SEARCH · Search NASA
Results for “Plastic”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Large plasticity in magnesium mediated by pyramidal dislocations
Lightweight magnesium alloys are attractive as structural materials for improving energy efficiency in applications such as weight reduction of transportation vehicles. One major obstacle for widespread applications is the limited ductility of magnesium, which has been attributed to $\langle$c+a$\rangle$ dislocations failing to accommodate plastic strain. We demonstrate, using in situ transmission electron microscope mechanical testing, that $\langle$c+a$\rangle$ dislocations of various characters can accommodate considerable plasticity through gliding on pyramidal planes. We found that submicrometer-size magnesium samples exhibit high plasticity that is far greater than for their bulk counterparts. Small crystal size usually brings high stress, which in turn activates more $\langle$c+a$\rangle$ dislocations in magnesium to accommodate plasticity, leading to both high strength and good plasticity.
Closing the loop on plastics: Biological and hybrid routes for converting plastic waste to polyhydroxyalkanoates
Polyhydroxyalkanoate (PHA) production from plastic-derived substrates offers a promising route to mitigate plastic pollution while reducing dependence on conventional PHA feedstocks. Plastic waste represents an abundant carbon source for microbial fermentation, but efficient conversion remains limited by incomplete deconstruction, inhibitory intermediates, low carbon recovery, and challenges in process integration. Plastic-derived streams contain diverse compounds, including fatty acids, hydrocarbons, fatty alcohols, aldehydes, esters, and aromatic compounds generated during depolymerization. These intermediates can be metabolized by selected microorganisms, particularly Pseudomonas species with versatile fatty-acid and hydrocarbon pathways, as well as Cupriavidus necator and mixed microbial cultures. Unlike reviews that address plastic upcycling or PHA biosynthesis separately, this review focuses on the deconstruction–fermentation interface that governs plastic-to-PHA conversion. It consolidates current progress in plastic deconstruction, substrate conditioning, microbial metabolism, fermentation control, polymer recovery, and techno-economic and life-cycle considerations. Here, by emphasizing substrate composition, biological compatibility, plastic‑carbon recovery, and final polymer quality, the review identifies priorities for scalable and environmentally sustainable PHA production from plastic-derived substrates.
PRISMS-Plasticity: An open-source crystal plasticity finite element software
An open-source parallel 3-D crystal plasticity finite element (CPFE) software package PRISMS-Plasticity is presented here as a part of PRISMS integrated framework. A highly efficient rate-independent crystal plasticity algorithm is implemented along with developing its algorithmic tangent modulus. Additionally, a twin activation mechanism is incorporated into the framework based on an integration point sensitive scheme. The integration of the software as a part of the PRISMS framework is demonstrated. To do so, the integration of the PRISMS-Plasticity software with experimental characterization techniques such as electron backscatter diffraction (EBSD) and synchrotron X-ray diffraction using available open source software packages of DREAM.3D and Neper is elaborated. The integration of the PRISMS-Plasticity software with the information repository of Materials Commons is also presented. The parallel performance of the software is characterized which demonstrates that it scales well for large problems running on hundreds of processors. Various examples of polycrystalline metals with face-centered cubic (FCC), body-centered cubic (BCC), and hexagonal close-packed (HCP) crystals structures are presented to show the capability of the software to efficiently solve crystal plasticity boundary value problems, in addition to integration with preprocessing and postprocessing tools. PRISMS-Plasticity is an important activity within the broader PRISMS Center and future enhancements to PRISMS-Plasticity are planned and will be described.
Life Cycle Assessment of Recycling High-Density Polyethylene Plastic Waste
Increasing production and use of various novel plastics products, a low recycling rate, and lack of effective recycling/disposal methods have resulted in an exponential growth in plastic waste accumulation in landfills and in the environment. To better understand the effects of plastic waste, Life Cycle Analysis (LCA) was done to compare the effects of various production and disposal methods. LCA shows the specific effects of the cradle-to-grave or cradle-to-cradle scenarios for landfill, incineration, and mechanical recycling. The analysis clearly indicates that increasing recycling of plastics can significantly save energy and eliminate harmful emissions of various carcinogens and GHGs into the environment. As recycling increases, the need for virgin-plastic production can be greatly reduced. Furthermore, the results of this study may help improve current mechanical recycling processes as well as potential future recycling methods, such as chemical recycling. Concerns about the current recycling/disposal methods for plastics have brought increasing attention to the waste accumulation problem. However, with the current COVID-19 pandemic, plastic accumulation is expected to increase significantly in the near future. A better understanding of the quantitative effects of the various disposal methods can help guide policies and future research toward effective solutions of the plastic waste problem.
