SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pulse amplitude discriminator is specially designed for nuclear counting applications. At very high rates, the threshold is stable. The output-pulse width and the dead time change negligibly. The unit incorporates a provision for automatic dead-time correction.
High rate telemetry system for Mariner Mars 1969 mission
Mariner 1969 multimission high rate deep space telemetry system design, hardware and application
Noise variance extreme value estimator for biorthogonally block coded high rate telemetry system for Mariner missions
A time-division multiplexing system has been developed that is significantly different from commercially available equipments. Multiplexing is achieved by interleaving blocks of data from each source, preceded by a short coded bit pattern specifying the source of that particular block of data. Data blocks are transmitted as they become available from each particular source. Hence, synchronism of the input and output rates is not required. The prototype system can accommodate input rates as high as 461 kbit/sec on a single input channel, and output rates as high as 953 kbit/sec. The system makes possible use of an excess of 90% of channel capacity for information transmittal.
A two-channel telemetry system is described in which one channel is used for high-rate data and the other channel for low-rate data communication. In the transmitter a signal, which subsequently phase modulates a carrier, is produced which is a function of at least the high-rate data, the low-rate data and the frequency of the subcarrier of the low-rate channel. In the receiver which includes a phase-locked loop, the high-rate data is detected off the receiver inphase channel output and the low-rate off the quadrature channel output.
The DSN command system provided the capability to enter commands in a computer at the deep space stations for transmission to the spacecraft. The high-rate telemetry system operated at 16,200 bits/sec. This system will permit return to DSS 14 of full-resolution television pictures from the spacecraft tape recorder, plus the other science experiment data, during the two playback periods of each Goldstone pass planned for each corresponding orbit. Other features included 4800 bits/sec modem high-speed data lines from all deep space stations to Space Flight Operations Facility (SFOF) and the Goddard Space Flight Center, as well as 50,000 bits/sec wideband data lines from DSS 14 to the SFOF, thus providing the capability for data flow of two 16,200 bits/sec high-rate telemetry data streams in real time. The TDS performed prelaunch training and testing and provided support for the Mariner Mars 1971/Mission Operations System training and testing. The facilities of the ETR, DSS 71, and stations of the MSFN provided flight support coverage at launch and during the near-earth phase. The DSSs 12, 14, 41, and 51 of the DSN provided the deep space phase support from 30 May 1971 through 4 June 1971.
Deep space network tracking and radio navigation accuracy analysis, high-rate telemetry, and communications and facility engineering
Mathematical models of leakage configurations and various flow theories are presented with the substantive experimental test data to provide background material for future design and failure analysis. Normal-rate leakage and emergency, high-rate leakage are considered.
The design, integration, fabrication, test results, and flight performance of the battery system for the Mariner Mars spacecraft launched in May 1971 are presented. The battery consists of 26 20-Ah hermetically sealed nickel-cadmium cells housed in a machined magnesium chassis. The battery package weighs 29.5 kg and is unique in that the chassis also serves as part of the spacecraft structure. Active thermal control is accomplished by louvers mounted to the battery baseplate. Battery charge is accomplished by C/10 and C/30 constant current chargers. The switch from the high-rate to low-rate charge is automatic, based on terminal voltage. Additional control is possible by ground command or onboard computer. The performance data from the flight battery is compared to the data from various battery tests in the laboratory. Flight battery data was predictable based on ground test data.
The percentage of total power passed through ideal band-limited channels with bandwidths equal to various multiples of the bit rate is examined for 14 unique binary baseband signaling schemes. The channel bandwidth required to pass 5 percent of the total power is determined as a measure of the need for near-dc channel response. Conclusions are reached as to which signals would be most suitable for high-rate magnetic tape recording.
This paper concerns satellite repeater tradeoffs for a multiple-beam, multiple-channel, multiple-connectivity satellite postulated to serve a diversity of domestic U.S. noncommercial requirements, with a substantial portion of the satellite power, weight, and bandwidth dedicated to video distribution and bradcast. The orders-of-magnitude of the requirements are given for the video plus high-rate data traffic category. The designs of two alternative baseline repeater configurations are presented, and estimates of their weight and their prime power consumption are given. These data are the basis for estimating the weight and power consumption of a range of alternative beam coverage, modulation, and channel capacity systems. These estimates are used to illustrate tradeoffs with different performance criteria as the independent variable: number of channels per beam and total number of beam-channels.
