Search NASA⌕ Search

SEARCH · Search NASA

Results for “RHE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Efficient BiVO 4 /CoFeO x H y photoanodes using controlled annealing and conformal linear-sweep electrocatalyst photodeposition

Although monoclinic bismuth vanadate (BiVO 4 ) is a promising photoanode for solar water splitting, its practical use is hindered by imperfect photocurrent generation/collection, low photovoltage compared to the bandgap, and corrosion side reactions that limit durability. Here, we introduce a controlled-annealing sol–gel process for BiVO 4 thin-film photoanodes along with an optimized linear-sweep-voltammetry photodeposition of CoFeO x H y cocatalysts. The resulting BiVO 4 films annealed at 550 °C exhibited a photocurrent density of 4.1 mA/cm 2 at 1.23 V RHE under 1 sun AM 1.5G solar simulation and a low onset potential of 0.26 V RHE due to high majority carrier conductivity, a crystalline bulk with reduced defects as evidenced by x-ray photoelectron spectroscopy and photoluminescence lifetime analysis, and thus enhanced photocarrier collection. However, significant degradation in performance was found due to interfacial photocorrosion. To protect the surface and speed the oxygen-evolution reaction CoFeO x H y cocatalyst layers were deposited. By varying the number of consecutive sweeps and adjusting the applied bias range, an ultra-thin (~15 nm) CoFeO x H y cocatalyst layer was uniformly grown deposited over 30 cycles on the BiVO 4 surface. The resulting BiVO 4 /CoFeO x H y yielded 4.03 mA/cm 2 at 1.23 V RHE and onset potential of 0.24 V RHE , with stable operation (~15 % loss in photocurrent at 1.23 V RHE relative to ~60 % loss in the uncatalyzed control sample). These conformal CoFeO x H y catalytic layers function simultaneously to selectively collect photoexcited holes from the BiVO 4 , catalyze the water-oxidation reaction, and protect the BiVO 4 from photodegradation.

42 ENGINEERING↗
DOE OSTI2022

Methods—A Practical Approach to the Reversible Hydrogen Electrode Scale

Accurately quantifying applied potential is important to ensuring the comparability, accuracy, and precision of electrochemical studies. Reference electrodes (REs) enable knowledge/determination of the applied potential at electrodes in electrochemical systems. Ultimately, the choice of RE will depend on the particular requirements of a given electrochemical system, however, we note it is imperative to ensure the accuracy of the RE potential and its proper translation to a standardized scale. In this work, we highlight that while there are many commercially available REs, these must be experimentally calibrated to a reliable and practical standard potential scale, for instance the reversible hydrogen electrode (RHE) scale for aqueous systems. With representative data, we provide streamlined instructions on how to calibrate any RE to the RHE scale. We also provide guidance to mitigate and/or avoid possible electrolyte contamination issues arising from REs. Moreover, we offer a step-by-step guide on how to build a practical RHE RE, which may be a suitable and desirable option in certain applications. Our work emphasizes the need for the continuous adoption of standardized reference potential scales and demonstrates the versatility of the RHE scale, particularly in aqueous electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Machine Learning-Accelerated First-Principles Molecular Dynamics Reveals C–C Coupling Mechanisms toward Ethylene on Cu(100)

Here, the Cu(100) termination has been identified as the most effective facet for converting CO and CO 2 into ethylene. To enhance both the activity and selectivity of ethylene production, we perform machine-learning-accelerated, first-principles molecular dynamics simulations at 298 K in an explicit solvent at pH 7 to elucidate the C–C coupling mechanism─the critical reaction step in forming C 2+ products. Among the six potential C–C coupling pathways, the most feasible are CO* dimerization and CO – CHO* and CHO* – CHO* couplings. Using the computational hydrogen electrode method, we demonstrate that all three pathways are equally accessible at −0.6 V vs RHE. At a potential below −1.0 V vs RHE, the thermodynamic barriers for the CO – CHO* and CHO* – CHO* pathways become negligible. Our computational findings explain the experimental observations, particularly the absence of C 2+ products above −0.4 V vs RHE and the peaks in ethylene production near −0.6 and −1.0 V vs RHE. Since CHO* acts as a key intermediate common to both C–C coupling and CH 4 formation, we propose that suppressing CHO* hydrogenation would inhibit CH 4 pathways, thereby maximizing ethylene selectivity.

