SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thin films of nickel oxide (NiO x ), cobalt oxide (CoO x ) and nickel–cobalt oxide (NiCoO x ) produced integrated, protected Si (111) photoanodes integrated, protected Si photoanodes that did not require deposition of a separate heterogeneous electrocatalyst for water oxidation.
The chemical reaction network of low-temperature plasma-assisted oxidation of methane (CH 4 ) and ethylene (C 2 H 4 ) with nickel oxide (NiO) was investigated in a heated plasma reactor through time-dependent species measurements by electron-ionization molecular beam mass spectrometry (EI-MBMS). Methane (ethylene) oxidation by NiO was explored in temperature ranges from 300-700 °C (300-500 °C) and 300-800 °C (300-600°C) for the plasma and non-plasma conditions, respectively. Significant enhancement of methane oxidation was observed with plasma between 400 and 500 °C, where no oxidation was observed under non-plasma conditions. For the oxidation of methane at higher temperatures three different oxidation stages were observed: I) a period of complete oxidation, II) a period of incomplete CO oxidation, and III) a period of carbon buildup. For the C 2 H 4 experiments, and unlike the CH 4 experiments, the plasma resulted in a significant amount of new intermediate oxygenated species, such as CH 2 O, CH 3 OH, C 2 H 4 O, and C 2 H 6 O. Carbon deposits were observed under both methane and ethylene conditions and verified by X-ray photoelectron spectroscopy (XPS). ReaxFF simulations were performed for the oxidation of CH 4 and C 2 H 4 in a non-plasma environment. The simulated intermediates and products largely agree with the species measured in the experiments, though the predicted intermediate oxygenated species such as CH 2 O and C 2 H 6 O were not observed in experiments under non-plasma conditions. A reaction pathway analysis for CH 4 and C 2 H 4 reacting with NiO was created based on the observed species from the MBMS spectra, along with ReaxFF simulations.
Surface oxidation/reduction processes, driven by varying electrochemical potentials, can substantially impact catalyst effectiveness and, consequently, electrolyzer performance. Here, this study combines theoretical and experimental approaches to explore the surface redox behavior of nickel oxides, which are cost-effective and efficient catalysts for many electrochemical reactions. Surface Pourbaix diagrams for three different phases of nickel oxides, i.e., nickel hydroxide (Ni(OH) 2 ), nickel oxyhydroxide (NiOOH), and nickel dioxide (NiO 2 ), were constructed using density functional theory-based simulations. Various experimental methods, including cyclic voltammetry, in situ Raman spectroscopy, and electrochemical titration, were employed to probe the surface redox processes of nickel oxide thin films. Our findings indicate that the ABAB stacking sequence of Ni(OH) 2 lacks stability under oxidizing conditions to host the surface oxidation (deprotonation) events, while the AABBCC stacking sequence of NiOOH is energetically favorable due to the presence of interlayer hydrogen bonding. Rapid charge transfer facilitated by interlayer hydrogen bonding accounts for the higher reactivity of partially oxidized/reduced NiOOH (001) surfaces compared to Ni(OH) 2 (001) and NiO 2 (001) surfaces with the same stoichiometry, where interlayer hydrogen bonding is absent. Insights presented in this work can offer guidelines for optimizing operational conditions and tailoring the surface structures and oxidation states of nickel oxides to enhance performance in applications such as electrocatalysis and supercapacitors.
We have synthesized a family of styryl-based molecules that have been attached to nickel oxide films using a novel ethoxysilane chemistry to modify the work function over a range of 900 meV.
Here, we reported a strategy of using an eggshell membrane to produce hierarchically porous carbon as a low-cost substrate for synthesizing a nano-nickel oxide catalyst (C@NiO), which can effectively turn biowaste—urea—into energy through an electrochemical approach. Here, the interwoven carbon networks within NiO led to highly efficient urea oxidation due to the strong synergistic effect. The as-prepared electrode only needed 1.36 V versus reversible hydrogen electrode to realize a high efficiency of 10 mA cm –2 in 1.0 M KOH with 0.33 M urea and delivered an even higher current density of 25 mA cm –2 at 1.46 V, which is smaller than that of the porous carbon and commercial Pt/C catalyst. Benefiting from theoretical calculations, Ni(III) active species and the porous carbon further enabled the electrocatalyst to effectively inhibit the “CO 2 poisoning” of electrocatalysts, as well as ensuring its superior performance for urea oxidation.
The nickel-oxide electrode common to the nickel hydrogen and nickel cadmium cell is by design the limiting or capacity determining electrode on both charge and discharge. The useable discharge capacity from this electrode, and since it is the limiting electrode, the useable discharge capacity of the cell as well, can and is optimized by rate of charge, charge temperature and additives to electrode and electrolyte. Recent tests with nickel hydrogen cells and tests performed almost 25 years ago with nickel cadmium cells indicate an improvement of capacity as a result of using increased electrolyte concentration.
Thermal expansion of polycrystalline nickel oxide in oxygen atmosphere with 5 percent nitrogen to 1930 degrees C, noting grain size
Sintered plate and graphite nickel oxide electrode composition - battery active nickel oxides
Photodesorption of oxygen from nickel oxide at room temperature using 635, 705, and 1070 millimicron light
The characteristics of a metal-oxide-metal (MOM) tunnel diode made of nickel, nickel-oxide, and gold, designed and fabricated by standard integrated circuit technology for use in FIR rectennas, are presented. The MOM tunnel diode was formed by overlapping a 0.8-micron-wide layer of 1000-A of nickel, which was oxidized to form a thin layer of nickel oxide, with a 1500 A-thick layer of gold. The dc current-voltage characteristics of the MOM diode showed that the current dependence on voltage was linear about zero bias up to a bias of about 70 mV. The maximum detection of a low-level signal (10-mV ac) was determined to be at a dc voltage of 70 mV across the MOM diode. The rectified output signal due to a chopped 10.6-micron CO2 laser incident upon the rectenna device was found to increase with dc bias, with a maximum value of 1000 nV for a junction bias of 100 mV at room temperature.
In solid oxide cell (SOC) electrodes, nickel oxide reduction is a fundamental step occurring during the initial stages of cell operation. The reduction procedure is considered to be crucial in producing the final fuel electrode microstructure. This work studies the reduction reaction occurring in a SOC fuel electrode by means of X-ray ptychographic nanotomography. The same microstructure is analyzed in its pristine state and after 1 h of reduction at 850 °C, in dry hydrogen. The microstructure evolution is discussed in terms of changes in volume fractions, surface areas, and connectivity of the different constituent materials. The pore network in the unreduced cermet is revealed to be fully isolated, implying that reduction proceeds inwards from the edges of the sample towards the center. For the given experimental conditions we report that reduction is complete after 1 h of treatment but the resulting nickel network is not yet percolated and detached from the yttria-stabilized zirconia.
Active compound formation on battery nickel oxide electrode during charge, overcharge, and discharge
X-ray diffraction investigation of sintered nickel oxide anodes for nickel-cadmium cells
Electrochemical analysis of battery active sintered nickel oxides - oxidation state, stand and temperature effect, and charge retention
X-ray diffraction of sintered nickel oxide charged electrode, structural effect of initial stand at various temperatures, and comparison with cobalt doped positives
Optimum concentration of cobalt doping of nickel oxide electrodes and structural studies of electrode
Identification and characterization of battery active compound structures formed on nickel oxide electrode during charging and discharging