SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
ASME Code Development - Nonmetallics slides to include behavior models, licensing & code, graphite R&D Program, As-Fab'd Properties, Mechanisms and Analysis, and Irradiation. Discussion on where these fit into Irradiation behavior, Ceramic Composites, Design, and Component Failure.
The hose-in-hose transfer lines (HIHTL) used to transfer waste at the United States Department of Energy’s Hanford Site Tank Farm are fabricated from an ethylene propylene diene monomer (EPDM) synthetic rubber. During waste transport, these hoses are exposed to several stressors including caustic solutions at high temperatures and high pressures, as well as β and γ radiation. The aging behavior of HIHTL and dog-bone shaped EPDM specimens were evaluated by exposure to solutions at 77 °C containing 0.00, 6.25, 12.50, and 25.00 % (v/v) sodium hydroxide (NaOH) for 12-months. After the exposure, the material properties of the specimens were measured and compared to the unaged samples. The material properties evaluated included the tensile strength of the EPDM dog-bone samples and the burst pressure of the HIHTL. Both the tensile strength of the EPDM dog-bone samples and the burst pressure of the HIHTL specimens exposed to the 6.25 % NaOH solution exhibited the most significant deterioration and those exposed to 25.00 % NaOH solution had the least deterioration. Finally, examination of the HIHTL and the EPDM dog-bone specimens with scanning electron microscopy showed that the deterioration for the specimens exposed to 6.25 % NaOH solution were the most severe and the samples exposed to 25.00 % NaOH solution had the least deterioration.
Transition metal perovskite (ABO 3 ) is an emerging type of oxygen evolution reaction (OER) electrocatalyst that shows reasonably good activity and moderate stability. Although efforts have been made to improve perovskite’ OER performance by various element substitution at A/B-site, the influence of ion, particularly non-metallic ion, substitutions on the OER mechanism are rarely studied. More and more evidence has shown that the metal-center theory has failed to explain lots of OER-related phenomena. Therefore, it is urgent to understand how the cation and anion sites in perovskite determine OER performance. In this work, we used a Fe and P co-doped LaCoO 3 as a model system to explore the influence of substitution in perovskite by combining operando/ex-situ X-ray characterization and density functional theory (DFT). We observed enhanced OER catalytic activities in co-doped materials, which are attributed to the stronger transition-metal-oxygen-bonding-covalency (TMOBC). The detailed analyses by O K-edge XAS, electrochemical performance, and DFT suggest that the hybridization between O 2p and transition metal 3d e g orbitals could be a more credible descriptor of perovskite for OER, which is the combination of e g orbital theory and TMOBC theory. The finding in our work provides insights into the OER catalysis mechanism on metal oxides, which could guide new design of cost-effective oxide electrocatalysts.
Confining materials within nanoscale volumes alters their physical and chemical properties, with positive consequences for energy storage, conversion, and catalysis. The pore structure and composition of scaffolds are essential variables for optimizing these properties, with carbon-based materials being preferred due to their tunable porous structures and chemical versatility. This study investigates the influence of surface functional groups on the dehydrogenation kinetics of nanoconfined NaAlH4 using zeolite-templated carbons (ZTCs). Here we focus on oxygen functional groups commonly present as intrinsic impurities on carbon scaffolds, analyzing three ZTC scaffolds to determine how their concentrations and configurations affect dehydrogenation behavior. Our findings reveal that carbonyl groups enhance charge transfer and destabilize Al–H bonds more effectively than ether or phenol groups. This indicates that the type of oxygen functional group is more critical than the quantity, highlighting the importance of properly tailoring oxygen defects to improve hydrogen storage performance in nanoconfined systems.
