Search NASA⌕ Search

SEARCH · Search NASA

Results for “SMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Evaluation of the Microstructure and Property of TiNi SMA Prepared using VIM in BaZrO3 Crucible

The contamination from the crucible has been recognized as the main drawback of using vacuum induction melting (VIM) method to prepare TiNi shape memory alloys (SMAs). In the present work, we evaluated the feasibility of utilizing the highly-stable BaZrO3 crucible to prepare TiNi SMAs, whose microstructure and mechanical properties were investigated by High-energy X-ray Diffraction (HE-XRD), analytical Transmission Electron Microscopy (TEM), Differential Scanning Calorimetry (DSC) and tensile test. It was found that there were about 0.035 wt % oxygen and 0.039 wt % zirconium remained in the TiNi alloy after melting in BaZrO3 crucible, which fulfills the ASTM standard on biomedical TiNi alloys. Oxygen from the dissolution of BaZrO3 could form Ti4Ni2Ox phase, and zirconium exists as solute atoms in both of the matrix and second phase. After the thermomechanical processing and vacuum annealing at 850 degrees C, the alloy achieved 37.63% of fracture elongation and 880 MPa of tensile strength. The transformational strain and martensitic yield strain of the alloy reached about 8% and 21% respectively.

Gao, Pengyue↗

A helical actuator driven by biased SMA: design, model, and experiment

A helical actuator driven by biased shape memory alloy (SMA) patterns embedded into a soft composite ribbon base is presented in this work. Instead of common U-shape SMA wires, a single SMA wire is woven into planar patterns, which enable helical deformation of the composite ribbon from an initially flat geometry. An analytical static model is established for accurate and rapid prediction of the helical reconfiguration arising from the shape memory effect of woven SMA patterns, followed by validation of the static model using the finite element method (FEM). The finite element results are compared with the analytical solutions given by this static model, which show a high agreement. Parametric study of the influences of eight independent design variables on the dependent helical parameters, such as combined curvatures, pitches, and helical angles, is completed. It is found that the helically deformed geometry is mainly dominated by diameters, biased positions, inclined angles, and numbers of skewed segments of the SMA wire. Fabrication and in-situ experimental test of a prototype of such helical actuators qualitatively demonstrate its dramatic three-dimensional (3D) spiral reconfiguration from a two-dimensional (2D) flat ribbon. In conclusion, such SMA patterns will allow more diverse designs of soft actuators for a wider range of robotic applications.

36 MATERIALS SCIENCE↗

SMA OBSERVATIONS OF GOODS 850-11 AND GOODS 850-13: FIRST EXAMPLES OF MULTIPLE SUBMILLIMETER SOURCES RESOLVED BY AN INTERFEROMETER

We carried out extremely sensitive Submillimeter Array (SMA) 340 GHz continuum imaging on two submillimeter galaxies (SMGs): GOODS 850-11 and GOODS 850-13. The observations reach sub-mJy rms sensitivities and, interestingly, resolve both sources into multiple, physically unrelated SMGs. GOODS 850-11 is resolved into two sources at different redshifts. GOODS 850-13 is resolved into three sources, two with different spectroscopic redshifts and one only with a photometric redshift. All the SMA sources have fluxes in the 3-5 mJy range and all are detected at 1.4 GHz. Three of them are detected by Chandra, and one is a previously unknown X-ray SMG. This is the first time that single-dish SMGs are resolved into multiple unrelated sources and also the first time that the SMA has discovered new SMGs. Our results show that identifications of SMGs at any wavelengths other than the submillimeter itself can be misleading, since such identifications usually only pick up one of the real counterparts. Using simulations that mimic our SCUBA and SMA observations, we find that the number of triple systems detected in our SMA survey is much higher than that expected from the current best-determined number counts. We tentatively attribute this to clustering. We also predict that ALMA will find {approx}1/3 of >5 mJy 850 {mu}m SCUBA sources to be multiple systems. Based on our SMA observations and simulations, we suggest that large samples of existing SMGs should be imaged with sensitive interferometric observations, even if the SMGs were previously thought to be securely identified.

