Search NASA⌕ Search

SEARCH · Search NASA

Results for “SILICON COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Silicon compounds in the Jupiter atmosphere

The formation of colored silicon compounds under nonequilibrium conditions is discussed with reference to the composition of the Jupiter atmosphere. It is shown that many of these reactions produce strongly colored intermediates that are relatively stable and similar in appearance to those observed on Jupiter. It is suggested that the silicon compounds could substantially contribute to the colors observed on Jupiter. The colored intermediates may be the result of relatively rapid amorphous silicon monoxide formation in vertical atmospheric currents in the region near the red spot and in the red spot itself.

Howland, G.↗

Direct mass spectrometric identification of silicon oxychloride compounds

Silicon oxychloride compounds formed during the high temperature reaction of Si and SiC with Cl2/O2 mixtures at 930 and 950 C have been directly observed with an atmospheric pressure mass spectrometer sampling system. Molecules with the formulas Si2OCl6 and Si3OCl8 have been identified. These compounds are very likely formed by a gas phase reaction between the oxygen gas in the system and silicon tetrachloride which is produced by chlorination of the silicon-based material.

Marra, John E.↗

Effects of organic silicon compounds on syngas auto-ignition behavior

Siloxanes are a significant impurity in syngas feedstocks and an important source of silicon in combustion synthesis applications. However, little is known regarding the fundamental combustion chemistry of siloxane compounds. The impact of two organic silicon species with different but related chemical structures, trimethylsilanol (TMSO) and hexamethyldisiloxane (HMDSO), on syngas auto-ignition behavior was investigated in this study using physical and computational experiments. A rapid compression facility (RCF) was used to create temperatures of 1010–1070 K and pressures of 8–10.3 atm for auto-ignition experiments. Experiments with trace concentrations of TMSO (100 ppm, mole basis) or HMDSO (100 ppm) were added to a surrogate syngas blend (CO and H 2 with a molar ratio of 2.34:1, air levels of dilution, with molar equivalence ratios of Φ = 0.1). The measured ignition delay times showed both siloxane species promote ignition behavior with TMSO yielding faster ignition delay times by approximately 37% and HMDSO yielding faster times by approximately 50% compared with the reference syngas mixture which contained no siloxanes. A computational study was conducted to interpret the results of the ignition experiments. Due to the fact that detailed chemistry does not exist for these organo-silicon compounds, the effects of the addition of CH 3 , H, and OH radicals to H 2 and CO mixtures were explored to simulate the potential rapid decomposition of the siloxanes in the H 2 and CO system. Addition of the radicals decreased the predicted ignition delay times when compared with the H 2 and CO mixture simulations without the radical species, but the simulations did not fully capture the behavior observed in the experiments, indicating the siloxane chemistry is more complex than providing a rapid source of radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Technique for Reducing the Outgassing of Silicone Compounds

A technique was developed to heat silicone resins in vacuum and thereby remove the low molecular weight molecules which contribute to the high outgassing of the untreated resins. The technique was successfully applied to two silicone resins. Heating the monomer to a temperature about 398 K (125 C) in a vacuum of about 0.0001 N/sq m removes about 10% of the resin weight, and the resultant resin when catalyzed can meet the outgassing requirements when tested according to ASTM E-595. The physical properties of RTV-615 when devolatilized at 398 K (125 C) or at 423 K (150 C) were measured.

J J Park↗

Lewis Acidity of Bis(perfluorocatecholato)silane: Aldehyde Hydrosilylation Catalyzed by a Neutral Silicon Compound

Bis(perfluorocatecholato)silane Si(cat( F ) 2 was prepared, and stoichiometric binding to Lewis bases was demonstrated with fluoride, triethylphosphine oxide, and N,N'-diisopropylbenzamide. The potent Lewis acidity of Si(cat( F ) 2 was suggested from catalytic hydrosilylation and silylcyanation reactions with aldehydes. Mechanistic studies of hydrosilylation using an optically active silane substrate, R-(+)-methyl-(1-naphthyl)phenylsilane, proceeded with predominant stereochemical retention at silicon, consistent with a carbonyl activation pathway. The enantiospecificity was dependent on solvent and salt effects, with increasing solvent polarity or addition of NBu 4 BAr( F ) 4 leading to a diminished enantiomeric ratio. The medium effects are consistent with an ionic mechanism, wherein hydride transfer occurs prior to silicon-oxygen bond formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved mold release for filled-silicone compounds