Extraction of Pure Plastic Resins From PCR Plastic Waste by Solvent-Targeted Recovery and Precipitation (STRAP)
For this work, we have been developing a solvent‐based plastic recycling technology called STRAP. The technology is based on dissolving a targeted plastic resin in a specific solvent that does not dissolve other resins. We have demonstrated STRAP in thousands of bench scale experiments for a large variety of wastes. Recently we have demonstrated the technology for PCR, using mixed plastic wastes (MPWs), from a wet Material Recovery Facility (MRF). The process includes (1) infrared (IR) characterization to determine the plastic composition for accurate selection of the solvent to be used for the extraction of the pure resins. (2) Shredding to the right size and aspect ratio required for flowable and fast dissolvable process. (3) Mixing the MPW in the first solvent to dissolve the first resin. (4) Filtration of the solution plastic blend, to separate the nondissolved plastic from the solution. (5) Further filtration of the solution to remove micron‐sized particle of pigments and fibers. (6) Cooling for precipitation. (7) Filtration of pure resins. (8) Drying of a pure resin. (9) Extrusion of the resin to pellets. (10) Generating films or other products from the pure resin. Steps 1–10 can be considered as one‐cycle that extracted the first resin. (11) A second resin can be extracted with a respective solvent from the plastic that did not dissolve in the first cycle and following steps 1–10 described above. The process also includes characterization of interim and final products. The effort includes building a pilot system at 25 kg/h throughput. We will present specific results for various PCR.
Rapid Accumulation of Soil Inorganics on Plastics: Implications for Plastic Degradation and Contaminant Fate
As plastics degrade in the environment, chemical oxidation of the plastic surface enables inorganics to adsorb and form inorganic coatings, likely through a combination of adsorption of minerals and in situ mineral formation. The presence of inorganic coatings on aged plastics has negative implications for plastics fate, hindering our ability to recycle weathered plastics and increasing the potential for plastics to adsorb contaminants. Here, inorganic coatings formed on terrestrially weathered polyethylene were characterized using synchrotron spectroscopy and microscopy techniques across spatial scales including optical microscopy, nano-X-ray-fluorescence mapping (nano-XRF), nano-X-ray absorption near edge structure (nano-XANES), and high-energy resolution fluorescence detected-XANES (HERFD-XANES). Results indicate a heterogeneous elemental distribution and speciation which includes inorganics common to soil terrestrial environments including iron oxides and oxyhydroxides, aluminosilicates, and carbonates.
Gas Bubble Evolution in Polycrystalline UMo Fuels Under Elastic-Plastic Deformation: A Phase-Field Model With Crystal-Plasticity
In monolithic UMo fuels, the interaction between the Al cladding and large gas bubble volumetric swelling causes both elastic-plastic and creep deformation. In this work, a phase-field model of gas bubble evolution in polycrystalline UMo under elastic-plastic deformation was developed for studying the dynamic interaction between evolving gas bubble/voids and deformation. A crystal plasticity model, which assumes that the plastic strain rate is proportional to resolved shear stresses of dislocation slip systems on their slip planes, was used to describe plastic deformation in polycrystalline UMo. Xe diffusion and gas bubble evolution are driven by the minimization of chemical and deformation energies in the phase-field model, while evolving gas bubble structure was used to update the mechanical properties in the crystal plasticity model. With the developed model, we simulated the effect of gas bubble structures (different volume fractions and internal gas pressures) on stress-strain curves and the effect of local stresses on gas bubble evolution. The results show that 1) the effective Young’s modulus and yield stress decrease with the increase of gas bubble volume fraction; 2) the hardening coefficient increases with the increase of gas bubble volume fraction, especially for gas bubbles with higher internal pressure; and 3) the pressure dependence of Xe thermodynamic and kinetic properties in addition to the local stress state determine gas bubble growth or shrinkage. The simulated results can serve as a guide to improve material property models for macroscale fuel performance modeling.
Elastic-plastic analysis of AS4/PEEK composite laminate using a one-parameter plasticity model
A one-parameter plasticity model was shown to adequately describe the plastic deformation of AS4/PEEK (APC-2) unidirectional thermoplastic composite. This model was verified further for unidirectional and laminated composite panels with and without a hole. The elastic-plastic stress-strain relations of coupon specimens were measured and compared with those predicted by the finite element analysis using the one-parameter plasticity model. The results show that the one-parameter plasticity model is suitable for the analysis of elastic-plastic deformation of AS4/PEEK composite laminates.
