SEARCH · Search NASA

Results for “anisotropic etch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Effect of crystal orientation on anisotropic etching and MOCVD growth of grooves on GaAs

Grooves can be formed on GaAs by wet-chemical anisotropic etching of surfaces masked by photoresist stripes. The effect of crystal orientation on the shape of the grooves etched and on subsequent epitaxial growth by MOCVD is presented. The polar lattice increases the complexity of the etching and growth processes. The slow-etch planes defined by anisotropic etching are not always the same as the growth facets produced during MOCVD deposition, especially for deposition on higher order planes.

Bailey, Sheila G.↗

NASA NTRS1993

Method for anisotropic etching in the manufacture of semiconductor devices

Hydrocarbon polymer coatings used in microelectronic manufacturing processes are anisotropically etched by hyperthermal atomic oxygen beams (translational energies of 0.2 to 20 eV, preferably 1 to 10 eV). Etching with hyperthermal oxygen atom species obtains highly anisotropic etching with sharp boundaries between etched and mask protected areas.

Koontz, Steven L.↗

NASA NTRS1986

Anisotropic etching of Al by a directed Cl2 flux

A new Al etching technique is described that uses an ion beam from a Kaufman ion source and a directed Cl2 flux. The ion beam is used primarily to remove the native oxide and to allow the Cl2 to spontaneously react with the Al film forming volatile Al2Cl6. By controlling both the flux equivalent pressure of Cl2 and the ion beam current, this etching technique makes possible the anisotropic etching of Al with etch rates from 100 nm/min to nearly 10 microns/min with a high degree of selectivity.

Efremow, N. N.↗

NASA NTRS1994

The Materials Chemistry of Atomic Oxygen with Applications to Anisotropic Etching of Submicron Structures in Microelectronics and the Surface Chemistry Engineering of Porous Solids

Neutral atomic oxygen is the most abundant component of the ionospheric plasma in the low Earth orbit environment (LEO; 200 to 700 kilometers altitude) and can produce significant degradation of some spacecraft materials. In order to produce a more complete understanding of the materials chemistry of atomic oxygen, the chemistry and physics of O-atom interactions with materials were determined in three radically different environments: (1) The Space Shuttle cargo bay in low Earth orbit (the EOIM-3 space flight experiment), (2) a high-velocity neutral atom beam system (HVAB) at Los Alamos National Laboratory (LANL), and (3) a microwave-plasma flowing-discharge system at JSC. The Space Shuttle and the high velocity atom beam systems produce atom-surface collision energies ranging from 0.1 to 7 eV (hyperthermal atoms) under high-vacuum conditions, while the flowing discharge system produces a 0.065 eV surface collision energy at a total pressure of 2 Torr. Data obtained in the three different O-atom environments referred to above show that the rate of O-atom reaction with polymeric materials is strongly dependent on atom kinetic energy, obeying a reactive scattering law which suggests that atom kinetic energy is directly available for overcoming activation barriers in the reaction. General relationships between polymer reactivity with O atoms and polymer composition and molecular structure have been determined. In addition, vacuum ultraviolet photochemical effects have been shown to dominate the reaction of O atoms with fluorocarbon polymers. Finally, studies of the materials chemistry of O atoms have produced results which may be of interest to technologists outside the aerospace industry. Atomic oxygen 'spin-off' or 'dual use' technologies in the areas of anisotropic etching in microelectronic materials and device processing, as well as surface chemistry engineering of porous solid materials are described.

Koontz, Steve L.↗

NASA NTRS1981

Method of making V-MOS field effect transistors utilizing a two-step anisotropic etching and ion implantation

A method of making V-MOS field effect transistors is disclosed wherein a masking layer is first formed over a surface of a crystalline substrate. An aperture is then formed in the masking layer to expose the surface of the substrate. An anisotropic etchant is applied to the exposed surface so that a groove having a decreasing width within increasing depth is formed. However, the etch is not allowed to go to completion with the result that a partially formed V-shaped groove is formed. Ions are accelerated through the aperture for implantation in the crystalline substrate in the lower portion of the partially formed V-shaped groove. Thereafter, an anisotropic etchant is reapplied to the partially formed V-shaped groove, and the etch is allowed to go to completion.

