Search NASA⌕ Search

SEARCH · Search NASA

Results for “MSW recycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thermomechanical Separation of Biogenic and Non-biogenic Carbon from Non-Recyclable MSW

The effective separation of biogenic and non-biogenic carbon from non-recyclable municipal solid waste (n-MSW) presents a significant challenge in the United States. Currently, there are no efficient methods available to address this issue, hindering the potential for maximizing waste utilization and reducing landfilling rates. This project aims to develop and implement a combine thermomechanical separation techniques to separate biogenic and non-biogenic carbon within n-MSW, ultimately facilitating greater resource recovery and enhancing the efficiency and environmental impact of waste management practices.

09 - BIOMASS FUELS↗
DOE OSTI2025

Upconversion of non-recycled MSW paper fractions into biochar via slow pyrolysis and life cycle analysis: Pathways to net negative GHG emission

This study presents an integrated and sustainable approach to valorizing non-recycled municipal solid waste (MSW), a heterogeneous and underutilized waste stream destined for landfilling, by converting it into valuable biochar resources. Specifically, we investigated the upcycling of nonrecycled paper waste based on compositional analysis into four major fractions: high cellulose, high lignin, high contamination, and high ash content papers. These fractions were then homogenized and subjected to slow pyrolysis. The high cellulose fraction (36.1 %) was the most abundant, and contained 66.7 % cellulose, while the high lignin fraction showed the highest lignin (12.1 %) and carbon content (44 %), resulting in highest energy value of 17.4 MJ kg −1 . Biochar yields ranged from 25.6 % to 35.6 %, with the high ash fraction producing the highest yield and alkalinity (pH ≈ 11.2) due to its higher mineral content. Elemental analysis revealed enhanced carbon content up to 76.9 % and reduced oxygen and hydrogen, confirming effective carbonization. The high lignin-derived biochar showed the highest aromatic carbon content (82.8 %) and greater structural stability, while contaminated and ash-rich fractions exhibited dense, low-porosity surfaces due to the presence of contaminants and minerals. Spectroscopic analysis revealed degradation of carbohydrates, disappearance of cellulose peaks and formation of aromatic and mineral derived phases. The scaled life cycle process yielded a global warming potential (GWP) of 119.3 kg CO 2 -eq per ton of dry paper waste, offset by soil carbon sequestration of − 556.41 kg CO 2 -eq, resulting in a net impact of − 427.36 kg CO 2 -eq. This represents a net carbon removal exceeding by ~186 % the emissions associated with landfilling paper waste with electricity generation.

09 BIOMASS FUELS↗
DOE OSTI2023

Chapter Four—MSW characterization and preprocessing for biofuels and bioproducts

The organic fraction of MSW (OFMSW) has a high carbohydrate and lipid content, indicating its good potential as a feedstock for bioethanol and biodiesel production. However, variability in feedstock composition for MSW is a critical challenge for downstream conversion processes such as pyrolysis, gasification, incineration, and biotechnological conversion. MSW characterization is critical to inform and optimize the design of physical handling processes to minimize costs and environmental impacts, and improve the downstream conversion performance of MSW materials. Here, this book chapter focuses on current MSW characterization and preprocessing technologies and discusses the costs, benefits, and environmental impacts associated with MSW preprocessing. Also, the book chapter outlines the potential strategies to increase total revenue and mitigate negative environmental impacts for MSW recycling systems.

09 BIOMASS FUELS↗
DOE OSTI2022

Life cycle analysis of gasification and Fischer-Tropsch conversion of municipal solid waste for transportation fuel production

Non-recyclable municipal solid waste (MSW) can be used as feedstock for liquid fuel production via gasification followed by Fischer-Tropsch (FT) processes. Given the heterogeneity of MSW material composition and variation in material properties, its convertibility to liquid hydrocarbon fuels could vary widely, affecting the sustainability of utilizing non-recyclable MSW for fuel production. This study evaluates the life cycle greenhouse gas (GHG) emissions (carbon intensities [CIs]) of FT fuels from non-recyclable MSW. Key issues that could greatly affect the CIs were examined, including fossil carbon content of the MSW, emission implications of diverting non-recyclable MSW from landfills to fuel production, and conversion efficiency. Results show that the CIs of fuels produced from various waste streams range 80–105 gCO2e/MJ, which may exceed the CI of petroleum fuels. Higher fossil carbon content in the MSW feedstock tends to incur higher GHG emissions as biogenic carbon emissions are considered carbon neutral. Meanwhile, diverting different fractions of non-recyclable MSW, such as food waste and low-quality paper, from landfills may result in GHG emissions that may include the potential avoidance of methane emissions and potential sequestration of biogenic carbon that is foregone. To reduce GHG emissions, a carbon capture and sequestration option in the fuel production stage is considered, which could reduce the CI by 53–64 gCO2e/MJ. Carbon fates of different non-recyclable MSW in landfills are further evaluated to determine how they vary and impact the CIs of MSW-derived fuels.

