SEARCH · Search NASA
Results for “Photoelectrocatalysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Characterizing the Geometry and Quantifying the Impact of Nanoscopic Electrocatalyst/Semiconductor Interfaces under Solar Water Splitting Conditions
The materials that are receiving the most attention in photoelectrochemical water splitting are metallic nanoparticle electrocatalysts (np-EC) attached to the surface of a semiconductor (SC) light absorber. In these multicomponent systems, the interface between the semiconductor and electrocatalysts critically affects performance. However, the np-EC/SC interface remains poorly understood as it is complex on atomic scales, dynamic under reaction conditions, and inaccessible to direct experimental probes. This contribution sheds light on how the electrocatalyst/semiconductor interface evolves under reaction conditions by investigating the behavior of nickel electrocatalysts (as nanoparticles and films) deposited on silicon semiconductors. Rigorous electrochemical experiments, interfacial atomistic characterization, and computational modeling are combined to demonstrate critical links between the atomistic features of the interface and the overall performance. It is shown that electrolyte-induced atomistic changes to the interface lead to (1) modulation of the charge carrier fluxes and a dramatic decrease in the electron/hole recombination rates and (2) a change in the barrier height of the interface. Additionally, the critical roles of nonidealities and electrocatalyst coverage due to interfacial geometry are explored. Each of these factors must be considered to optimize the design of metal/semiconductor interfaces which are broadly applicable to photoelectrocatalysis and photovoltaic research.
Measuring the flatband potential in 2D semiconductors: Pitfalls and a possible SECCM solution
The flatband potential (V fb ) is a critical parameter in semiconductor electrochemistry, defining the potential at which no excess charge exists at the semiconductor/electrolyte interface. It serves as a key reference for interpreting charge transfer kinetics and current–voltage behavior. However, conventional methods like Mott–Schottky analysis fail for atomically thin 2D materials due to the breakdown of the depletion approximation. This perspective examines the limitations of traditional V fb measurements for 2D semiconductors and the experimental challenges that arise. To address these issues, we propose using scanning electrochemical cell microscopy (SECCM) to spatially resolve the potential of zero charge (V pzc ), equivalent to V fb . This approach mitigates sample heterogeneity issues, such as pinholes or multilayer defects, and offers a pathway to more accurate electrochemical characterization. Ultimately, this method will enhance understanding of current–potential behavior in 2D materials, supporting the design of advanced systems for photoelectrocatalysis, energy conversion, and sensing.
Kinetics of Hydride Transfer from Catalytic Metal-Free Hydride Donors to CO2
Selective reduction of CO 2 to formate represents an ongoing challenge in photoelectrocatalysis. To provide mechanistic insights, we investigate the kinetics of hydride transfer (HT) from a series of metal-free hydride donors to CO 2 . The observed dependence of experimental and calculated HT barriers on the thermodynamic driving force was modeled by using the Marcus hydride transfer formalism to obtain the insights into the effect of reorganization energies on the reaction kinetics. Our results indicate that even if the most ideal hydride donor were discovered, the HT to CO 2 would exhibit sluggish kinetics (<100 turnovers per second at -0.1 eV driving force), indicating that the conventional HT may not be an appropriate mechanism for solar conversion of CO 2 to formate. We propose that the conventional HT mechanism should not be considered for CO 2 reduction catalysis and argue that the orthogonal HT mechanism, previously proposed to address thermodynamic limitations of this reaction, may also lead to lower kinetic barriers for CO 2 reduction to formate.
Photoelectrochemical Proton-Coupled Electron Transfer of TiO 2 Thin Films on Silicon
TiO 2 thin films are often used as protective layers on semiconductors for applications in photovoltaics, molecule–semiconductor hybrid photoelectrodes, and more. Experiments reported here show that TiO 2 thin films on silicon are electrochemically and photoelectrochemically reduced in buffered acetonitrile at potentials relevant to photoelectrocatalysis of CO 2 reduction, N 2 reduction, and H 2 evolution. On both n-type Si and irradiated p-type Si, TiO 2 reduction is proton-coupled with a 1e – :1H + stoichiometry, as demonstrated by the Nernstian dependence of the Ti 4+/3+ E 1/2 on the buffer pK a . Experiments were conducted with and without illumination, and a photovoltage of ∼0.6 V was observed across 20 orders of magnitude in proton activity. The 4 nm films are almost stoichiometrically reduced under mild conditions. The reduced films catalytically transfer protons and electrons to hydrogen atom acceptors, based on cyclic voltammogram, bulk electrolysis, and other mechanistic evidence. TiO 2 /Si thus has the potential to photoelectrochemically generate high-energy H atom carriers. Characterization of the TiO 2 films after reduction reveals restructuring with the formation of islands, rendering TiO 2 films as a potentially poor choice as protecting films or catalyst supports under reducing and protic conditions. Altogether, this work demonstrates that atomic layer deposition TiO 2 films on silicon photoelectrodes undergo both chemical and morphological changes upon application of potentials only modestly negative of RHE in these media. While the results should serve as a cautionary tale for researchers aiming to immobilize molecular monolayers on “protective” metal oxides, the robust proton-coupled electron transfer reactivity of the films introduces opportunities for the photoelectrochemical generation of reactive charge-carrying mediators.