Graphene nanoribbons (GNRs) of precise size and shape, critical for controlling electronic properties and future device applications, can be realized via precision synthesis on surfaces using rationally designed molecular precursors. Fluorine-bearing precursors have the potential to form GNRs on nonmetallic substrates suitable for device fabrication. Here, we investigate the deposition temperature-mediated growth of a new fluorine-bearing precursor, 6,11-diiodo-1,4-bis(2-fluorophenyl)-2,3-diphenyltriphenylene (C 42 H 24 F 2 I 2 ), into helically shaped polymer intermediates and chevron-type GNRs on Au(111) by combining scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory simulations. The fluorinated precursors do not adsorb on the Au(111) surface at lower temperatures, necessitating an optimum substrate temperature to achieve maximum polymer and GNR lengths. We compare the adsorption behavior with that of pristine chevron precursors and discuss the effects of C-H and C-F bonds. The results elucidate the growth mechanism of GNRs with fluorine-bearing precursors and establish a foundation for future synthesis of GNRs on nonmetallic substrates.
Two‐dimensional (2D) transition metal carbides and nitrides, known as MXenes, possess unique physical and chemical properties, enabling diverse applications in fields ranging from energy storage to communication, catalysis, sensing, healthcare, and beyond. Despite extensive research and notable advancements, a fundamental understanding of MXenes’ phase diversity and its connection to their hierarchical precursors, including the intermediate MAX phases and the ancestral bulk phases, remains limited. Here, in this study, it is hypothesized that the atomic coordination environments adopted by transition metal and nonmetallic atoms in their three‐dimensional (3D) bulk precursors may persist in 2D MXenes to govern their phase diversity. Using high‐throughput modeling based on first‐principles density functional theory, a wide range of MXene phases is unveiled and comprehensively evaluate their relative stabilities across a large chemical space. The key to the approach lies in considering various atomic coordination environments drawn from four types of ancestral bulk phases. Through this comprehensive structural library of MXenes, general guiding principles are uncovered, such as a close alignment between the phase stability of MXenes and that of their 3D precursors. These findings introduce a new design strategy in which the atomic coordination environments in bulk phases can serve as reliable predictors for accessing the diverse structural landscape of MXenes.
The synthesis, structures, and properties of two quaternary barium–arsenide materials are presented. The first, Ba 4 Ag 2.3 In 1.7 As 8 , is a novel material with the monoclinic unit cell ( P 2 1 / m space group). The layered crystal structure of Ba 4 Ag 2.3 In 1.7 As 8 may be considered a lower‐symmetry, distorted analog of the LaCuSb 2 structure. The structure features a rare As fragment, cis‐trans As chains along the [010] direction. Large crystals of Ba 4 Ag 2.3 In 1.7 As 8 can be grown from Bi flux and are used for subsequent transport property measurements. Electrical resistivity and heat capacity properties are reported, establishing Ba 4 Ag 2.3 In 1.7 As 8 as a metallic phase. The second material, Ba 4 AgGa 5 As 8 , is a 3D material that crystallizes in the orthorhombic unit cell (noncentrosymmetric and polar Iba 2 space group). Expanding upon its original discovery, the optimized synthetic profile for single‐phase polycrystalline samples as well as transport properties relevant to thermoelectric applications are presented. Ba 4 AgGa 5 As 8 exhibits a high Seebeck coefficient of 290 μV K −1 at room temperature, indicative of lower carrier concentrations typical for nonmetallic phases. Electrical resistivity measurements also affirm conventional semiconducting behavior for Ba 4 AgGa 5 As 8 .
Fiber-reinforced ceramic matrix composites are attractive for high-temperature nuclear applications due to excellent thermal and mechanical properties as well as reasonable-to-outstanding radiation resistance. Over the past 20 years, the use of ceramic matrix composite applications expanded to many commercial non-nuclear industries as fabrication and application of the technologies mature. The ASME Boiler Pressure Vessel Code, under Section III Division 5, provides the design and construction rules for High Temperature Reactor components. It published the first rules for ceramic matrix composites to be used for reactor core components. The rules lay out the quality requirements together with the design and materials criteria for the use and application of silicon carbide- and carbon-based matrix material technologies. As with the established graphite rules, the ceramic composite material rules are structured in Subsection HH (from Section III), that addresses the criteria for class SN nonmetallic core components. The code rules rely heavily on the development and publication of standards for composite specification, classification, and testing of mechanical, thermal, and other properties. These test methods are developed in ASTM Committee C28 on Advanced Ceramics, with a current focus on ceramic composite tubes. This article describes the detail of the composites code, the design methodology and similarities to the graphite code, the guidance for the development of specifications for ceramic composites (for nuclear applications) including recent standard developments, and it mentions the next steps to support licensing aspects by validating the code with benchmarking data.
