Suitability of aromatic polyurethanes for use in nuclear applications
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “aromatic polyurethane”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Diamine curing agents for polyurethanes
Three aromatic diamines have properties that make them promising candidates as curing agents for converting isocyanates to polyurethanes with higher adhesive strengths, higher softening temperatures, better toughness, and improved abrasion resistance.
Bell, V. L.↗
Exploratory study on the effects of novel diamine curing agents and isocyanate precursors on the properties of new epoxy and urethane adhesives
The effects of novel aromatic diamine structures on the adhesive properties of epoxy and polyurethane adhesives were studied. Aromatic diamines based on benzophenone and diphenyl-methane isomers were evaluated as curing agents for epoxy resins and benzophenone and diphenyl-methane based diamine isomers were evaluated as curing agents for polyurethane adhesives. Polyurethane adhesives were prepared based on m, m prime-diisocyanato-diphenyl-methane and m, m prime-diisocyanato-benzophenone. The m, m prime-diisocayanato-diphenyl-methane based adhesive had properties comparable to state-of-the-art adhesives. The m, m prime-diisocyanato-benzophenone based adhesive was extremely reactive.
Glasgow, D. G.↗
Effective Biomass Fractionation through Oxygen-Enhanced Alkaline-Oxidative Pretreatment
The high recalcitrance of plant cell walls is an obstacle for effective chemical or biological conversion into renewable chemicals and transportation fuels. Here, we investigated the utilization of both oxygen (O 2 ) and hydrogen peroxide (H 2 O 2 ) as co-oxidants during alkalineoxidative pretreatment to improve biomass fractionation and increase enzymatic digestibility. The oxidative pretreatment of hybrid poplar was studied over a variety of conditions. Employing O 2 in addition to H 2 O 2 as a co-oxidant during the two-stage alkaline pre-extraction/coppercatalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment process resulted in a substantial improvement in delignification relative to using H 2 O 2 alone during the second-stage Cu-AHP pretreatment, leading to high overall sugar yields even at H 2 O 2 loadings as low as 2% (w/w of original biomass). The presence of H 2 O 2 , however, was both critical and synergistic. Performing analogous reactions in the absence of H 2 O 2 resulted in approximately 25% less delignification and a 30% decrease in sugar yields. The lignin isolated from this dual oxidant second stage had high aliphatic hydroxyl group content and reactivity to isocyanate, indicating that it is a promising substrate for the production of polyurethanes. To test the suitability of the isolated lignin as a source of aromatic monomers, the lignin was subjected to a sequential Bobbitt’s salt oxidation followed by formic-acid catalyzed depolymerization process. Monomer yields of approximately 17% (w/w) were obtained, and the difference in yields was not significant between lignin isolated from our Cu-AHP process with and without O 2 as a co-oxidant. Thus, the addition of O 2 did not lead to significant lignin crosslinking, a result consistent with the twodimensional heteronuclear single-quantum coherence (2D HSQC) NMR spectra of the isolated lignin.
09 BIOMASS FUELS↗
Renewable and Biodegradable Polyurethane Foams with Aliphatic Diisocyanates
The transition to renewable plastics will require the development of substitutes with existing industrial standards and manufacturing processes. Polyurethanes (PU), versatile plastics, are traditionally dominated by aromatic diisocyanates, which are challenging to derive from renewable sources. However, for higher biocontent, it is crucial to utilize aliphatic diisocyanates, which can be sourced from renewable plant or algae waste streams. Historically, PU foams relied on aromatic diisocyanates for essential hard segments, resulting in desired physical properties. Here, we report the generation of high-performance renewable and biodegradable PU foams utilizing aliphatic diisocyanates and aromatic polyols, translating hard segments into the polyester polyol component using biosourced furan dicarboxylic acid (FDCA) monomers. We demonstrate that an FDCA-based PU is suitable for foams with performance characteristics that meet commercial tolerances and can biodegrade under backyard compost conditions. Here, this demonstrates steps toward redesigning traditional petrochemical-based polymers to accommodate new biological monomers.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
From Petroleum to Biobased Crude: A Thermoplastic Polyurethane from Lignin-Oil Without Isocyanates
The movement to transfer from petroleum-based products and materials to renewables does not necessarily have to bypass the use of oil. A new type of "black-gold" is readily abundant from the earth's most abundant source of aromatic carbon: lignin. While fractionation of petroleum yields fuels and chemicals for a diverse set of industries, lignin fractionation using targeted catalysts has demonstrated the ability to generate monomers and oligomers rich in functional groups for polymer synthesis. This study explores the use of lignin-oil, generated from reductive catalytic fractionation of popular wood, to a hydroxyl-rich mixture of aromatics that is used to synthesize a thermoplastic non-isocyanate polyurethane. The lignin-oil is first converted to a cyclocarbonated derivative using a benign synthetic sequence and further polymerized with a diamine to yield the non-isocyanate TPU. While more work is underway to optimize the reaction conditions and meet typical mechanical properties of commercial materials, initial analysis shows thermoplastic behavior and flexible properties consistent with traditional thermoplastic polyurethanes.
