SEARCH · Search NASA

Results for “Low-temperature Chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Metal-silicate thermochemistry at high temperature - Magma oceans and the 'excess siderophile element' problem of the earth's upper mantle

Low-temperature metal-silicate partition coefficients are extrapolated to magma ocean temperatures. If the low-temperature chemistry data is found to be applicable at high temperatures, an important assumption, then the results indicate that high temperature alone cannot account for the excess siderophile element problem of the upper mantle. For most elements, a rise in temperature will result in a modest increase in siderophile behavior if an iron-wuestite redox buffer is paralleled. However, long-range extrapolation of experimental data is hazardous when the data contains even modest experimental errors. For a given element, extrapolated high-temperature partition coefficients can differ by orders of magnitude, even when data from independent studies is consistent within quoted errors. In order to accurately assess siderophile element behavior in a magma ocean, it will be necessary to obtain direct experimental measurements for at least some of the siderophile elements.

Capobianco, Christopher J.↗

NASA NTRS1992

Europa: Prospects for an ocean and exobiological implications

As far as we know, Earth is the only planet in our solar system that supports life. It is natural, therefore, that our understanding of life as a planetary phenomenon is based upon Earth-like planets. There are environments in the solar system where liquid water, commonly believed to be a prerequisite for biological activity, may exist in a distinctly non-Earth-like environment. One such location is Europa, one of the Galilean satellites of Jupiter. The possibility that liquid water exists on Europa presents us with some interesting exobiological implications concerning the potential of the satellite to support life. Topics include the following: an ocean on Europa; thermal evolution of Europa; Europa's three models; exobiological implications; early conditions of Europa; low-temperature abiotic chemistry; possibility of the emergence of life on Europa; prerequisites for the habitability of Europa; energy sources for biosynthesis and metabolic activity; habitability of Europa by anaerobic life; and habitability by aerobic life.

Oro, John↗

NASA NTRS1976

Thermal-chemical instabilities in CO clouds

The stability of interstellar clouds containing CO is analyzed taking account of formation processes for CO. Two such processes are examined: O(+) charge exchange and C(+) radiative association. It is found that the C(+) radiative-association chemistry leads to low-temperature instabilities which influence the evolution of clouds. It is also found that instability may set in if CO production increases sufficiently with density, that the O(+) charge-exchange chemistry leads to instability associated with attenuation of the interstellar radiation field by grains, and that thermal instabilities will also result if grain formation, rather than ion-molecule chemistry, dominates CO production. It is suggested that such instabilities play a role in the fragmentation of interstellar clouds and in the formation of protostellar objects.

Glassgold, A. E.↗

NASA NTRS1993

In situ measurements of the ClO/HCl ratio: Heterogeneous processing on sulfate aerosols and polar stratospheric clouds

Simultaneous in situ measurements of stratospheric ClO and HCl have been made for the first time, during numerous flights of the ER-2 aircraft covering latitudes 24-90 deg N from October 1991 through March 1992. The ClO/HCl ratio is identified as a key indicator of heterogeneous processing both outside and within the Arctic polar vortex. For ClO mixing ratios below about 120 pptv, remarkably constant ClO/HCl values of about 15% characterize the lower stratosphere. The observed values are significantly higher than those derived from a 2-D model using either gas phase photochemistry alone (2%), or including heterogeneous sulfate chemistry (5-10%). During the Arctic early spring, after conversion of HCl into reactive chlorine has taken place, the vortex edge is poorly defined by ClO levels. Loss of HCl and its slow recovery following low-temperature polar heterogeneous chemistry distinguishes HCl as a new and unique dynamical tracer of polar stratospheric clouds (PSC)-processed air.

Webster, C. R.↗

NASA NTRS1993

In Situ Measurements of the ClO/HCl Ratio: Heterogeneous Processing on Sulfate Aerosols and Polar Stratospheric Clouds

Simultaneous in situ measurements of stratospheric ClO and HCl have been made for the first time, during numerous flights of the ER-2 aircraft covering latitudes 24-90 deg. N from October 1991 through March 1992. The ClO/HCl ratio is identified as a key indicator of heterogeneous processing both outside and within the Arctic polar vortex. For ClO mixing ratios below about 120 pptv, remarkably constant ClO/HCl values of about 15% characterize the lower stratosphere. The observed values are significantly higher than those derived from a 2-D model using either gas phase photochemistry alone (2%), or including heterogeneous sulfate chemistry (5-10%). During the Arctic early spring, after conversion of HCl into reactive chlorine has taken place, the vortex edge is poorly defined by ClO levels. Loss of HCl and its slow recovery following low-temperature polar heterogeneous chemistry distinguishes HCl as a new and unique dynamical tracer of PSC-processed air.