CO2 reduction↗
DOE OSTI2023

Photoelectrochemical and Photovoltaic Performance of As-deposited Ink-based CuInS 2 Heterojunction Thin Film

In this report, we demonstrate low-temperature ink-based fabrication of CuInS 2 -based photoelectrodes for hydrogen production capable of producing photocurrent densities as high as 8.8mA.cm -2 . In this process, molecular ink made of metal chlorides and thiourea dissolved in methanol was spin coated onto Mo-coated soda lime glass substrates. Samples were then placed on a hot plate (sample surface temperature: 250°C) to induce CuInS 2 formation and remove the solvent and by-products. No further processing, such as high temperature sulfurization, was performed. Further, the CuInS 2 films were then integrated as photocathode for hydrogen evolution by photoelectrodeposition of Pt nanoparticles. Photocurrent density of 0.4mA.cm -2 at 0V vs. RHE was detected from such electrodes. However, samples coated with CdS/ZnO/ITO overlayers forming heterojunction prior to Pt deposition exhibited significant improvement of the photocurrent density, reaching 8.8mA.cm -2 at 0V vs. RHE, highlighting the improved charge transfer by the p-n junction formed at the CuInS 2 /CdS interface. The charge transfer resistance of the CuInS 2 /CdS/ZnO/ITO-Pt photoelectrode was almost 5 times lower than that of the CuInS 2 -Pt photoelectrode as revealed by electrochemical impedance spectroscopy analysis. In addition, the onset potential was shifted by ca. 0.45V toward the anodic direction, reaching 0.75V vs. RHE. Solar cell made of identical structure (Mo/CuInS 2 /CdS/ZnO/ITO) showed power conversion efficiency of 2.1% with short-circuit photocurrent density and open circuit voltage of 7.4mA.cm -2 and 820mV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Identifying and Tuning the In Situ Oxygen-Rich Surface of Molybdenum Nitride Electrocatalysts for Oxygen Reduction

Rigorous in situ studies of electrocatalysts are required to enable the design of higher performing materials. Nonplatinum group metals for oxygen reduction reaction (ORR) catalysis containing light elements such as O, N, and C are known to be susceptible to both ex situ and in situ oxidation, leading to challenges associated with ex situ characterization methods. We have previously shown that the bulk O content plays an important role in the activity and selectivity of Mo–N catalysts, but further understanding of the role of composition and morphological changes at the surface is needed. Here, we report the measurement of in situ surface changes to a molybdenum nitride (MoN) thin film under ORR conditions using grazing incidence X-ray absorption and reflectivity. We show that the half-wave potential of MoN can be improved by ~90 mV by potential conditioning up to 0.8 V versus RHE. Utilizing electrochemical analysis, dissolution monitoring, and surface-sensitive X-ray techniques, we show that under moderate polarization (0.3–0.7 V vs RHE) there is local ligand distortion, O incorporation, and amorphization of the MoN surface, without changes in roughness. Furthermore, with a controlled potential hold procedure, we show that the surface changes concurrent with potential conditioning are stable under ORR relevant potentials. Conversely, at higher potentials (≥0.8 V vs RHE), the film incorporates O, dissolves, and roughens, suggesting that in this higher potential regime, the performance enhancements are due to increased access to active sites. Density functional theory calculations and Pourbaix analysis provide insights into film stability and O incorporation as a function of potential. These findings coupled with in situ electrochemical surface-sensitive X-ray techniques demonstrate an approach to studying nontraditional surfaces in which we can leverage our understanding of surface dynamics to improve performance with the rational, in situ tuning of active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Combined Rotating Disk Slurry Electrodeposition–Spontaneous Galvanic Displacement for Pt-M (M = Co, Ni, and Cu) Catalyst Synthesis for the Oxygen Reduction Reaction in Alkaline Media