Here, we report results from our experimental investigation of the distorted kagome compound FeCrAs. We used tin metal as a flux to produce needlelike crystals, which we characterized using single-crystal X-ray diffraction as well as measurements of magnetization, electrical transport, and heat capacity. The physical behaviors differ in two notable ways from those of previously studied crystals grown from a stoichiometric melt. First, the Néel temperature is found to be 150 K, about 25 K higher than in previous reports. Second, the Sommerfeld coefficient, a measure of the electronic heat capacity, is found to be significantly smaller than the previously reported value. These differences indicate stronger magnetic interactions and fewer charge carriers in the flux-grown crystals, which may be related to differences in stoichiometry or disorder. In addition, we find unusual thermal expansion behavior, with an anomaly at the Néel temperature and nearly temperature-independent thermal expansion along the hexagonal c-axis above this transition. This suggests significant spin–lattice coupling, which may provide insight into nonmetallic transport properties that have been associated with anomalous charge carrier scattering. The flux growth presented here may provide a useful approach for tuning crystal chemistry to explore magnetism, transport, and spin–lattice coupling in this interesting material.
Electronic structure calculations based on density functional theory (DFT) have successfully predicted numerous ground-state properties of a variety of molecules and materials. However, exchange and correlation functionals currently used in the literature, including semilocal and hybrid functionals, are often inaccurate to describe the electronic properties of heterogeneous solids, especially systems composed of building blocks with large dielectric mismatch. Here, in this study, we present a dielectric-dependent range-separated hybrid functional, screened-exchange range-separated hybrid (SE-RSH), for the investigation of heterogeneous materials. We define a spatially dependent fraction of exact exchange inspired by the static Coulomb-hole and screened-exchange (COHSEX) approximation used in many-body perturbation theory, and we show that the proposed functional accurately predicts the electronic structure of several nonmetallic interfaces, three- and two-dimensional, pristine, and defective solids and nanoparticles.
Boron-doped copper has recently emerged as an active and stable catalyst for the electrochemical reduction of CO 2 to value-added C 2 products. Here, in this work, we develop a realistic model of CO electroreduction on surface borides of copper under operational conditions, taking into account the effects of electrode potential, electrolyte environment, and pH. We study the possible reconstruction of the electrocatalyst surface using grand canonical DFT and global optimization to obtain a potential-dependent grand canonical ensemble description of metastable, hydrogen-covered catalyst surfaces. Two key surface configurations, low H coverage (LC, −0.6 V SHE ) and high H coverage (HC, −0.8 V SHE ), dominate this ensemble, with the former being kinetically persistent and C 2 selective under strongly reducing conditions. Nonmetallic boron sites on the surface copper boride are found to bind CO more strongly than copper sites, and mechanistic investigation of CO electroreduction pathways presents a surprisingly unconventional case of boron-centered reactivity in contrast to typical copper-centered reactivity. Neighboring boron sites present along boron chains on the surface copper boride are found to facilitate C−C coupling, thereby driving the high C 2 selectivity of this electrocatalyst.
Thermal measurements of heat capacity and thermal conductivity in a wide range of insulators and superconductors exhibit a “thermal paradox”: a large linear specific heat reminiscent of neutral Fermi surfaces (associated with fractionalized quasiparticles) in nonmetallic samples that exhibit no corresponding linear temperature coefficient to the thermal conductivity. At first sight, these observations appear to support the formation of a continuum of thermally localized many-body excitations, a form of many-body localization that would be fascinating in its own right. Here, in this work, by mapping thermal conductivity measurements onto thermal 𝑅𝐶 circuits, we argue that the development of extremely long thermal relaxation times, a “thermal bottleneck,” is likely in systems with either many-body localization or neutral Fermi surfaces due to the large ratio between the electron and phonon specific heat capacities. We present a reevaluation of thermal conductivity measurements in materials exhibiting a thermal paradox that can be used in future experiments to deliberate between these two exciting alternatives.
