Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radionuclide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The Risk Assessment Information System Compendium of Ecological Screening Benchmarks for Chemicals and Radionuclides (2025) (Volume I – Text, Radionuclides for all Media, Chemicals for Air and Biota)

The Risk Assessment Information System Ecological Benchmark Tool compiles screening level benchmark values for assessing potential ecological risks posed by chemical and radionuclide contaminants. Drawing from a wide array of federal, state, and international sources, it consolidates benchmarks across environmental media, including soil, water, sediment, air, and biota, and presents values for a broad range of receptors and exposure pathways. The tool includes both effect-based and no-effect thresholds, with media- and organism-specific guidance derived from peer-reviewed literature and regulatory frameworks. By integrating diverse benchmark types into a unified reference, the tool supports consistent, scientifically grounded evaluations in ecological risk assessments and environmental management practices.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Development of Advanced Radionuclide Gamma spectrOmeter-2 (ARGO-2) for Low-level Radionuclide Measurements

A low-level multidimensional gamma spectrometer was recently installed at Pacific Northwest National Laboratory, USA. The spectrometer utilizes a dual-detector design and advanced detection techniques, demonstrating superior detection efficiency/sensitivity. This work details integral components of the system, including the dual-detector design, its shielding, and cosmic veto panels for background reduction. Results from system’s operation in singles and coincidence mode are highlighted.

ARGO, Coincidence measurements, Multidimensional g↗
DOE OSTI2023

Examining the potential for detecting simultaneous noble gas and aerosol samples in the international monitoring system radionuclide network

The purpose of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) is to establish a legally binding ban on nuclear weapon test explosions or any other nuclear explosions. The Preparatory Commission for the CTBT Organization (CTBTO PrepCom) is developing the International Monitoring System (IMS) that includes a global network of 80 stations to monitor for airborne radionuclides upon entry into force of the CTBT. All 80 radionuclide stations will monitor for particulate radionuclides and at least half of the stations will monitor for radioxenon. The airborne radionuclide monitoring is an important verification technology both for the detection of a radionuclide release and in the determination of whether the release event originates from a nuclear explosion as opposed to an industrial use of nuclear materials. Nuclear power plants and many medical isotope production facilities release radioxenon into the atmosphere. Low levels of a few particulate isotopes, such as iodine, may also be released. Detections of multiple isotopes are useful for screening the radionuclide samples for relevance to the Treaty. This paper examines the anticipated joint detections in the IMS of noble gas and particulate isotopes from underground nuclear explosions where breaches in the underground containment vents from low levels to up to 1% of the radionuclide inventory of the resulting fission products to the atmosphere. Detection probabilities are based on 844 simulated release events spaced out at 17 release locations and one year in time. Six different release (venting) scenarios, including two fractionated scenarios, were analyzed. When ranked by detection probability, 11 particulate isotopes and one noble gas isotope ( 133 Xe) appear in the top 20 isotopes for all six release scenarios. Using the 11 particulate isotopes and the one noble gas isotope, the IMS has nearly the same detection probability as when 45 particulate and 4 noble gas isotopes are used. Thus, a limited list of relevant radionuclides may be sufficient for treaty verification purposes. The probability that at least one particulate and at least one radioxenon isotope would be detected in the IMS from the release events ranged from 0.15 to 0.86 depending on the release scenario.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

M3SF-24LL010302052-Comprehensive Analysis of Radionuclide Interaction with Hydrothermally Altered Repository Materials

