SEARCH · Search NASA
Results for “Redox control”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Method for identification of redox control parameters for corrosion mitigation in molten fluoride salts
Structural material corrosion is a significant concern for the development of molten salt-cooled reactors (MSR) and redox control was proposed to mitigate the corrosion. This study presents an efficient approach to identify the partial pressure of F 2 gas for fluorine driven corrosion, the concentration ratios of UF 4 /UF 3 and ZrF 4 /ZrF 2 , and the partial pressure ratio of HF/H 2 needed to limit metal corrosion and its subsequent dissolution in molten fluoride salts. The identification procedure is made by simply using auxiliary axes in Ellingham diagrams. This approach greatly simplifies the optimization of redox control methods in studying the material corrosion in molten salts.
Radiolytic evaluation of a new technetium redox control reagent for advanced used nuclear fuel separations
Technetium is a problematic radioisotope for used nuclear fuel (UNF) and subsequent waste management owing to its high environmental mobility and coextraction in reprocessing technologies as the pertechnetate anion (TcO 4 - ). Consequently, several strategies are under development to control the transport of this radioisotope. A proposed approach is to use diaminoguanidine (DAG) for TcO 4 - and transuranic ion redox control. Although the initial DAG molecule is ultimately consumed in the redox process, its susceptibility to radiolysis is currently unknown under envisioned UNF reprocessing conditions, which is a critical knowledge gap for evaluating its overall suitability for this role. To this end, we report the impacts of steady-state gamma irradiation on the rate of DAG radiolysis in water, aqueous 2.0 M nitric acid (HNO 3 ), and in a biphasic solvent system composed of aqueous 2.0 M HNO 3 in contact with 1.5 M N,N-di-(2-ethylhexyl)isobutyramide (DEHiBA) dissolved in n-dodecane. In addition, we report chemical kinetics for the reaction of DAG with key transients arising from electron pulse radiolysis, specifically the hydrated electron (e aq - ), hydrogen atom (H ˙ ), and hydroxyl ( ˙ OH) and nitrate (NO 3 ˙ ) radicals. The DAG molecule exhibited significant reactivity with the ˙ OH and NO 3 ˙ radicals, indicating that oxidation would be the predominant degradation pathway in radiation environments. This is consistent with its role as a reducing agent. Steady-state gamma irradiations demonstrated that DAG is readily degraded within a few hundred kilogray, the rate of which was found to increase upon going from water to HNO 3 containing solutions and solvents systems. This was attributed to a thermal reaction between DAG and the predominant HNO 3 radiolysis product, nitrous acid (HNO 2 ), k(DAG + HNO 2 ) = 5480 ± 85 M -1 s -1 . Although no evidence was found for the radiolysis of DAG altering the radiation chemistry of the contacted DEHiBA/n-dodecane phase in the investigated biphasic system, the utility of DAG as a redox control reagent will likely be limited by significant competition with its degradation by HNO 2 .
Compatibility of Type 304H Stainless Steel in Static Molten FLiBe for Inertial Confinement Fusion Reactors: Role of Impurities and Redox Control
Molten fluoride salts, such as FLiBe (LiF-BeF2), are promising candidates for tritium breeding and heat transfer in fusion reactors, but corrosion of structural materials remains a major challenge. This study investigates the corrosion behavior of austenitic stainless steel 304H in purified and NiF2-containing FLiBe at 500°C and 600°C, focusing on the effects of impurities and redox control. Exposure to purified FLiBe resulted in the concurrent depletion of Cr, Mn, and Fe, with corrosion at 500 °C dominated by the combined oxide formation and elemental dissolution, while at 600°C elemental depletion was predominant. The addition of a controlled NiF2 impurity significantly accelerated corrosion at both temperatures, demonstrating the sensitivity of 304H to the salt redox state. Beryllium additions were effective in mitigating corrosion for both baseline and NiF2-containing FLiBe; minimal depletion of Cr, Mn, and Fe occurred with Be additions as low as 2.5 mg (147 wppm), and no NiBe intermetallics formed at 5 mg (294 wppm), indicating that small Be inventories can provide substantial protection without deleterious phase formation. Thermodynamic equilibrium and coupled thermodynamic-kinetic analyses at the salt-alloy interface suggested low corrosion rates in systems with limited hydrogen fluoride (HF) generation, highlighting the importance of salt redox control. Estimates for a Be addition rate were calculated for the HYLIFE-II fusion reactor that can mitigate corrosion-induced degradation, assuming complete conversion of tritium to tritium fluoride (TF). Overall, 304H shows reasonable compatibility with FLiBe under optimized redox conditions. These results provide quantitative guidance for material selection and salt management in fusion blanket and heat exchanger systems and motivate validation under flowing, nonisothermal, and irradiated conditions.