Ceramic and filled-plastic materials used for fabrication of tiles are relatively brittle and easily break as they are being removed from molds. Dusting mold surfaces with commercially available glass microspheres provides mold release superior to existing spray releases. Glass-microsphere dusting also permits removal of uncured tile which has very little strength.

Accountius, O. E.↗

Shock-tube studies of silicon-compound vapors

Test gas mixtures containing SiO, SiO2, Si2, and SiH were produced in a shock tube by processing shock waves through a mixture of SiCl4 + N2O + Ar, SiH4 + Ar, or SiH4 + O2 + Ar. Absorption spectra of the test gases were studied photographically in the reflected shock region using a xenon flash lamp as the light source in the range of wavelengths between 250 and 600 nm. SiO was found to be a dominant species in the vapors produced by the SiCl4 + N2O and SiH4 + O2 mixtures. Spontaneous combustion was observed in the SiH4 + O2 + Ar mixture prior to the shock arrival, and the resulting solid SiO2 particles evaporated behind the shock wave. Spectral absorption characteristics of SiO, SiO2, Si2, and SiH were determined by studying the test gases.

Park, C.↗

Characterization of elastomeric materials with application to design

Redesign of the Space Shuttle Solid Booster has necessitated re-evaluation of the material used in the field joint O-ring seals. The viscoelastic characteristics of five candidate materials were determined. The five materials are: two fluorocarbon compounds, two nitrile compounds, and a silicon compound. The materials were tested in a uniaxial compression test to determine the characteristic relaxation functions. These tests were performed at five different temperatures. A master material curve was developed for each material from the experimental data. The results are compared to tensile relaxation tests. Application of these results to the design analysis is discussed in detail.

Bower, Mark V.↗

Viscoelastic properties of elastomeric materials for O-ring applications

Redesign of the Space Shuttle Solid Rocket Booster necessitated re-evaluation of the material used in the field joint O-ring seals. This research project was established to determine the viscoelastic characteristics of five candidate materials. The five materials are: two fluorocarbon compounds, two nitrile compounds, and a silicon compound. The materials were tested in a uniaxial compression test to determine the characteristic relaxation functions. These tests were performed at five different temperatures. A master material curve was developed for each material from the experimental data. The results of this study are compared to tensile relaxation tests. Application of these results to the design analysis is discussed in detail.

Bower, Mark V.↗

Modifying a silicone potting compound for space flight applications

RTV-615 has been devolatilized by subjecting the uncatalyzed resin to a temperature of between 125 and 150 C for 24 hours in a vacuum of about 10 to the -6th torr. The resultant resin can be catalyzed and after a room temperature cure the outgassing of the resin is sufficiently low when tested according to ASTM E-595 that it is suitable for space flight use. Tests of physical properties of the cured devolatilized resin were compared with those of the as received silicone. The devolatilized silicones are slightly harder, have a higher tear resistance and higher tensile strengths.

Park, J. J.↗

Lifetime Extension of the Gas Discharge Detectors with Plasma Etching of Silicon Deposits in 80%CF{sub 4} + 20%CO{sub 2}

A method of elimination of silicon compounds from the anode wire of an aged proportional counter is presented. The aging of a counter with a 70%Ar + 30%CO{sub 2} and a 60%Ar + 30%CO{sub 2} + 10%СF{sub 4} working mixture was stimulated by a {sup 90}Sr β source. To accelerate the process of aging, the gas mixture flow to the counter was supplied through a pipe with RTV coated wall. As a result, the amplitude of the signal decreased 70% already at accumulated charge of Q = 0.03 C/cm. The etching of the silicon compounds on the wire surface with an 80%CF{sub 4} + 20%CO{sub 2} gas mixture discharge led to full recovery of the operating characteristics of detector and an increase in the lifetime. A scanning electron microscopy and X-ray spectroscopy analysis of the recovered wire surface were performed. In accordance with the results, a good quality of wire cleaning from SiO{sub 2} compounds was obtained.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simultaneous Ohmic Contact to Silicon Carbide

A simultaneous ohmic contact to silicon carbide includes a mixture of platinum, titanium, and silicon compounds deposited on a silicon carbide substrate. The silicon carbide substrate includes an n-type surface and a p-type surface.