BIOMASS FUELS↗
Valorisation of technical lignin in rigid polyurethane foam: A critical evaluation on trends, guidelines and future perspectives
Lignin is one of the most abundant aromatic natural polymers. Produced as a by-product from the biomass refinery industries, lignin remains largely underutilised in high-value industrial applications. The incorporation of lignin in rigid polyurethane foam (RPUF) has been the focus of much research, due to its potential to replace fossil fuel-based components of RPUF. However, the overall sustainability of RPUF depends on numerous factors including processability, cost-effectiveness, and retention of performance throughout the service life. To date, the incorporation of lignin has been explored either as filler particles (through direct incorporation) or as a blendable liquid polyol introduced after chemical modifications (such as oxyalkylation, functionalisation, or depolymerisation). However, the production of lignin incorporated foam with high performance through cost-effective processing is still an ongoing challenge. Herein, this review critically appraises the progress on the effective incorporation of lignin in RPUF. Firstly, this review briefly covers the essential raw materials, formulation, important properties, and sustainability aspects of RPUF for industrial applications. Secondly, it provides insights on the key parameters of lignin of relevance to incorporation into RPUF. Thirdly, it benchmarks the reported studies on incorporation of lignin in RPUF systems by evaluating their important properties and proposes potential strategies for addressing the key challenges in the incorporation of lignin in RPUF. By bridging the gaps that exist in the literature on the utilisation of lignin in RPUF this account will serve as a resource for both beginners and professionals in the polyurethane and biorefinery industries towards the successful development of lignin incorporated RPUF for industrial applications
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effective Biomass Fractionation through Oxygen-Enhanced Alkaline–Oxidative Pretreatment
The high recalcitrance of plant cell walls is an obstacle for effective chemical or biological conversion into renewable chemicals and transportation fuels. Here, we investigated the utilization of both oxygen (O 2 ) and hydrogen peroxide (H 2 O 2 ) as co-oxidants during alkaline-oxidative pretreatment to improve biomass fractionation and increase enzymatic digestibility. The oxidative pretreatment of hybrid poplar was studied over a variety of conditions. Employing O 2 in addition to H 2 O 2 as a co-oxidant during the two-stage alkaline pre-extraction/copper-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment process resulted in a substantial improvement in delignification relative to using H 2 O 2 alone during the second-stage Cu-AHP pretreatment, leading to high overall sugar yields even at H 2 O 2 loadings as low as 2% (w/w of original biomass). The presence of H 2 O 2 , however, was both critical and synergistic. Performing analogous reactions in the absence of H 2 O 2 resulted in approximately 25% less delignification and a 30% decrease in sugar yields. Here, the lignin isolated from this dual oxidant second stage had high aliphatic hydroxyl group content and reactivity to isocyanate, indicating that it is a promising substrate for the production of polyurethanes. To test the suitability of the isolated lignin as a source of aromatic monomers, the lignin was subjected to a sequential Bobbitt’s salt oxidation followed by formic-acid catalyzed depolymerization process. Monomer yields of approximately 17% (w/w) were obtained, and the difference in yields was not significant between lignin isolated from our Cu-AHP process with and without O 2 as a co-oxidant. Thus, the addition of O 2 did not lead to significant lignin crosslinking, a result consistent with the two-dimensional heteronuclear single-quantum coherence (2D HSQC) NMR spectra of the isolated lignin.
