Search NASA⌕ Search

SEARCH · Search NASA

Results for “Na metal oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unraveling the magnetic ground state in the alkali-metal lanthanide oxide Na 2 ⁢Pr⁡O 3

Here, a comprehensive set of muon spin spectroscopy and neutron scattering measurements supported by ab initio and model Hamiltonian simulations have been used to investigate the magnetic ground state of Na 2 ⁢PrO 3 . μSR reveals a Néel antiferromagnetic order below T N ~ 4.9K, with a small static magnetic moment m static ≤ 0.22 μ B /Pr collinearly aligned along the c axis. Inelastic neutron measurements reveal the full spectrum of crystal field excitations and confirm that the Pr 4+ ground-state wave function deviates significantly from the Γ 7 limit that is relevant to the Kitaev model. Single- and two-magnon excitations are observed in the ordered state below T N =4.6K and are well described by nonlinear spin wave theory from the Néel state using a magnetic Hamiltonian with Heisenberg exchange J=1 meV and symmetric anisotropic exchange Γ/J=0.1, corresponding to an XY model. Intense two magnon excitations are accounted for by g-factor anisotropy g z /g ± = 1.29. A fluctuating moment δm 2 = 0.57 ⁢(22) ⁢μ$^2_B$/Pr extracted from the energy and momentum integrated inelastic neutron signal is reduced from expectations for a local J = 1/2 moment with average g factor g avg ≈ 1.1. Together, the results demonstrate that the small moment in Na 2 ⁢PrO 3 arises from crystal field and covalency effects and the material does not exhibit significant quantum fluctuations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis of a planar, multicomponent catalytic surface of Na 2 CO 3 /MnO

Here, O 2 adsorption on MnO(100) precovered with sodium (Na) multilayers was investigated by X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD). Deposition of Na multilayers leads to a first monolayer of oxidic Na followed by metallic Na island growth. XPS results for the oxidation of the metallic Na islands indicate an incomplete oxidation of Na at 125 K. Oxidation at 350 K completely oxidizes the metallic islands producing a mixture of Na 2 O and Na 2 O 2 . Thermal evolution of the oxidation products was examined. After oxidation at 350 K and flashing to 750 K, Na 2 O and Na 2 O 2 are the primary oxides on MnO(100). After flashing to 850 K, a solid state reaction of Na 2 O 2 /Na 2 O and the MnO(100) substrate forms a NaMnO 2 -like surface compound which decomposes above 850 K. Oxygen exchange between CO 2 and Na oxides is observed. The strong interaction between CO 2 and Na oxide islands forms Na 2 CO 3 on MnO(100). Heating the Na 2 CO 3 covered MnO(100) surface to 600 K for 10 min drives oxidic Na in the first monolayer into the MnO subsurface, and produces a surface exposing islands of Na 2 CO 3 on MnO(100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning discharge voltage by Schottky electron barrier in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2

Recently, Mg doped Na metal oxide layered cathode compounds have attracted strong interest for Na-ion battery applications. We report a new type of asymmetric phase evolution between charge and discharge is found to show much-enhanced discharge voltage in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2 over the parent cathode compound. P2 solid solution is found to show an abnormal coexistence with O2-P2 two-phase reaction during discharge with simultaneous reduction of O, Ni, and Fe redoxes, distinct from the conventional P2-O2 two-phase reaction in the charge. Our analysis suggests that the P2 and O2 two-phase boundary forms a novel unidirectional Schottky barrier to impede electron and Na diffusions in discharge only, thus making the kinetically preferred P2 solid solution phase abnormally coexist with the two-phase region for high discharge voltage and low polarization. Our work demonstrates tuning dynamic evolution of electronic Schottky barrier as a new dimension for advanced kinetic design of high-performance battery cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Controlling Surface Phase Transition and Chemical Reactivity of O3-Layered Metal Oxide Cathodes for High-Performance Na-Ion Batteries