Deposit, 5500-gram of Cu-0.15 wt % Zr alloy, sputtered onto copper cylinder to average thickness of 12.29 mm. Structure was achieved with high-rate sputter deposition for about 100 hours total sputtering time. Material had twice the strength of unsputtered material at temperatures to 723 K and equivalent strength at nearly 873 K.
Spaceborne digital recorders must satisfy the conflicting requirements of maximum data storage of high-rate data (particularly for high-resolution sensor data) and a long life with high reliability (meaning rugged design and moderate head-to-tape speeds). The multitrack longitudinal (fixed head) recorder can successfully resolve this conflict and satisfy both requirements. An evolutionary machine is described which was originally designed to store and reproduce 30 minutes of 39.9-Mb/sec sensor data, for mission lives on the order of one year; newer designs have surpassed these parameters by significant amounts.
The phrase 'bandwidth-compressive modulation' means that the compression is achieved not by removing redundancy from the data (data compression), but rather by modulating the carrier phase and amplitude with blocks of data bits. The modulation described here is quadrature amplitude shift keying (QASK), a logical extension of quadrature phase shift keying, (QPSK, or quadriphase). QASK is a cost-effective form of combined phase-and-amplitude modulation. That is, n-bit QASK, like most phase-amplitude forms of modulation, requires considerably less transmitter power than comparably performing n-PSK, while among the class of all n-bit phase-modulation types, n-bit QASK performs nearly optimally but requires the least circuit complexity. A simple, unique microwave transmitter is described which provides high-rate QASK modulation with 4:1 bandwidth compression. A suppressed carrier multiple-loop QASK receiver provides the necessary phase tracking, automatic gain control (AGC), and symbol timing.
The results of an experiment to determine the feasibility of using asynchronous transfer mode (ATM) technology to support advanced spacecraft missions that require high-rate ground communications and, in particular, full-motion video are reported. Potential nodes in such a ground network include Deep Space Network (DSN) antenna stations, the Jet Propulsion Laboratory, and a set of national and international end users. The experiment simulated a lunar microrover, lunar lander, the DSN ground communications system, and distributed science users. The users were equipped with video-capable workstations. A key feature was an optical fiber link between two high-performance workstations equipped with ATM interfaces. Video was also transmitted through JPL's institutional network to a user 8 km from the experiment. Variations in video depending on the networks and computers were observed, the results are reported.
Electric aircraft applications require electric motors with increased specific power and efficiency. Composite structural components in motors are a potential solution for reducing motor mass, reducing magnetic losses, and limiting undesired conduction paths for fault, electromagnetic interference, or common-mode currents. In this report, manufacturing trials for a high-speed carbon fiber reinforced polymer composite motor shaft are presented. Four prototype shafts were produced using a hybrid biaxial/triaxial fabric that was circumferentially wrapped onto an additively manufactured high-temperature washout mandrel. An additional traditional overbraid approach was also evaluated and shows promise for high-rate, high-performance parts using automated manufacturing. This paper discusses the shaft design, manufacturing methods explored, material selection, the manufacturing trials, and the lessons learned. The results of this manufacturing investigation show feasibility for manufacturing composite shafts for electric motors.
The successful design and fabrication of metallic cryotanks for commercial aviation applications require lightweight, durable materials capable of withstanding high pressures and cryogenic temperatures through tens of thousands of thermomechanical refueling cycles. Flow forming is an advanced manufacturing technique that offers high-rate production and scalability for fabricating integrally stiffened cylinders suitable for cryotank applications. This work establishes the durability of flow-formed aluminum alloys by characterizing their fatigue life performance under conditions that mimic cryotank refueling cycles. Residual stresses in flow-formed aluminum-lithium (Al-Li) 2195-T6 cylinders were assessed using the contour method and found to be minimal. Fatigue life testing was conducted on flow-formed Al-Li 2195-T6 at room temperature and cryogenic temperatures (-321°F [-196°C]), with wrought Al-Li 2195-T6 serving as a baseline for comparison. Results showed that flow-formed materials exhibited fatigue performance comparable to or better than wrought materials, with no statistically significant differences observed between different specimen orientations relative to processing directions. Fractography revealed reduced delaminations in the flow-formed Al-Li 2195 samples as compared to wrought, indicating potential improvement to the microstructure that could result in improved service properties. Texture analysis using electron backscattered diffraction (EBSD) indicated recrystallization during heat treatment, potentially contributing to reduced delamination susceptibility. These findings demonstrating flow-formed material durability coupled with the high manufacturing efficiency of flow forming, makes flow forming an attractive process to produce aircraft cryotanks.