This progress report (Level 3 Milestone Number M3SF-24LL010302052) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline Work Package Number SF-24LL01030205. The research is focused on actinide and radionuclide sequestration in hydrothermally altered repository materials. In FY24, we completed a rigorous analysis of Se sorption to iron oxide phases using our L-SCIE sorption database. This effort explicitly accounts for surface titration behavior of oxide surfaces that was the subject of a recently published manuscript (Han et al., 2023). With this in mind, our Se sorption analysis now yields a more robust workflow for developing self-consistent surface complexation modeling approaches that can be adapted to specific SCM conceptual and numerical approaches (i.e. non-electrostatic, diffuse layer, triple layer models). In late FY24, we plan to publish the results of our comprehensive surface complexation modeling of Se(IV) and Se(VI) sorption to iron oxide mineral phases and provide a path forward to developing robust radionuclide sorption models for use in performance assessment. In FY24, we also submitted a manuscript summarizing our approach to integrating radionuclide sorption and coprecipitation phenomena and evaluation of radionuclide partitioning values across a range of radionuclides relevant to performance assessment. We demonstrated our approach in detail using Se sorption and coprecipitation with iron oxide minerals as a test case. This manuscript was recently accepted for publication in Applied Geochemistry (Balboni et al., Accepted). We also continued experiments to identify radionuclide interaction with hydrothermally altered crystalline repository and backfill materials. Recent research performed at Los Alamos National Laboratory (LANL) and Sandia National Laboratory (SNL) has provided key insights regarding the hydrothermal alteration behavior of bentonite backfill in the presence of repository materials (steel, concrete, etc.). We are now examining how mineral alteration affects retardation behavior of a suite of radionuclides of interest to repository performance assessment. These experiments also allow us to test the predictive ability of our component additivity approach to surface complexation and ion exchange. Our guiding hypothesis is that a robust surface complexation/ion exchange model and associated database, developed using our L-SCIE approach, can effectively predict changes in radionuclide sorption behavior resulting from the hydrothermal alteration of mineralogy in a repository near field. A short update of results to date is presented below.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Radionuclide Interaction with Hydrothermally Altered Repository Materials (M4SF-23LL010302052)

This progress report (Level 4 Milestone Number M4SF-23LL010302052) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline Activity Number SF-23LL01030205. The research is focused on actinide and radionuclide sequestration in hydrothermally altered repository materials. In FY23, a manuscript was in preparation for publication summarizing our analysis of radionuclide sorption and coprecipitation into Fe oxide phases and evaluation of radionuclide partitioning values across a range of radionuclides relevant to performance assessment. We demonstrated our approach in detail using Se sorption and coprecipitation with iron oxide minerals. These data were presented in our FY22 annual report and will not be repeated here. We also initiated experiments to identify radionuclide interaction with hydrothermally altered crystalline repository and backfill materials. Recent research performed at Los Alamos National Laboratory (LANL) and Sandia National Laboratory (SNL) has provided key insights regarding the hydrothermal alteration behavior of bentonite backfill in the presence of repository materials (steel, concrete, etc.). We are now examining how mineral alteration affects retardation behavior of plutonium and a suite of other radionuclides. These experiments also allow us to test the predictive ability of our component additivity approach to surface complexation and ion exchange. Our guiding hypothesis is that a robust surface complexation/ion exchange model and associated database, developed using our L-SCIE approach, can effectively predict changes in radionuclide sorption behavior resulting from the hydrothermal alteration of mineralogy in a repository near field. A short update of results to date is presented below. A manuscript was also in preparation describing a self-consistent model and approach to simulating Se(IV) and Se(VI) sorption to 5 iron oxide phases based on our L-SCIE community database. This will be the first implementation of a multi-mineral and multi-oxidation state sorption model using our new L-SCIE database and workflow. A short summary of these results is presented below.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