O3-layered metal oxides are promising cathode materials for high-energy Na-ion batteries (SIBs); however, they suffer from fast capacity fade. In this work, we develop a high-performance O3-NaNi 0.68 Mn 0.22 Co 0.10 O 2 cathode for SIBs toward practical applications by suppressing the formation of a rock salt layer at the cathode surface with an advanced electrolyte. The cathode can deliver a high specific capacity of ~196 mAh g –1 and demonstrates >80% capacity retention over 1000 cycles. NaNi 0.68 Mn 0.22 Co 0.10 O 2 –hard carbon full-cells with practical loading (>2.5 mAh cm –2 ) and lean electrolyte (~40 μL) demonstrate ~82% capacity retention after 450 cycles. A 60 mAh single-layer pouch cell has also been fabricated and demonstrated stable performance. This work represents a significant leap in SIB development and brings new insights to the development of advanced layered metal oxide cathodes for alkaline-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Tailoring P2/P3‐Intergrowth in Manganese‐Based Layered Transition Metal Oxide Positive Electrodes via Sodium Content for Na‐Ion Batteries

High-manganese content sodium-ion positive electrodes have received heightened interest as an alternative to contemporary Li-ion chemistries due to their high abundance, low toxicity, and even geographical distribution. However, these materials typically suffer from poor capacity, unstable cycling performance, and sluggish Na + kinetics. Herein, we explore a manganese-based layered transition metal oxide (Na x N 0.25 Mn 0.75 O 2 ) and show by X-ray diffraction (XRD) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) that careful variation of the sodium content can instigate the formation of a biphasic intergrowth. This intergrown P2/P3 material offered a higher capacity than its monophasic P2 counterpart due to the P3 structure having greater low-voltage Mn 3+/4+ redox. Further, the intergrowth material offers greatly enhanced kinetics and cycling stability when compared to single-phase P3 material, due to the stabilizing nature of the P2 structure, elucidated by galvanostatic intermittent titration technique (GITT) and operando synchrotron X-ray diffraction. These results highlight the beneficial effect that the intergrowth structure has on the electrochemical performance of high-manganese content positive electrode for future sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

A Dendrite-Resistant Sodium/Porous-Carbon Anode for Solid-State Batteries – Strategies and Challenges for Low-Pressure Operation

Sodium solid-state batteries (Na-SSB) have gained interest recently due to the abundance of Na over Li, but they still tend to fail due to dendrites under practical current densities and cycling capacities. To overcome this, Na-SSBs are frequently tested with impractically high applied pressure. In this work, a porous carbon interfacial layer is utilized in conjunction with Na-ß”-Al2O3 solid electrolytes to enable Na-cycling at milder cell pressures. This sodium/porous carbon layer enables improved solid-state Na cycling in symmetric cells, up to a current density of 10 mA cm-2 at 25 °C. Cycling up to 1 mAh cm-2 is challenging with low pressure, but 1 mAh cm-2 capacity can be reliably cycled at 1 mA cm-2 at an elevated temperature of 60 °C in symmetric cells. Finally, the evolution of the interface and sodium/carbon anode is evaluated with cryogenic ion-milling and cross-sectional imaging revealing that, depending on testing temperature, pressure, current density, and capacity, void formation, Na-extraction from porous carbon, delamination of the porous carbon matrix, or a combination of these occurs at the interface between Na-metal and BASE. Despite this, excellent dendrite resistance is achieved, and a full-cell design utilizing a Na-transition metal oxide cathode is still able to achieve an areal capacity of ~ 2.7 mAh cm-2 at 0.125 mA cm-2. This work demonstrates an alternative pathway toward a Na-metal anode for Na-SSBs without the requirement of excessive stack pressure.

low-cost↗
DOE OSTI2025

Probing Operando Electrochemical Strain Generation in α-NaFeO 2 Composite Cathodes during Cycling of Na-Ion Batteries