02 PETROLEUM↗
DOE OSTI2022

Challenges and Opportunities Associated with the Municipal Solid Waste

Municipal solid waste (MSW) is one of the important challenges in today’s world. A continuous surge in population, increasing living standards, and rapid urbanization are generating an enormous quantity of MSW. Improper management of this MSW often leads to the release of greenhouse gases, emission of particulate matters, and formation of dioxins, which all ultimately contributes to climate change. Recycling these wastes via landfills with gas recovery and/or energy and material production via thermal and chemical conversions could be viable options to manage these challenges. Recycling of MSW is difficult because it is very heterogeneous in nature. The heterogeneity of MSW varies significantly from country to country and from one municipality to another. Such variation depends mainly on the waste management regulations and industrial structure of each region. The quantity and the quality of MSW are critical for determination of the handling and management. This presentation will discuss the statistics (e.g., source, quantity, quality, etc.) of MSW following by the current state-of-the-art technologies for handling those wastes. The key challenges handling those wastes and possible improvements of the handling processes will be discussed further. Finally, the potential opportunities for MSW, especially the contributions to the bio-energy field, will be discussed.

09 BIOMASS FUELS↗
DOE OSTI2023

Advanced biorefinery feedstock from non-recyclable municipal solid waste by mechanical preprocessing

Because of accelerated urbanization and the development of a global economy, a large quantity of municipal solid waste (MSW) has been collected and disposed of by the municipalities. Due to this drastic increase in the disposal of MSW, the need for its management is a must to preserve the environment. Currently, approximately 50% of the total MSW generated in the United States has been utilized through various recycling, combustion, and composting technologies, which means the remaining 50% is sent to landfill; this is often known as non-recyclable MSW (nMSW). As this nMSW is physically and chemically heterogenous and contains very high amounts of inorganic material, processing is required prior to using it as a biorefinery feedstock. Thus, this study focused on how mechanical preprocessing advanced the physical and chemical properties of nMSW. The physical and chemical properties were investigated in terms of particle size distribution, bulk density, ultimate and proximate analysis, and the higher heating value (HHV). The combustion properties were examined in terms of ignition temperature, peak heat release rate, and combustion efficiency. Results showed that the variability of physical and chemical properties of nMSW can be reduced by mechanical preprocessing. For example, the variability of the bulk density of the as-received nMSW was approximately 17.3% while it reduced to 5.8% when the sample size was reduced to 2 mm. Similarly, the variability of ash and HHV reduced from 49.2% to 11.0% and 13.4%–4.2%, respectively. Combustion thermograms showed that the size reduction positively improved the combustion properties. For example, 2 mm of spec sample started to ignite approximately 4 times earlier and took 6.5 folds less time to reach the peak heating rate compared to as-received nMSW. Overall, the mechanical preprocessing reduced the variability of physical and chemical properties in addition to the improvement of combustion behavior of the nMSW which is one step forward toward the biorefinery feedstock.

09 BIOMASS FUELS↗
DOE OSTI2023

Evaluation of mixed #3–7 plastic waste from material recovery facilities (MRFs) in the United States

Plastic recycling rates are still low in the United States (U.S.), with less than 10% of municipal solid waste (MSW) plastic being recycled. Most unrecycled plastics are identified by Resin Identification Codes (RIC) from #3–7, which are commonly destined for landfill or waste-to-energy facilities (WTE). Therefore, the composition and quality of outbound bales containing #3–7 plastics were assessed to understand the potential to increase recycling rates. Three bales were sourced from three different Material Recovery Facilities (MRFs) located in the United States. Each bale was manually sorted and characterized for quality and performance via multiple plastic characterization techniques. Considerable differences in bale composition were observed between MRFs, which correlated with the technology used by each MRF in the sorting process. The differences were substantial in the residual levels of poly(ethylene terephthalate) (PET) and high-density polyethylene (HDPE), which are highly desired for mechanical recycling processes and not expected in #3–7 plastics bales. Traditional recycling processes including washing, extrusion, and injection molding of the sorted material were employed prior to the physical, thermal, and molecular characterization. Despite differences in bale composition by plastic type, some polymer properties were similar across MRFs. Here, this research suggests that landfill-diverted mixed plastic waste can be utilized in the mechanical recycling of currently unrecycled materials, as processes can be designed to work with consistent polymer properties. It also highlights the need to upgrade the sorting systems to prevent waste feedstocks, which can be recycled with current technologies, from contaminating other plastic streams or reach landfills.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Decontamination Strategies to Increase Fuel and Product Conversion Yields of Municipal Solid Waste

