Field validation results and future plans for operational Arctic sea ice mapping with satellite radars
Explore the source record for details and available documents.
sea ice scatterometer QuikSCAT SeaWinds SAR ENVISA↗
SEARCH · Search NASA
Results for “field validation results”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Validation of GOES-17 ABI Reflective Channels Performance: Salar De Uyuni 2018 Field Campaign Results
Validation results from a reflectance-based field campaign at the Salar de Uyuni in Bolivia (September 2018) are presented for GOES-17 and GOES-16 Advanced Baseline Imagers (ABI) reflective channels. The in situ measurements were used to characterize the surface reflectance and the atmosphere in order to constrain a radiative transfer model and predict the reflectance at the top of the atmosphere (TOA), which was then compared to the ABI measurements. The field campaign provides TOA reflectance estimates over several days, allowing assessment of the calibration accuracy and stability of channels 1, 2, 3, 5 and 6 for GOES-17 andGOES-16 ABI. Channel 1 of GOES-17 ABI shows -5.5% bias in comparison to the ground-based predicted TOA. Over 6% bias in GOES-17 B2 was confirmed. A comparison to NOAA-20 VIIRS was also carried on during a near nadir overpass.
validation↗
In-flight radiometric calibration of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)
A reflectance-based method was used to provide an analysis of the in-flight radiometric performance of AVIRIS. Field spectral reflectance measurements of the surface and extinction measurements of the atmosphere using solar radiation were used as input to atmospheric radiative transfer calculations. Five separate codes were used in the analysis. Four include multiple scattering, and the computed radiances from these for flight conditions were in good agreement. Code-generated radiances were compared with AVIRIS-predicted radiances based on two laboratory calibrations (pre- and post-season of flight) for a uniform highly reflecting natural dry lake target. For one spectrometer (C), the pre- and post-season calibration factors were found to give identical results, and to be in agreement with the atmospheric models that include multiple scattering. This positive result validates the field and laboratory calibration technique. Results for the other spectrometers (A, B and D) were widely at variance with the models no matter which calibration factors were used. Potential causes of these discrepancies are discussed.
Conel, James E.↗
Field Results from Three Campaigns to Validate the Performance of the Miniaturized Laser Heterodyne Radiometer (Mini‐LHR) for Measuring Carbon Dioxide and Methane in the Atmospheric Column
In a collaboration between NASA GSFC and GWU, a low-cost, surface instrument is being developed that can continuously monitor key carbon cycle gases in the atmospheric column: carbon dioxide (CO2) and methane (CH4). The instrument is based on a miniaturized, laser heterodyne radiometer (LHR) using near infrared (NIR) telecom lasers. Despite relatively weak absorption line strengths in this spectral region, spectrallyresolved atmospheric column absorptions for these two molecules fall in the range of 60-80% and thus sensitive and precise measurements of column concentrations are possible. In the last year, the instrument was deployed for field measurements at Park Falls, Wisconsin; Castle Airport near Atwater, California; and at the NOAA Mauna Loa Observatory in Hawaii. For each subsequent campaign, improvement in the figures of merit for the instrument has been observed. In the latest work the absorbance noise is approaching 0.002 optical density (OD) noise on a 1.8 OD signal. An overview of the measurement campaigns and the data retrieval algorithm for the calculation of column concentrations will be presented. For light transmission through the atmosphere, it is necessary to account for variation of pressure, temperature, composition, and refractive index through the atmosphere that are all functions of latitude, longitude, time of day, altitude, etc. For temperature, pressure, and humidity profiles with altitude we use the Modern-Era Retrospective Analysis for Research and Applications (MERRA) data. Spectral simulation is accomplished by integrating short-path segments along the trajectory using the SpecSyn spectral simulation suite developed at GW. Column concentrations are extracted by minimizing residuals between observed and modeled spectrum using the Nelder-Mead simplex algorithm. We will also present an assessment of uncertainty in the reported concentrations from assumptions made in the meteorological data, LHR instrument and tracker noise, and radio frequency bandwidth and describe additional future goals in instrument development and deployment target
meteorological data↗
Salient Characteristics for Terrestrial Analog Engineering Test Sites