2022 LANL Radionuclide Air Emissions Report (Rev. 2)

This report describes the emissions of airborne radionuclides from operations at Los Alamos National Laboratory (LANL) for calendar year 2022 and the resulting off-site dose from these emissions. This document fulfills the requirements established by the National Emissions Standards for Hazardous Air Pollutants in 40 CFR 61, Subpart H – Emissions of Radionuclides other than Radon from Department of Energy Facilities, commonly referred to as the Radionuclide NESHAP or Rad-NESHAP. Compliance with this regulation and preparation of this document is the responsibility of LANL’s Rad NESHAP compliance program, which is part of the Environmental Protection and Compliance (EPC) Division. The information in this report is required under the Clean Air Act and is being submitted to the U.S. Environmental Protection Agency (EPA) Headquarters and EPA Region 6. The highest effective dose equivalent (EDE) to an off-site member of the public was calculated using procedures specified by the EPA and described in this report. LANL’s EDE was 0.45 for 2022. The annual limit is 10 millirem per year, established by the EPA in 40 CFR 61 Subpart H. All measured air emissions are modeled to a single location, known as the Maximally Exposed Individual (MEI). During calendar year 2022, LANL continuously monitored radionuclide emissions at 27 “major” release points, or stacks. The Laboratory estimates emissions from an additional 34 “minor” release points using radionuclide usage source terms in lieu of stack monitoring. Also, LANL uses an EPA approved network of air samplers around the Laboratory perimeter to monitor ambient airborne levels of radionuclides. To provide data for dispersion modeling and dose assessment, LANL maintains and operates several meteorological monitoring towers. From these various systems, a comprehensive evaluation is conducted to calculate the MEI dose for the Laboratory. The MEI can be any member of the public at any off-site location where there is a residence, school, business, or office. In 2022, this MEI location was a business at 95 Entrada Drive, located in the eastern end of Los Alamos town site. The primary contributors to the off-site dose at this location are the ambient air data at that location combined with radioactive gas emissions from the LANSCE facility and the collected potential emissions from unmonitored (minor) sources. Overall, the MEI dose in 2022 is similar to that which has been observed in recent years, and it remains well below the EPA’s 10 millirem per year limit. Doses reported to the EPA for the past 10 years are shown in Table E1.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Notice of Submittal – 2023 Radionuclide Air Emissions Report for Los Alamos National Laboratory

This report describes the emissions of airborne radionuclides from operations at Los Alamos National Laboratory (LANL) for calendar year 2023 and the resulting off-site dose from these emissions. This document fulfills the requirements established by the National Emissions Standards for Hazardous Air Pollutants in 40 CFR 61, Subpart H – Emissions of Radionuclides other than Radon from Department of Energy Facilities, commonly referred to as the Radionuclide NESHAP or Rad-NESHAP. Compliance with this regulation and preparation of this document is the responsibility of LANL’s Rad NESHAP compliance program, which is part of the Environmental Protection and Compliance (EPC) Division. The information in this report is required under the Clean Air Act and is being submitted to the U.S. Environmental Protection Agency (EPA) Headquarters and EPA Region 6. The highest effective dose equivalent (EDE) to an off-site member of the public was calculated using procedures specified by the EPA and described in this report. LANL’s EDE was 0.43 for 2023. The annual limit is 10 millirem per year, established by the EPA in 40 CFR 61 Subpart H. All measured air emissions are modeled to a single location, known as the Maximally Exposed Individual (MEI). During calendar year 2023, LANL continuously monitored radionuclide emissions at 28 “major” release points, or stacks. The Laboratory estimates emissions from an additional 59 “minor” release points using radionuclide usage source terms in lieu of stack monitoring. Also, LANL uses an EPA approved network of air samplers around the Laboratory perimeter to monitor ambient airborne levels of radionuclides. To provide data for dispersion modeling and dose assessment, LANL maintains and operates several meteorological monitoring towers. From these various systems, a comprehensive evaluation is conducted to calculate the MEI dose for the Laboratory. The MEI can be any member of the public at any off-site location where there is a residence, school, business, or office. In 2023, this MEI location was a business at 129 New Mexico State Road 4 (NM-4), located in the northern end of White Rock. The primary contributors to the off-site dose at this location are the ambient air data at that location combined with the collected potential emissions from unmonitored (minor) sources. Overall, the MEI dose in 2023 is similar to that which has been observed in recent years, and it remains well below the EPA’s 10 millirem per year limit. Doses reported to the EPA for the past 10 years are shown in Table E1.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Modeling glass degradation and release of radionuclides from vitrified waste for performance assessment simulations