Jhabvala, M. D.↗

NASA NTRS1986

Formation of a pn junction on an anisotropically etched GaAs surface using metalorganic chemical vapor deposition

A continuous p-type GaAs epilayer has been deposited on an n-type sawtooth GaAs surface using MOCVD. A wet chemical etching process was used to expose the intersecting (111)Ga and (-1 -1 1)Ga planes with 6-micron periodicity. Charge-collection microscopy was used to verify the presence of the pn junction thus formed and to measure its depth. The ultimate goal of this work is to fabricate a V-groove GaAs cell with improved absorptivity, high short-circuit current, and tolerance to particle radiation.

Leon, R. P.↗

NASA NTRS1993

Energetic Atoms Would Etch Photoresists Anisotropically

Directed beams of single oxygen atoms having kinetic energies between 1 and 5 eV used in anisotropic etching of oxygen-labile photoresist patterns on silicon wafers. Key step in manufacturing integrated circuits on semiconductor wafers. Damage to semiconductor material under photoresist layer reduced or eliminated. Method incorporated into lithographic processes for fabrication of integrated circuits.

Koontz, Steven↗

NASA NTRS2021

Anisotropic Wet Etching of Si as a Fabrication Tool Enabling 3-D Microphotonics Structures and Devices

It is shown that due to high speed and large volume of production, anisotropic wet etching of Si is a unique method of manufacturing high quality micropyramidal arrays for silicon photonics. Four types of arrays were fabricated: (i) square pyramids with the 54.7 slope of the sidewall surface, (ii) microcones with the 45 slope of sidewall surface, (iii) inverted square pyramids with 54.7 slope, and (iv) inverted triangular pyramids with different angles of the sidewalls. It is shown that the first type of arrays has a capability to produce tightly focused mid-wave infrared (MWIR) beams at the tips of the pyramids. Other arrays can be also used as light concentrators and various multifunctional microphotonic components.

Astratov, Vasily N.↗

NASA NTRS1995

Development of microchannel plate x-ray optics

Kaaret, Philip↗

NASA NTRS1989

Chemical etching and organometallic chemical vapor deposition on varied geometries of GaAs

Results of micron-spaced geometries produced by wet chemical etching and subsequent OMCVD growth on various GaAs surfaces are presented. The polar lattice increases the complexity of the process. The slow-etch planes defined by anisotropic etching are not always the same as the growth facets produced during MOCVD deposition, especially for deposition on higher-order planes produced by the hex groove etching.

Bailey, Sheila G.↗

NASA NTRS1983

Dry etching of metallization

The production dry etch processes are reviewed from the perspective of microelectronic fabrication applications. The major dry etch processes used in the fabrication of microelectronic devices can be divided into two categories - plasma processes in which samples are directly exposed to an electrical discharge, and ion beam processes in which samples are etched by a beam of ions extracted from a discharge. The plasma etch processes can be distinguished by the degree to which ion bombardment contributes to the etch process. This, in turn is related to capability for anisotropic etching. Reactive Ion Etching (RIE) and Ion Beam Etching are of most interest for etching of thin film metals. RIE is generally considered the best process for large volume, anisotropic aluminum etching.