The nature of the normal state of cuprate superconductors continues to stimulate considerable speculation. Of particular interest has been the linear temperature dependence of the in-plane resistivity in the low-temperature limit, which violates the prediction for a Fermi liquid. We present measurements of anisotropic resistivity in La$_{2–x}$Sr$_x$CuO$_4$ that confirm the strange-metal behavior for crystals with doped-hole concentration $p = x > p^* \sim 0.19$ and contrast with the nonmetallic behavior for $p < p^*$. We propose that the changes at $p^*$ are associated with a first-order transition from doped Mott insulator to conventional metal; the transition appears as a crossover due to intrinsic dopant disorder. We consider results from the literature that support this picture; in particular, we present a simulation of the impact of the disorder on the first-order transition and the doping dependence of stripe correlations. Below $p^*$, the strong electronic interactions result in charge and spin stripe correlations that percolate across the CuO 2 planes; above $p^*$, residual stripe correlations are restricted to isolated puddles. Here we suggest that the $T$-linear resistivity results from scattering of quasiparticles from antiferromagnetic spin fluctuations within the correlated puddles. This is a modest effect compared to the case at $p < p^*$, where the data suggest that there are no coherent quasiparticles in the normal state.
Here, we develop a computational database, website applications (web-apps), and machine-learning (ML) models to accelerate the design and discovery of two-dimensional (2D) heterostructures. Using density functional theory (DFT) based lattice parameters and electronic band energies for 674 nonmetallic exfoliable 2D materials, we generate 226 779 possible bilayer heterostructures. We classify these heterostructures into type-I, -II, and -III systems according to Anderson’s rule, which is based on the relative band alignments of the noninteracting monolayers. We find that type II is the most common and type III the least common heterostructure type. We subsequently analyze the chemical trends for each heterostructure type in terms of the Periodic Table of constituent elements. The band alignment data can also be used for identifying photocatalysts and high-work-function 2D metals for contacts. We validate our results by comparing them to experimental data as well as hybrid-functional predictions. Additionally, we carry out DFT calculations of a few selected systems (MoS 2 /WSe 2 , MoS 2 /h-BN, and MoSe 2 /CrI 3 ), to compare the band-alignment description with the predictions from Anderson’s rule. We develop web-apps to enable users to virtually create combinations of 2D materials and predict their properties. Additionally, we use ML tools to predict band-alignment information for 2D materials. The web-apps, tools, and associated data will be distributed through the JARVIS-HETEROSTRUCTURE website. Our analysis, results, and the developed web-apps can be applied to the screening and design applications, such as finding alternative photocatalysts, photodetectors, and high-work-function (WF) 2D-metal contacts.
Thermoelectric materials can serve for conversion between thermal and electrical energy. In the search for new thermoelectric materials, layered SnSe and SnSe 2 are promising candidates. Here we have successfully synthesized SnSe and SnSe 2 single crystals by the modified Bridgman method and studied their thermoelectric properties: thermopower (S), thermal conductivity (κ), and electrical conductivity (σ) in the temperature range between 2 K and 400 K, which are absent in the literature. In particular, the kink observed in the thermopower corresponds to the metallic-nonmetallic crossover temperature for both SnSe and SnSe 2 , reflecting their inherent electronic nature. Compared to SnSe 2 above 100 K, we find that SnSe exhibits higher electrical conductivity, higher thermopower, and lower thermal conductivity, thus resulting in the higher figure of merit. Hall effect measurements reveal that the Hall mobility in SnSe is an order higher than that in SnSe 2 , advancing its thermoelectric performance. These experimental results are supported by first principles calculations, which indicate that the inequivalent Sn-Se bonding lengths help improve the figure of merit of SnSe.