The release of radionuclides initially encapsulated in a slowly degrading solid waste form and contained in an eventually corroding canister defines the source term for numerical simulations for the assessment of a geologic repository for high-level radioactive waste. While the details of waste degradation, canister corrosion, and dissolution and mobilization of the radionuclides in pore water include complex chemical reaction and transport processes that are coupled to the thermal, hydrological, microbiological, and mechanical conditions in the repository, the source-term model suitable for use in a numerical performance assessment model should be a defensible abstraction of these mechanisms. We developed a radiological source-term model and implemented it into a non-isothermal flow and transport simulator. While the proposed source-term model is applicable to various waste forms, canister systems, and disposal concepts, we specifically considered radionuclide releases from vitrified high-level waste placed in a cylindrical canister disposed in a deep vertical borehole repository. In this model, waste degradation is a function of temperature, and it can be adjusted to evaluate the influence of and propagate uncertainties in pH, passivation reactions, and chemical conditions as well as geometrical factors. The time-dependent, congruent release of safety-relevant radionuclides present in the decaying inventory is then calculated. Finally, the radionuclides are mobilized by diffusive and advective transport according to the thermo-hydraulic conditions prevailing in the near field of the repository, from where they migrate through the geosphere to the accessible environment. We examine the influence of the source-term model’s parameters on performance assessment calculations through sensitivity and uncertainty propagation analyses, identifying influential factors and confirming the upper bound of their impact. These considerations align with the overarching goal of repository design, which is to demonstrate that engineered and natural barriers can collectively delay radionuclide migration for timescales far exceeding human planning, thereby providing multiple, redundant barriers against environmental contamination.

iTOUGH2↗
DOE OSTI2024

RAIS Slope Factors for Radionuclides

For a given radionuclide, Slope Factors (SFs) represent the ELCR equivalent per unit intake (i.e., ingestion or inhalation) or external exposure of that radionuclide. These SFs are used to convert a radionuclide concentration in soil, air, water, or foodstuffs to a radiation ELCR. The primary use of SFs, also called risk coefficients, is to compute the ELCR resulting from site-related exposures. This is accomplished by multiplying the route-specific SF by the CDI of each radionuclide of potential concern for each route of exposure. Ingestion and inhalation slope factors are central estimates in a linear model of the age-averaged, lifetime attributable radiation cancer incidence (fatal and nonfatal cancer) risk per unit of activity inhaled or ingested, expressed as risk/picocurie (pCi). External exposure SFs are central estimates of lifetime attributable radiation cancer incidence risk for each year of exposure to external radiation from photon-emitting radionuclides distributed uniformly in a thick layer of soil, expressed as risk/year per pCi/gram soil. External exposure SF units can also be risk/year per pCi/square centimeters (cm2) of soil. When combined with site-specific media concentration data and appropriate exposure assumptions, SFs can be used to estimate lifetime cancer risks to members of the general population due to radionuclide exposures. The SFs presented on are updated values from Federal Guidance Report (FGR) 13 supplement using the International Commission on Radiological Protection (ICRP) 107 decay data. The derivation and values are found in “Calculations of Slope Factors and Dose Coefficients” (ORNL, 2014).

Noto, Katie [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2025

Pacific Northwest National Laboratory Facility Radionuclide Emission Points and Sampling Systems

