Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thermodynamics of MgO Atomic Layer Deposition Surface Reactions

The realities of atomic layer deposition (ALD) surface reactions often deviate from the simple ligand exchange frequently used to illustrate the technique. A detailed understanding of these reactions is necessary to develop greater surface synthetic control including chemical selectivity for patterning or to target defects. Here, the thermodynamics of surface reactions relevant to MgO ALD were investigated using pyroelectric calorimetry to measure the time-resolved heat generation. These reactions show exothermic heat generation of 0.12 mJ/cm 2 and 0.15 mJ/cm 2 for alternating Mg(CpEt) 2 and H 2 O reactions, respectively. The total reaction heat closely matches the standard reaction enthalpy for bulk MgO, supplemented with first-principles molecular calculations. First-principles models further reveal that while simple ligand exchange is favorable during surface reactions, the required increase in Mg-coordination number from two in the precursor to six in bulk MgO requires additional coverage-dependent surface reactions, which depend on the availability and stability of proximal surface hydroxyls.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tandem bulk oxygen diffusion and surface reactions in reducible metal oxides control redox cycle dynamics

The interplay between bulk oxygen diffusion and surface reactions in reducible metal oxides is key in heterogeneous catalysts, but direct measurements of oxygen mobility, transient kinetics, and in situ spectroscopies have been lacking. Here, we reveal complex dynamic behavior of ceria-zirconia by H 2 using transient kinetics via mass spectrometry and in situ Raman and near-ambient pressure x-ray photoelectron spectroscopies. Molecular dynamics simulations with a machine learning potential delineate competitive oxygen diffusion mechanisms, with an optimal mobility at intermediate reductions. We expose a compensation between vacancy availability and lattice distortion at intermediate to high reductions and Frenkel defects at low reductions, underscoring a potential deficiency of 16 O/ 18 O exchange experiments in deducing oxygen mobility. Vacancies in proximity require electron localization on Ce atoms further away. The continuous replenishment of surface oxygen results in a varying reduction rate, with H 2 dissociation being the rate-limiting step. Multiscale transient simulations, consistent with experiments, indicate catalysts of potentially spatially varying oxidation states. The approach is broadly applicable to reducible oxide materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

On-Surface Reactions of Electronically Active Self-Assembled Monolayers for Electrode Work Function Tuning

Self-assembled monolayers (SAMs) help improve the performance of organic electronic devices through interface passivation and enhanced carrier transport. Yet, there is limited information regarding the chemical structure of the SAMs upon functionalization and subsequent thermal treatment. Here, we studied the on-surface reaction of carbazole-derived SAMs on model gold electrodes, focusing on the chemical structure changes induced by thermal treatments. Furthermore, we correlate the microscopic changes with their impact on the electrode’s work function. The carbazole-based SAMs first transform into organometallic complexes. At higher annealing temperatures, SAMs convert to oligomeric complexes. The observed chemical reactions significantly reduce the electrode work function and facilitate electron injection in n-type organic thin-film transistors. Our results highlight the on-surface synthesis of electronically active SAMs as an alternative approach for modifying the work function of electrodes for organic electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Probing the Effects of Dimethyl Aluminum Isopropoxide Surface Reaction Byproducts on Atomic Layer Deposition Nucleation

Atomic layer deposition (ALD) processes that leverage a myriad of metal–organic and complementary reactant combinations have been identified to realize precise and conformal thin film growth. However, the effects of the ALD reaction byproducts on nucleation and growth mechanisms are rarely considered. Site-selective ALD processes provide an opportunity for the detailed investigation of uniform surface sites with atomistic accuracy. Intentional pretreatment with a known ALD reaction byproduct – isopropanol – enables a significant improvement in the nucleation rate reproducibility of dimethylaluminum isopropoxide and water ALD on rutile TiO 2 (110). In situ spectroscopic ellipsometry reveals a partially reversible byproduct binding that is site-selective for TiO 2 (110) surface oxygen vacancies. First-principles calculations reveal surface site-specific thermodynamics for adsorption of isopropanol and water that may influence ALD nucleation. In conclusion, the sensitivity of site-selective ALD motivates consideration of secondary surface reactions when designing precision deposition processes, including area- or site-selective ALD reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Resolving the Coverage Dependence of Surface Reaction Kinetics with Machine Learning and Automated Quantum Chemistry Workflows

Microkinetic models for catalytic systems require estimation of many thermodynamic and kinetic parameters that can be calculated for isolated species and transition states using ab initio methods. However, the presence of nearby coadsorbates on the surface can dramatically alter these thermodynamic and kinetic parameters causing them to be dependent on species coverage fractions. As there are combinatorially many coadsorbed configurations on the surface, computing the coverage dependence of these parameters is far less straightforward. We present a framework for generating and applying machine learning models to predict coverage-dependent parameters for microkinetic models. Our toolkit enables automatic calculation and evaluation of coadsorbed configurations allowing us to sample 2,000 coadsorbed adsorbates and transition states (TSs) for a diverse set of 9 reactions on Cu(111), a challenging surface, with four possible coadsorbates. This dataset was then used to train subgraph isomorphic decision trees (SIDTs) to predict the stability and association energy of configurations. We were able to achieve mean absolute errors (MAEs) of 0.106 eV on adsorbates, 0.172 eV on TSs, and due to natural error cancellation in SIDTs for relative properties, 0.130 eV on reaction energies and 0.180 eV on activation barriers. In conclusion, we describe how to use these models to predict coverage-dependent corrections for adsorbates and TSs and demonstrate on H*, HO*, and O* comparing the generated SIDT model with an iteratively refined version.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1964