The use of terrestrial analog sites is an essential component of the development process for systems that are planned for lunar and planetary surfaces. These sites can also be valuable for training personnel who are expected to operate those systems. The fact that the site is an integral element, capable of influencing data and impacting test results, must not be overlooked. For tests performed in analog environments to be truly valid it is essential that the relevant characteristics of the employed sites be thoroughly understood. It is also critical that a comparative evaluation be made to assess the similarity of the analog sites to target planetary sites. Examples of relevant characteristics include terrain, soil properties, meteorology, geologic features, biological history, and remoteness. The importance of each of the characteristics varies with the type of extraterrestrial activity to be conducted. As a result, a site that is ideal for one purpose may be totally inadequate for another. It may also be appropriate to utilize multiple sites of increasing fidelity as the development process evolves. For example, early in the development process, the use of lower-fidelity sites may be elected - especially if they are available for a lower cost. Later, it may be necessary to employ higher-fidelity sites to capture greater realism, even if there is an associated increased cost. Finally, when interpreting the results of field tests, it is necessary to understand the sensitivity of the results to the relevant conditions. Knowledge of characteristics and sensitivity of results is particularly important when using field test results to validate analytical model predictions. This is especially true for activities that involve physical interaction with the site. Examples would include tests of rovers or other vehicles and associated trafficability modeling, spacesuit mobility tests, and tests associated with system deployment operations.
Watson, J.K.↗
High resolution upwind schemes for the three-dimensional incompressible Navier-Stokes equations
Based on flux-difference splitting, implicit high resolution schemes are constructed for efficient computations of steady-state solutions to the three-dimensional, incompressible Navier-Stokes equations in curvilinear coordinates. These schemes use first-order accurate Euler backward-time differencing and second-order central differencing for the viscous shear fluxes. Up to third-order accurate upwind differencing is achieved through a reconstruction of the solution from its cell averages. The reconstruction is accomplished by linear interpolation, where the node stencils are selected such that in regions of smooth solution the flow is highly resolved while spurious oscillations in regions of rapid changes in gradient are still suppressed. Fairly rapid convergence to steady-state solutions is attained with a completely vectorizable hybrid time-marching method. Flows around a sharp-edged delta wing are computed with the maximum accuracy of the upwind-differencing restricted to first-, second-, and third-order, to illustrate the effect of accuracy on the global and on the local vortical flow fields. The results are validated with experimental data.
Hartwich, PETER-M.↗
An unambiguous determination of the propagation of a compressional Pc 5 wave
A compressional Pc5 event observed by the ISEE-1 magnetometer and Medium Energetic Particle Experiment instrument on August 21 and 22, 1978, is examined. The propagation properties of the compressional waves were determined using a technique which utilizes the finite Larmor radius effects in the signature of the multichannel energetic ion detector. It is shown that this technique determines unambiguously the propagation characteristics of the wave in both the azimuthal and the radial directions in the plane perpendicular to the background magnetic field; the results remained valid even though heavy energetic ions with Larmor radii larger than proton Larmor radii were present in the plasma.
Lin, N.↗
Application of Multitemporal Remotely Sensed Soil Moisture for the Estimation of Soil Physical Properties
This paper demonstrates the use of multitemporal soil moisture derived from microwave remote sensing to estimate soil physical properties. The passive microwave ESTAR instrument was employed during June 10-18, 1992, to obtain brightness temperature (TB) and surface soil moisture data in the Little Washita watershed, Oklahoma. Analyses of spatial and temporal variations of TB and soil moisture during the dry-down period revealed a direct relationship between changes in T and soil moisture and soil physical (viz. texture) and hydraulic (viz. saturated hydraulic conductivity, K(sat)) properties. Statistically significant regression relationships were developed for the ratio of percent sand to percent clay (RSC) and K(sat), in terms of change components of TB and surface soil moisture. Validation of results using field measured values and soil texture map indicated that both RSC and K(sat) can be estimated with reasonable accuracy. These findings have potential applications of microwave remote sensing to obtain quick estimates of the spatial distributions of K(sat), over large areas for input parameterization of hydrologic models.