The transition metal oxide (TMO) cathodes in Na-ion batteries suffer from low-capacity retention. Chemo-mechanical instabilities lead to the deterioration of the electrochemical performance of TMO cathodes in Li-ion batteries. However, there is not much known about the chemo-mechanical instabilities in the TMO cathodes for Na-ion batteries. Understanding the governing forces behind the interplay between the electrochemical performance and mechanical stability in TMO cathodes is critical for the development of Na-ion batteries. Here, we synchronize the digital image correlation (DIC) technique with electrochemical analysis to capture the real-time deformation behavior of the α-NaFeO 2 cathodes during cycling. When the charge cutoff voltage is 3.6 V, the cathode experiences reversible deformations (except for the first cycle). There is negative strain (shrinkage) generation during Na extraction and positive strain (expansion) generation during the subsequent Na insertion. A detailed analysis of the potential-dependent strain rate evolution points out complicated phase transformations and nonequilibrium conditions in the α-NaFeO 2 cathodes during cycling. When the charge cutoff voltage was increased to 4.2 V, there was a rapid capacity loss and large plastic deformations in the α-NaFeO 2 cathodes. We provide an in-depth discussion about the possible mechanisms behind the chemo-mechanical instabilities in the α-NaFeO 2 . In conclusion, the correlation is critical to develop material-based strategies to mitigate instability mechanisms in TMO cathodes for Na-ion batteries.

Wable, Minal [University of Maryland Baltimore Cou↗
DOE OSTI2026

Data mining the missing ordered phases of Li/Na metal oxides

Data-driven discovery of Li-ion and Na-ion battery materials has been pioneered by generic materials data platforms such as the Materials Project. After decades of progress, it is timely to ask whether there remain underexplored compositional spaces. Here, in this work, we present a systematic data-mining effort to uncover missing ordered binary, ternary and quaternary Li/Na-containing metal oxides using high-throughput density functional theory (DFT). Building on 19,120 stable and metastable oxides entries from the Materials Project, we performed 13,245 additional calculations through isovalent substitutions of known ground states, experimentally reported compounds, and specific prototype structures. Our study identifies 36 new ground states within the GGA/GGA + U convex hull and 45 within the r 2 SCAN convex hull. Additionally, we identified 840 metastable compounds from GGA/GGA + U and 979 from r 2 SCAN that are absent in the present Materials Project databases. Moreover, we have tripled the metastable materials in compositional spaces with a molar ratio of cation/anion >1, highlighting the overlooked opportunities in this compositional space.

25 ENERGY STORAGE↗
DOE OSTI2022

First-principles comparative study of Cr migration in O3 and O/P hybrid-phased NaCrO 2

In layered Na transition-metal (TM) oxides, TM migration usually occurs at highly charged states and severely deteriorates the capacity and reversibility. Meanwhile, the formation of hybrid phases with the intergrowth of octahedral (O-type) and prismatic (P-type) Na layers also takes place at highly charged states. These hybrid phases are often more stable than simple O3 or P3 stackings. However, little is known about the mechanism and impact of TM migration in these hybrid phases. In this work, a comparative first-principles study is performed to understand the connections between structural changes and Cr migration in layered O3 and hybrid-phased NaCrO 2 . After Cr migration, the hybrid-phased NaCrO 2 suffers from greater layer shrinkage than the O3 phase. Three factors affect the Cr migration energy E mig : the Na concentration, local 3D configurations, and 2D in-plane geometries. Low Na concentrations and certain local 3D configurations facilitate the Cr migration. The Cr migration barriers in both O3 and hybrid-phased NaCrO 2 are positively correlated with the Cr E mig . The Cr migration in 17 doped O3 and hybrid-phased NaCrO 2 is surveyed. In these doped NaCrO 2 , a more uniform distribution of the Cr–O bond lengths usually suggests suppressed Cr migration. Optimal dopants for suppressing Cr migration are identified by considering E mig for both Cr and the dopant. Finally, our comparative study on Cr migration in O3 and hybrid-phased NaCrO 2 reveals the significant role of hybrid-phased structures in the development of layered cathode materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Preparation of: I. intercalative metal oxide/conductive polymer composites as electrode materials for rechargeable batteries; II. sodium rich manganese oxide hydrate with capacity for aqueous Na-ion electrochemical energy storage

The present invention is directed at intercalative metal oxide/conductive polymer composites suitable for use as electrode materials for rechargeable batteries. The composites can be prepared by agitation of the metal oxide and the conductive polymer in aqueous media. The present invention is also directed at a sodium rich layered manganese oxide hydrate prepared by annealing manganese (II, III) oxide and sodium hydroxide. The sodium rich manganese (III, IV) oxide so formed indicates an enhanced capacity for Na-ion storage suitable for the use of electrode materials for aqueous energy storage.