Webster, C. R.↗

NASA NTRS1993

In Situ Measurements of the ClO/HCl Ratio: Heterogeneous Processing on Sulfate Aerosols and Polar Stratospheric Clouds

Webster, C. R.↗

NASA NTRS1973

Experimental interstellar organic chemistry - Preliminary findings

Review of the results of some explicit experimental simulation of interstellar organic chemistry consisting in low-temperature high-vacuum UV irradiation of condensed simple gases known or suspected to be present in the interstellar medium. The results include the finding that acetonitrile may be present in the interstellar medium. The implication of this and other findings are discussed.

Khare, B. N.↗

NASA NTRS1991

Nitric oxide in star-forming regions - Further evidence for interstellar N-O bonds

Nitric oxide has been newly detected toward several star-forming clouds, including Orion-KL, Sgr B2(N), W33A, W51M, and DR21(OH) via its J = 3/2-1/2 transitions near 150 GHz, using the FCRAO 14 m telescope. Both lambda-doubling components of NO were observed toward all sources. Column densities derived for nitric oxide in these clouds are 10 to the 15th-10 to the 16th/sq cm, corresponding to fractional abundances of 0.5-1.0 x 10 to the -8th, relative to H2. Toward Orion-KL, the NO line profile suggests that the species arises primarily from hot, dense gas. Nitric oxide may arise from warm material toward the other clouds as well. Nitric oxide in star-forming regions could be synthesized by high-temperature reactions, although the observed abundances do not disagree with values predicted from low-temperature, ion-molecule chemistry by more than one order of magnitude.

Ziurys, L. M.↗

NASA NTRS1993

Are crystalline C-(H-O-N) carbons the elusive meteoritic carbynes?

I present an internally consistent reinterpretation of carbyne diffraction data making a few plausible assumptions. The results support that carbynes could be crystalline, randomly interstratified (or mixed-layered) carbons with variable C/(C+H+O+N) ratios rather than thermodynamically stable carbon allotropes. The metastable carbynes are likely the result of incomplete, kinetically-inhibited, low-temperature pyrolysis of precursor material. A renewed interest in meteoritic carbynes should seek to combine light-element chemistry and crystallography of these elusive carbons.

Rietmeijer, Frans J. M.↗

NASA NTRS1977

Annual Conference on Nuclear and Space Radiation Effects, 14th, College of William and Mary, Williamsburg, Va., July 12-15, 1977, Proceedings

Topics related to processing and hardness assurance are considered, taking into account the radiation hardening of CMOS technologies, technological advances in the manufacture of radiation-hardened CMOS integrated circuits, CMOS hardness assurance through process controls and optimized design procedures, the application of operational amplifiers to hardened systems, a hard off-the-shelf SG1524 pulse width modulator, and the gamma-induced voltage breakdown anomaly in a Schottky diode. Basic mechanisms are examined, giving attention to chemical and structural aspects of the irradiation behavior of SiO2 films on silicon, experimental observations of the chemistry of the SiO2/Si interface, leakage current phenomena in irradiated SOS devices, the avalanche injection of holes into SiO2, the low-temperature radiation response of Al2O3 gate insulators, and neutron damage mechanisms in silicon at 10 K. Other subjects discussed are related to radiation effects in devices and circuits, space radiation effects, and aspects of simulation, energy deposition, and dosimetry.