Electron Inversion and Tunneling at Silicon Thermal Oxide Interfaces for Solar-Driven Molecular Catalysis to Syngas
Semiconductor photoelectrodes are regularly coupled to solid-state heterogeneous catalysts to perform solar-driven reduction of CO 2 . Less frequently, molecular catalysts are employed to better control the reactivity toward desired products, yet the development of robust semiconductor/molecule interfaces has proven challenging. Here, we demonstrate that a 2–3 nm thermal oxide layer on Si exhibits stability in aqueous solution, high photovoltage, and a photocurrent density of ∼10 mA/cm 2 for the solar-driven photoelectrochemical reduction of a homogeneous molecular catalyst, producing syngas with an ∼2:1 H 2 to CO ratio. Because of a low defect density, the oxide interface forms an electron inversion layer with metal-like electron density at cathodic potentials. This inversion layer facilitates electron transfer to redox-active molecules via tunneling even if the molecule’s reduction potential is beyond the semiconductor’s conduction band edge. Using an electrolyte solution composed of a homogeneous cobalt bis(terpyridine) catalyst in a water/organic solvent mixture, stable photoelectrochemistry was observed under 1-sun illumination, exhibiting an ∼30% Faradaic efficiency for CO that was similar to a glassy carbon electrode under comparable conditions. Furthermore, the results demonstrate that an ultrathin thermal oxide interface is a robust platform for development of aqueous-stable, molecule-driven photoelectrocatalysis.
Introduction to (Photo)electrocatalysis For Renewable Energy
Humanity is facing a significant and growing energy demand, necessitating a new energy paradigm built on clean and abundant renewable energy.1 Within this context, electrocatalysis and (photo)electrocatalysis hold great promise for enabling renewable energies such as solar and wind power to overcome the transient nature of their energy output.2-6 Developing catalysts that operate efficiently and selectively, and that are also robust, has been the focus of much research. This special issue brings together the latest advances in the fundamental and applied science addressing the synthesis, characterization, mechanisms, and performance of (photo)electrocatalysts for energy storage and conversion of small molecules into useful specialty and commodity chemicals and fuels. The electrocatalysts and (photo)electrocatalysts highlighted in this issue include metalloenzymes, homogeneous and supported molecular catalysts, and diverse heterogeneous nanoparticulate and thin film systems. The reports span across basic and applied studies and encompass both experimental and theoretical investigations.
Design principles of tandem cascade photoelectrochemical devices
Cascade photoelectrocatalysis (PEC) is a possible method to improve the selectivity of solar-driven CO 2 reduction (CO 2 R). This concept can be realized by coupling different CO 2 R catalysts to different subcells in a multijunction photovoltaic (PV) stack. Efficient implementation will require careful tuning of the photocurrents and design of the photovoltages provided by the subcells to the CO 2 R catalysts in such a way as to facilitate the target reaction. Here, we outline the design principles of the tandem PEC approach using two-step conversion of CO 2 to ethylene in aqueous electrolyte, via a CO intermediate, as a model system. To perform this reaction, the first coupled PV-catalyst component should provide 4 electrons to reduce 2 molecules of CO 2 to CO; the second component should provide 8 electrons to reduce 2 CO molecules to C 2 H 4 . Based on known CO 2 R catalysts, the overpotential required to produce CO can be less than that required to reduce it to ethylene, creating the opportunity for improved efficiency. Cascade PEC can be realized in a three-terminal tandem (3TT) configuration using III–V-semiconductor based subcells coupled to Au (produces CO intermediate) and Cu (converts CO to ethylene). The current to each catalyst can be controlled by the area of the subcell exposed to the electrolyte, and the photovoltage is determined by the materials selected and device configuration. Operating conditions are found by simulating the coupled system using the open-source circuit simulator SPICE (Simulation Program with Integrated Circuits Emphasis). We identify conditions under which a 3TT configuration can have a higher solar to chemical conversion efficiency compared to a two-terminal two-junction tandem (2T 2J) with the same absorbers and a Cu catalyst only. We also show that 3TT PEC devices can be less sensitive to variations in catalyst activity compared to 2T devices. Lastly, we discuss the applications of cascade PEC to CO 2 reduction, using different intermediates, and to other chemical networks.
