Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shock tests.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Test report: Shock test of the electron/proton spectrometer structural test unit

A shock test of the electron-proton spectrometer structural test unit was conducted. The purpose of the shock test was to verify the structural integrity of the electron-spectrometer design and to obtain data on the shock response of the electronics and electronic housing. The test equipment is described and typical shock response data are provided.

Vincent, D. L.↗

An Alternative Method Of Specifying Shock Test Criteria

Shock testing of aerospace vehicle hardware has presented many challenges over the years due to the high magnitude and short duration of the specifications. Recently, component structural failures have occurred during testing that have not manifested themselves on over 200 Space Shuttle solid rocket booster (SRB) flights (two boosters per flight). It is suspected that the method of specifying shock test criteria may be leaving important information out of the test process. The traditional test criteria specification, the shock response spectrum, can be duplicated by any number of waveforms that may not resemble the actual flight test recorded time history. One method of overcoming this limitation is described herein, which may prove useful for qualifying hardware for the upcoming Constellation Program.

Ferebee, R. C.↗

Multi-Axis Resonant Plate Shock Testing Evaluation and Test Specification Development

Resonant plate testing is a shock test method that is frequently used to simulate pyroshock events in the laboratory. Recently, it was discovered that if the unit under test is installed at an off-center location, a tri-axial accelerometer would record a shock response in three directions and the resulting shock response spectra implied that the test may have qualified the component in three directions simultaneously. The purpose of this research project was to evaluate this idea of multi-axis shock testing to determine if it was truly a multi-axis shock environment and if such a test could be used as an equivalent component qualification test. A study was conducted using generic, additively manufactured components tested on a resonant plate, along with an investigation of plate motion to evaluate the component response to off- center plate excitation. The data obtained here along with the analytical simulations performed indicate that off-center resonant plate tests are actually not three-axis shock tests, but rather single axis shocks at an arbitrary angle dictated by the location of the unit under test on the plate. This conclusion is supported by the fact that only one vectored shock input is provided to the component in a resonant plate test. Thus, the output response is a coupled response of the transverse plate vibration and the rotational motion of the component on the plate. Additionally, a multi-axis shock test defined by three single axis test environments always results in a significant component over-test in one direction.

42 ENGINEERING↗

Pulse Shaping in 1D Elastic Waveguides for Shock Testing

Mechanical shock events experienced by electronics systems can be reproduced in the laboratory using Hopkinson bar tests. In these tests a projectile strikes an bar, creating a pulse which travels through the bar into the system. The quality of these tests depends on the closeness of the shape of the incident pulse to the shape specified for the test. This paper introduces a new way to control the shape of the incoming pulse, through the use of elastic metamaterial concepts. Two dispersion-modifying material concepts, phononic crystals, and local resonators, are examined for their wave shaping capabilities in 1D elastic waveguides. They are then evaluated using a transfer matrix method to determine the output wave shape in the time domain. The concepts are then optimized for various pulse shapes, showing that they are most effective when they are tuned to introduce dispersion near the fundamental frequency of the incident wave.

DeLima, Washington↗

Specification of pyro shock tests

Specifications of pyro shock tests are treated as the interconnection between raw measurements (or estimates) of the environment and the various test methods available. After a definition of the environment, various aspects of test method specification are discussed including one-sided pulses, test simulation parameters, and the effects of Q. Different test configurations are considered including rigid fixture tests, pseudo-real structure, and real structure.

Trummel, M.↗

Shock test assembly

An assembly for shock testing a specimen, the assembly including first and second opposing brackets and opposing lower and upper caps. The opposing brackets include lower and upper angled surfaces. The lower cap includes lower angled surfaces configured to engage the lower angled surfaces of the left and right brackets. The upper cap includes upper angled surfaces configured to engage the upper angled surfaces of the left and right brackets. The first and second brackets are configured to be drawn toward each other via fasteners, thereby wedging the lower and upper caps toward each other against the specimen.

Busenitz, Clark↗

Shock test assembly

An assembly for shock testing a specimen, the assembly including first and second opposing brackets and opposing lower and upper caps. The opposing brackets include lower and upper angled surfaces. The lower cap includes lower angled surfaces configured to engage the lower angled surfaces of the left and right brackets. The upper cap includes upper angled surfaces configured to engage the upper angled surfaces of the left and right brackets. The first and second brackets are configured to be drawn toward each other via fasteners, thereby wedging the lower and upper caps toward each other against the specimen.