Stahl, R. H.↗

NASA NTRS1994

Laser induced fluorescence measurements and modeling of nitric oxide in high-pressure premixed flames

Laser-induced fluorescence (LIF) has been applied to the quantitative measurement of nitric oxide (NO) in premixed, laminar, high-pressure flames. Their chemistry was also studied using three current kinetics schemes to determine the predictive capabilities of each mechanism with respect to NO concentrations. The flames studied were low-temperature (1600 less than T less than 1850K) C2H6/O2/N2 and C2H6/O2/N2 flames, and high temperature (2100 less than T less than 2300K) C2H6/O2/N2 flames. Laser-saturated fluorescence (LSF) was initially used to measure the NO concentrations. However, while the excitation transition was well saturated at atmospheric pressure, the fluorescence behavior was basically linear with respect to laser power at pressures above 6 atm. Measurements and calculations demonstrated that the fluorescence quenching rate variation is negligible for LIF measurements of NO at a given pressure. Therefore, linear LIF was used to perform quantitative measurements of NO concentration in these high-pressure flames. The transportability of a calibration factor from one set of flame conditions to another also was investigated by considering changes in the absorption and quenching environment for different flame conditions. The feasibility of performing LIF measurements of (NO) in turbulent flames was studied; the single-shot detection limit was determined to be 2 ppm.

Reisel, John R.↗

NASA NTRS1976

Chemical abundances in the atmospheres of the giant planets and their satellites

Recent results on the composition and structure of the atmospheres of Jupiter, Saturn, Uranus, Neptune, Pluto, and their satellites are summarized with an orientation toward topics of particular interest to the subject of exobiology. The need for an accurate Jovian temperature profile is noted, and current values are given for the known H2, NH3, and CH4 abundances of each planet as well as Titan and Triton. Trace constituents and chromophores in the Jovian atmosphere are discussed, the role of comets as a link between chemical evolution in the solar system and the chemistry of the interstellar medium is examined, and some features in the IR spectrum of Titan are interpreted. The hope is expressed that Titan will remain a useful proving ground for theories of low-temperature abiogenic organic-compound production

Owen, T.↗

NASA NTRS1982

High density circuit technology, part 3

Dry processing - both etching and deposition - and present/future trends in semiconductor technology are discussed. In addition to a description of the basic apparatus, terminology, advantages, glow discharge phenomena, gas-surface chemistries, and key operational parameters for both dry etching and plasma deposition processes, a comprehensive survey of dry processing equipment (via vendor listing) is also included. The following topics are also discussed: fine-line photolithography, low-temperature processing, packaging for dense VLSI die, the role of integrated optics, and VLSI and technology innovations.

Wade, T. E.↗

NASA NTRS1987

Characterization of the LTC catalyst: Performance against common air pollutants

One of the important qualities of the Low-Temperature Catalyst (LTC) is the rapid oxidation of carbon monoxide to carbon dioxide under a wide variety of conditions. The catalytic material is a palladium-copper activated complex which reacts with various contaminant molecules through a continuous oxidation/reduction cycle. The alumina substrate enhances LTC activity with its favorable surface chemistry and very high surface area. About 10 percent surface water is necessary to facilitate the oxidation of CO. This reaction shows a log-log dependence on contact time, suggesting a Langmuir-Hinshelwood mechanism. In the tube tests, LTC removed 90 to 100 percent of contaminating carbon monoxide in the temperature region of 20 to 4000 C, and at ambient over a range of 25 to 65 percent relative humidity. In contrast, NO2 is chemisorbed by the LTC/alumina material--the amount strongly dependent on temperature increases but independent of humidity. The LTC catalyst has demonstrated excellent capability to remove an important variety of hazardous pollutant gases which are common factors to poor indoor air quality. The Instapure Air Filtration System incorporates the LTC catalyst in a 50:50 mixture with activated carbon to effectively remove particulate, odors, and hazardous gases at room temperature and humidities. The ability to remove hazardous gases is unique for the category of portable air filtration equipment. The wide variety of pollutant gases that LTC removes suggests that catalytic technology is adaptable to a considerable range of commercial and industrial applications.

Collins, Marcia F.↗

NASA NTRS2026

List of Commercial and Advanced Developmental Niobium-Based Alloys of the Space Age