09 BIOMASS FUELS↗
Preparation and characterization of aminated co-solvent enhanced lignocellulosic fractionation lignin as a renewable building block for the synthesis of non-isocyanate polyurethanes
Lignin is a major bioresource from 2nd generation biorefinery process streams and from pulp and paper production that is still severely underutilized nowadays. Its natural polymeric and aromatic structures make it suitable as a potential building block for biopolymer production. Due to the growing environmental and health concerns over conventional polyurethane (PU) manufacturing processes that utilize toxic isocyanates, there is a great interest to develop a non-isocyanate PU (NIPU) route. Herein, we demonstrate a novel strategy that uses highly pure lignin isolated from co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment of poplar wood to produce biobased NIPUs. In this strategy, hardwood poplar is firstly fractionated via a CELF pretreatment to produce a clean lignin stream that is rich in phenolics. The CELF lignin was then aminated by a Mannich reaction, and the aminated CELF lignin was finally reacted with bicyclic carbonates to yield an advanced NIPU. In this work, the structure, mechanical, and thermal properties of these novel NIPUs were elucidated by FTIR, NMR, tensile test, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). The mechanical properties of these lignin based NIPUs could be tuned from highly rigid to elastic polymers by simply modifying the lignin constituents of the polymer. The thermal stabilities of NIPUs were improved because of the addition of aminated lignin, and NIPU containing 55 and 23 wt% lignin showed the highest tensile strength (~1.2 MPa) and elongation at break (~140%), respectively. The results obtained in this study demonstrate that the reaction of cyclic carbonate with aminated lignin represents an interesting pathway for the synthesizing of lignin based NIPU with a relative high lignin content.
54 ENVIRONMENTAL SCIENCES↗
Development of a flameproof elastic elastomeric fiber
Various flexible polyurethane structures containing halogen were synthesized from polyesters derived from aliphatic or aromatic polyols and dibasic acids. Aliphatic halide structures could not be used because they are unstable at the required reaction temperatures, giving of hydrogen halide which hydrolyzes the ester linkages. In contract, halogen-containing aromatic polyols were stable and satisfactory products were made. The most promising composition, a brominated neopentyl glycol capped with toluene disocyanate, was used as a conventional diisocyanate, in conjunction with hydroxy-terminated polyethers or polyesters to form elastomeric urethanes containing about 10% bromine with weight. Products made in this manner will not burn in air, have an oxygen index value of about 25, and have tensile strength values of about 5,000 psi at 450% elongation. The most efficient additives for imparting flame retardancy to Spandex urethanes are aromatic halides and the most effective of these are the bromide compounds. Various levels of flame retardancy have been achieved depending on the levels of additives used.
Howarth, J. T.↗
Balloon for Long-Duration, High-Altitude Flight at Venus
A document describes a 5.5-m-diameter, helium-filled balloon designed for carrying a scientific payload having a mass of 44 kg for at least six days at an altitude of about 55 km in the atmosphere of Venus. The requirement for floating at nearly constant altitude dictates the choice of a mass-efficient spherical super-pressure balloon that tracks a constant atmospheric density. Therefore, the balloon is of a conventional spherical super-pressure type, except that it is made of materials chosen to minimize solar radiant heating and withstand the corrosive sulfuric acid aerosol of the Venusian atmosphere. The shell consists of 16 gores of a multilayer composite material. The outer layer, made of polytetrafluoroethylene, protects against sulfuric acid aerosol. Next is an aluminum layer that reflects sunlight to minimize heating, followed by an aluminized polyethylene terephthalate layer that resists permeation by helium, followed by an aromatic polyester fabric that imparts strength to withstand deployment forces and steady super-pressure. A polyurethane coat on the inner surface of the fabric facilitates sealing at gore-to-gore seams. End fittings and seals, and a tether connecting the end fittings to a gondola, are all made of sulfuric-acid-resistant materials.
Hall, Jeffrey↗
Challenges and Perspectives in Lignin‐Derived Polyurethane Foam Synthesis
Abstract Polyurethane foams (PUFs) represent a significant segment of the polyurethane (PU) and cellular plastics industries, owing to their versatile applications and desirable properties. However, the production of PUFs heavily relies on petroleum‐derived chemicals, including polyols and isocyanates, raising critical environmental concerns. Lignin, an abundant aromatic macromolecule, offers a promising alternative for replacing petroleum‐based polyols because of its intrinsic hydroxyl groups. While efforts have been made to produce and apply various lignin‐based polyurethane foams (LPUFs), their commercialization remains limited by challenges such as low product consistency, poor technical performances, and high production costs. This study critically evaluates recent advances in the development of LPUFs, including innovative synthesis methods, functional applications, and emerging research trends. Moreover, potential strategies are discussed, such as lignin fractionation, modification, and co‐solvent assistance, for addressing the challenges. By resolving them, LPUFs could play a pivotal role in transitioning the PU industry to help achieve a circular bioeconomy.