Bollinger, D.↗

NASA NTRS1998

Profile Evolution Simulation in Etching Systems Using Level Set Methods

Semiconductor device profiles are determined by the characteristics of both etching and deposition processes. In particular, a highly anisotropic etch is required to achieve vertical sidewalls. However, etching is comprised of both anisotropic and isotropic components, due to ion and neutral fluxes, respectively. In Ar/Cl2 plasmas, for example, neutral chlorine reacts with the Si surfaces to form silicon chlorides. These compounds are then removed by the impinging ion fluxes. Hence the directionality of the ions (and thus the ion angular distribution function, or IAD), as well as the relative fluxes of neutrals and ions determines the amount of undercutting. One method of modeling device profile evolution is to simulate the moving solid-gas interface between the semiconductor and the plasma as a string of nodes. The velocity of each node is calculated and then the nodes are advanced accordingly. Although this technique appears to be relatively straightforward, extensive looping schemes are required at the profile corners. An alternate method is to use level set theory, which involves embedding the location of the interface in a field variable. The normal speed is calculated at each mesh point, and the field variable is updated. The profile comers are more accurately modeled as the need for looping algorithms is eliminated. The model we have developed is a 2-D Level Set Profile Evolution Simulation (LSPES). The LSPES calculates etch rates of a substrate in low pressure plasmas due to the incident ion and neutral fluxes. For a Si substrate in an Ar/C12 gas mixture, for example, the predictions of the LSPES are identical to those from a string evolution model for high neutral fluxes and two different ion angular distributions.(2) In the figure shown, the relative neutral to ion flux in the bulk plasma is 100 to 1. For a moderately isotropic ion angular distribution function as shown in the cases in the left hand column, both the LSPES (top row) and rude's string method (bottom row) predict tapered profiles. The LSPES uses an AD with a FWHM = 13.5 degrees, and rude's model uses a ratio of sheath voltage to ion temperature of 50. The more anisotropic IADs produce profiles with more vertical sidewalls and a wider bottom surface, as shown in the right hand column. Here, the LSPES has an AD with a FWHM = 2 degrees, and rude's model uses a ratio of 500 of sheath voltage to ion temperature. The agreement between the LSPES and rude's model is excellent in both cases. We will present etching profiles generated by the LSPES, including calculations of the re-emitted fluxes of both neutrals and ions off of the profile walls. In addition, we will show the effect of geometric structures (overhangs, etc.) on the etching profiles. Other physical aspects, such as surface diffusion, will also be included in the model.

Hwang, Helen H.↗

NASA NTRS1997

Etch Profile Simulation Using Level Set Methods

Etching and deposition of materials are critical steps in semiconductor processing for device manufacturing. Both etching and deposition may have isotropic and anisotropic components, due to directional sputtering and redeposition of materials, for example. Previous attempts at modeling profile evolution have used so-called "string theory" to simulate the moving solid-gas interface between the semiconductor and the plasma. One complication of this method is that extensive de-looping schemes are required at the profile corners. We will present a 2D profile evolution simulation using level set theory to model the surface. (1) By embedding the location of the interface in a field variable, the need for de-looping schemes is eliminated and profile corners are more accurately modeled. This level set profile evolution model will calculate both isotropic and anisotropic etch and deposition rates of a substrate in low pressure (10s mTorr) plasmas, considering the incident ion energy angular distribution functions and neutral fluxes. We will present etching profiles of Si substrates in Ar/Cl2 discharges for various incident ion energies and trench geometries.

Hwang, Helen H.↗

NASA NTRS1987

Deep, Precise Etching in Semiconductors

Semiconductors made to accept precise etching after pretreatment. Combination of material destabilization and anisotropic etching permits formation of precise perpendicular-wall cavities in silicon wafers and other semiconductors. New technique extends capabilities of current micromachining technology to fabrication of submillimeter waveguide arrays and filters. Pre-etching process currently used to fabricate thin-walled arrays of submillimeter waveguides for use as dichroic bandpass filters. Possible applications include integration of sensor probes and processing of circuitry on same silicon chip.

Shlichta, P. J.↗

NASA NTRS1994

Development of microchannel plate x-ray optics

The goal of this research program was to develop a novel technique for focusing x-rays based on the optical system of a lobster's eye. A lobster eye employs many closely packed reflecting surfaces arranged within a spherical or cylindrical shell. These optics have two unique properties: they have unlimited fields of view and can be manufactured via replication of identical structures. Because the angular resolution is given by the ratio of the size of the individual optical elements to the focal length, optical elements with sizes on the order of one hundred microns are required to achieve good angular resolution with a compact telescope. We employed anisotropic etching of single crystal silicon wafers for the fabrication of micron-scale optical elements. This technique, commonly referred to as silicon micromachining, is based on silicon fabrication techniques developed by the microelectronics industry. An anisotropic etchant is a chemical which etches certain silicon crystal planes much more rapidly than others. Using wafers in which the slowly etched crystal planes are aligned perpendicularly to the wafer surface, it is possible to etch a pattern completely through a wafer with very little distortion. Our optics consist of rectangular pores etched completely through group of zone axes (110) oriented silicon wafers. The larger surfaces of the pores (the mirror elements) were aligned with the group of zone axes (111) planes of the crystal perpendicular to the wafer surface. We have succeeded in producing silicon lenses with a geometry suitable for 1-d focusing x-ray optics. These lenses have an aspect ratio (40:1) suitable for x-ray reflection and have very good optical surface alignment. We have developed a number of process refinements which improved the quality of the lens geometry and the repeatability of the etch process. A significant progress was made in obtaining good optical surface quality. The RMS roughness was decreased from 110 A for our initial lenses to 30 A in the final lenses. A further factor of three improvement in surface quality is required for the production of efficient x-ray optics. In addition to the silicon fabrication, an x-ray beam line was constructed at Columbia for testing the optics.