Okojie, Robert S.↗

Development of a Model and Computer Code to Describe Solar Grade Silicon Production Processes

Mathematical models and computer codes based on these models, which allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon were developed. The following tasks were accomplished: (1) formulation of a model for silicon vapor separation/collection from the developing turbulent flow stream within reactors of the Westinghouse (2) modification of an available general parabolic code to achieve solutions to the governing partial differential equations (boundary layer type) which describe migration of the vapor to the reactor walls, (3) a parametric study using the boundary layer code to optimize the performance characteristics of the Westinghouse reactor, (4) calculations relating to the collection efficiency of the new AeroChem reactor, and (5) final testing of the modified LAPP code for use as a method of predicting Si(1) droplet sizes in these reactors.

Srivastava, R.↗

Development of a Model and Computer Code to Describe Solar Grade Silicon Production Processes

The program aims at developing mathematical models and computer codes based on these models, which allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon. The major interest is in collecting silicon as a liquid on the reactor walls and other collection surfaces. Two reactor systems are of major interest, a SiCl4/Na reactor in which Si(l) is collected on the flow tube reactor walls and a reactor in which Si(l) droplets formed by the SiCl4/Na reaction are collected by a jet impingement method. During this quarter the following tasks were accomplished: (1) particle deposition routines were added to the boundary layer code; and (2) Si droplet sizes in SiCl4/Na reactors at temperatures below the dew point of Si are being calculated.

Srivastava, R.↗

Turbulent flow model for vapor collection efficiency of a high-purity silicon reactor

In this study a mathematical model and a computer code based on this model was developed to allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon. Specifically, the model formulated describes the silicon vapor separation/collection from the developing turbulent flow stream within reactors of the Westinghouse type. Migration of the silicon vapor to the reactor walls was described by the parametric solutions presented here, in order to reduce the experimentation necessary in the design of such reactors. Calculations relating to the collection efficiencies of such reactors are presented as a function of the reactor throughflow and distance along its length.

Srivastava, R.↗

Soft chemical synthesis of silicon nanosheets and their applications

Two-dimensional silicon nanomaterials are expected to show different properties from those of bulk silicon materials by virtue of surface functionalization and quantum size effects. Since facile fabrication processes of large area silicon nanosheets (SiNSs) are required for practical applications, a development of soft chemical synthesis route without using conventional vacuum processes is a challenging issue. We have recently succeeded to prepare SiNSs with sub-nanometer thicknesses by exfoliating layered silicon compounds, and they are found to be composed of crystalline single-atom-thick silicon layers. In this review, we present the synthesis and modification methods of SiNSs. These SiNSs have atomically flat and smooth surfaces due to dense coverage of organic moieties, and they are easily self-assembled in a concentrated state to form a regularly stacked structure. We have also characterized the electron transport properties and the electronic structures of SiNSs. Finally, the potential applications of these SiNSs and organic modified SiNSs are also reviewed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a model and computer code to describe solar grade silicon production processes

Mathematical models, and computer codes based on these models were developed which allow prediction of the product distribution in chemical reactors in which gaseous silicon compounds are converted to condensed phase silicon. The reactors to be modeled are flow reactors in which silane or one of the halogenated silanes is thermally decomposed or reacted with an alkali metal, H2 or H atoms. Because the product of interest is particulate silicon, processes which must be modeled, in addition to mixing and reaction of gas-phase reactants, include the nucleation and growth of condensed Si via coagulation, condensation, and heterogeneous reaction.

Srivastava, R.↗