Life-cycle analysis of recycling of post-use plastic to plastic via pyrolysis
Advanced recycling enables the application of post-use plastics (PUP) to produce valuable industrial chemicals and develop markets for recycled feedstocks. Pyrolysis is one of the most common advanced recycling technologies undergoing industrial-scale implementation for converting PUP. This paper presents a life cycle analysis (LCA) to assess greenhouse gas (GHG) emissions, fossil energy, water consumption, and solid waste impacts of converting PUP into new plastics such as high-density and low-density polyethylene (HDPE and LDPE, respectively). Data was collected from eight plastic pyrolysis companies. This study addresses the impacts of pyrolysis plant size and maturity; two substitution rate (SR) cases of pyrolysis oil with fossil-derived feedstocks in steam crackers (5% and a 20% of pyrolysis oil SR); and potentially avoided emissions from traditional end-of-life (EOL) management. Because the conventional feedstock slate of steam crackers in the Unites States is comprised of 94% gases (a mix of ethane, propane, and butane) and 6% naphtha, the 5% SR case looked at polyethylene (PE) derived from 5% pyrolysis oil, 1% naphtha, and 94% gases; while the 20% SR looked at PE derived from 20% pyrolysis oil and 80% gases. Moreover, the results are presented from two perspectives: 1) steam crackers' and 2) plastic recyclers'. In the recyclers' perspective, the results for the 5% SR showed for each kg of PUP used there was a 23% and 18% decrease in GHG emissions for HDPE and LDPE respectively, while the 20% SR showed a 4% and 3% reduction in GHG emissions for HDPE and LDPE respectively compared to virgin plastic. The 20% SR has lower GHG emissions reductions because there is an added step of hydrotreating the pyrolysis oil to remove chlorine concentrations that is not included in the 5% SR scenario. Furthermore, the 5% SR removes most of the naphtha, a more carbon intense feedstock, and replaces it with PUP-based pyrolysis oil, a less carbon intense feedstock. GHG emissions for PUP pyrolysis could be further reduced by 50% and 131% in the United States and European Union respectively if the GHG emissions of current PUP incineration practices were considered as emission reductions credits.
Circular plastics technologies: pyrolysis of plastics to fuels and chemicals
Pyrolysis technologies are a staple in plastic chemical recycling because of the robustness to contamination and existing infrastructure. Pyrolysis is already considered to be a reasonably mature technology with numerous pilot plants operating to pyrolyze plastic waste into fuels and chemicals. Here this chapter will describe the pyrolysis process and important process parameters, the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, the products derived from different plastics, companies that have successfully scaled pyrolysis recycling, and recent innovations in the technology.
Electrochemical Deconstruction of Ortho-Phthalate Plasticizers and Recovery of Plasticizing Moieties
Electrochemical methods for the direct reduction of alkyl esters have been understudied but provide a potential advantage for addressing specific waste streams given that such strategies often require only a minimal chemical profile. One such waste stream that could benefit from electrochemical remediation is poly(vinyl chloride) (PVC) plastics. PVC recycling often faces challenges due to the complexity of such waste. Solvent-based recycling methods pose several advantages for addressing post-use PVC; however, such methods are complicated by the high amounts of toxic legacy plasticizers (ortho-phthalates) present in PVC. A potential solution to addressing such phthalates is to address them electrochemically, coupled with recovery of the resulting valuable products. Presented herein is an optimized electrochemical method for ester activation that is leveraged to separate and recover the aromatic and alkyl components of ortho-phthalate plasticizers. The resulting aliphatic alcohols may be reused to prepare other non-toxic plasticizers. This electro-degradation method is demonstrated on six phthalates that have been identified to pose health concerns in addition to plasticizers recovered from commercial samples of PVC.
Parametric Study of Cyclic Plasticity Behavior in a Directionally Solidified Superalloy with Partial Recrystallization by Crystal Plasticity Finite Element Simulation
To understand the influence of recrystallization on the low-cycle fatigue behavior of directionally solidified nickel-based DZ4 superalloy, crystal plasticity-based finite element (CPFE) analysis was carried out to study the cyclic plastic behaviors. Using the design of experiments (DOE) technique, a series of CPFE simulations were designed and performed for DZ4 superalloy with recrystallized grains to examine the cyclic plastic shear deformation at the carbide/matrix interface, at the recrystallized grain boundary/matrix, and in the matrix. Seven influence factors, i.e., applied strain, strain ratio, carbide modulus, dwell time, misorientation angle, carbide aspect ratio, and carbide size, were considered, and the effects of which were quantitatively evaluated by the maximum accumulated plastic shear strains via CPFE-based DOE analysis. The results showed that carbide and recrystallized grain boundary had competitively significant effects on fatigue crack initiation. Applied strain was the most influential parameter among all the studied parameters.