Since the implementation of China’s Green Fence and National Sword policies, many areas lost a market for heavily contaminated municipal solid waste (MSW). Approximately 17.2 million tons of paper and 26.9 million tons of plastic were landfilled in the United States in 2018. This non-recyclable waste that would normally be landfilled can be converted into fuels and chemicals, but common contaminants that are present in non-recyclable waste can negatively affect low and high-temperature conversion yields. In addition, MSW is a heterogeneous feedstock whose composition can vary widely across geographical areas and socio-economic statuses. This presents a unique challenge for providing a consistent feedstock to biorefineries around the world. Techniques that are commonly used in other industries, in addition to pre-processing methods used for traditional biomass, can be used to increase conversion yields. Drawing on established techniques, as well as experimental decontamination strategies, non-recyclable MSW could represent a viable alternative to agricultural residues for biofuel production. Although many of the techniques explored in this chapter have been used extensively in other industries, the feedstock composition needs to be carefully considered when choosing prospective decontamination methods. It is likely that there is not a “one-size-fits-all” decontamination method for MSW. In conclusion, a pre-processing and decontamination plan will rely heavily on the composition of the individual waste stream.

09 BIOMASS FUELS↗
DOE OSTI2026

Spatial and temporal characterization of municipal solid waste based on resource recovery pathways

This study presents a two-year, quarterly assessment of MSW across four source sectors (residential, schools, restaurants, and grocery stores) from sixteen sites across five U.S. states. MSW was manually sorted into 27 categories and aggregated into pathway fractions: high-moisture (HM) organics, low-moisture (LM) organics, recyclable (RC) materials, and residuals for disposal. Organics represented 89 % of the MSW stream. The largest fraction was HM organics consisting of food waste (31 %) and yard waste (3 %), with large coefficient of variations (CV), 79 and 278 %, respectively, reflecting high seasonal and site variability that varied significantly (p < 0.01) across sampling periods. The HM fraction showed properties favorable for anaerobic digestion, with moisture content ranging from 56 to 95 % and volatile solids ranges of 86-95 %. In contrast, the LM and RC fractions remained more stable (plastics CV = 41 %; paper CV = 53 %) with heating values up to 26.9 MJ/kg across sources, reflecting suitability for gasification. Microstructural analysis revealed less porosity in residential waste sampled at the landfill, which can influence preprocessing efficiency and microbial accessibility. Pathway informed allocations showed that 35 % of MSW is suitable for anaerobic digestion, 36 % for gasification, and 18 % for recycling, leaving 11 % requiring landfill disposal. These results provide quantitative evidence to determine feedstock allocation, waste-to-energy system design, and the development of data-driven sustainability and resource recovery strategies within a circular bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2024

Waste management strategies for military-generated waste in the United States

Sustainable and energy efficient municipal solid waste (MSW) management is vital for the health and performance of deployed soldiers, as they play an important role in the safety and dignity of a country. As the United States targets net-zero carbon-free emission goals, research and development are essential to surpassing current practices for management of MSW at military installations, both at home and abroad. To achieve this, it is important to act upon and implement the policies and instructions set by government agencies such as the Environmental Protection Agency (EPA), the Department of Energy (DOE), and the Department of Defense (DoD). Understanding the composition of waste and disposal methods that are in use at military installations is a crucial step to success. Here, the authors show this through analyzed data from trusted sources, such as government agencies, reports, magazines, journals, and other publications on MSW management techniques. By defining these challenges, possible solutions can be better understood for improved management of MSW at military installations in the United States. Finally, an integrated approach with deployable units capable of waste-to-energy technology using waste reduction, diversion, and recycling strategies shows to be an effective pathway for MSW conversion into energy and other useful products.