Redox-controlled reorganization and flavin strain within the ribonucleotide reductase R2b–NrdI complex monitored by serial femtosecond crystallography
Redox reactions are central to biochemistry and are both controlled by and induce protein structural changes. Here, we describe structural rearrangements and crosstalk within the Bacillus cereus ribonucleotide reductase R2b–NrdI complex, a di-metal carboxylate-flavoprotein system, as part of the mechanism generating the essential catalytic free radical of the enzyme. Femtosecond crystallography at an X-ray free electron laser was utilized to obtain structures at room temperature in defined redox states without suffering photoreduction. Together with density functional theory calculations, we show that the flavin is under steric strain in the R2b–NrdI protein complex, likely tuning its redox properties to promote superoxide generation. Moreover, a binding site in close vicinity to the expected flavin O 2 interaction site is observed to be controlled by the redox state of the flavin and linked to the channel proposed to funnel the produced superoxide species from NrdI to the di-manganese site in protein R2b. These specific features are coupled to further structural changes around the R2b–NrdI interaction surface. The mechanistic implications for the control of reactive oxygen species and radical generation in protein R2b are discussed
Shifting mineral and redox controls on carbon cycling in seasonally flooded mineral soils
Although wetland soils represent a relatively small portion of the terrestrial landscape, they account for an estimated 20%–30% of the global soil carbon (C) reservoir. C stored in wetland soils that experience seasonal flooding is likely the most vulnerable to increased severity and duration of droughts in response to climate change. Redox conditions, plant root dynamics, and the abundance of protective mineral phases are well-established controls on soil C persistence, but their relative influence in seasonally flooded mineral soils is largely unknown. To address this knowledge gap, we assessed the relative importance of environmental (temperature, soil moisture, and redox potential) and biogeochemical (mineral composition and root biomass) factors in controlling CO 2 efflux, C quantity, and organic matter composition along replicated upland–lowland transitions in seasonally flooded mineral soils. Specifically, we contrasted mineral soils under temperature deciduous forests in lowland positions that undergo seasonal flooding with adjacent upland soils that do not, considering both surface (A) and subsurface (B and C) horizons. We found the lowland soils had lower total annual CO 2 efflux than the upland soils, with monthly CO 2 efflux in lowlands most strongly correlated with redox potential (E h ). Lower CO 2 efflux as compared to the uplands corresponded to greater C content and abundance of lignin-rich, higher-molecular-weight, chemically reduced organic compounds in the lowland surface soils (A horizons). In contrast, subsurface soils in the lowland position (C g horizons) showed lower C content than the upland positions (C horizons), coinciding with lower abundance of root biomass and oxalate-extractable Fe (Fe o , a proxy for protective Fe phases). Our linear mixed-effects model showed that Fe o served as the strongest measured predictor of C content in upland soils, yet Fe o had no predictive power in lowland soils. Instead, our model showed that E h and oxalate-extractable Al (Al o , a proxy of protective Al phases) became significantly stronger predictors in the lowland soils. Combined, our results suggest that low redox potentials are the primary cause for C accumulation in seasonally flooded surface soils, likely due to selective preservation of organic compounds under anaerobic conditions. In seasonally flooded subsurface soils, however, C accumulation is limited due to lower C inputs through root biomass and the removal of reactive Fe phases under reducing conditions. Our findings demonstrate that C accrual in seasonally flooded mineral soil is primarily due to low redox potential in the surface soil and that the lack of protective metal phases leaves these C stocks highly vulnerable to climate change.
Interface‐Controlled Redox Chemistry in Aqueous Mn 2 ⁺/MnO₂ Batteries
Manganese dioxide (MnO 2 ) deposition/dissolution (Mn 2+ /MnO 2 ) chemistry, involving a two-electron-transfer process, holds promise for safe and eco-friendly large-scale energy storage. However, challenges like electrode/electrolyte interface environment fluctuations (H + and H 2 O activity), irreversible Mn degradation, and limited understanding of degradation mechanisms hinder the reversibility of the Mn 2+ /MnO 2 conversion. This study demonstrates a vanadyl/pervanadyl (VO 2+ /VO 2 + ) redox-mediated interface designed for high-energy Mn 2+ /MnO 2 batteries. Unlike flow systems, this work uncovers, for the first time, the mechanism of a static redox-mediated interface in regulating interfacial H + and H 2 O activities. Significantly, the VO 2+ /VO 2 + chemical redox mediation targets Mn 3+ intermediates, suppressing their hydrolysis and enabling 100% Mn 2+ /MnO 2 conversion. The redox-mediated interface enhances the Mn redox electron transfer process, achieving a stable ≈95% coulombic efficiency and ultrahigh capacity of 100 mAh cm −2 with an areal energy density of 111 mWh cm −2 , outperforming flow systems. The electrode also exhibits an average specific capacity of 593 mAh g −1 , approaching the theoretical limit of 616 mAh g −1 , and a specific energy density of 721 Wh kg −1 at high MnO 2 loadings (50–150 mg cm −2 ). Furthermore, the findings highlight the critical role of interfacial redox mediation in regulating H + and H 2 O activities and underscore the significance of interface dynamics.