Probing the electronic properties of the electrified silicon/water interface by combining simulations and experiments.
Silicon (Si) is broadly used in electrochemical and photoelectrochemical devices, where the capacitive and Faradaic reactions at the Si/water interfaces are critical for signal transduction or noise generation. However, probing the electrified Si/water interface at the microscopic level remains a challenging task. Here we focus on hydrogenated Si surfaces in contact with water, relevant to transient electronics and photoelectrochemical modulation of biological cells and tissues. We show that by carrying out first principles molecular dynamics simulations of the Si(100)/water interface in the presence of an electric field we can realistically correlate the computed flat-band potential and tunneling current images at the interface with experimentally measured capacitive and Faradaic currents. Specifically, we validate our simulations in the presence of bias by performing pulsed chronoamperometry measurements on Si wafers in solution. Consistent with prior experiments, our measurements and simulations indicate the presence of voltage-dependent capacitive currents at the interface. We also find that Faradaic currents are weakly dependent on the applied bias, which we relate to surface defects present in newly prepared samples.
Molecular Reaction Imaging of a Surface Recombination Process Explains Performance Variation Among Smooth MoS 2 Photoelectrodes
Transition metal dichalcogenides (TMD) such as WSe 2 and MoS 2 are highly efficient and stable light absorbers in TMD∣I − ,I 3 − ∣Pt liquid junction solar cells. It is generally accepted that TMD crystals with a large fraction of exposed edge sites exhibit lower power conversion efficiencies (PCEs) than apparently smooth crystals. However, one open question is why does the PCE vary significantly from one crystal to another? Answering this critical question could lead to robust syntheses for high quality and uniform TMD samples. In this work, we apply nanoscale photoelectrochemical microscopy techniques to study n-type TMD nanoflake∣I − ,I 3 − ∣Pt cells. Using a combination of near-diffraction-limited photocurrent mapping and molecular reaction imaging techniques, we reveal a previously hidden surface recombination process: photogenerated holes in hidden p-type domains travel micron-scale distances parallel to the solid/liquid interface and preferentially react with iodide at step-edges. The overall efficiency of the nanoflake, as evidenced from whole nanoflake-level photoelectrochemical measurements, is dictated by the size, efficiency, and location of n- and p-type domains. Furthermore, these results provide a unifying view of efficiency losses in smooth TMD photoelectrodes and open the possibility to design electrode architectures that leverage the long-range lateral charge transport property for photoelectrocatalysis.
Photoinduced Charge Transfer and Trapping on Single Gold Metal Nanoparticles on TiO 2
Not Available
Metal–Carbodithioate-Based 3D Semiconducting Metal–Organic Framework: Porous Optoelectronic Material for Energy Conversion
Solar energy conversion requires the working compositions to generate photoinduced charges with high potential and the ability to deliver charges to the catalytic sites and/or external electrode. These two properties are typically at odds with each other and call for new molecular materials with sufficient conjugation to improve charge conductivity but not as much conjugation as to overly compromise the optical band gap. In this work, we developed a semiconducting metal-organic framework (MOF) prepared explicitly through metal-carbodithioate"(-CS 2 ) n M" linkage chemistry, entailing augmented metal-linker electronic communication. The stronger ligand field and higher covalent character of metal-carbodithioate linkages-when combined with spirofluorene-derived organic struts and nickel-(II) ion-based nodes-provided a stable, semiconducting 3D-porous MOF, Spiro-CS 2 Ni. This MOF lacks long-range ordering and is defined by a flexible structure with non-aggregated building units, as suggested by reverse Monte Carlo simulations of the pair distribution function obtained from total scattering experiments. The solvent-removed "closed pore"material recorded a Brunauer-Emmett-Teller area of similar to 400m 2 /g, where the "open pore" form possesses90 wt % solvent-accessible porosity. Electrochemical measurements suggest that Spiro-CS 2 Ni possesses a band gap of 1.57 eV(sigma = 10 -7 S/cm at -1.3 V bias potential),which can be further improved by manipulating the d-electron configuration through an axial coordination (ligand/substrate), the latter of which indicates usefulness as an electrocatalyst and/or a photoelectrocatalyst(upon substrate binding). Transient-absorption spectroscopy reveals a long-lived photo-generated charge-transfer state (τ CR = 6.5 mu s) capable of chemical transformation under a biased voltage. Spiro-CS 2 Ni can endure a compelling range of pH(1-12 for weeks) and hours of electrochemical and photoelectrochemical conditions in the presence of water and organic acids. We believe this work provides crucial design principles for low-density, porous,light-energy-conversion materials.