Xiaowei, Teng↗
DOE OSTI2022

Unravelling the Nature of the Intrinsic Complex Structure of Binary‐Phase Na‐Layered Oxides

Abstract The layered sodium transition metal oxide, NaTMO 2 (TM = transition metal), with a binary or ternary phases has displayed outstanding electrochemical performance as a new class of strategy cathode materials for sodium‐ion batteries (SIBs). Herein, an in‐depth phase analysis of developed Na 1− x TMO 2 cathode materials, Na 0.76 Ni 0.20 Fe 0.40 Mn 0.40 O 2 with P2‐ and O3‐type phases (NFMO‐P2/O3) is offered. Structural visualization on an atomic scale is also provided and the following findings are unveiled: i) the existence of a mixed‐phase intergrowth layer distribution and unequal distribution of P2 and O3 phases along two different crystal plane indices and ii) a complete reversible charge/discharge process for the initial two cycles that displays a simple phase transformation, which is unprecedented. Moreover, first‐principles calculations support the evidence of the formation of a binary NFMO‐P2/O3 compound, over the proposed hypothetical monophasic structures (O3, P3, O′3, and P2 phases). As a result, the synergetic effect of the simultaneous existence of P‐ and O‐type phases with their unique structures allows an extraordinary level of capacity retention in a wide range of voltage (1.5–4.5 V). It is believed that the insightful understanding of the proposed materials can introduce new perspectives for the development of high‐voltage cathode materials for SIBs.

Paidi, Anil K.↗
DOE OSTI2025

Stability Enhancement in Na 0.67 Fe 0.2 Mn 0.8 O 2 Positive Electrodes via Spherical Coprecipitated Hydroxide Precursor Synthesis for Na-Ion Batteries

Mn/Fe-based layered transition metal oxides (LTMOs) are promising positive electrode materials for sodium-ion batteries (SIBs) due to their high abundance, low cost, and stable price fluctuations. At commercial scale, the fabrication of these materials commonly employs coprecipitation of hydroxide precursors, which allows for the scalable synthesis of uniform, dense particles with a tunable morphology. However, the common chelating agent (ammonia) forms unstable complexes with Fe 2+ ions, resulting in uncontrollable particle morphology and poor electrochemical properties. Here, in this study, three chelation strategies (no chelation, ammonia, oxalate) for Fe/Mn-based hydroxides are evaluated. It was found that oxalate chelation produced uniform, dense spherical hydroxide particles while particles via ammonia / no chelate routes exhibited no morphological control. The LTMOs synthesized from the oxalate-chelated hydroxide precursor formed uniform spherical particles, while the other two LTMOs showed greater variation in particle morphology. The oxalate-chelated LTMO electrode exhibited increased cycling stability due to reduced parasitic reactions with the electrolyte, as characterized by static leakage current measurements and electrochemical impedance spectroscopy.

25 ENERGY STORAGE↗
DOE OSTI2021

Sensing and arresting metal corrosion in molten chloride salts at 800 degrees Celsius