Tandem bulk oxygen diffusion and surface reactions in reducible metal oxides control redox cycle dynamics
The interplay between bulk oxygen diffusion and surface reactions in reducible metal oxides is key in heterogeneous catalysts, but direct measurements of oxygen mobility, transient kinetics, and in situ spectroscopies have been lacking. Here, we reveal complex dynamic behavior of ceria-zirconia by H 2 using transient kinetics via mass spectrometry and in situ Raman and near-ambient pressure x-ray photoelectron spectroscopies. Molecular dynamics simulations with a machine learning potential delineate competitive oxygen diffusion mechanisms, with an optimal mobility at intermediate reductions. We expose a compensation between vacancy availability and lattice distortion at intermediate to high reductions and Frenkel defects at low reductions, underscoring a potential deficiency of 16 O/ 18 O exchange experiments in deducing oxygen mobility. Vacancies in proximity require electron localization on Ce atoms further away. The continuous replenishment of surface oxygen results in a varying reduction rate, with H 2 dissociation being the rate-limiting step. Multiscale transient simulations, consistent with experiments, indicate catalysts of potentially spatially varying oxidation states. The approach is broadly applicable to reducible oxide materials.
Active Redox Control of Molten Salts For Fusion Blankets
Commonwealth Fusion Systems (CFS) is working to risk-retire aspects of technologies related to Fusion Energy System (FES) blanket technology. CFS is actively investigating the molten salt LiF-BeF 2 (FLiBe), a novel blanket material, for fusion energy machines.
Electrochemical corrosion under controlled redox conditions
A method for predicting corrosion rates of a material during service conditions is provided, the method having the steps of determining a first phase composition of the material; exposing the material to service conditions chemical environment; applying an electrical potential to the exposed material to represent the solution redox; identifying ranges of the applied potential that correspond to different corrosion behaviors of the material; quantifying current and surface electrical properties during corrosion; and determining a second phase composition of the material to identify corroded phases. Also provided is a method for determining radionuclide source terms, the method having the steps of supplying a multiphase metallic waste containing the radionuclides; immersing the waste in a solution representing repository chemistry conditions; and oxidizing the immersed waste for a period of time and at particular imposed voltages representing solution redox values to establish a steady current representing corrosion rate of the waste.
Redox Fluctuations Control the Coupled Cycling of Iron and Carbon in Tropical Forest Soils
In this paper, oscillating redox conditions are a common feature of humid tropical forest soils, driven by an ample supply and dynamics of reductants, high moisture, microbial oxygen consumption, and finely textured clays that limit diffusion. However, the net result of variable soil redox regimes on iron (Fe) mineral dynamics and associated carbon (C) forms and fluxes is poorly understood in tropical soils. Using a 44-day redox incubation experiment with humid tropical forest soils from Puerto Rico, we examined patterns in Fe and C transformations under four redox regimes: static anoxic, "flux 4-day" (4d oxic, 4d anoxic), "flux 8-day" (8d oxic, 4d anoxic) and static oxic. Prolonged anoxia promoted reductive dissolution of Fe-oxides, and led to an increase in soluble Fe(II) and amorphous Fe oxide pools. Preferential dissolution of the less-crystalline Fe pool was evident immediately following a shift in bulk redox status (oxic to anoxic), and coincided with increased dissolved organic C, presumably due to acidification or direct release of organic matter (OM) from dissolving Fe(III) mineral phases. The average nominal oxidation state of water-soluble C was lowest under persistent anoxic conditions, suggesting that more reduced organic compounds were metabolically unavailable for microbial consumption under reducing conditions. Anoxic soil compounds had high H/C values (and were similar to lignin-like compounds) whereas oxic soil compounds had higher O/C values, akin to tannin- and cellulose-like components. Cumulative respiration derived from native soil organic C was highest in static oxic soils. These results show how Fe minerals and Fe-OM interactions in tropical soils are highly sensitive to variable redox effects. Shifting soil oxygen availability rapidly impacted exchanges between mineral-sorbed and aqueous C pools, increased the dissolved organic C pool under anoxic conditions implying that the periodicity of low-redox events may control the fate of C in wet tropical soils.
Linker Redox Mediated Control of Morphology and Properties in Semiconducting Iron-Semiquinoid Coordi
Explore the source record for details and available documents.