Molten Salts-Driven Discovery of a Polar Mixed-Anion 3D Framework at the Nanoscale: Zn 4 Si 2 O 7 Cl 2 , Charge Transport and Photoelectrocatalytic Water Splitting
Mixed-anion compounds widen the chemical space of attainable materials compared to single anionic compounds, but the exploration of their structural diversity is limited by common synthetic paths. Especially, oxychlorides rely mainly on layered structures, which suffer from low stability during photo(electro)catalytic processes. Herein we report a strategy to design a new polar 3D tetrahedral framework with composition Zn 4 Si 2 O 7 Cl 2 . We use a molten salt medium to enable low temperature crystallization of nanowires of this new compound, by relying on tetrahedral building units present in the melt to build the connectivity of the oxychloride. These units are combined with silicon-based connectors from a non-oxidic Zintl phase to enable precise tuning of the oxygen content. This structure brings high chemical and thermal stability, as well as strongly anisotropic hole mobility along the polar axis. These features, associated with the ability to adjust the transport properties by doping, enable to tune water splitting properties for photoelectrocatalytic H 2 evolution and water oxidation. This work then paves the way to a new family of mixed-anion solids
Progress on Photo‐, Electro‐, and Photoelectro‐Catalytic Conversion of Recalcitrant Polyethylene, Polypropylene, and Polystyrene ‐ A Review
Abstract Recalcitrant waste plastics such a polyethylene, polypropylene, and polystyrene are difficult to recycle and are mostly disposed of in landfills and eventually leached into the environmental as micro‐ and nano‐plastics. This review explores how photo‐, electro‐, and combined photoelectro‐catalytic processes can assist in the degradation and upcycling of waste plastic into different chemicals and mitigate their release to the environment. In this work, we discuss how the different reaction mechanisms proceed, explore the current relevant literature, and highlight the developments needed to advance the field.
Photoelectrocatalytic reduction of CO 2 to formate using immobilized molecular manganese catalysts on oxidized porous silicon
The reduction of carbon dioxide (CO 2 ) to formate using molecular catalysts immobilized on high surface area porous silicon is described. Manganese complexes of the type ( R bpy)Mn(CO) 3 Br (bpy = 2,2′-bipyridine) were prepared with silatrane groups on the bpy ligand for attachment to oxide-coated porous silicon (SiO x -porSi). SiO x -porSi wafers were formed by heating hydrogen-terminated p-type porous silicon wafers under air, and the manganese complexes were immobilized on SiO x -porSi by heating at 80°C. The resulting hybrid photoelectrodes are photoelectrocatalysts for CO 2 reduction in acetonitrile containing 2.0 M triethylamine and 2.0 M isopropanol, yielding formate with high selectivity (>96%) and current density (∼0.6 mA/cm 2 ), excellent reproducibility, and a photovoltage of 280 mV at −1.75 V (versus ferrocenium/ferrocene) under 1 sun illumination. Here, the applied potential is close to the equilibrium potential for CO 2 reduction to formate. This work presents rare examples of immobilized molecular catalysts for CO 2 reduction to formate and the first on semiconducting silicon.