09 BIOMASS FUELS↗
DOE OSTI2026

A systematic analytical framework for multi-source municipal solid waste characterization for energy recovery

Advancing municipal solid waste (MSW) management from disposal-oriented practices toward circular, value-driven systems requires standardized methodologies capable of identifying material composition and resource recoverable potential at the point of generation. Despite extensive research, MSW characterization remains fragmented due to inconsistences in sampling methodologies, waste sorting categories, and temporal coverage across previous studies which limit cross-site comparability, reproducibility, and constrain the reliable evaluation of potential resource recovery pathways. This lack of consistency has hindered the development of a unified framework for MSW characterization and resource assessment. This study introduces a standardized, field-validated protocol for MSW sampling and composition analysis that ensures consistent, traceable data across diverse waste sources. The protocol integrates randomized spatial sampling, systematic material sorting, and controlled subsampling for multi-site and multi-season field campaigns. Validation included MSW collection from residential, grocery, restaurant, and school MSW streams across five U.S. states, including Maryland, Idaho, Virginia, Ohio, and Mississippi, to demonstrate the protocol’s ability to identify source-based composition patterns relevant to resource recovery applications. Grocery and restaurant streams were dominated by food waste and high-moisture organics, while school waste contained higher paper content and residential waste showed greater heterogeneity. Aggregation into energy-relevant fractions highlighted practical recovery pathways via anaerobic digestion or gasification, supporting data-driven planning, policy, and circular economy strategies for sustainable waste management across waste sources.

09 BIOMASS FUELS↗
DOE OSTI2024

Revolutionizing Waste Management: AI-Powered Real-Time Characterization for Efficient Handling of Non-Recyclable Municipal Solid Waste

According to EPA, -300 MM tons of municipal solid waste (MSW) was available in the US as of 2018. Of that total material, nearly 50% was landfilled resulting in a significant loss for the potential to convert its energy value into cost effective and sustainable biofuels. Redirecting this material away from the landfill and into conversion ready feedstock for energy generation can directly address DOE's selling price < $2.50/GGE while securing the US national energy independence [1]. However, the paramount challenges in any rational fuel conversion strategy are understanding the chemical makeup, quality and associated calorific value of the MSW. Understanding these parameters is critical in achieving any acceptable fuel conversion and requires rapid characterization followed by accurate separation technologies. Therefore, we are proposing to address the rapid characterization by building a non-invasive, rapid, and highly accurate Artificial Intelligence (AI)-enabled spectrometric/optical approach augmented with multi-sensory information for advanced characterization of domestic heterogeneous MSW. North Carolina State University (NCSU) and the National Renewable Energy Laboratory (NREL), in partnership with strong support from the Town of Cary and IBM, Inc., will closely work together to implement this ground-breaking technology for the effective characterization of MSW for sustainable and affordable production of conversion-ready feedstocks, while solving the environment issue of planetary proportions.

artificial intelligence↗
DOE OSTI2025

Techno-economics of hydrocarbon fuel production and recyclables recovery from landfill-destined municipal solid waste: AI-enhanced materials recovery facility design

Sustainable aviation fuels (SAF) production from cellulosic paper fractions of municipal solid waste (MSW) destined for landfills has strong potential to advance environmental, social, and economic sustainability across the aviation and waste sectors. This study proposes an artificial intelligence-enabled material recovery facility (AI-MRF) design to efficiently characterize, separate, process, and convert recovered paper waste from MSW into intermediate chemicals and SAF. The AI-MRF, designed to process 233,091 metric tons of MSW annually, integrates smart manufacturing technologies including AI, visual and hyperspectral imaging, multi-sensor data, and traditional sorting systems. Well-characterized and sorted cellulosic paper waste was utilized for chemical and fuel production scenarios, while clean plastics, metals, and glass were considered for recycling. Conversion of paper waste into intermediate sugars achieved a net present value (NPV) of up to $\$67$ million. For sugar-to-SAF production scenarios, the minimum fuel selling price (MFSP) was calculated at $\$6.11$ per gasoline gallon equivalent (GGE) when excluding recyclable revenue, and $\$4.03$ per GGE when halving recyclable revenue. The MFSP was further reduced to $\$1.96$ per GGE when accounting for SAF sales and recyclables. Nationally, this approach could yield about 2 billion GGE of hydrocarbon fuel annually from available MSW in the United States.

09 BIOMASS FUELS↗
DOE OSTI2024

Mechanical and biochemical recovery of landfill waste in an underserved community

Historically in the United States, waste collected for recycling has been sold and shipped to processors in China. In 2013 and 2018, China introduced the Green Fence and National Sword policies which restricts the import of contaminated materials and banned the import of many recyclables. The cost of recycling in the United States has increased following these policy changes, which has led to many communities reducing their recycling programs or halting them altogether. Rural and underserved communities that don’t have resources to afford sophisticated recycling programs have been heavily impacted. Previous work at INL demonstrated that MSW is a potentially viable feedstock for both biochemical and thermochemical conversion. The goal of this project is to assess preprocessing tools that can produce consistent feedstocks that meet conversion specifications, remove problematic contaminants, and reduce the amount of waste that is landfilled. Municipal solid waste was collected from an underserved community in southeast Idaho, contaminants were characterized, and mechanically separated into two discrete fractions. The unit operations identified during mechanical separation trials will be mobilized to on-site with a goal of 50% recovery of paper and plastic waste.