Busenitz, Clark↗

Beyond Gravity Single Launch Payload Accommodations Shock Testing

The Vulcan Centaur launch vehicle is purpose-built to meet all the U.S. government’s National Security Space Launch (NSSL) needs. A shock test for the Centaur V’s payload accommodations (PLA), single launch (SL) configuration was successfully conducted at NASA’s Marshall Space Flight Center (MSFC) in Huntsville, Alabama, in May 2021. This test was a joint effort between MSFC, Beyond Gravity and United Launch Alliance. The primary purpose of the shock test was to characterize the shock environment induced by the separation event on components attached to the PLA and its interfaces. Additional test requirements included: (1) verifying the payload fairing (PLF) did not contact the flight hardware during the mechanical separation of the PLF horizontal separation system (HSS) and (2) evaluating the performance of the HSS spring packages during jettison. The data acquired during the PLF SL shock test will be used to validate the shock predictions from pre-test analysis of the launch vehicle and the PLF separation analysis. This paper provides an overview of the PLA SL shock test planning and execution as well as the required catch system, instrumentation and results.

separation↗

Beyond Gravity Single Launch Payload Accommodations Shock Testing

The Vulcan Centaur launch vehicle is purpose-built to meet all the U.S. government’s National Security Space Launch (NSSL) needs. A shock test for the Centaur V’s payload accommodations (PLA), single launch (SL) configuration was successfully conducted at NASA’s Marshall Space Flight Center (MSFC) in Huntsville, Alabama, in May 2021. This test was a joint effort between MSFC, Beyond Gravity and United Launch Alliance. The primary purpose of the shock test was to characterize the shock environment induced by the separation event on components attached to the PLA and its interfaces. Additional test requirements included: (1) verifying the payload fairing (PLF) did not contact the flight hardware during the mechanical separation of the PLF horizontal separation system (HSS) and (2) evaluating the performance of the HSS spring packages during jettison. The data acquired during the PLF SL shock test will be used to validate the shock predictions from pre-test analysis of the launch vehicle and the PLF separation analysis. This paper provides an overview of the PLA SL shock test planning and execution as well as the required catch system, instrumentation and results.

separation↗

Beyond Gravity Single Launch Payload Accommodations Shock Testing

The Vulcan Centaur launch vehicle is purpose-built to meet all the U.S. government’s National Security Space Launch (NSSL) needs. A shock test for the Centaur V’s payload accommodations (PLA), single launch (SL) configuration was successfully conducted at NASA’s Marshall Space Flight Center (MSFC) in Huntsville, Alabama, in May 2021. This test was a joint effort between MSFC, Beyond Gravity and United Launch Alliance. The primary purpose of the shock test was to characterize the shock environment induced by the separation event on components attached to the PLA and its interfaces. Additional test requirements included: (1) verifying the payload fairing (PLF) did not contact the flight hardware during the mechanical separation of the PLF horizontal separation system (HSS) and (2) evaluating the performance of the HSS spring packages during jettison. The data acquired during the PLF SL shock test will be used to validate the shock predictions from pre-test analysis of the launch vehicle and the PLF separation analysis. This paper provides an overview of the PLA SL shock test planning and execution as well as the required catch system, instrumentation and results.

separation↗

Water impact shock test system

The basic objective was to design, manufacture, and install a shock test system which, in part, would have the ability to subject test articles weighing up to 1,000 pounds to both half sine and/or full sine pulses having peak levels of up to 50 G's with half sine pulse durations of 100 milliseconds or full sine period duration of 200 milliseconds. The tolerances associated with the aforementioned pulses were +20% and -10% for the peak levels and plus or minus 10% for the pulse durations. The subject shock test system was to be capable of accepting test article sizes of up to 4 feet by 4 feet mounting surface by 4 feet in length.

Source record↗

Contact thermal shock test of ceramics

A novel quantitative thermal shock test of ceramics is described. The technique employs contact between a metal-cooling rod and hot disk-shaped specimen. In contrast with traditional techniques, the well-defined thermal boundary condition allows for accurate analyses of heat transfer, stress, and fracture. Uniform equibiaxial tensile stresses are induced in the center of the test specimen. Transient specimen temperature and acoustic emission are monitored continuously during the thermal stress cycle. The technique is demonstrated with soda-lime glass specimens. Experimental results are compared with theoretical predictions based on a finite-element method thermal stress analysis combined with a statistical model of fracture. Material strength parameters are determined using concentric ring flexure tests. Good agreement is found between experimental results and theoretical predictions of failure probability as a function of time and initial specimen temperature.

Rogers, W. P.↗

Conservatism implications of shock test tailoring for multiple design environments

A method for analyzing shock conservation in test specifications that have been tailored to qualify a structure for multiple design environments is discussed. Shock test conservation is qualified for shock response spectra, shock intensity spectra and ranked peak acceleration data in terms of an Index of Conservation (IOC) and an Overtest Factor (OTF). The multi-environment conservation analysis addresses the issue of both absolute and average conservation. The method is demonstrated in a case where four laboratory tests have been specified to qualify a component which must survive seven different field environments. Final judgment of the tailored test specification is shown to require an understanding of the predominant failure modes of the test item.

Baca, Thomas J.↗

Data Based Shock Test Specification

It is vital that avionic packages used for testing and certifying the reliability and safety of U.S. nuclear weapons with platform aircraft survive exposure to shock environments during transportation and delivery. The objective of this research was to characterize the response to these transportation shock environments delivering accurate shock test specifications in order to set laboratory programming material and device certification rigor. Responses to shock events were analyzed in the frequency domain via the Shock Response Spectrum (SRS). Shocks were then grouped based on respective behavior of maximum response accelerations which were pseudorandomly resampled and compared to test data to form test specifications based on the MinerPalmgren hypothesis. In addition to discovering significant over testing in current shock specifications, a new systematic, data-driven approach to designing shock specifications was formulated.

42 ENGINEERING↗