Battelle–Pacific Northwest Division operates numerous research and development laboratories in Washington State. The U.S. Department of Energy (DOE) contracts to Battelle at Richland facilities on both the DOE Hanford Site and the Pacific Northwest National Laboratory (PNNL) Richland campus. These facilities have the potential for radionuclide air emissions. The PNNL contract with DOE also includes operations at the PNNL-Sequim campus in Sequim, where there is also the potential for radionuclide air emissions. This document is a periodic update that describes current PNNL facility emission units and sampling systems. The National Emission Standard for Hazardous Air Pollutants (NESHAP [40 Code of Federal Regulations 61, Subpart H]) requires an assessment of all emission units that have the potential for radionuclide air emissions. Emission units are registered with the State of Washington. Potential emissions from emission units are assessed annually by PNNL staff. Sampling, monitoring, and other regulatory compliance requirements are designated based on the potential to-emit dose criteria, a graded approach to facility-identified potential impact categories, and regulatory requirements. The purpose of this document is to describe the facility radionuclide air emission sampling program and provide current and historical facility emission unit system performance, operation, and design information. For sampled emission units, the building, exhaust unit, control technologies, and sample extraction details are provided. Additionally, applicable configuration drawings, figures, and photographs are included. For non-sampled emission units, emission estimation and radionuclide source details are provided. Site-wide permits for the lowest potential impact category are described. Deregistered/transitioned emission unit details are also provided as necessary for at least 5 years post-closure/transition. Currently, five emission units are sampled continuously for particulate radionuclides at PNNL managed facilities on the PNNL-Richland campus (3 of the 5) and on the Hanford Site (2 of the 5). Four of these units have sampling systems that comply with the American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1–2011 standard for sampling from stacks and ducts of nuclear facilities, and the fifth is grandfathered and compliant with the older ANSI N13.1–1969 standard. In addition, the PNNL-managed Hanford Site 325 Building EP 325-01-S stack is sampled continuously for emissions of tritium. No emissions sampling is required for the single licensed emission unit on the PNNL-Sequim campus.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

M3SF-25LL010302052 - Radionuclide Interaction with Hydrothermally Altered Repository Materials

This progress report (Level 3 Milestone Number M3SF-25LL010302052) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline Host Rock Properties & Processes - LLNL Number SF-25LL01030205. Observed changes in radionuclide sorption after bentonite/clay heating have implications for radionuclide diffusive transport through engineered barriers and must be considered when designing waste disposal repositories. Recent research performed at Los Alamos National Laboratory (LANL) has provided key insights regarding the hydrothermal alteration behavior of bentonite backfill in the presence of repository materials (steel, concrete, etc.). We are examining how this mineral alteration affects retardation behavior of a suite of radionuclides of interest to repository performance assessment. Sorption experiments and data analysis for 233 U were initiated in FY24 following earlier experiments performed on 243 Am, 90 Sr, 137 Cs. In FY25, we completed the 233 U study and initiated and completed a study of 237 Np sorption. Below, we summarize the results and potential impacts of hydrothermal alteration on radionuclide retardation and assess the importance of this process to radionuclide migration from a GHRDC. We also use statistical tools (i.e. PCA) to help us determine the major drivers in affecting changes in measured Kd values induced by hydrothermal alteration. These experiments also allow us to test the predictive ability of our component additivity approach to surface complexation and ion exchange. Our guiding hypothesis is that a robust surface complexation/ion exchange model and associated database can effectively predict changes in radionuclide sorption behavior resulting from the hydrothermal alteration of mineralogy in a repository near field. In November 2024 the paper “Selenium interaction with iron minerals: Quantitative comparison of sorption and coprecipitation impacts on mobility” was published in Applied Geochemistry. A short update of results to date is presented below. In FY25, we also actively supported the DITUSC project, which is part of the EURADII initiative, as associate partners. We are executing the Migration2025 conference and support associated the NEA-TDB and Thermochimie workshops that will provide critical international engagements and develop consensus and synergy in thermodynamics as it relates to supporting the US nuclear waste repository program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Allometric-kinetic model predictions of concentration ratios for anthropogenic radionuclides across animal classes and food selection

Protection of the environment from radiation fundamentally relies on dose assessments for non-human biota. These dose assessments use measured or predicted concentrations of radionuclides in soil or water combined with Concentration Ratios (CRs) to estimate tissue concentrations in animals and plants, yet there is a paucity of CR data relative to the vast number of potential taxa and radioactive contaminants in the environment and their taxon-specific ecosystems. Because there are many taxa each having very different behaviors and biology and many possible bioavailable radionuclides, CRs have the potential to vary by orders-of-magnitude, as often seen in published data. Given the diversity of taxa, the International Commission on Radiological Protection (ICRP) has categorized non-human biota into 12 representative organisms (ROs), while the U.S. Department of Energy (DOE) uses the non-taxon specific categories of terrestrial, riparian, and aquatic animals. The question we examine here is: do these categorizations adequately “represent” the broad diversity of animals? To explore this question, here we analyze an Allometric-Kinetic (A-K) model to calculate radionuclide-specific CRs for common animal classes which are then further subcategorized into herbivores, omnivores, carnivores, and invertebrate detritivores. Comparisons in CRs among animal classes exhibited only small differences, but there was order of magnitude differences between herbivores, carnivores, and especially detritivores, for many radionuclides of interest. These findings suggest that the ICRP ROs and the DOE categories are reasonable, but their accuracy could be improved by including sub-categories related to animal dietary ecology. Finally, comparisons of A-K model predicted CR values to published CRs show order-of-magnitude variations, providing justification for additional studies of assimilation across radionuclides and animal classes.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2023