Kaaret, Philip↗

NASA NTRS1999

Semiconductor etching by hyperthermal neutral beams

An at-least dual chamber apparatus and method in which high flux beams of fast moving neutral reactive species are created, collimated and used to etch semiconductor or metal materials from the surface of a workpiece. Beams including halogen atoms are preferably used to achieve anisotropic etching with good selectivity at satisfactory etch rates. Surface damage and undercutting are minimized.

Minton, Timothy K.↗

NASA NTRS1993

Investigation of etching techniques for superconductive Nb/Al-Al2O3/Nb fabrication processes

Wet etching, CF4 and SF6 reactive ion etching (RIE), RIE/wet hybrid etching, Cl-based RIE, ion milling, and liftoff techniques have been investigated for use in superconductive Nb/Al-Al2O3/Nb fabrication processes. High-quality superconductor-insulator-superconductor (SIS) junctions have been fabricated using a variety of these etching methods; however, each technique offers distinct tradeoffs for a given process an wafer design. In particular, it was shown that SF6 provides an excellent RIE chemistry for low-voltage anisotropic etching of Nb with high selectivity to Al. The SF6 tool has greatly improved the trilevel resist junction insulation process. Excellent repeatability, selectivity with respect to quartz, and submicron resolution make Cl2 + BCl3 + CHCl3 RIE a very attractive process for trilayer patterning.

Lichtenberger, A. W.↗

NASA NTRS2003

Process for Smoothing an Si Substrate after Etching of SiO2

A reactive-ion etching (RIE) process for smoothing a silicon substrate has been devised. The process is especially useful for smoothing those silicon areas that have been exposed by etching a pattern of holes in a layer of silicon dioxide that covers the substrate. Applications in which one could utilize smooth silicon surfaces like those produced by this process include fabrication of optical waveguides, epitaxial deposition of silicon on selected areas of silicon substrates, and preparation of silicon substrates for deposition of adherent metal layers. During etching away of a layer of SiO2 that covers an Si substrate, a polymer becomes deposited on the substrate, and the substrate surface becomes rough (roughness height approximately equal to 50 nm) as a result of over-etching or of deposition of the polymer. While it is possible to smooth a silicon substrate by wet chemical etching, the undesired consequences of wet chemical etching can include compromising the integrity of the SiO2 sidewalls and undercutting of the adjacent areas of the silicon dioxide that are meant to be left intact. The present RIE process results in anisotropic etching that removes the polymer and reduces height of roughness of the silicon substrate to less than 10 nm while leaving the SiO2 sidewalls intact and vertical. Control over substrate versus sidewall etching (in particular, preferential etching of the substrate) is achieved through selection of process parameters, including gas flow, power, and pressure. Such control is not uniformly and repeatably achievable in wet chemical etching. The recipe for the present RIE process is the following: Etch 1 - A mixture of CF4 and O2 gases flowing at rates of 25 to 75 and 75 to 125 standard cubic centimeters per minute (stdcm3/min), respectively; power between 44 and 55 W; and pressure between 45 and 55 mtorr (between 6.0 and 7.3 Pa). The etch rate lies between approximately equal to 3 and approximately equal to 6 nm/minute. Etch 2 - O2 gas flowing at 75 to 125 stdcm3/min, power between 44 and 55 W, and pressure between 50 and 100 mtorr (between 6.7 and 13.3 Pa).

Turner, Tasha↗