79 ASTRONOMY AND ASTROPHYSICS↗

Note: A component-level frequency tunable isolator for vibration-sensitive chips using SMA beams

This note presents a component-level frequency tunable isolator for vibration-sensitive chips. The isolator employed 8 U-shaped shape memory alloy (SMA) beams to support an isolation island (used for mounting chips). Due to the temperature-induced Young’s modulus variation of SMA, the system stiffness of the isolator can be controlled through heating the SMA beams. In such a way, the natural frequency of the isolator can be tuned. A prototype was fabricated to evaluate the concept. The test results show that the natural frequency of the isolator can be tuned in the range of 64 Hz–97 Hz by applying different heating strategies. Moreover, resonant vibration can be suppressed significantly (the transmissibility decreases about 65% near the resonant frequency) using a real-time tuning method.

36 MATERIALS SCIENCE↗

Mass assembly of stellar systems and their evolution with the SMA (MASSES). multiplicity and the physical environment in L1448N

We present continuum and molecular line observations at 230 and 345 GHz from the Submillimeter Array (SMA) toward three protostars in the Perseus L1448N region. The data are from the large project “Mass Assembly of Stellar Systems and their Evolution with the SMA.” Three dust continuum sources, Source B, Source NW, and Source A, are detected at both frequencies. These sources have corresponding emission peaks in C{sup 18}O (J=2→1), {sup 13}CO (J=2→1), and HCO{sup +} (J=4→3), and have offsets with N{sub 2}D{sup +} (J=3→2) peaks. High angular resolution data from a complementary continuum survey with the Karl G. Jansky Very Large Array show that Source B is associated with three 8 mm continuum objects, Source NW with two, and Source A remains single. These results suggest that multiplicity in L1448N exists at different spatial scales from a few thousand AU to <100 AU. Velocity gradients in each source obtained from two-dimensional fits to the SMA C{sup 18}O emission are found to be perpendicular to within 20° of the outflow directions as revealed by {sup 12}CO (J=2→1). We have observed that Sources B and NW with multiplicity have higher densities than Source A without multiplicity. This suggests that thermal Jeans fragmentation can be relevant in the fragmentation process. However, we have not observed a difference in the ratio between rotational and gravitational energy between sources with and without multiplicity. We also have not observed a trend between non-thermal velocity dispersions and the level of fragmentation. Our study has provided the first direct and comprehensive comparison between multiplicity and core properties in low-mass protostars, although based on small number statistics.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-F-J-10: Sliding Mode Control of a SMA Actuated Active Flexible Needle for Medical Procedures

Purpose: In medical interventional procedures such as brachytherapy, ablative therapies and biopsy precise steering and accurate placement of needles are very important for anatomical obstacle avoidance and accurate targeting. This study presents the efficacy of a sliding mode controller for Shape Memory Alloy (SMA) actuated flexible needle for medical procedures. Methods: Second order system dynamics of the SMA actuated active flexible needle was used for deriving the sliding mode control equations. Both proportional-integral-derivative (PID) and adaptive PID sliding mode control (APIDSMC) algorithms were developed and implemented. The flexible needle was attached at the end of a 6 DOF robotic system. Through LabView programming environment, the control commands were generated using the PID and APIDSMC algorithms. Experiments with artificial tissue mimicking phantom were performed to evaluate the performance of the controller. The actual needle tip position was obtained using an electromagnetic (EM) tracking sensor (Aurora, NDI, waterloo, Canada) at a sampling period of 1ms. During experiment, external disturbances were created applying force and thermal shock to investigate the robustness of the controllers. Results: The root mean square error (RMSE) values for APIDSMC and PID controllers were 0.75 mm and 0.92 mm, respectively, for sinusoidal reference input. In the presence of external disturbances, the APIDSMC controller showed much smoother and less overshooting response compared to that of the PID controller. Conclusion: Performance of the APIDSMC was superior to the PID controller. The APIDSMC was proved to be more effective controller in compensating the SMA uncertainties and external disturbances with clinically acceptable thresholds.