Here, platinum-modified first-row transition-metal catalyst (M = Ni, Co, and Cu) nanoparticles on a carbon black Vulcan XC-72R (CBV) support were synthesized using rotating disk slurry electrodeposition (RoDSE) followed by spontaneous galvanic displacement (SGD) reactions. These RoDSE–SGD catalysts were evaluated for the oxygen reduction reaction (ORR) in 0.1 M KOH using rotating disk electrode techniques. The Ni and Co RoDSEs were done by using an electrochemical applied potential of -0.75 V versus the RHE and for Cu, -0.80 V versus the RHE using a CBV slurry solution containing 0.1 M KClO 4 . These metal nanoparticles on CBV (M/CBV) catalysts were modified with a Pt precursor via a spontaneous galvanic displacement (SGD) reaction, producing a Pt-M/CBV material to catalyze the ORR in an alkaline medium. High-resolution scanning transmission electron microscopy (HR-STEM) analysis indicates that the PtM/CBV samples include M clusters and Pt single atoms. The ORR characterization measurements were done under a controlled temperature (25.0 °C) and with a mass loading of 100 μg/cm 2 on a glassy carbon (GC) rotating disk electrode at 1600 rpm. The PtCo/CBV showed the highest ORR mass activity of 0.741 A/mgPt at 0.90 V versus the reversible hydrogen electrode (RHE) compared with commercial Pt/CBV. The M/CBV RoDSE catalysts were also tested for the oxygen evolution reaction (OER), and Ni/CBV provided the lowest overpotential of 450 mV at 10 mA/cm 2 disk in 0.1 M KOH.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Effect of Support on Oxygen Reduction Reaction Activity of Supported Iron Porphyrins

In this work, we report the oxygen reduction reaction (ORR) activity in acid of an Fe porphyrin on different supports. While the activity is high (E 1/2 = 0.34 V vs RHE with n = 3.8) when the Fe porphyrin is adsorbed on XC72 (a graphitic carbon), this activity is much lower when the porphyrin is adsorbed on either MoS 2 (E 1/2 = -0.15 V vs RHE with n = 2.2) or g-C 3 N 4 (E 1/2 = -0.24 V vs RHE with n = 3.1). Electron paramagnetic resonance (EPR), X-ray absorption fine structure (XAFS), and magnetometry measurements show the electronic structure around the Fe center is the same for all three supports. Only the Fe porphyrin supported on XC72 exhibits a pH dependence in its ORR activity. This observation, coupled with the increased hydrophilicity of XC72 relative to the other supports, suggests that the support-electrolyte interaction controls the ORR activity. Modification of MoS 2 to increase its hydrophilicity results in a more active ORR catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Aqueous Photoelectrochemical CO 2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

Abstract We report a precious‐metal‐free molecular catalyst‐based photocathode that is active for aqueous CO 2 reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3‐aminopropyl)triethoxysilane linker to p‐type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO 2 to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of −0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s −1 . To date, this is the only molecular catalyst‐based photoelectrode that is active for the six‐electron reduction of CO 2 to methanol. This work puts forth a strategy for interfacing molecular catalysts to p‐type semiconductors and demonstrates state‐of‐the‐art performance for photoelectrochemical CO 2 reduction to CO and methanol.

Shang, Bo↗
DOE OSTI2022

Aqueous Photoelectrochemical CO 2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO 2 reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO 2 to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of –0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s –1 . To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO 2 to methanol. Furthermore, this work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO 2 reduction to CO and methanol.

14 SOLAR ENERGY↗
DOE OSTI2025

Breaking the Linear Scaling Relations for the Oxygen Reduction Reaction with a Dual‐Atom Catalyst Composed of a MnFe‐Porphyrrole Aerogel

