Search NASA⌕ Search

SEARCH · Search NASA

Results for “PIND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

PIND: High spatial resolution by pinhole neutron diffraction

Here, a pinhole neutron diffraction (PIND) technique was developed to enable improving the spatial resolution down to 250 μm. Instead of the conventional engineering diffraction method which integrates all the diffraction signals on the detector plane, the PIND setup utilizes the diffraction pattern of each pixel on 2D detectors. The proposed PIND arrangement enables improving the spatial resolution of time-of-flight instruments and allows solving problems involving steep gradients of strain or texture. The phase content and preferential orientation of grains inside samples can be spatially resolved in 2D/3D. Further, PIND retains the capability of in-situ non-destructive neutron diffraction mapping of lattice strain and grain orientation under external stimuli such as temperature and force.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Calibration standards for PIND tests

Calibrated set of microcircuit packages containing tiny particles with known masses can be used as reference standards for Particle-Impact Noise-Detection (PIND) tests.

Gaudiano, S.↗

Shock during PIND test frees particles

Recent study on Particle-Impact Noise-Detection (PIND) shows impact at 1,500 to 4,000 G normally imparted to hybrid microcircuits during testing knocks loose stray trapped particle that can be subsequentially removed. Process may be 80 to 90 percent effective in removal of particles depending on type of test utilized.

Caruso, S. V.↗

Particle-impact noise detector (PIND)

Package, in page assembly, is subjected to low-frequency vibration, and noise generated by particle impacts is picked up by transducer. Test procedure calls for three transverse shocks to be applied to page to dislodge any trapped particles.

Barr, R. J.↗

PIND Task Group Report

Explore the source record for details and available documents.

particle detection in cavity devices↗

Bending Behavior of a Wrought Magnesium Alloy Investigated by the In Situ Pinhole Neutron Diffraction Method

The tensile twinning and detwinning behaviors of a wrought magnesium alloy have been investigated during in situ four-point bending using the state-of-the-art high spatial resolution pinhole neutron diffraction (PIND) method. The PIND method allowed us to resolve the tensile twinning/detwinning and lattice strain distributions across the bending sample during a loading-unloading sequence with a 0.5 mm step size. It was found that the extensive tensile twinning and detwinning occurred near the compression surface, while no tensile twinning behavior was observed in the middle layer and tension side of the bending sample. During the bending, the neutral plane shifted from the compression side to the tension side. Compared with the traditional neutron diffraction mapping method, the PIND method provides more detailed information inside the bending sample due to a higher spatial resolution.

36 MATERIALS SCIENCE↗

Sensitivities of particle impact noise detection

The results of a study on Particle Impact Noise Detection commonly referred to as PIND testing is described. Certain sensitivities of PIND testing as applicable to hybrid microcircuits were determined, and techniques for removing particles from sealed hybrid packages were evaluated. Methods for freeing particles which have become trapped or hung up inside the hybrid package and, therefore, give no PIND test response were examined.

Keister, F. Z.↗

Preparation of calibrated test packages for particle impact noise detection

A standard calibration method for any particle impact noise detection (PIND) test system used to detect loose particles responsible for failures in hybrid circuits was developed along with a procedure for preparing PIND standard test devices. Hybrid packages were seeded with a single gold ball, hermetically sealed, leak tested, and PIND tested. Conclusions are presented.

Source record↗

Some aspects of contamination detection, analyses, and control in microcircuits for the NASA Space Shuttle program

The Space Shuttle system is currently one of the National Aeronautics and Space Administration's (NASA) most important and complex programs. A significant number of hybrid microcircuits are being developed and used on the Space Shuttle. Since the Shuttle is a manned vehicle, reliability of the hybrids is flight critical. Loose particle contamination is one of the major causes of failure and reduced operating life for microcircuits. Process controls, surface coatings, and the particle impact noise detection (PIND) test were assessed for control of particle contamination, and the decision was made by NASA to require PIND test for all hybrid circuits. Selected hybrids from the production line of one vendor that had failed the PIND test were analyzed. Results of this program are presented.

Caruso, S. V.↗

Neural Networks Analyze Data In Particle-Impact-Noise Tests

Electronic neural networks and computers put to use in analyzing data acquired in particle-impact-noise-detection (PIND) tests of packaged electronic components. PIND tests detect loose particles in packages that cause failures during subsequent operation of packages in presence of accelerations or other effects - for example, loose electrically conductive particles that bounce into positions in which they cause short circuits. Interpretation of test data more objective and accurate. Preliminary results suggest use of neural networks result in significant improvement in quality and reliability and decrease in cost of PIND testing.

Scaglione, Lois J.↗