Solar surface nuclear reactions

Nuclear reactions on solar surface - radiochemical studies of material recovered from discoverer xvii launched during solar flare

SOLAR FLARE↗
DOE OSTI2025

Cross-Scale Catalyst Modeling Applied to H 2 Storage and Release via Formic Acid

Here, we propose the Systems-to-Atoms (S2A) modeling framework that integrates the kinetics of reaction chemistry and structural configurations across various length scales with the aim of establishing a versatile template for multiscale modeling of reactive flow problems and to predict the operando activity of catalyst materials. The approach encompasses a microkinetic model to analyze surface reactions on individual facets of catalyst nanoparticles coupled with the computation of average surface reaction rates for catalyst nanoparticles of specific size distributions. Macro-homogeneous surface reaction kinetics are derived as a function of catalyst loading and used as input parameters for the continuum-scale reactor model. The cross-scale framework enables the optimization of catalyst utilization through reactor design and operating strategy. To demonstrate the framework, we studied the storage and release of hydrogen from formic acid, a promising liquid organic hydrogen carrier (LOHC), over Pd, Pt, and Cu catalysts. The framework predicts observed trends in formic acid dehydrogenation activity for catalysts with comparable weight loadings and metal particle diameters, demonstrating satisfactory quantitative alignment. Finally, the seamless transmission of parameter uncertainties between scales is also discussed.

08 HYDROGEN↗
DOE OSTI2026

Catalytic resonance theory for the kinetics of photon-promoted catalysis

The illumination of catalytic surfaces with a continuous or pulsed stream of photons dynamically modulates surface chemistry for faster rates, non-equilibrium conversion, or product selectivity control. To establish fundamental principles of dynamic photon-modulated catalysis, the photocatalytic conversion of a generic surface reaction was simulated using the kinetic Monte Carlo method to understand the kinetic implications of an independent stream of photons that promotes surface product desorption. The time-averaged photocatalytic rate at differential conditions for varying photon flux and temperatures indicated three kinetic regimes described by product thermal desorption control, surface reaction control, and an intermediate kinetic regime with a zero slope Arrhenius plot, consistent with a degree of rate control dominated by the photon arrival frequency (i.e., per-site photon flux). Here, the maximum photocatalytic rate occurred orders of magnitude above the Sabatier limit at the resonance frequency, identified as the photon arrival frequency matching the surface reaction rate constant.

Canavan, Jesse R. [University of Minnesota, Minnea↗
DOE OSTI2026

Electrolyte Organization Leads to Potential-Dependence in Thermochemical Catalysis of Nonpolar Reactions

Electrochemical polarization is now known to play a key role in thermochemical catalysis at solid–liquid interfaces. However, existing frameworks cannot account for why even nonpolar, nonfaradaic reactions are sensitive to interfacial polarization. In order to uncover the molecular basis of this phenomenon, we herein study the potential-dependent reaction kinetics of ethylene and trans-2-butene hydrogenation at Pt–liquid interfaces. Measurements were performed in aqueous and ortho-difluorobenzene (o-DFB) solutions, spontaneously polarizing the Pt–liquid interfaces by, respectively, varying the pH or dissolving distinct metallocene redox buffers into solution. Here, we find that at comparable mechanistic regimes, the rates of both ethylene and trans-2-butene hydrogenation are maximized near the same electrochemical potential, E. Moreover, the potential-dependence, defined as $\frac{∂ln 𝑟}{∂𝐸}$, of trans-2-butene hydrogenation is approximately 2.2× greater than that of ethylene hydrogenation across the full potential range studied. These observations are all consistent with a model in which polarization of the Pt surface away from the local potential of zero free charge (E PZFC ) induces electrostatic organization of the polar solvent and charged ions near the interface, which impedes olefin adsorption and surface reaction because these surface reactions induce electrolyte displacement. Accordingly, interfacial polarization alters the free energy landscape and thus the rate of nonpolar heterogeneous catalysis by controlling the degree of electrostatic organization of polar and charged spectators at the interface, which do not in general need to be specifically chemisorbed onto the surface but could simply be close enough to the surface to be perturbed by the olefin adsorption. These results point toward electrochemical design handles, namely, the electrolyte, catalyst potential, and local E PZFC of the catalyst, with which to tune interfacial catalysis of thermochemical organic transformations.

adsorption↗
DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗
DOE OSTI2025

Discovering CO Adsorption and Desorption Pathways from Chemical Reaction Neural Network Modeling of Transient Kinetics Spectroscopy

Here, we demonstrate a data-driven approach to interpreting surface reactions by combining time-resolved gas pulsing infrared spectroscopy with chemical reaction neural networks (CRNNs). Using CO adsorption and desorption on Pd(111) at 460–490 K as a model system, we show how transient kinetic data can reveal detailed reaction mechanisms. Starting with a simple one-species model, we systematically evaluate increasingly complex mechanisms involving hollow and bridge site adsorption. Despite the similar goodness of fit to the same experimental absorbance data, our models predict distinct coverage dynamics for different adsorption sites. Through analysis of spectral peak stability and predicted dynamics, we identify a mechanism in which CO primarily adsorbs on bridge sites followed by rapid conversion to hollow sites as being the most physically consistent with experimental observations. This work provides a framework for extracting mechanistic insights from limited experimental data, demonstrating how machine learning can bridge the gap between transient kinetic measurements and a molecular-level understanding of surface reactions.

36 MATERIALS SCIENCE↗