Identifying and understanding interfacial magnetic structures of transition-metal oxides are of great importance not only for fundamental physics but also for potential device applications. Among them, manganite and ruthenate heterostructures have attracted considerable interest due to their intriguing interfacial properties induced by complex magnetic interactions. Here, we report the observation of dramatic buffer-layer dependence of ferromagnetism in ultrathin (La 2/3 Ca 1/3 )MnO 3 (LCMO)-based heterostructures. Though all trilayers are nonmetallic, the SrRuO 3 -buffered LCMO trilayer exhibits enhanced ferromagnetism with the Curie temperature (𝑇 C ∼ 198K) much higher than for CaRuO 3 (𝑇 C ∼ 99K)- and SrTiO 3 (𝑇 C ∼ 42K)-buffered counterparts, as well as the monolithic LCMO films with similar thickness. Combining atomically resolved scanning transmission electron microscopy imaging with electron energy loss spectroscopy mapping, we reveal that asymmetric interfaces exist in the SrRuO 3 buffered trilayer, with one exhibiting 1 unit-cell Sr diffusion into LCMO, which is responsible for the 𝑇 C enhancement. In contrast, charge transfer, which has been proposed previously as a possible mechanism, is excluded in this study. In conclusion, our results may pave a promising road toward effective atomic control of interfacial magnetism.
This article describes the design, assembly, and implementation of a hand-held, magnetic-field-based sensor system that can be adapted for a variety of sensing applications. The miniaturized system is based on Chemical Identification by Magneto-Elastic Sensing (ChIMES) technology, which uses three concentric solenoid coils to wirelessly interrogate a sensor body comprised of a response material coupled to a magnetoelastic wire. The response material expands when it encounters a target, imposing mechanical stress on the wire and altering its magnetic permeability. The sensor bodies are passive, requiring no external power source, and they are small, measuring about 15 mm in length and 3.0 mm in diameter. Up to four sensor bodies can be configured as an evenly-spaced linear array. The sensor system operates by applying a low-frequency, current-stabilized, filtered triangle wave to a uniform-density excitation coil to switch the magnetic domains within the wire. Further, the responses from the sensors are picked up by a detection coil as stress-induced changes in the Faraday voltage, and the strong magnetic field induced by the excitation coil in the detection coil is nullified by a cancellation coil reverse-wound in series with the detection coil. The responses of the sensors in an array are separated in time by a linear gradient dc biasing coil. The sensors can be interrogated through metallic and nonmetallic barriers. The signals from the detection coil and the excitation coil are digitized by a pair of bipolar analog-to-digital converters (ADCs). A Raspberry Pi single-board computer (SBC) and associated software perform data acquisition and control all aspects of the sensor system hardware. The program allows the user to select the number of sensors in the array, the type of signal that is being collected, and the number of samples to take. The program also allows for signal processing of the sensor data, such as baseline correction. The program can differentiate sensor peaks from each other and calculate the magnitude of each sensor response with less than 1% error. The data are then displayed along with a graph of the signal.
More than 90% of the world’s hydrogen (H 2 ) is produced from fossil fuel sources, which requires energy-intensive separation and purification to produce high-purity H 2 fuel and to capture the carbon dioxide (CO 2 ) by-product. While membranes can decarbonize H 2 /CO 2 separation, their moderate H 2 /CO 2 selectivity requires secondary H 2 purification by pressure swing adsorption. Here, we report hyperselective carbon molecular sieve hollow fiber membranes showing H 2 /CO 2 selectivity exceeding 7000 under mixture permeation at 150°C, which is almost 30 times higher than the most selective nonmetallic membrane reported in the literature. The membrane is able to maintain an ultrahigh H 2 /CO 2 selectivity over 1400 under mixture permeation at 400°C. Pore structure characterization suggests that highly refined ultramicropores are responsible for effectively discriminating the closely sized H 2 and CO 2 molecules in the hyperselective carbon molecular sieve membrane. Modeling shows that the unprecedented H 2 /CO 2 selectivity will potentially allow one-step enrichment of fuel-grade H 2 from shifted syngas for decarbonized H 2 production.