60 APPLIED LIFE SCIENCES↗

SMA observations on faint submillimeter galaxies with S {sub 850} < 2 mJy: Ultra dusty low-luminosity galaxies at high redshift

We obtained Submillimeter Array (SMA) observations of eight faint (intrinsic 850 μm fluxes < 2 mJy) submillimeter galaxies (SMGs) discovered in SCUBA images of the massive lensing cluster fields A370, A2390, and A1689 and detected five. In total, we obtain five SMA detections, all of which have de-lensed fluxes <1 mJy with estimated total infrared luminosities 10{sup 10}-10{sup 12} L {sub ☉}, comparable to luminous infrared galaxies and normal star-forming galaxies. Based on the latest number counts, these galaxies contribute ∼70% of the 850 μm extragalactic background light and represent the dominant star-forming galaxy population in the dusty universe. However, only 40{sub −16}{sup +30}% of our faint SMGs would be detected in deep optical or near-infrared surveys, which suggests many of these sources are at high redshifts (z ≳ 3) or extremely dusty, and they are not included in current star formation history estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

THE IMPORTANCE OF THE MAGNETIC FIELD FROM AN SMA-CSO-COMBINED SAMPLE OF STAR-FORMING REGIONS

Submillimeter dust polarization measurements of a sample of 50 star-forming regions, observed with the Submillimeter Array (SMA) and the Caltech Submillimeter Observatory (CSO) covering parsec-scale clouds to milliparsec-scale cores, are analyzed in order to quantify the magnetic field importance. The magnetic field misalignment δ—the local angle between magnetic field and dust emission gradient—is found to be a prime observable, revealing distinct distributions for sources where the magnetic field is preferentially aligned with or perpendicular to the source minor axis. Source-averaged misalignment angles (|δ|) fall into systematically different ranges, reflecting the different source-magnetic field configurations. Possible bimodal (|δ|) distributions are found for the separate SMA and CSO samples. Combining both samples broadens the distribution with a wide maximum peak at small (|δ|) values. Assuming the 50 sources to be representative, the prevailing source-magnetic field configuration is one that statistically prefers small magnetic field misalignments |δ|. When interpreting |δ| together with a magnetohydrodynamics force equation, as developed in the framework of the polarization-intensity gradient method, a sample-based log-linear scaling fits the magnetic field tension-to-gravity force ratio (Σ {sub B}) versus (|δ|) with (Σ {sub B}) = 0.116 · exp (0.047 · (|δ|)) ± 0.20 (mean error), providing a way to estimate the relative importance of the magnetic field, only based on measurable field misalignments |δ|. The force ratio Σ {sub B} discriminates systems that are collapsible on average ((Σ {sub B}) < 1) from other molecular clouds where the magnetic field still provides enough resistance against gravitational collapse ((Σ {sub B}) > 1). The sample-wide trend shows a transition around (|δ|) ≈ 45°. Defining an effective gravitational force ∼1 – (Σ {sub B}), the average magnetic-field-reduced star formation efficiency is at least a factor of two smaller than the free-fall efficiency. For about one fourth of the sources the average efficiency drops to zero. The force ratio Σ {sub B} can further be linked to the normalized mass-to-flux ratio, yielding an estimate for the latter one without the need of field strength measurements. Across the sample, a transition from magnetically supercritical to subcritcal is observed with growing misalignment (|δ|)

79 ASTRONOMY AND ASTROPHYSICS↗

SMA OBSERVATIONS OF THE W3(OH) COMPLEX: PHYSICAL AND CHEMICAL DIFFERENTIATION BETWEEN W3(H{sub 2}O) AND W3(OH)

We report on the Submillimeter Array (SMA) observations of molecular lines at 270 GHz toward the W3(OH) and W3(H{sub 2}O) complex. Although previous observations already resolved the W3(H{sub 2}O) into two or three sub-components, the physical and chemical properties of the two sources are not well constrained. Our SMA observations clearly resolved the W3(OH) and W3(H{sub 2}O) continuum cores. Taking advantage of the line fitting tool XCLASS, we identified and modeled a rich molecular spectrum in this complex, including multiple CH{sub 3}CN and CH{sub 3}OH transitions in both cores. HDO, C{sub 2}H{sub 5}CN, O{sup 13}CS, and vibrationally excited lines of HCN, CH{sub 3}CN, and CH{sub 3}OCHO were only detected in W3(H{sub 2}O). We calculate gas temperatures and column densities for both cores. The results show that W3(H{sub 2}O) has higher gas temperatures and larger column densities than W3(OH) as previously observed, suggesting physical and chemical differences between the two cores. We compare the molecular abundances in W3(H{sub 2}O) to those in the Sgr B2(N) hot core, the Orion KL hot core, and the Orion Compact Ridge, and discuss the chemical origin of specific species. An east–west velocity gradient is seen in W3(H{sub 2}O), and the extension is consistent with the bipolar outflow orientation traced by water masers and radio jets. A north–south velocity gradient across W3(OH) is also observed. However, with current observations we cannot be assured whether the velocity gradients are caused by rotation, outflow, or radial velocity differences of the sub-components of W3(OH)

