SEARCH · Search NASA

Results for “fault tolerant processor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Rapid recovery from transient faults in the fault-tolerant processor with fault-tolerant shared memory

The Draper fault-tolerant processor with fault-tolerant shared memory (FTP/FTSM), which is designed to allow application tasks to continue execution during the memory alignment process, is described. Processor performance is not affected by memory alignment. In addition, the FTP/FTSM incorporates a hardware scrubber device to perform the memory alignment quickly during unused memory access cycles. The FTP/FTSM architecture is described, followed by an estimate of the time required for channel reintegration.

Harper, Richard E.↗

NASA NTRS1991

A Markov model reduction technique for fault tolerant processor reliability analysis

A fault tolerant processor (FTP) plays a key role in many high performance, safety-critical control system applications. Realistic modeling of an FTP is crucial to gaining a high degree of confidence in the reliability and safety analysis of such a system. While fidelity is clearly a major consideration, a practical model must also be kept to a moderate size to allow its incorporation into the overall system model. This paper presents a systematic reduction technique that starts from a complex, detailed model of a triple, redundant FTP and produces a low order approximation of very high accuracy. The existence of two distinct time scales represents the key to the success of the technique. No eigenvalue solution or coordinate transformation are needed. The reduced model captures all the important features of the detailed model, is amenable to an analytical solution and provides insight into the reconfiguration behavior of an FTP.

Schor, Andrei L.↗

NASA NTRS1986

An Ada implementation for fault detection, isolation and reconfiguration using a fault-tolerant processor

The design and implementation, in Ada, of the Fault Detection, Isolation, and Reconfiguration (FDIR) Manager for the triply redundant, tightly synchronized, Fault Tolerant Processor (FTP) are covered. It also examines the suitability of Ada, in the context of the FTP, for real time control tasks. The operational concepts behind the FTP are explained, and the structure of the resultant Ada code is discussed.

Greeley, Gregory L.↗

NASA NTRS1987

Documentation of the current fault detection, isolation and reconfiguration software of the AIPS fault-tolerant processor

Documentation is presented of the December 1986 version of the ADA code for the fault detection, isolation, and reconfiguration (FDIR) functions of the Advanced Information processing System (AIPS) Fault-Tolerant Processor (FTP). Because the FTP is still under development and the software is constantly undergoing changes, this should not be considered final documentation of the FDIR software of the FTP.

Lanning, David T.↗

NASA NTRS1990

Study on fault-tolerant processors for advanced launch system

Issues related to the reliability of a redundant system with large main memory are addressed. The Fault-Tolerant Processor (FTP) for the Advanced Launch System (ALS) is used as a basis for the presentation. When the system is free of latent faults, the probability of system crash due to multiple channel faults is shown to be insignificant even when voting on the outputs of computing channels is infrequent. Using channel error maskers (CEMs) is shown to improve reliability more effectively than increasing redundancy or the number of channels for applications with long mission times. Even without using a voter, most memory errors can be immediately corrected by those CEMs implemented with conventional coding techniques. In addition to their ability to enhance system reliability, CEMs (with a very low hardware overhead) can be used to dramatically reduce not only the need of memory realignment, but also the time required to realign channel memories in case, albeit rare, such a need arises. Using CEMs, two different schemes were developed to solve the memory realignment problem. In both schemes, most errors are corrected by CEMs, and the remaining errors are masked by a voter.

Shin, Kang G.↗

NASA NTRS1993

Analysis of a hardware and software fault tolerant processor for critical applications

Computer systems for critical applications must be designed to tolerate software faults as well as hardware faults. A unified approach to tolerating hardware and software faults is characterized by classifying faults in terms of duration (transient or permanent) rather than source (hardware or software). Errors arising from transient faults can be handled through masking or voting, but errors arising from permanent faults require system reconfiguration to bypass the failed component. Most errors which are caused by software faults can be considered transient, in that they are input-dependent. Software faults are triggered by a particular set of inputs. Quantitative dependability analysis of systems which exhibit a unified approach to fault tolerance can be performed by a hierarchical combination of fault tree and Markov models. A methodology for analyzing hardware and software fault tolerant systems is applied to the analysis of a hypothetical system, loosely based on the Fault Tolerant Parallel Processor. The models consider both transient and permanent faults, hardware and software faults, independent and related software faults, automatic recovery, and reconfiguration.

