SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
New technique produces high-mobility multilayer films suitable for use on silicon process line. New material is multilayer film of alternate layers of silicon and alloy of silicon and germanium. Films grown thus far have electron mobilities 50 percent greater than epitaxial silicon films grown previously.
Measurements showing dramatic nonlocal behavior in the four-terminal resistances of a high-mobility quantum Hall conductor are presented. These measurements illustrate that the standard definition of the resistivity tensor is inappropriate, but they are in excellent agreement with a new model of the conductor that treats the edge and bulk conducting pathways independently. This model uses a single intensive parameter, analogous to a local resistivity for the bulk channel only, to characterize the system.
A combination of ultrafast, long-range, and low-loss excitation energy transfer from the photoreceptor location to a functionally active site is essential for cost-effective polymeric semiconductors. Delocalized electronic wavefunctions along π-conjugated polymer (CP) backbone can enable efficient intrachain transport, while interchain transport is generally thought slow and lossy due to weak chain–chain interactions. In contrast to the conventional strategy of mitigating structural disorder, amorphous layers of rigid CPs, exemplified by highly planar poly(indacenodithiophene-co-benzothiadiazole) (IDT-BT) donor-accepter copolymer, exhibit trap-free transistor performance and charge-carrier mobilities similar to amorphous silicon. Here, we report long-range exciton transport in HJ -aggregated IDTBT thin-film, in which the competing exciton transport and exciton–exciton annihilation (EEA) dynamics are spectroscopically separated using a phase-cycling-based scheme and shown to depart from the classical diffusion-limited and strong-coupling regime. In the thin film, we find an annihilation-limited mechanism with ≪100% per-encounter annihilation probability, facilitating the minimization of EEA-induced excitation losses. In contrast, excitons on isolated IDTBT chains diffuse over 350 nm with 0.56 cm 2 s −1 diffusivity, before eventually annihilating with unit probability on first contact. We complement the pump–probe studies with temperature-dependent photocurrent and EEA measurements from 295 K to 77 K and find a remarkable correspondence of annihilation rate and photocurrent activation energies in the 140 K to 295 K temperature range.
Here, we report quantum oscillations in magnetoresistance that are periodic in magnetic field (𝐵), observed at the interface between (La 0.3 Sr 0.7 )(Al 0.65 Ta 0.35 )O 3 and SrTiO 3 . Unlike Shubnikov–de Haas oscillations, which appear at magnetic fields > 7 T and diminish quickly as the temperature rises, these 𝐵-periodic oscillations emerge at low fields and persist up to 10 K. Their amplitude decays exponentially with both temperature and field, specifying dephasing of quantum interference. Increasing the carrier density through electrostatic gating results in a systematic reduction in both the amplitude and frequency of the oscillations, with complete suppression beyond a certain gate voltage. We attribute these oscillations to the Altshuler-Aronov-Spivak effect, likely arising from naturally formed closed-loop paths due to the interconnected quasi-one-dimensional conduction channels along SrTiO 3 domain walls. The relatively long phase coherence length (≃ 1.8 µm at 0.1 K), estimated from the oscillation amplitude, highlights the potential of complex oxide interfaces as a promising platform for exploring quantum interference effects and advancing device concepts in quantum technologies, such as mesoscopic interferometers and quantum sensors.
Explore the source record for details and available documents.
This paper presents results of a life support architecture study based on a 2009 NASA lunar surface exploration scenario known as Scenario 12. The study focuses on the assembly complete outpost configuration and includes pressurized rovers as part of a distributed outpost architecture in both stand-alone and integrated configurations. A range of life support architectures are examined reflecting different levels of closure and distributed functionality. Monte Carlo simulations are used to assess the sensitivity of results to volatile high-impact mission variables, including the quantity of residual Lander oxygen and hydrogen propellants available for scavenging, the fraction of crew time away from the outpost on excursions, total extravehicular activity hours, and habitat leakage. Surpluses or deficits of water and oxygen are reported for each architecture, along with fixed and 10-year total equivalent system mass estimates relative to a reference case. System robustness is discussed in terms of the probability of no water or oxygen resupply as determined from the Monte Carlo simulations.
Type 1 diabetes (T1D) results from autoimmune-mediated destruction of insulin-producing β cells in the pancreatic islet. This process is modulated by pro-inflammatory cytokine signaling, which has been previously shown to alter protein expression in ex vivo islets. Herein, we applied top-down proteomics to globally evaluate proteoforms from human islets treated with proinflammatory cytokines (interferon-γ and interleukin-1β). We measured 1636 unique proteoforms across six donors and two time points (control and 24 h post-treatment) and observed consistent changes in abundance across the glicentin-related pancreatic polypeptide (GRPP) and major proglucagon fragment regions of glucagon, as well as the LF-19/catestatin and vasostatin-1/2 region of chromogranin-A. We also observe several proteoforms that increase after cytokine-treatment or are exclusively observed after cytokine-treatment, including forms of beta-2 microglobulin (B2M), high-mobility group N2 protein (HMGN2), and chemokine (C-X-C motif) ligands (CXCL). Together, our quantitative results provide a baseline proteoform profile for human islets and identify several proteoforms that may serve as interesting candidate markers for T1D progression or therapeutic intervention.
Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide (SiC) [Zhao, J. Nature 2024, 625 (7993), 60−65, 10.1038/s41586-023-06811-0] provided an important step toward integration of the graphene-based system into active components in postsilicon micro- and nanoelectronics. However, the exact atomic-scale structure and complex bonding configurations of the first epitaxial graphene carbon layer (C buffer ) remain an open problem. Our recent report [Kolmer, M. Communications Physics 2024, 7 (1), 16, 10.1038/s42005-023-01515-3] has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the C buffer –SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Bias voltage and epitaxial graphene thickness-dependent characterization of the collective C buffer –SiC interface showed that “Si” vacancy sites beneath C buffer are stable under STM electric fields. Moreover, the vacancies introduce localized electronic states below the Fermi level, thereby enhancing the charge-transfer phenomenon across the interface.
Understanding charge transport in semiconductor quantum dot (QD) assemblies is important for developing the next generation of solar cells and light-harvesting devices based on QD technology. One of the key factors that governs the transport in such systems is related to the hybridization between the QDs. Recent experiments have successfully synthesized QD molecules, arrays, and assemblies by directly fusing the QDs, with enhanced hybridization leading to high carrier mobilities and coherent band-like electronic transport. Here, in this work, we theoretically investigate the electron transfer dynamics across a finite CdSe-CdS core-shell QD array, considering up to seven interconnected QDs in one dimension. We find that, even in the absence of structural and size disorder, electron transfer can become localized by the emergent low-frequency superlattice vibrational modes when the connecting neck between QDs is narrow. On the other hand, we also identify a regime where the same vibrational modes facilitate coherent electron transport when the connecting necks are wide. Overall, we elucidate the crucial effects of electronic and superlattice symmetries and their couplings when designing high-mobility devices based on QD superlattices.
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) exhibit exceptional electrical and optical properties, empowering their promising prospects for future nanoelectronics. Despite major advances in n-type 2D semiconductors, the field has yet to synthesize high-mobility p-type 2D TMDs, in particular WSe 2 , and systematically query the influence of defects. In this study, we unveil the pivotal role of substitutional impurity defects vis-à-vis the precursor used and growth method employed in defining the quality of 2D p-type WSe 2 . Density functional theory calculations suggest the adverse effect of Fe-, Co-, Ni- and Si-substituted W impurity defects on the mobility of WSe 2 , whereas defects such as O-, S-substituted Se and Mo-substituted W pose negligible impact. Guided by the theory, we pinpoint van der Waals (vdW) crystals, commonly used in mechanical exfoliation, as the optimal precursor, and develop a facile vdW crystal physical vapor deposition (PVD) method to grow high-purity monolayer 2D WSe 2 film (VPVD-WSe 2 ) that is continuous across a centimeter scale. A suite of spectroscopies confirms the markedly reduced defect density of the as-synthesized WSe 2 compared to those by typical chemical vapor deposition methods, and by PVD with commercial or hydrothermal precursors. Scanning tunneling microscopy further evidence the ultralow substitutional impurity defect density of VPVD-WSe 2 , greatly outperforming the control samples and approaching the mechanically exfoliated counterparts. The VPVD-WSe 2 based field-effect transistors exhibit notable electrical performance with record-high field-effect hole mobility up to 112 cm 2 V –1 s –1 at room temperature, exceeding the best-reported monolayer WSe 2 synthesized by chemical vapor deposition and rivaling the mechanically exfoliated 2D WSe 2 flakes.
Abstract 2D semiconductors offer a promising pathway to replace silicon in next-generation electronics. Among their many advantages, 2D materials possess atomically-sharp surfaces and enable scaling the channel thickness down to the monolayer limit. However, these materials exhibit comparatively lower charge carrier mobility and higher contact resistance than 3D semiconductors, making it challenging to realize high-performance devices at scale. In this work, we search for high-mobility 2D materials by combining a high-throughput screening strategy with state-of-the-art calculations based on the ab initio Boltzmann transport equation. Our analysis singles out a known transition metal dichalcogenide, monolayer WS 2 , as the most promising 2D semiconductor, with the potential to reach ultra-high room-temperature hole mobilities in excess of 1300 cm 2 /Vs should Ohmic contacts and low defect densities be achieved. Our work also highlights the importance of performing full-blown ab initio transport calculations to achieve predictive accuracy, including spin–orbital couplings, quasiparticle corrections, dipole and quadrupole long-range electron–phonon interactions, as well as scattering by point defects and extended defects.