Redox Gating for Colossal Carrier Modulation and Unique Phase Control
Redox gating, a novel approach distinct from conventional electrolyte gating, combines reversible redox functionalities with common ionic electrolyte moieties to engineer charge transport, enabling power-efficient electronic phase control. This study achieves a colossal sheet carrier density modulation beyond 10 16 cm -2 , sustainable over thousands of cycles, all within the sub-volt regime for functional oxide thin films. The key advantage of this method lies in the controlled injection of a large quantity of carriers from the electrolyte into the channel material without the deleterious effects associated with traditional electrolyte gating processes such as the production of ionic defects or intercalated species. The redox gating approach offers a simple and practical means of decoupling electrical and structural phase transitions, enabling the isostructural metal-insulator transition and improved device endurance. The versatility of redox gating extends across multiple materials, irrespective of their crystallinity, crystallographic orientation, or carrier type (n- or p-type). This inclusivity encompasses functional heterostructures and low-dimensional quantum materials composed of sustainable elements, highlighting the broad applicability and potential of the technique in electronic devices.
Electronic control of redox reactions inside Escherichia coli using a genetic module
Microorganisms regulate the redox state of different biomolecules to precisely control biological processes. These processes can be modulated by electrochemically coupling intracellular biomolecules to an external electrode, but current approaches afford only limited control and specificity. Here we describe specific electrochemical control of the reduction of intracellular biomolecules in Escherichia coli through introduction of a heterologous electron transfer pathway. E . coli expressing cymAmtrCAB from Shewanella oneidensis MR-1 consumed electrons directly from a cathode when fumarate or nitrate, both intracellular electron acceptors, were present. The fumarate-triggered current consumption occurred only when fumarate reductase was present, indicating all the electrons passed through this enzyme. Moreover, CymAMtrCAB-expressing E . coli used current to stoichiometrically reduce nitrate. Thus, our work introduces a modular genetic tool to reduce a specific intracellular redox molecule with an electrode, opening the possibility of electronically controlling biological processes such as biosynthesis and growth in any microorganism.
Viability of Cathodic Protection for Preventing Corrosion of Stainless Steel 316H in Molten LiF-NaF-KF
Molten fluoride salts are candidate heat transfer fluids in a number of applications such as generation IV molten salt nuclear reactors and concentrated solar power plants. However, a chief concern in the design of these systems is the corrosion of structural materials that come in contact with these molten salts. Redox control methods such as the purification of salt, the addition of active elements, and applied electrochemical potential can be efficient methods for preventing the corrosion of structural materials in molten fluoride salts. Applied electrochemical potential as a redox control method for application in molten fluoride salts has rarely been explored. This study seeks to understand the viability of impressed current cathodic protection (CP) at various currents as a redox control method to prevent corrosion of stainless steel 316H in molten LiF-NaF-KF (FLiNaK) salt. Results show that application of CP can be an effective method to prevent corrosion of SS316H in molten FLiNaK salt, but the applied current will have to be optimized to prevent undesirable side effects such as reduction of salt constituents, salt deposition on electrodes, etc.
Redox Mediated Control of Electrochemical Potential in Liquid Cell Electron Microscopy
Liquid cell electron microscopy enables the study of nanoscale transformations in solvents with high spatial and temporal resolution, but for the technique to achieve its potential requires a new level of control over the reactivity caused by radical generation under electron beam irradiation. An understanding of how to control electron-solvent interactions is needed to further advance the study of structural dynamics for complex materials at the nanoscale. Additionally, we developed an approach that scavenges radicals with redox species that form well-defined redox couples and control the electrochemical potential in situ . This approach enables the observation of electrochemical structural dynamics at near-atomic resolution with precise control of the liquid environment. Analysis of nanocrystal etching trajectories indicates that this approach can be generalized to several chemical systems. The ability to simultaneously observe heterogeneous reactions at near-atomic resolution and precisely control the electrochemical potential enables the fundamental study of complex nanoscale dynamics with unprecedented detail.
Linker Redox Mediated Control of Morphology and Properties in Semiconducting Iron‐Semiquinoid Coordination Polymers**
Abstract The emergence of conductive 2D and less commonly 3D coordination polymers (CPs) and metal–organic frameworks (MOFs) promises novel applications in many fields. However, the synthetic parameters for these electronically complex materials are not thoroughly understood. Here we report a new 3D semiconducting CP Fe 5 (C 6 O 6 ) 3 , which is a fusion of 2D Fe‐semiquinoid materials and 3D cubic Fe x (C 6 O 6 ) y materials, by using a different initial redox‐state of the C 6 O 6 linker. The material displays high electrical conductivity (0.02 S cm −1 ), broad electronic transitions, promising thermoelectric behavior ( S 2 σ=7.0×10 −9 W m −1 K −2 ), and strong antiferromagnetic interactions at room temperature. This material illustrates how controlling the oxidation states of redox‐active components in conducting CPs/MOFs can be a “pre‐synthetic” strategy to carefully tune material topologies and properties in contrast to more commonly encountered post‐synthetic modifications.