Dugan, Joanne B.↗

NASA NTRS1990

A Byzantine resilient processor with an encoded fault-tolerant shared memory

The memory requirements for ultra-reliable computers are expected to increase due to future increases in mission functionality and operating-system requirements. This increase will have a negative effect on the reliability and cost of the system. Increased memory size will also reduce the ability to reintegrate a channel after a transient fault, since the time required to reintegrate a channel in a conventional fault-tolerant processor is dominated by memory realignment time. A Byzantine Resilient Fault-Tolerant Processor with Fault-Tolerant Shared Memory (FTP/FTSM) is presented as a solution to these problems. The FTSM uses an encoded memory system, which reduces the memory requirement by one-half compared to a conventional quad-FTP design. This increases the reliability and decreases the cost of the system. The realignment problem is also addressed by the FTSM. Because any single error is corrected upon a read from the FTSM, a faulty channel's corrupted memory does not need realignment before reintegration of the faulty channel. A combination of correct-on-access and background scrubbing is proposed to prevent the accumulation of transient errors in the memory. With a hardware-implemented scrubber, the scrubbing cycle time, and therefore the memory fault latency, can be upper-bounded at a small value. This technique increases the reliability of the memory system and facilitates validation of its reliability model.

Butler, Bryan↗

NASA NTRS1990

Fault-tolerant parallel processors for avionics with reduced maintenance

Architectural issues and approaches for implementing fault-tolerant parallel processors in avionics systems and other dedicated applications requiring high levels of dependability are discussed. For these systems it is desirable to provide both a high degree of fault tolerance and a system that can operate for extended periods of time without external maintenance. With current technology it is possible to operate dependably for months between maintenance events. The longer-term goal should be maintenance-free operation (a computer that outlasts its host system). It is argued that new high-density packaging techniques may make this type of long-life fault-tolerant design an attractive choice in controlling the life-cycle costs of the next generation of systems.

Rennels, David A.↗

NASA NTRS2005

On-board fault-tolerant SAR processor for spaceborne imaging radar systems

A real-time high-performance and fault-tolerant FPGA-based hardware architecture for the processing of synthetic aperture radar (SAR) images has been developed for advanced spaceborne radar imaging systems. In this paper, we present the integrated design approach, from top-level algorithm specifications, system architectures, design methodology, functional verification, performance validation, down to hardware design and implementation.

imaging Radar↗

NASA NTRS1990

Fault recovery characteristics of the fault tolerant multi-processor

The fault handling performance of the fault tolerant multiprocessor (FTMP) was investigated. Fault handling errors detected during fault injection experiments were characterized. In these fault injection experiments, the FTMP disabled a working unit instead of the faulted unit once every 500 faults, on the average. System design weaknesses allow active faults to exercise a part of the fault management software that handles byzantine or lying faults. It is pointed out that these weak areas in the FTMP's design increase the probability that, for any hardware fault, a good LRU (line replaceable unit) is mistakenly disabled by the fault management software. It is concluded that fault injection can help detect and analyze the behavior of a system in the ultra-reliable regime. Although fault injection testing cannot be exhaustive, it has been demonstrated that it provides a unique capability to unmask problems and to characterize the behavior of a fault-tolerant system.

Padilla, Peter A.↗

NASA NTRS1992

Parallel fault-tolerant robot control

A shared memory multiprocessor architecture is used to develop a parallel fault-tolerant robot controller. Several versions of the robot controller are developed and compared. A robot simulation is also developed for control observation. Comparison of a serial version of the controller and a parallel version without fault tolerance showed the speedup possible with the coarse-grained parallelism currently employed. The performance degradation due to the addition of processor fault tolerance was demonstrated by comparison of these controllers with their fault-tolerant versions. Comparison of the more fault-tolerant controller with the lower-level fault-tolerant controller showed how varying the amount of redundant data affects performance. The results demonstrate the trade-off between speed performance and processor fault tolerance.

Hamilton, D. L.↗

NASA NTRS1989

Study of a unified hardware and software fault-tolerant architecture

A unified architectural concept, called the Fault Tolerant Processor Attached Processor (FTP-AP), that can tolerate hardware as well as software faults is proposed for applications requiring ultrareliable computation capability. An emulation of the FTP-AP architecture, consisting of a breadboard Motorola 68010-based quadruply redundant Fault Tolerant Processor, four VAX 750s as attached processors, and four versions of a transport aircraft yaw damper control law, is used as a testbed in the AIRLAB to examine a number of critical issues. Solutions of several basic problems associated with N-Version software are proposed and implemented on the testbed. This includes a confidence voter to resolve coincident errors in N-Version software. A reliability model of N-Version software that is based upon the recent understanding of software failure mechanisms is also developed. The basic FTP-AP architectural concept appears suitable for hosting N-Version application software while at the same time tolerating hardware failures. Architectural enhancements for greater efficiency, software reliability modeling, and N-Version issues that merit further research are identified.