Mattikalli, N. M.↗
Physics-Based Retrieval of Surface Roughness Parameters for Bare Soils from Combined Active-Passive Microwave Signatures
In the past the effect of soil roughness was often considered secondary within the determination of soil moisture from remote sensing data. Several studies showed that accurate determination of soil roughness leads to an improved estimation of soil moisture. Two default parameters to describe the surface roughness are the standard deviation of the surface height variation 𝑠 and the surface correlation length 𝑙 with its corresponding autocorrelation function. Both parameters (𝑠,𝑙) affect the emissivity measured by radiometers as well as the backscattering observed by radars. In this study, we develop a physics-based approach to retrieve 𝑠 and 𝑙 by combining both microwave signals based on active-passive microwave covariation. To test the approach, containing a forward model and a retrieval algorithm, we used active/passive microwave data measured with the ComRAD truck-based SMAP simulator at L-band. Results and validations with corresponding field measurements on ground show that 𝑠 and 𝑙 can be estimated simultaneously when using this approach. The physics-based retrieval algorithm works robustly for two investigated test fields having an RMS-Error of 0.68 cm and 0.69 cm between the microwave-based and field-measured 𝑠-values, and of 3.13 cm and 3.04 cm for 𝑙-values. The first validation of the results reveals that the influence of the autocorrelation function, needed within the retrieval, is distinct.
correlation length↗
Vectorizable implicit algorithms for the flux-difference split, three-dimensional Navier-Stokes equations
The computational efficiency of four vectorizable implicit algorithms is assessed when applied to calculate steady-state solutions to the three-dimensional, incompressible Navier-Stokes equations in general coordinates. Two of these algorithms are characterized as hybrid schemes; that is, they combine some approximate factorization in two coordinate directions with relaxation in the remaining spatial direction. The other two algorithms utilize an approximate factorization approach which yields two-factor algorithms for three-dimensional systems. All four algorithms are implemented in identical high-resolution upwind schemes for the flux-difference split Navier-Stokes equations. These highly nonlinear schemes are obtained by extending an implicit Total Variation Diminishing (TVD) scheme recently developed for linear one-dimensional systems of hyperbolic conservation laws to the three-dimensional Navier-Stokes equations. The computation of vortical flow over a sharp-edged, thin delta wing has been chosen as a common numerical test case. The convergence of the algorithms is discussed and the accuracy of the computed flow-field results is assessed. The validity of the present results are demonstrated by a comparison with experimental data.
Hartwich, P. M.↗
Vegetation Height Estimate in Rice Fields Using Single Polarization TanDEM-X Science Phase Data
This study presents the retrieval of rice paddy height using single polarization (single-pol) interferometric SAR (InSAR) data by means of model-based height inversion without an external DEM. A total of eight TanDEM-X (TDX) scenes were used and the TDX images were; acquired using a large cross-track baseline configuration during the TDX Science Phase (June–August 2015). A single-pol inversion approach for a flooded rice field is proposed and evaluated over the Buan test site in South Korea. A novel approach is adopted for the estimation of the ground (i.e., water level) interferometric phase within a flooded rice paddy from TDX data acquired during a period of early rice growth. It is consequently possible to apply the model-based inversion algorithm to the single-pol InSAR data. Rice height maps during the rice growth cycle presented and validated by field measurements. The results demonstrated the high performance of the inversion with a correlation coefficient of 0.78 and an RMSE of 0.10 m. The proposed methodology will be useful to monitor rice plants and to predict a gross rice yield, along with dual and fully polarimetric interferometric SAR data.
Lee, Seung-Kuk↗
Three-Component Laser Velocimetry Of Complex Flows
Since aeronautical research community depends on computations, to extent that predictions of flow-field behavior used without supporting data, question arises whether predictions of complex flow fields represent real world. In experiment, laser velocimetry used to validate computed predictions of complex flow fields. Results demonstrated capabilities of orthogonal three-component laser velocimeter to obtain data necessary to validate computational codes used.