09 - BIOMASS FUELS↗
DOE OSTI2022

Price response of waste resources under demand shocks: four case studies

To quantify potential price changes of waste feedstocks that may be caused by increased demand, this study explored four case studies: 1) recyclable materials at local waste collection and recycling facilities in seven US states, 2) recyclable materials on internationally traded markets, 3) a wood-powered plant in Reading, PA, and 4) an MSW-powered plant in Tulsa, OK. The four case studies provided a total of ninety-one waste material price observations yielding twenty-seven price-supply relationships expressed as price elasticity of supply (PES) and unit price change with change in demand. For the two case studies related to recyclable materials with a global market shock, price changes vary widely from $0.08-$7.84 per ton with each percent change in demand. For the two case studies related to local market shocks in biomass used for energy, observed price changes range from $0.08-$0.23 per ton per percent change in demand. Based on these results, a base range of $0.10-$0.20 per ton per percent change in demand is recommended for local market shocks. I.e., for a facility that collects organic wastes on the order of 200,000-400,000 tons per year at price near zero, a doubling of demand could increase procurement prices by about $10.00-$20.00 per ton. Actual price changes with respect to change in demand may be non-linear. Shocks with broader geographic extent may increase price response due to a reduced opportunity for surrounding markets to mitigate localized market changes.

09 BIOMASS FUELS↗
DOE OSTI2023

Virgin-like High-Density Polyethylene from Recycled Mixed Polyolefins

Reported herein is the compatibilization of mixed polyolefins containing a rheology modifier (M-PO RM ) derived from municipal solid waste (MSW) by using different types of compatibilizers. One compatibilizer was produced “in situ” during reactive extrusion (REX), and the other compatibilizers were commercial styrenic block copolymer and maleated polymer-based compatibilizers. Both “in situ” and commercial compatibilizers were first used in laboratory-controlled polyolefins containing a rheology modifier (denoted as L-PO RM ) and were investigated for their mechanical properties. The study was then extended to a rheology modifier containing recycled mixed polyolefins (M-PO RM ), where the effects of both compatibilizers were evaluated. Compared to the in situ and other commercial compatibilizers, the styrenic block copolymer offered superior performance, as it enabled the synthesis of virgin-like high-density polyethylene (HDPE) from the M-PO RM . The findings suggest that M-PO RM can be transformed into blends with virgin HDPE-like properties, thus offering an industrially relevant approach for the re- and upcycling of mixed polyolefins. Finally, the M-PO RM pellets with uniform MFI and good mechanical properties can be used as injection mold feedstocks for different applications such as in the construction and automotive sectors.

compatibilization↗
DOE OSTI2022

Preprocessing of municipal solid waste towards thermal insulating material

Municipal solid waste (MSW) is one of the significant challenges in today’s world. A continuous surge in population, increasing living standards, and rapid urbanization are generating an enormous quantity of MSW. For example, the Environmental Protection Agency (EPA) reported that the total generation of MSW in the United States in 2018 was 292.4 million tons. Improper management of this MSW often leads to the release of greenhouse gases, emission of particulate matters, and formation of dioxins, which all ultimately contributes to climate change. Recycling these wastes via landfills with gas recovery and/or energy and material production via thermal and chemical conversions could be viable options to manage these challenges. Depending on the inherent chemical and structural properties of unrecycled wastes, the carbon structures can be tailored for processing and reuse in manufacturing of structural composites, building materials such as insulation, carbon dense reactant materials such as activated carbon, and so on. According to the EPA’s estimation, MSW in the United States is approximately 23% paper and paperboard, 12% plastics, 6% wood and 6% is textiles. Thus, this research focused on the feasibility of using the MSW as insulation material for the construction sector. The goal of this work was to determine the range of particle sizes, consolidation ratios, and component blends that can achieve insulation R-values within at least 70% that of traditional blown cellulose fiber. To achieve this goal, we designed the testing matrix based on five different component blends, three different particle sizes, and three different compaction level. An American Society for Testing and Materials (ASTM) method (C-739) was used to measure the R-value of the insulation material. Results showed that, adding more paper component in addition to smaller particle size and loose compaction made the insulation similar to the traditional blown cellulose fiber insulation as the R-value was within a range of 2.5-3.0 per inch.

42 ENGINEERING↗