Lala, Jaynarayan↗

NASA NTRS1994

Advanced information processing system: Hosting of advanced guidance, navigation and control algorithms on AIPS using ASTER

This program demonstrated the integration of a number of technologies that can increase the availability and reliability of launch vehicles while lowering costs. Availability is increased with an advanced guidance algorithm that adapts trajectories in real-time. Reliability is increased with fault-tolerant computers and communication protocols. Costs are reduced by automatically generating code and documentation. This program was realized through the cooperative efforts of academia, industry, and government. The NASA-LaRC coordinated the effort, while Draper performed the integration. Georgia Institute of Technology supplied a weak Hamiltonian finite element method for optimal control problems. Martin Marietta used MATLAB to apply this method to a launch vehicle (FENOC). Draper supplied the fault-tolerant computing and software automation technology. The fault-tolerant technology includes sequential and parallel fault-tolerant processors (FTP & FTPP) and authentication protocols (AP) for communication. Fault-tolerant technology was incrementally incorporated. Development culminated with a heterogeneous network of workstations and fault-tolerant computers using AP. Draper's software automation system, ASTER, was used to specify a static guidance system based on FENOC, navigation, flight control (GN&C), models, and the interface to a user interface for mission control. ASTER generated Ada code for GN&C and C code for models. An algebraic transform engine (ATE) was developed to automatically translate MATLAB scripts into ASTER.

Brenner, Richard↗

NASA NTRS1989

Evaluation of fault-tolerant parallel-processor architectures over long space missions

The impact of a five year space mission environment on fault-tolerant parallel processor architectures is examined. The target application is a Strategic Defense Initiative (SDI) satellite requiring 256 parallel processors to provide the computation throughput. The reliability requirements are that the system still be operational after five years with .99 probability and that the probability of system failure during one-half hour of full operation be less than 10(-7). The fault tolerance features an architecture must possess to meet these reliability requirements are presented, many potential architectures are briefly evaluated, and one candidate architecture, the Charles Stark Draper Laboratory's Fault-Tolerant Parallel Processor (FTPP) is evaluated in detail. A methodology for designing a preliminary system configuration to meet the reliability and performance requirements of the mission is then presented and demonstrated by designing an FTPP configuration.

Johnson, Sally C.↗

NASA NTRS1988

A simulation-based fault injection experiment to evaluate self-test diagnostics for a fault-tolerant computer

The design and results of a fault injection experiment conducted in the Airlab facility at NASA-Langley using a logic network simulator are described. An attempt was made to determine the effectiveness of the diagnostic self-test sequences used to detect failures in the communicator/interstage (C/I) of a fault-tolerant processor (FTP). Identification of the undetected faults in the C/I Status Register logic resulted in changes in the diagnostic test sequences implemented for the FTP.

Baker, Robert L.↗

NASA NTRS1992

Study on advanced information processing system

Issues related to the reliability of a redundant system with large main memory are addressed. In particular, the Fault-Tolerant Processor (FTP) for Advanced Launch System (ALS) is used as a basis for our presentation. When the system is free of latent faults, the probability of system crash due to nearly-coincident channel faults is shown to be insignificant even when the outputs of computing channels are infrequently voted on. In particular, using channel error maskers (CEMs) is shown to improve reliability more effectively than increasing the number of channels for applications with long mission times. Even without using a voter, most memory errors can be immediately corrected by CEMs implemented with conventional coding techniques. In addition to their ability to enhance system reliability, CEMs--with a low hardware overhead--can be used to reduce not only the need of memory realignment, but also the time required to realign channel memories in case, albeit rare, such a need arises. Using CEMs, we have developed two schemes, called Scheme 1 and Scheme 2, to solve the memory realignment problem. In both schemes, most errors are corrected by CEMs, and the remaining errors are masked by a voter.

Shin, Kang G.↗

NASA NTRS1989

A performance assessment of a byzantine resilient fault-tolerant computer

This report presents the results of a performance analysis of a quad-redundant Fault-Tolerant Processor (FTP). The FTP is a computing system specifically designed for applications where very high reliability is required. Examples of such applications are flight control systems, nuclear power systems, and spacecraft control systems. The FTP performance was analyzed in a hierarchical manner encompassing the hardware, the operating system, and the application. At the hardware level, the hardware organization and design was assessed in relation to system throughput and response. Analysis at the operating system level revealed that the scheduler took only 3.2 percent of each 40ms frame, while the redundancy management software took 10.4 percent. The application level performance was analyzed via a synthetic workload and a representative flight control model. The estimated throughput for this application was found to be 317.6 KIPS if not exercising the voter. Exercising the voter to ensure fault tolerance will diminish this number linearly as the number of votes is increased. This performance analysis method was proven effective by uncovering undesirable behavior and anomalies in the FTP system.

Young, Steven D.↗

NASA NTRS1987

A research program in advanced information systems

Topics addressed cover: identification of large space structure dynamics; special-purpose architectures for computational fluid dynamics; fault-tolerant processor architectures; data flow techniques; software specification and verification tools; management of software development; software environment for concurrent computing; and parallel algorithms and architectures for the solution of partial differential equations.

Vandervelde, Wallace E.↗