79 ASTRONOMY AND ASTROPHYSICS↗

In-situ synchrotron diffraction study of the localized phase transformation and deformation behavior in NiTi SMA

The accumulation of dislocation defect was generally recognized as the origin of residual strain and the pseudoelastic instability in NiTi shape memory alloys (SMAs). In the present work, the pseudoelastic instability was studied by comparing the characteristics of Luders-type and uniform transformation mechanism via in-situ synchrotron-based high-energy X-ray diffraction (XRD) characterization. The experimental results showed that the Liiders-type mechanism could result in an intense and sharp increase of stress-induced martensite at the expense of austenite. The residual austenite with high lattice strain within the Luders band might be fully martensitic beyond the stress plateau of the E-a curve. With the accumulation of dislocation defect, the uniform martensitic transformation took place by the progressively homogeneous nucleation and growth of martensite in a local region. While the residual martensite and dislocation density was stabilized during mechanical cycling, the deformation of NiTi SMA turned into a mixture of (i) a balanced forward and reverse phase transformation between austenite and martensite, as well as (ii) the elastic deformation of the aggregate. As a result, there was no apparent increase in dislocation density detected during further cycling.

36 MATERIALS SCIENCE↗

GAS KINEMATICS AND THE DRAGGED MAGNETIC FIELD IN THE HIGH-MASS MOLECULAR OUTFLOW SOURCE G192.16-3.84: AN SMA VIEW

We report Submillimeter Array (SMA) observations of polarized 0.88 mm thermal dust emission and various molecular line transitions toward the early B-type (L{sub *} {approx} 2 Multiplication-Sign 10{sup 3} L{sub Sun }) star-forming region G192.16-3.84 (IRAS 05553+1631). The peak of the continuum Stokes-I emission coincides with a hot rotating disk/envelope (SO{sub 2} rotational temperature T{sub rot}{sup SO{sub 2}}{approx}84{sup +18}{sub -13} K), with a north-south velocity gradient. Joint analysis of the rotation curve traced by HCO{sup +} 4-3 and SO{sub 2} 19{sub 1,19}-18{sub 0,18} suggests that the dense molecular gas is undergoing a spinning-up rotation, marginally bound by the gravitational force of an enclosed mass M{sub *+gas+dust} {approx} 11.2-25.2 M{sub Sun }. Perpendicular to the rotational plane, a {approx}>100/cos (i) km s{sup -1} (i {approx} 63 Degree-Sign ) high velocity molecular jet and a {approx}15-20 km s{sup -1} expanding biconical cavity were revealed in the CO 3-2 emission. The polarization percentage of the 0.88 mm continuum emission decreases toward the central rotating disk/envelope. The polarization angle in the inner {approx}2'' (0.015 pc) disk/envelope is perpendicular to the plane of the rotation. The magnetic field lines, which are predominantly in the toroidal direction along the disk plane, are likely to be dragged by the gravitationally accelerated rotation.

79 ASTRONOMY AND ASTROPHYSICS↗

SMA Line Observations of the CH{sub 3}OH-maser Outflow in DR21(OH)

We present a (sub)millimeter line survey of the methanol maser outflow located in the massive star-forming region DR21(OH) carried out with the Submillimeter Array (SMA) at 217/227 GHz and 337/347 GHz. We find transitions from several molecules toward the maser outflow such as CH{sub 3}OH, H{sub 2}CS, C{sup 17}O, H{sup 13}CO{sup +}, and C{sup 34}S. However, with the present observations, we cannot discard the possibility that some of the observed species such as C{sup 17}O, C{sup 34}S, and H{sub 2}CS, might be instead associated with the compact and dusty continuum sources located in the MM2 region. Given that most of transitions correspond to methanol lines, we have computed a rotational diagram with CASSIS and an LTE synthetic spectra with XCLASS for the detected methanol lines in order to estimate the rotational temperature and column density in the small solid angle of the outflow where enough lines are present. We obtain a rotational temperature of 28 ± 2.5 K and a column density of 6.0 ± 0.9 × 10{sup 15} cm{sup −2}. These values are comparable to those column densities/rotational temperatures reported in outflows emanating from low-mass stars. Extreme and moderate physical conditions to excite the maser and thermal emission coexist within the CH{sub 3}OH flow. Finally, we do not detect any complex molecules associated with the flow, e.g., CH{sub 3}OCHO, (CH{sub 3}){sub 2}CO, and CH{sub 3}CH{sub 2}CN.