Originally this was planned as a 5 task, 3 year project, starting in May 2019. Task 1 Detecting oxidants and metal corrosion in molten chloride salt at 800°C. Task 2 Effectiveness of Zr getter using head gas sensors of inlet and outlet gases. Task 3 Cathodic protection of metal in molten salt at reducing potential. Task 4 Find reduction potential of metals in molten chloride salts & quantum modeling. Task 5 Develop corrosion test sections integrated into molten salt flow loop. After Q4, the project was scaled back and the reorganized SOPO was reduced to 3 tasks to be completed at the end of Q7 on 01/05/2021. The 3 SOPO tasks are: Task 1 Sense oxidants and the metal corrosion in molten Na-K-Mg-Cl salt at 800°C. Task 3 Cathodically protect H230 alloy in molten Na-K-Mg-Cl salt at 800C by making H230 alloy the cathode of a power supply with a chromium-rich-metal as the anode. Task 4 Find the reduction potential of Cr metal in molten Na-K-Mg-Cl salt at 800°C. The total timeline was reduced from 12 to 7 quarters with the end date being, January 5, 2021. This amounted to task 1,3 and 4 being done in Q5,6 and 7 of an extended year 1, ending on January 5, 2021. Task 1, 3 and 4 were completed. For task1) the increase of oxidants in molten salt is detected by two things: i) a positive shift of the electrode potential for a Haynes 230 alloy (H230) metal coupon versus a silver/silver-chloride reference electrode (SSE) and ii) an increase in the corrosion rate of a H230 electrode at 800C. For task 3) applying a cathodic potential (negative overpotential) to a H230 electrode versus SSE arrested the corrosion of the cathodically protected H230 compared to an unprotected “spectator H230 electrode” in the same molten chloride salt. Lastly, for task 4) the reduction potential of chrome and chrome rich, and nickel metal electrodes were measured. The most valuable outcome of this work is that a power supply can arrest metal corrosion for metal in molten chloride salt when the power supply applies a cathodic potential to bare metal, like H230, in molten chloride salts, like ternary Mg-K-Na-chloride salt. H230 is a high strength metal for containing molten chloride salt and ternary Mg-K-Na-chloride salt is used as heat transfer fluids in concentrating solar power plants. When to use cathodic protection for protecting metal in molten chloride salts? Two scenarios are envisioned: 1) for protecting high-valued components, like solar collectors and heat exchangers and 2) for protecting the bare surface in holidays (point defects) of corrosion inhibitors that are to intended to cover the entire surface of metal.

14 SOLAR ENERGY↗
DOE OSTI2021

A layered nonstoichiometric lepidocrocite-type sodium titanate anode material for sodium-ion batteries

A lepidocrocite-structured sodium titanate prepared by ion-exchange of a Cs-containing precursor shows promise as an anode material for sodium ion batteries, with a discharge capacity of up to 229 mAh g -1 at an average potential of about 0.6 V vs. Na + /Na. Titanium vacancies in the metal oxide layers provide additional sites for sodium intercalation in addition to interlayer sites, which accounts for the higher capacity compared to other previously reported lepidocrocite-structured titanates. By screening a series of electrolyte formulations and binders, we were able to improve the first-cycle coulombic efficiency to 81.8% and 94.7% respectively using CMC/SBR-based and binder-free electrodes in ether electrolytes. Finally, the electrochemical consequences of short-term air-exposure on the electrodes are also discussed.

25 ENERGY STORAGE↗
NASA NTRS1973

Nighttime ion composition measurements at the geomagnetic equator

Two ion composition profiles, representative of the nighttime equatorial ionosphere between 90 km and 300 km, are presented. These profiles were obtained by two rocket-borne ion mass spectrometers on a single night for solar zenith angles of 112 deg and 165 deg. For both flights, the principal ion above 200 km is O(+). The downward drift of the atomic ions O(+) and N(+), coinciding with the postsunset lowering of the F2 peak, is observed through an enhancement of the density of O(+) at altitudes above 200 km and N(+) above 240 km. Below the drift region, O(+) and N(+) are observed in concentrations larger than expected. The NO(+) altitude distribution retains its shape throughout the night, and below 210 km, is the principal ion. The behavior of O2(+) can be explained by the O(+), electron density and theoretical neutral nitric oxide concentrations. Light metallic ions, including Mg(+), Na(+), and possibly Si(+), are observed to altitudes approaching 300 km and are affected by vertical drift.

Goldberg, R. A.↗
NASA NTRS1984

A final report on the extension of the MCSCF/CI method

For the period of July 1982 through January 1983, the research carried out focused on the nature of metal adsorbate bonding. Two main areas were investigated in detail: (1) the adsorption of CO on Al, Na, Mg and Ni; and (2) bonding in transition metal oxides, CuO, CrO and MoO. These theoretical studies have lead to a new understanding of CO-metal bonding as well as to a better understanding of the d involvement in the bonding in transition metal oxides. Four areas associated with cluster model studies are discussed in detail: hybridization and changing in cluster model studies, the adsorption of CO on metals (Al, Na, Mg), the adsorption of CO on Ni, and finally the use of effective core potentials (ECP) in cluster models.

Nelin, C. J.↗