Radionuclide Waste Disposal: Development of Multi-scale Experimental and Modeling Capabilities (Final Report)

The DOE EPSCoR Implementation project “Radioactive waste management: Development of multi-scale experimental and modeling capabilities” helped to develop a team of scientists and engineers from Clemson University, South Carolina State University, and the University of South Carolina to address the disposition of nuclear wastes and study the transport of radioisotopes from a waste repository in the near and far field. The project involved 20 faculty from the three institutions as well as 13 postdoctoral fellows, 32 graduate students, and 32 undergraduate students and was active from 2014-2019. Additionally, we forged new collaborations with nine researchers from DOE laboratories SRNL, LLNL, and ANL as well as the University of Manchester and the China Academy of Engineering Physics. The overarching goal of the project was to understand the conditions under which important classes of co-reactants, ranging from counter ions in crystal lattices to dissolved oxygen in pores, control the chemistry and transport characteristics of radionuclides in engineered waste forms and natural soils. Our approach was to characterize the time and length scales over which non-equilibrium states are maintained by rate-limiting, or rate-enhancing, reactions between radionuclides and co-reactants due to interactions between physical mass-transfer processes (i.e., advection, diffusion) and (biogeo) chemical reactions. We have focused our project on three specific classes of reactions relevant to radionuclide transport at DOE legacy sites: ion exchange/substitution, ligand complexation, and redox-mediated reactions. Understanding radionuclide migration requires detailed knowledge of how changes to a system – whether engineered or natural – drive the behavior of co-reactants, which in turn provide the geochemical context controlling radionuclide transport. Student engagement and training were a primary focus of the project in order to create a pipeline of researchers who could work in the area of nuclear waste disposition to support the state and the nation. Over the duration of the project we worked with 32 undergraduate, graduated 18 M.S. students and 14 Ph.D. students, and advised 13 postdoctoral fellows. The Ph.D students and postdocs have primarily taken positions at DOE laboratories, academia, and industry. Through our collaborative team, numerous follow on projects have been started with over $5M in sponsored research. Additionally, thus far the team has published 53 peer reviewed papers and given over 75 technical presentations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Presence of aromatic-rich organic matter and its characterization in grout materials: Implications for radionuclide immobilization

Grout materials are commonly used to immobilize low-level radioactive waste. Organic moieties can be unintentionally present in common ingredients used to make these grout waste forms, which may result in the formation of organo-radionuclide species. These species can positively or negatively affect the immobilization efficiency. However, the presence of organic carbon compounds is rarely considered in models or characterized chemically. Here, we quantify the organic pool of grout formulations with and without slag, as well as the individual dry ingredients used to make the grout samples (ordinary Portland cement (OPC), slag and fly ash), including total organic carbon (TOC) and black carbon, followed by aromaticity evaluation and molecular characterization via Electro Spray Ionization Fourier-Transform Ion Cyclotron Resonance Mass Spectrometry (ESI-FTICRMS). All dry grout ingredients contained significant amounts of organic carbon, ranging from 550 mg/kg to 6250 mg/kg for the TOC pool, with an averaged abundance of 2933 ± 2537 mg/kg, of which 60 ± 29% was composed of black carbon. The significant abundance of a black carbon pool implies the presence of the aromatic-like compounds, which was further identified by both phosphate buffer-assisted aromaticity evaluation (e.g., >1000 mg-C/kg as aromatic-like carbon in the OPC) and dichloromethane (DCM) extraction with ESIFTICRMS analysis. Besides aromatic-like compounds, other organic moieties were also detected in the OPC, such as carboxyl-containing aliphatic molecules. While the organic compound only consists of minor fractions of the grout materials investigated, our observations of the presence of various radionuclide-binding organic moieties suggests the potential formation of organo-radionuclides, such as radioiodine, which might be present at lower molar concentrations than TOC. Here, evaluating the role of organic carbon complexation in controlling the disposed radionuclides, especially for those radionuclides with strong association with organic carbon, has important implications for the long-term immobilization of radioactive waste in grout systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Radionuclide measurements of the international monitoring system