Influence of Surface Defects on WO 3 Photoelectrodes for Catalyzing Chloride Oxidation in Water
Tungsten oxide (WO 3 ) is an n-type semiconductor due to oxygen vacancies (□ O •• in Kroger-Vink notation) or surface protonation as H x WO 3 . It is one of the few acid-stable oxides under large positive bias, which makes WO 3 ideal for interrogating the mechanism of the chloride oxidation reaction (COR). The large, positive valence band edge of ∼3 eV provides the overpotential necessary to carry out the COR, but the reaction competes with the oxygen-evolution reaction in water. The □ O •• defect density can be controlled by the atmosphere under which the material is annealed, so WO 3 films were prepared by a spin-coating method from an ammonium metatungstate precursor annealed at 500 °C under air, flowing O 2 , and flowing argon. Annealing the films in a flowing O 2 atmosphere hinders the formation of □ O ••, and annealing in Ar leads to greater surface W 6+ , likely due to expelling intercalated H + . The saturated photocurrent density (j ph ) is highest in films with the greatest concentration of W 5+ and greatest concentration of oxide defects: (0.66 mA/cm 2 annealed in air, 0.58 mA/cm 2 annealed in Ar, and 0.49 mA/cm 2 annealed in O 2 , reported at 1.5 V vs Ag/AgCl, pH 3 (before the onset of a dark reaction). The defect concentrations are determined by X-ray photoelectron spectroscopy. In all cases the Faradaic efficiency for the COR is near unity. Finally, we demonstrate that W 5d states can be probed by ligand K-edge X-ray absorption near-edge spectroscopy via pre-edge (Cl 1s → W 5d) transitions, lower in energy than the ligand-centered (Cl 1s → 4p) transition. We use this analysis to show the presence of W─Cl covalent bonds on the WO 3 films post-COR, corroborated by DFT calculations. Furthermore, this result stands in contrast to the commonly assumed mechanistic proposal invoking outer-sphere electron transfer to a physisorbed chloride ion.
H 2 Evolution at an Electrochemical “Underpotential” with an Iridium-Based Molecular Photoelectrocatalyst
Molecular platforms capable of both photochemical H 2 evolution and electrochemical catalyst regeneration hold promise for the efficient generation of solar fuels. Systems studied to date require a significant electrochemical overpotential (η), so no photon energy is being chemically stored. A detailed study of the parameters that govern the electrochemical overpotential of molecular photoelectrocatalysts is presented. By understanding how tuning the solvent, catalyst structure, and acid pK a affect the kinetics and thermodynamics of the potential- and light-driven H 2 evolution reaction, conditions were identified wherein the solvento complex [Cp*Ir(bpy)(NCCH 3 )][PF 6 ] 2 (Cp* is pentamethylcyclopentadienyl; bpy is 2,2'-bipyridine) mediates photoelectrocatalytic H 2 formation at an electrochemical “underpotential” (η < 0) driven by visible light. Under 460 nm illumination and in the presence of the weak organic acid H-PhTMG + (2-phenyl-1,1,3,3- tetramethylguanidinium), the catalyst facilitates H 2 evolution with Faradaic efficiencies up to 90% and overpotentials as low as –90 mV. As a result, mechanistic studies enabled the construction of graphical “maps” that can guide the choice of catalyst and conditions to minimize overpotential, applicable to both photoelectrocatalysts and dark electrocatalysts.
Accessing and Photo-Accelerating Low-Overpotential Pathways for CO 2 Reduction: A Bis-Carbene Ruthenium Terpyridine Catalyst
A ruthenium catalyst bearing a bidentate bis(carbene) ligand is prepared and studied as a catalyst for CO 2 electroreduction. The catalyst [Ru(tpy)(bis-mim)(MeCN)][PF 6 ] 2 (tpy) is 2,2′,:6′,2″-terpyridine; bis-mim is (methylenebis(N-methylimidazol-2-ylidene)) mediates reduction of CO 2 into CO with a turnover frequency of 630 s –1 and Faradaic efficiency (FE) of 30% at an overpotential of 730 mV. The strongly donating bis(carbene) ligand also enables access to a pathway operating at a lower overpotential of ca. 310 mV. While low-overpotential catalysis is slow in the dark (TOF = 0.01 s –1 ), visible light illumination increases the rate 10-fold (TOF = 0.11 s –1 ). Here, a full mechanistic picture is developed using kinetic analysis from cyclic voltammetry, spectroelectrochemistry, and computational methods, with the bis-mim ligand facilitating rapid CO 2 activation at low overpotentials. Comparisons with other ruthenium catalysts yield insight into the ability to tune the rate of chemical steps (e.g., ligand dissociation and CO 2 nucleophilic attack) and the overpotential by tailoring the primary coordination sphere while retaining the “redox-active” tpy ligand.