Bimetallic catalysts offer enhanced catalytic performance through synergistic interactions between the two metals, allowing them to break the linear scaling relations and reach high electrocatalytic activity. This study presents bimetallic aerogel-based catalyst synthesized as a covalent, three-dimensional framework containing neighboring iron and manganese sites. The aerogel structure provides a high surface area and porosity, facilitating an ultra-high active site density and efficient mass transport. The MnFe porphyrrole's unique structure is obtained by alternately linking Mn-porphyrin and Fe-corrole complexes. It exhibited outstanding performance with an onset potential of 0.99 V RHE . Comparative studies with a free-base Fe porphyrrole catalyst (E onset 0.97 V RHE ) revealed that while Mn incorporation led to only a slight improvement in half-cell performance, it resulted in significantly enhanced performance in anion exchange membrane fuel cell. The MnFe catalyst achieved an OCV of 0.97 V and a peak power density of 0.27 W cm −2 , outperforming the free-base Fe counterpart. Using density functional theory calculations, we show that the higher ORR activity of MnFe-porphyrrole is due to charge transfer between Mn and Fe atoms, which is absent in the reference free-base Fe-porphyrrole. These findings underscore the advantages of bimetallic catalysts in improving ORR activity and fuel cell efficiency by leveraging synergistic effects.

Aerogel↗
DOE OSTI2021

Switching CO 2 Electroreduction Selectivity Between C 1 and C 2 Hydrocarbons on Cu Gas-Diffusion Electrodes

We report that regulating the selectivity toward a target hydrocarbon product is still the focus of CO 2 electroreduction. Here, we discover that the original surface Cu species in Cu gas-diffusion electrodes plays a more important role than the surface roughness, local pH, and facet in governing the selectivity toward C 1 or C 2 hydrocarbons. The selectivity toward C 2 H 4 progressively increases, while CH 4 decreases steadily upon lowering the Cu oxidation species fraction. At a relatively low electrodeposition voltage of 1.5 V, the Cu gas-diffusion electrode with the highest Cu δ+ /Cu 0 ratio favors the pathways of hydrogenation to form CH 4 with maximum Faradaic efficiency of 65.4% and partial current density of 228 mA cm -2 at -0.83 V vs RHE. At 2.0 V, the Cu gas-diffusion electrode with the lowest Cu δ+ /Cu 0 ratio prefers C–C coupling to form C 2+ products with Faradaic efficiency topping 80.1% at -0.75 V vs RHE, where the Faradaic efficiency of C 2 H 4 accounts for 46.4% and the partial current density of C 2 H 4 achieves 279 mA cm -2 . This work demonstrates that the selectivity from CH 4 to C 2 H 4 is switchable by tuning surface Cu species composition of Cu gas-diffusion electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electrocatalytic decarboxylation of carboxylic acids over RuO 2 and Pt nanoparticles

Here, we report electrocatalytic decarboxylation (ECDX) of valeric acid into paraffins, olefins, and alcohols via (non-)Kolbe electrolysis on electrodes with RuO 2 and Pt nanoparticles (NPs) as a greener alternative to thermocatalytic decarboxylation. The turnover frequency of ECDX increases, while the specific activity peaks as RuO 2 NP size increases. These opposing trends make the particle size of ∼ 12 nm the optimum size for ECDX on RuO 2 . Bulk Pt was active for ECDX, while Pt NPs were only active for the oxygen evolution reaction under our conditions. ECDX current efficiency remained constant in the studied potential range on RuO 2 NPs. Esterification was the favored reaction at 2.5 V vs. RHE; however, Kolbe electrolysis was the favored reaction at the expense of the esterification at 4.5 V vs. RHE. This work highlights the performance of nanostructured materials as an alternative to bulk materials as anodes for oxidative upgrading of carboxylic acids.

Kolbe electrolysis↗
DOE OSTI2026

Unraveling the relationship between physicochemical properties of NiFeReOx catalysts and the correlated performance toward electrochemical oxygen evolution reaction