The International Monitoring System (IMS) is a unique global network of sensors, tuned to measure various phenomenology, with the common goal of detecting a nuclear explosion anywhere in the world. One component of this network collects measurements of radioactive particulates and gases (collectively known as radionuclides) present in the atmosphere; through this, compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT) can be verified. The radionuclide sub-network consists of 120 sensors across 80 locations, supported by 16 measurement laboratories. All radionuclide stations make use of a form of γ-ray spectroscopy to measure radionuclides from samples; this remains largely unchanged since the network was first established 25 years ago. Advances in sampling and spectroscopy systems can yield improvements to the sensitivity of the network to detect a nuclear explosion. This paper summarises the status of the IMS radionuclide network, the current suite of technology used and reviews new technology that could enhance future iterations, potentially improving the verification power of the IMS.

Goodwin, Matthew A.↗
DOE OSTI2025

DICER: A new instrument at LANSCE to constrain neutron capture rates on radionuclides

With very few exceptions, direct measurements of neutron capture rates on radionuclides have not been possible. A number of indirect methods have been pursued such as the surrogate method, the γ-ray strength function method, the Oslo method and the β-Oslo method. Substantial effort has been devoted to quantify the usually large systematic errors that accompany the results from these techniques. A new instrument has been developed at the Los Alamos Neutron Science Center (LANSCE) to provide more accurate data on several radionuclides relevant to nuclear criticality safety, radiochemical diagnostics, astrophysics, nuclear forensics and nuclear security, by measuring the transmission of neutrons through radioactive samples and studying resonance properties. The Device for Indirect Capture on Radionuclides (DICER) and associated radionuclide production at the Isotope Production Facility (IPF), both at LANSCE, as well radioactive sample fabrication, have been under development the last few years. A description of the new apparatus, data on a few mid-weight stable isotopes and efforts on radionuclide measurements will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Quantifying the Impact of Excluding the Submersion Exposure Route for Existing Superfund Radionuclide Screening Level Calculator Soil and Tap Water Models

The U.S. Environmental Protection Agency (EPA) provides initial data screening guidelines for radionuclide-contaminated Superfund sites using preliminary remediation goals (PRGs) and dose compliance concentrations (DCCs). PRGs and DCCs are target concentration values based on acceptable excess lifetime cancer risk and annual dose limits, respectively. They are calculated for various environmental media that may be encountered by residential and worker land uses. PRGs and DCCs typically consist of multiple exposure routes. One of these routes is submersion, which is exposure to a gaseous or particulate radionuclide that is suspended in air. Currently, submersion is only included in air calculations. This study focused on determining whether factoring submersion into total PRG/DCC calculations for soil and tap water created a significant difference in the target concentrations. New equations for individual submersion PRGs/DCCs for each land use of interest for soil and tap water were developed. A wind-driven particulate emission factor and Andelman’s constant were used to model the amount of soil and vapor in the air from soil and household use of tap water, respectively. The submersion PRG/DCC was then included in the total PRG/DCC for each radionuclide, followed by a percent difference comparison of the old and new totals to quantify the impact of the change. For total soil PRGs/DCCs, with and without submersion, the difference was less than 1 percent; however, many of the tap water radionuclides analyzed – including multiple radon and polonium isotopes – showed as high as a 200 percent difference.This technical memorandum (TM) presents recommendations for updates to current EPA guidelines for initial data screens of radionuclide contaminated tap water.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