79 ASTRONOMY AND ASTROPHYSICS↗

SMA Observations of the Hot Molecular Core IRAS 18566+0408

We present Submillimeter Array (SMA) observations toward the high-mass star-forming region IRAS 18566+0408. Observations at the 1.3 mm continuum and in several molecular line transitions were performed in the compact (2.″4 angular resolution) and very-extended (∼0.″4 angular resolution) configurations. The continuum emission from the compact configuration shows a dust core of 150 M {sub ⊙}, while the very-extended configuration reveals a dense (2.6 × 10{sup 7} cm{sup −3}) and compact (∼4000 au) condensation of 8 M {sub ⊙}. We detect 31 molecular transitions from 14 species including CO isotopologues, SO, CH{sub 3}OH, OCS, and CH{sub 3}CN. Using the different k-ladders of the CH{sub 3}CN line, we derive a rotational temperature at the location of the continuum peak of 240 K. The {sup 12}CO(2−1), {sup 13}CO(2−1), and SO(6{sub 5}--5{sub 4}) lines reveal a molecular outflow at PA ∼ 135° centered at the continuum peak. The extended {sup 12}CO(2−1) emission has been recovered with the IRAM 30 m telescope observations. Using the combined data set, we derive an outflow mass of 16.8 M {sub ⊙}. The chemically rich spectrum and the high rotational temperature confirm that IRAS 18566+0408 is harboring a hot molecular core. We find no clear velocity gradient that could suggest the presence of a rotational disk-like structure, even at the high-resolution observations obtained with the very-extended configuration.

79 ASTRONOMY AND ASTROPHYSICS↗

High-resolution in-situ characterization of the surface evolution of a polycrystalline NiTi SMA-alloy under pseudoelastic deformation

The current study addresses the relation between grain orientations, local strain concentrations and resulting topographical changes in NiTi on the meso- and microscale by means of a comprehensive experimental in-situ approach, involving electron backscatter diffraction, confocal laser scanning microscopy and digital image correlation. The findings presented herein clearly show that this approach is capable of identifying the relationships between the microstructural features and phase transformation-induced topographical evolutions, which govern defect formation in thin protective coatings. - Research Highlights: {yields} High local strain gradients are observed between highly misoriented grains. {yields} Pronounced surface alterations emerged across these boundaries. {yields} Roughness evolution induced highly localized strains in the vicinity of grain boundaries. {yields} EBSD at {epsilon} = 5.5% proved the existence of intergranular constraints.

36 MATERIALS SCIENCE↗

Understanding the asymmetric orientations and stress states in polycrystalline NiTi SMA by in-situ synchrotron-based high-energy X-ray diffraction

The stress-induced martensite transformations (SIMTs) dramatically affect the recoverable strain and mechanical response of polycrystalline NiTi. An in-depth understanding of the propagation manner and orientation preference of SIMTs is therefore crucial. Here, in this work, we present a unique asymmetric anisotropy of SIMTs and lattice strains induced by Lüders-type deformation in polycrystalline NiTi, achieved through a combination of in-situ synchrotron X-ray diffraction and uniaxial tensile loading and unloading experiments. Our experimental findings reveal that in polycrystalline NiTi under uniaxial deformation, the asymmetry of SIMTs is attributed to the inhomogeneous strain field caused by the Lüders-type mechanism. The asymmetrical SIMT starts with the forward Lüder band and disappears along with the backward Lüder band. The austenite with the favored orientation of $\langle$110$\rangle$ A //loading direction (LD) transformed and recovered back at a higher rate compared to other orientations during both loading and unloading.

36 MATERIALS SCIENCE↗