This report compiles a list of commercial and developmental niobium-based alloys developed during the Space Age (late 1950s through mid-1970s) for extreme-temperature applications, including rocket engine thrust chambers, hypersonic re-entry thermal protection systems, and space fission reactor loops. Niobium (Nb) was widely pursued because it provided the lowest density (~8.6 g/cc) among the primary refractory metals, a high melting temperature (~2470°C), exceptional low-temperature ductility, good formability, and compatibility with liquid alkali metals. An evaluation of physical metallurgy mechanisms, focusing on solid-solution strengthening via heavy refractory solutes (W, Mo, Ta), dual-purpose reactive solutes (Hf, Zr, Ti), and dispersion strengthening using carbides, nitrides, and oxides is presented. Additionally, the report compares Western and Soviet Union metallurgical approaches, explaining how supply chain factors and manufacturing infrastructure influenced element selection, interstitial chemistry, and alloy identification/naming conventions. Cataloging these historical alloy chemical compositions serves as a foundational reference for modern alloy additive manufacturing, thermodynamic CALPHAD modeling, and machine-learning discovery pipelines for next-generation extreme-environment niobium-based alloys.

Physical Metallurgy↗

NASA NTRS1973

Volatile element chemistry of selected lunar, meteoritic, and terrestrial samples

Using vacuum pyrolysis and high resolution mass spectrometry, a study is made of the gas release patterns of representative lunar samples, meteorites, terrestrial samples, and synthetic samples doped with various sources of carbon and nitrogen. The pyrolytic gas evolution patterns were intercorrelated, allowing an assessment of the possible sources of the volatilizable material in the lunar samples to be made. Lightly surface adsorbed species and more strongly chemisorbed species are released from ambient to 300 C and from 300 to 500 C, respectively. The low-temperature volatiles (less than 500 C) derived from various chondrites correlate well with the gas evolution patterns of volatile-rich samples, as for example 74220 and 61221. Solar wind entrapped species and molecules derived from reactions probably in the grain surfaces are evolved from about 500 to 700 C, respectively. Solar wind implanted C, N, and S species are generated from 750 to 1150 C, probably by reaction with the mineral matrix during the annealing process. Possible indigenous and/or refractory carbide, nitride, and sulfide C, N, and S are released in the region from 1200 C to fusion.

Simoneit, B. R.↗

NASA NTRS1988

Low temperature safety of lithium-thionyl chloride cells

The use of lithium thionyl chloride cells for low-temperature applications is presently restricted because of their unsafe behavior. An attempt is made in the present investigation to identify the safe/unsafe low temperature operating conditions and to understand the low temperature cell chemistry responsible for the unsafe behavior. Cells subjected to extended reversal at low rate and -40 C were found to explode upon warm-up. Lithium was found to deposit on the carbon cathodes during reversal. Warming up to room temperature may be accelerating the lithium corrosion in the electrolyte. This may be one of the reasons for the cell thermal runaway.

Subbarao, S.↗

NASA NTRS1994

Hydrogen and related materials at high density: Physics, chemistry and planetary implications

Recent studies of low-Z molecular materials including hydrogen to multimegabar pressures (less than 300 GPa) have uncovered a range of phenomena relevant to understanding the nature of the interiors of the outer planets and their satellites. Synchrotron x ray diffraction measurements (to 42 GPa) have been used to determine the crystal structure of the solid (hexagonal-close packed) and equation of state. Sound velocities in fluid and solid hydrogen (to 24 GPa) have been inverted to obtain elastic constants and aggregate bulk and shear moduli. In addition, an improved intermolecular potential has been determined which fits both static and shock-wave data. Use of the new potential for the molecular envelope of Jupiter suggests the need for major revisions of existing Jovian models or a reanalysis of reported free oscillations for the planet. Studies at higher pressures (greater than 100 GPa) reveal a sequence of pressure-induced symmetry-breaking transitions in molecular hydrogen, giving rise to three high-pressure phases (1, 2, and 3). Phase 1 is the rotationally disordered hcp phase which persists from low pressure to well above 100 GPa at high temperature (e.g., 300 K). Phase 2 is a low-temperature, high-pressure phase (transition at 100 GPa and 77 K in H2) with spectral features indicative of partial rotational ordering and crystallographic distortion. The transition to Phase 3 at 150 GPa is accompanied by a weakening of the molecular bond, gradual changes in orientational ordering, strong enhancement of the infrared intramolecular vibrational absorption, and strong intermolecular interactions similar to those of ambient-pressure network solids. Studies of the phase diagram reveal a triple point near 130 K and 160 GPa. Higher pressure measurements of vibrational spectra place a lower bound of approximately 250 GPa on the predicted transition pressure for dissociation of molecular hydrogen to form a monatomic metal.

Hemley, R. J.↗