NiFeO x catalysts with single site Re dopants exhibit much higher active and stability toward electrochemical oxygen evolution reaction (OER) compared to traditional NiFeO x catalysts. Nevertheless, the relationship between physicochemical properties of NiFeReO x catalysts and the correlated performance toward OER is unclear, which hampers to enhance the OER performance further. Herein, we prepared a series of NiFeReO x catalysts with different physicochemical properties by treating them at different temperatures (up to 350 °C) and then evaluated their performance toward OER. Here, the results show that heat treatment can convert all metal oxidation states to higher values as well as specific surface areas, which are believed to favor real active site generation and OER activity enhancement. A decrease in activity is observed with the temperature increase at the low current range, and the smallest overpotential of 248 mV at 10 mA cm −2 is achieved with the pristine NiFeReO x catalyst. In contrast, the heat-treated samples possess smaller Tafel slopes and lower charge transfer resistance likely due to enhanced intrinsic activity (from higher oxidation states) and conductivity, which facilitate the reaction kinetics and surpass the pristine sample at a large current density. Additionally, the sample treated at 350 °C exhibits a higher activity at 1000 mA cm −2 (1.68 V vs. RHE compared to pristine sample of 1.92 V vs. RHE); however, it manifests a poorer stability compared to the pristine one due to the imbalance of reconstruction/transformations that occurred on the catalyst surface during OER operation. Our work unravels the relationship between physicochemical properties of NiFeReO x catalysts and the correlated OER performance and provides valuable insights for designing NiFeReO x catalysts with high activity and durability.

Catalyst reconstruction↗
DOE OSTI2023

A framework for understanding efficient diurnal CO 2 reduction using Si and GaAs photocathodes

Integrated solar fuels and photoelectrochemical (PEC) CO 2 reduction (CO 2 R) are promising pathways toward producing value-added chemicals from CO 2 . However, improvements are needed in activity and selectivity as well as in fundamental understanding of device behavior to engender wide deployment. Here, we report two single-junction, integrated photocathodes for PEC CO 2 R based on TOPCon Si and GaAs substrates, which achieve -10 mA cm -2 at -0.33 V vs. RHE with 41% selectivity to C 2+ products and at -0.03 V vs. RHE with 27% selectivity to C 2+ products, respectively. We investigated the viability of a light-mediated strategy to direct selectivity in buried-junction PEC devices and confirmed that these devices could be optimized independently and described by the physics-based models of the individual components. Finally, we designed a framework to assess operational modes for PEC CO 2 R devices and demonstrated this framework under continuous galvanostatic control and variable illumination conditions.

14 SOLAR ENERGY↗
DOE OSTI2021

Effect of Pressure and Temperature on Carbon Dioxide Reduction at a Plasmonically Active Silver Cathode

Here, carbon dioxide reduction at a plasmonically active silver cathode was investigated by varying the pressure and temperature at multiple applied potentials under both dark and illuminated conditions to understand the mechanism of selectivity changes driven by plasmon-enhanced electrochemical conversion. Carbon dioxide partial pressures (P Co 2 ) from 0.2 to 1 atm were studied during linear sweep voltammetry and chronoamperometry at -0.7, -0.9, and -1.1 V RHE . At a given applied overpotential the total current density increased with increasing P Co 2 in both the dark and the light, but there were significant differences in the Tafel behavior between dark and illuminated conditions. The reduction of CO 2 to carbon monoxide (CO) was found to have first-order behavior with respect to P Co 2 at all applied potentials in both the dark and the light, likely indicating no change in the rate-determining step upon illumination. Activity for the hydrogen (H 2 ) evolution reaction decreased with increasing P Co 2 at slightly different rates in the dark and the light at each applied potential, making it unclear if light is influencing CO or H 2 intermediate adsorbate coverage. Both formate and methanol production showed no dependence on P Co 2 under any conditions, but the true reaction orders may be masked by the much higher activity for CO and H 2 at the silver cathode. The investigation of product distribution with temperature at 14, 22, and 32°C at -0.7, -0.9, and -1.1 V RHE in both the dark and the light demonstrated that the selectivity changes observed upon illumination are not caused by local heating of the cathode surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis

The scarcity and high cost of PGM electrocatalysts are the key bottleneck in the mass-scale commercialization of many electrolysis technologies. Bifunctional single-atom electrocatalysts (SACs) are promising alternatives for PGM electrocatalysts in next-generation electrolysis technologies because of their superior intrinsic activity and perfect atom utilization. Regulating the coordination environment of platinum atomic sites identifies their electrocatalytic performance. Therefore, exploring more appropriate supports could facilitate the construction of active and durable electrocatalysts with ultralow noble metal content. Herein, we report on a reliable approach for producing a novel type of SACs composed of atomically dispersed Pt active sites stabilized on defective NiCo layered double hydroxide (Pt/D-NiCo LDH) nanosheets as an ultralow-Pt hybrid electrocatalyst for hydrogen evolution reaction (HER), urea oxidation reaction (UOR), and full urea-water electrolysis. The optimized Pt 1 /D NiCo LDH-24 SAC displays a remarkable HER and UOR performance where it yields a current density of 10 mA cm -2 at 37 mV and 1.25 V vs. RHE for HER and UOR, respectively. Finally, symmetrical urea electrolyzer constructed of Pt 1 /D-NiCo LDH-24 electrodes attains 10 mA cm -2 at a cell voltage of 1.32 V vs. RHE, demonstrating superior activity and durability over 60 h operation when compared to commercial Pt/C( + )||RuO 2 ( - ) system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Semi Transparent Three-Dimensional Macroporous Quaternary Oxynitride Photoanodes for Photoelectrochemical Water Oxidation

Semi transparent three-dimensional macroporous (3DM) photoanodes based on quaternary oxynitrides have the potential to simultaneously realize superior light harvesting and efficient charge transfer in a tandem photoelectrochemical (PEC) cell. A 3DM CaTaO 2 N photoanode was prepared for the first time on a GaN/Al 2 O 3 substrate via a chemical route, and it exhibits a high transmittance of >60% in the wide solar spectrum and a photoresponse onset at −0.3 V versus the reversible hydrogen electrode (V RHE ) under simulated solar illumination. In particular, a plateau photocurrent density of 0.21 mA cm –2 was achieved at a low potential of 0.4 V RHE , which was 1.6-fold and more than 50-fold higher than a two-dimensional macroporous (2DM) CaTaO 2 N/GaN/Al 2 O 3 photoanode and a conventional particle-based CaTaO 2 N/GaN/Al 2 O 3 photoanode, respectively. The bicontinuous, interconnected pore structure within this 3DM film can improve charge carrier separation and collection by reducing the average diffusion distance for minority carriers toward the electrolyte. Optical measurements and simulations verified the enhanced sunlight harvesting in the 3DM photoanode, which was ascribed to the concentrated distribution of the electric field and multiple scattering. Furthermore, this study provides guidance for future synthesis of highly efficient semitransparent 3DM quaternary oxynitride-based photoanodes for a tandem PEC device.

Layers↗
DOE OSTI2021

Electronic Structure, Chemical Bonding and Electrocatalytic Activity of Novel Ba(Fe0.7Ta0.3)O3-d Compounds

Ba(Fe0.7Ta0.3)O3-d (BFTO) compounds were synthesized using conventional, high-temperature solid-state ceramic reaction method by varying the sintering temperature (Ts=1200-1350 °C). The crystal structure, electronic structure and electrocatalytic activity of BFTO compounds were evaluated. Processing temperature induced phase transformations and structural quality influences the electronic structure and electrocatalytic activity of BFTO compounds. At Ts=1200 oC, Ba(Fe0.7Ta0.3)O3-d stabilizes in mixed phase of orthorhombic + rhombohedral phase (Amm2 + R3m). With increasing Ts (=1250 oC), Ba(Fe0.7Ta0.3)O3-d ceramics stabilize in tetragonal + rhombohedral [P4mm + R3m] mixed phase with a variation in the quantity of respective phases. High-resolution X-ray photoelectron spectroscopy of constituent elements, namely, Ba 3d, Fe2p, Ta 4f and O 1s reveal the electronic structure changes due to changes in chemical environment resulted from structural transformation. The electrocatalytic activity of BFTO was evaluated towards hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). Though all the samples demonstrated appreciable electrocatalytic properties, the best electrochemical catalytic activity was shown by BFTO samples sintered at 1350 °C. BFTO-1350 oC showed an onset potential of -0.690 V vs. RHE for HER and an onset potential of 0.73 V vs. RHE for ORR indicating its significant electrocatalytic performance. A general increase in activity with sintering temperature is potentially due to the improved structural quality of the BFTO ceramics. In addition to offering the fundamental insights into solid state materials based on doped BaTiO3 for electrocatalysis, the present work may contribute to the design and development of materials for high-temperature electrocatalytic converters.

Ba(Fe0.7Ta0.3)O3-d, Phase Transformation↗