Virtual diffraction simulations using the quasi-coarse-grained dynamics method to understand and interpret plasticity contributions during in situ shock experiments
The dynamic deformation response of metallic materials has contributions from dislocations, deformation twinning, and plastic deformation. The current state-of-art techniques can detail the complex mechanistic history of deformation modes under shock loading in real-time using in situ X-ray diffraction (XRD). However, the capability of these experiments to unravel plasticity contributions is challenging due to limitations in interpreting results and the lack of validation from atomistic simulations. Molecular dynamics (MD) simulations can successfully capture various deformation modes in metals and complement experiments using simulated diffractograms at various stages of evolution. However, the difference in length and time scales of MD simulations and experiments is a substantial obstacle in completing and interpreting in situ diffractograms. Therefore, the existing modeling methods require various approximations to model defect evolution and interaction at the mesoscales. However, while using approximations to correlate the peak broadening behavior to the density of dislocations or the shifts/splitting due to the presence of twins, the interpretations of the plasticity contributions from diffractograms are non-trivial, especially when multiple modes of deformation may be operating. This viewpoint discusses combining a mesoscale modeling method called quasi-coarse-grained dynamics and virtual XRD to characterize the plasticity contributions in BCC metals from slip, twinning, and phase transformation behavior. Furthermore, the combined approach shows promise in bridging the mesoscale gap between the capabilities of atomic-scale simulations and in situ experiments to characterize the dynamic deformation of materials.
Classification of Methane Emissions from Industrial Meters, Vintage vs Modern Plastic Pipe, and Plastic-lined Steel and Cast-Iron Pipe (Final Report)
The project focus was to improve the characterization of methane (CH 4 ) emissions currently detailed in the U.S. Environmental Protection Agency (EPA) Greenhouse Gas Inventory (GHGI) for categories of assets within the Natural Gas (NG) distribution system to isolate what is driving inflation or deflation behind current, nationwide, aggregated Emission Factors (EFs). These specific categories included industrial/commercial NG customer meters, modern and vintage plastic pipe, along with plastic-lined steel and cast-iron pipe. CH 4 emission rate data was gathered during 25 sampling campaigns at industrial/commercial meter sites, vintage and modern plastic pipe sites, as well as plastic-lined steel and cast-iron sites located within NG distribution networks.
Multiscale Modeling of Structurally-Graded Materials Using Discrete Dislocation Plasticity Models and Continuum Crystal Plasticity Models
A multiscale modeling methodology that combines the predictive capability of discrete dislocation plasticity and the computational efficiency of continuum crystal plasticity is developed. Single crystal configurations of different grain sizes modeled with periodic boundary conditions are analyzed using discrete dislocation plasticity (DD) to obtain grain size-dependent stress-strain predictions. These relationships are mapped into crystal plasticity parameters to develop a multiscale DD/CP model for continuum level simulations. A polycrystal model of a structurally-graded microstructure is developed, analyzed and used as a benchmark for comparison between the multiscale DD/CP model and the DD predictions. The multiscale DD/CP model follows the DD predictions closely up to an initial peak stress and then follows a strain hardening path that is parallel but somewhat offset from the DD predictions. The difference is believed to be from a combination of the strain rate in the DD simulation and the inability of the DD/CP model to represent non-monotonic material response.
Modeling the role of local crystallographic correlations in microstructures of Ti-6Al-4V using a correlated structure visco-plastic self-consistent polycrystal plasticity formulation
This paper presents a multi-level crystal plasticity-based simulation framework for modeling mechanical response and microstructure evolution of Ti-6Al-4V with α-lath/lamellar microstructures. Here, the model is a correlated structure visco-plastic self-consistent (CS-VPSC) formulation linking three scales: a single crystals micro-scale, a lath/lamellar colony meso-scale, and a lath/lamellar aggregate macro-scale. A selected hardening law for the evolution of critical resolved shear stress per slip system used in CS-VPSC is phenomenological. However, it adjusts the resistances of basal and prismatic slip systems based on the geometry of slip transfer between adjacent lamellae. Consistent with experimental evidences, the resolved shear stress on the pyramidal slip planes is dependent not only on the stress in the direction of slip but also on the two orthogonal shear stress components and the three normal stress components (non-Schmid effects). Electron backscatter diffraction (EBSD) data in conjunction with a procedure relying on α→β phase transformation is used to construct paired variants of α-laths/lamellae satisfying their local crystallographic correlations. The procedure fits volume fractions of individual laths/lamellae with the experimental EBSD data and selects a distribution of habit planes between adjacent variants with respect to the loading direction. The simulation framework is applied to interpret the deformation behavior in tension and compression along two sample directions of Ti-6Al-4V fabricated via laser powder bed fusion. Moreover, the model is used to simulate texture evolution during rolling of the material to large strains. It is demonstrated that the model is capable of predicting plastic anisotropy/asymmetry and the concomitant texture evolution. While the model reveals a significant effect of habit plane inclination with respect to the loading direction on yield stress, the comparison of the data and model predictions shows that a random distribution of habit planes fits the flow response. It is further inferred that the tension-compression asymmetry arises from the non-Schmid effects.