, the differences in the eigenvalue k effective were on the order of several hundred pcm (percent millirho). To investigate one possible cause of these differences, a study looking at the sensitivity of the full-core equilibrium k effective and discharge nuclide inventory to temperature was performed by developing equilibrium cores of two additional temperature profiles. From this temperature study, differences on the order of hundreds of pcm for the full-core equilibrium k effective , and up to 15% difference for the discharge inventories were found. In conclusion, these results indicated the strong dependence on temperature that needs to be considered for future work in equilibrium modeling of PB-HTGRs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

Anisotropic temperature-dependent elastic constants and thermal conductivities of TRISO particle coatings

Tristructural isotropic (TRISO) particles show great promise as a candidate fuel for use in several next-generation high-temperature nuclear reactor designs due to their structural integrity and fuel performance at high temperatures and burnups. Computational codes exist that can simulate TRISO fuel performance characteristics and failure probabilities under extreme conditions which require knowledge of the TRISO coatings’ thermophysical properties. The thermophysical descriptions of the TRISO particle's layers (i.e., buffer, pyrolytic carbon, and silicon carbide) currently used in fuel performance codes, however, assume that many of these properties are constant with respect to temperature or texture. In this paper, we obtain the full elastic stiffness tensors of the carbon and silicon carbide layers, which have transversely isotropic symmetry. Additionally, the calculated elastic properties of each of the coating layers are in remarkable agreement with the current models at room temperature and correct orientations. Additionally, the textured 3C-SiC layer was found to exhibit novel auxetic behavior above 1500 °C. The anisotropic temperature-dependent thermal conductivities of the carbon layers were calculated using acoustical Grüneisen-Debye theory which are in excellent agreement with current models at room temperature and correct orientations. These texture- and temperature-dependent relationships can be incorporated into the thermophysical description of TRISO particles in order to more accurately model fuel performance and failure probabilities under extreme conditions in forthcoming high-fidelity computational simulations.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Regulatory Considerations Regarding Potential High Temperature Fluid Releases in Advanced Reactor Designs

The current effort is supported by the U.S. Department of Energy (DOE), Advanced Reactor Demonstration Program (ARDP) Regulatory Development, Regulatory Framework Modernization area, which seeks to address potential regulatory challenges for advanced reactor vendors that are currently or will soon be initiating the licensing process. In pursuit of this goal, this effort seeks to aid the advanced reactor industry and regulatory bodies in understanding and addressing the potential occurrence of high-temperature fluid releases in advanced reactor designs as part of licensing and regulatory oversight of operation. Improving the awareness and understanding of the behavior and potential consequences associated with high-temperature fluid release events can ensure that they are appropriately considered and addressed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