The nature of interchain π-system contacts, and their relationship to hole transport, are elucidated for the high-mobility, noncrystalline conjugated polymer C16-IDTBT by the application of scanning tunneling microscopy, molecular dynamics, and quantum chemical calculations. The microstructure is shown to favor an unusual packing motif in which paired chains cross-over one another at near-perpendicular angles. By linking to mesoscale microstructural features, revealed by coarse-grained molecular dynamics and previous studies, and performing simulations of charge transport, it is demonstrated that the high mobility of C16-IDTBT can be explained by the promotion of a highly interconnected transport network, stemming from the adoption of perpendicular contacts at the nanoscale, in combination with fast intrachain transport.
A binary system of particles that move in opposite directions under an applied field can exhibit disordered states as well as laned states where the particles organize into oppositely moving high-mobility lanes to reduce collisions. Previous studies of laning transitions generally focused on particles with purely repulsive interactions. Here, in this study, we examine laning transitions for oppositely moving pattern-forming systems of particles with competing attractive and repulsive interactions, which in equilibrium form crystal, stripe, and bubble states. In addition to multiple types of laned states, we find jammed crystals, stripes, and bubbles, and generally observe a much richer variety of phases compared to the purely repulsive system. In the stripe-forming regime, the system can dynamically reorder into oppositely moving stripes that are aligned in the direction of the drive. The bubble phase can produce strongly polarized jammed states of elongated bubbles where particles in the individual bubbles segregate to opposite sides of the bubbles. We also find disordered states, segregated laned bubble states where the bubbles pass each other in lanes, and segregated bubbles that move through one another. In the compact bubble regime, we obtain a plastic bubble state in which the oppositely driven particles remain trapped in the bubbles but the bubbles move past each other at a slow velocity due to a net imbalance in the bubble population. At higher drives, individual particles begin to jump from bubble to bubble. We show that the different phases and the transitions between them produce signatures in the velocity-force and differential mobility curves. We demonstrate that the force for escaping from the jammed state is nonmonotonic, with stripes exhibiting the lowest unjamming force.
The concept of fluidic viscosity is ubiquitous in condensed-matter systems hosting a continuum where macroscopic properties can emerge. While an important property of liquids and some solids, only recently was the viscosity of an electron shown to play a role in electronic transport experiments. In this Letter, we present nonlocal electronic transport measurements in concentric annular rings formed in high-mobility two-dimensional electron gases, and the resulting data show that viscous hydrodynamic flow can occur far away from the source-drain current region. Our conclusion of viscous electronic transport is further corroborated by simulations of the Navier-Stokes equations that are found to be in agreement with our measurements below T = 1 K . Finally, this work emphasizes the key role played by viscosity via electron-electron ( e − e ) interaction even when the electronic transport is restricted radially, and for which it should have played no major role. Published by the American Physical Society 2025
Transition metal oxides in the (111) orientation have been predicted to harbor topological phases and unconventional quantum states because of their hexagonal crystal symmetry and strong interactions between charge, spin, and orbital degrees of freedom. We report Shubnikov–de Haas oscillations into the quantum limit at magnetic fields up to 35 T in high-mobility (>20 000 cm 2 V −1 s −1 ) two-dimensional electron liquids at (111)-oriented SrTiO 3 interfaces with controllable carrier densities. Spin splitting is observed at low Landau levels, which is attributed to the interplay between the Zeeman splitting and Rashba spin-orbit coupling according to our theoretical modeling, yielding Landé factor 𝑔 = 0.29 and Rashba coefficient 𝛼 = 0.6 meV nm. Furthermore, at high magnetic field after the system reaches the lowest Landau level, the temperature dependence of the resistance shows a metallic to insulating state transition with the magnetoresistance changing significantly from a primarily quadratic to a large linear field dependence.
Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide, provided an important step towards integration of the graphene-based system into active components in post-silicon micro- and nano-electronics. However, the exact atomic-scale structure and the complex bonding configurations of the first epitaxial graphene carbon layer remain an open problem. Our recent report has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the Cbuffer-SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present the direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Experimental STM and density functional theory modeling data were used in the preparation of figures in a published article in the Journal of Physical Chemistry Letters. Files related to the figures and supplementary materials in the article are present in this dataset in .txt format.
Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide, provided an important step towards integration of the graphene-based system into active components in post-silicon micro- and nano-electronics. However, the exact atomic-scale structure and the complex bonding configurations of the first epitaxial graphene carbon layer remain an open problem. Our recent report has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the Cbuffer-SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present the direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Experimental STM and density functional theory modeling data were used in the preparation of figures in a published article in the Journal of Physical Chemistry Letters. Files related to the figures and supplementary materials in the article are present in this dataset in .txt format.
Diode formed by selective doping during epitaxial growth, starting with semi-insulating substrate. Use of high-mobility semiconductors like GaAs extends cutoff frequency. Either molecular-beam epitaxy (MBE) or organometallic chemical-vapor deposition used to form layers of diode. Planar growth process permits subsequent fabrication of arrays of diodes by standard photolithographic techniques, to achieve quasi-optical coupling of submillimeter radiation. Useful for generation of harmonics or heterodyne mixing in receivers for atmospheric and space spectroscopy operating at millimeter and submillimeter wavelengths. Used as frequency doublers or triplers, diodes of new type extend frequency range of present solid-state oscillators.