Zhang, Mairui [Carl and Melinda Helwig Department ↗
Lignin-derivable, thermoplastic, non-isocyanate polyurethanes with increased hydrogen-bonding content and toughness vs. petroleum-derived analogues
This work highlights lignin-derivable, thermoplastic, non-isocyanate polyurethanes as potential alternatives to petroleum-derived analogues with increased toughness and processability due to the functionality of lignin-aromatics (methoxy groups).
Mahajan, Jignesh S.↗
Relative toxicity of pyrolysis products of some aircraft seat materials
Eighteen samples of aircraft seat materials were evaluated for relative toxicity using the USF/NASA toxicity screening test method. Nine samples were upholstery fabrics and nine samples were cushioning foams. Under these particular conditions of test, the aromatic phenolic and aromatic polyamide fabrics exhibited less toxicity than the samples of wool and wool/nylon fabrics, and the samples of neoprene foams exhibited less toxicity than the samples of polyurethane foams. These relative toxicity rankings were obtained using both apparent lethal concentration for 50 percent of the test animals (ALC50), and time to death (Td) at a fixed weight of material.
Hilado, C. J.↗
Process produces chlorinated aromatic isocyanate in high yield
Tetrachloreterephthaloyl chloride reacts with sodium azide in an atmosphere of nitrogen to form a high yield of tetrachloro-p-phenylene diisocyanate. The chlorinated diisocyanate should have application as an intermediate in the preparation of polyurethane foams. The high halogen content would impart added flame resistance to these foams.
Trischler, F.↗
Relative toxicity of materials in fire situations
The results of toxicity testing of additional materials is presented. Relative toxicity data on polymers by generic type are presented and include wood, polyurethane flexible foam, polyvinyl chloride (PVC), acrylonitrile/butadiene/styrene (ABS), and polyisoprene (natural rubber). A second table gives relative toxicity data on fibers and fabrics including wool, nylon, rayon, polyester, and aromatic polyamide. Sulfur-containing materials seemed to exhibit the shortest times to death of laboratory animals. Some chlorine-containing polymers tended to exhibit shortest time to death also while some halogen-containing polymers gave the shortest time to incapacitation. Among fibers and fabrics, wool, silk, and polyester exhibited the shortest times to incapacitation and times to death. Difficulty in restricting generally accepted materials is discussed and attention is given to other factors important in comparing materials, such as backcoatings and relative weights.
Hilado, C. J.↗
Versatile microbial communities rapidly assimilate ammonium hydroxide-treated plastic waste
Abstract Waste plastic presently accumulates in landfills or the environment. While natural microbial metabolisms can degrade plastic polymers, biodegradation of plastic is very slow. This study demonstrates that chemical deconstruction of polyethylene terephthalate (PET) with ammonium hydroxide can replace the rate limiting step (depolymerization) and by producing plastic-derived terephthalic acid and terephthalic acid monoamide. The deconstructed PET (DCPET) is neutralized with phosphoric acid prior to bioprocessing, resulting in a product containing biologically accessible nitrogen and phosphorus from the process reactants. Three microbial consortia obtained from compost and sediment degraded DCPET in ultrapure water and scavenged river water without addition of nutrients. No statistically significant difference was observed in growth rate compared to communities grown on DCPET in minimal culture medium. The consortia were dominated by Rhodococcus spp., Hydrogenophaga spp., and many lower abundance genera. All taxa were related to species known to degrade aromatic compounds. Microbial consortia are known to confer flexibility in processing diverse substrates. To highlight this, we also demonstrate that two microbial consortia can grow on similarly deconstructed polyesters, polyamides, and polyurethanes in water instead of medium. Our findings suggest that microbial communities may enable flexible bioprocessing of mixed plastic wastes when coupled with chemical deconstruction.
59 BASIC BIOLOGICAL SCIENCES↗
Sprayable low density ablator and application process
A sprayable, low density ablative composition is described consisting esentially of: (1) 100 parts by weight of a mixture of 25-65% by weight of phenolic microballoons, 0-20% by weight of glass microballoons, 4-10% by weight of glass fibers, 25-45% by weight of an epoxy-modified polyurethane resin, 2-4% by weight of a bentonite dispersing aid, and 1-2% by weight of an alcohol activator for the bentonite; (2) 1-10 parts by weight of an aromatic amine curing agent; and (3) 200-400 parts by weight of a solvent.
Sharpe, M. H.↗