Meyers, James F.↗
Noise Characteristics of a Four-Jet Impingement Device Inside a Broadband Engine Noise Simulator
The noise generation mechanisms for four directly impinging supersonic jets are investigated employing implicit large eddy simulations with a higher-order accurate weighted essentially non-oscillatory shock-capturing scheme. Impinging jet devices are often used as an experimental apparatus to emulate a broadband noise source. Although such devices have been used in many experiments, a detailed investigation of the noise generation mechanisms has not been conducted before. Thus, the underlying physical mechanisms that are responsible for the generation of sound waves are not well understood. The flow field is highly complex and contains a wide range of temporal and spatial scales relevant for noise generation. Proper orthogonal decomposition of the flow field is utilized to characterize the unsteady nature of the flow field involving unsteady shock oscillations, large coherent turbulent flow structures, and the sporadic appearance of vortex tubes in the center of the impingement region. The causality method based on Lighthill's acoustic analogy is applied to link fluctuations of flow quantities inside the source region to the acoustic pressure in the far field. It will be demonstrated that the entropy fluctuation term in the Lighthill's stress tensor plays a vital role in the noise generation process. Consequently, the understanding of the noise generation mechanisms is employed to develop a reduced-order linear acoustic model of the four-jet impingement device. Finally, three linear acoustic FJID models are used as broadband noise sources inside an engine nacelle and the acoustic scattering results are validated against far-field acoustic experimental data.
Broadband↗
Thermal conductivities of plasmas in general force fields.
Plasma thermoconductivity in general force fields, showing validity of Meador-Staton results in case of ambipolar diffusion and nonuniform total pressure
AMBIPOLAR DIFFUSION↗
Earth Science Data Archive and Access at the NASA/Goddard Space Flight Center Distributed Active Archive Center (DAAC)
The Goddard Distributed Active Archive Center (DAAC), as an integral part of the Earth Observing System Data and Information System (EOSDIS), is the official source of data for several important earth remote sensing missions. These include the Sea-viewing Wide-Field-of-view Sensor (SeaWiFS) launched in August 1997, the Tropical Rainfall Measuring Mission (TRMM) launched in November 1997, and the Moderate Resolution Imaging Spectroradiometer (MODIS) scheduled for launch in mid 1999 as part of the EOS AM-1 instrumentation package. The data generated from these missions supports a host of users in the hydrological, land biosphere and oceanographic research and applications communities. The volume and nature of the data present unique challenges to an Earth science data archive and distribution system such as the DAAC. The DAAC system receives, archives and distributes a large number of standard data products on a daily basis, including data files that have been reprocessed with updated calibration data or improved analytical algorithms. A World Wide Web interface is provided allowing interactive data selection and automatic data subscriptions as distribution options. The DAAC also creates customized and value-added data products, which allow additional user flexibility and reduced data volume. Another significant part of our overall mission is to provide ancillary data support services and archive support for worldwide field campaigns designed to validate the results from the various satellite-derived measurements. In addition to direct data services, accompanying documentation, WWW links to related resources, support for EOSDIS data formats, and informed response to inquiries are routinely provided to users. The current GDAAC WWW search and order system is being restructured to provide users with a simplified, hierarchical access to data. Data Browsers have been developed for several data sets to aid users in ordering data. These Browsers allow users to specify spatial, temporal, and other parameter criteria in searching for and previewing data.
Leptoukh, Gregory↗
CFD Computation of Broadband Fan Interaction Noise
In this study, a 3-D, unsteady, Reynolds Averaged Navier Stokes CFD code coupled to an acoustic calculation is used to predict the contribution of the exit guide vanes to broadband fan noise. The configuration investigated is that corresponding to the NASA Source Diagnostic Test (SDT) 22-in fan rig. Then an acoustic model introduced by Nallasamy which is based on 2-D strip theory is used to compute the broadband rotor-stator interaction noise. One configuration from the SDT matrix is considered here: the fan speed correlating to approach, and outlet guide vane count designed for cut-off of the blade passage frequency. Thus, in the chosen configuration, there are 22 rotor blades and 54 stator blades. The stators are located 2.5 tip chords downstream of the rotor trailing edge. The RANS computations are used to obtain the spectra of the unsteady surface pressure on the exit guide vanes. This surface pressure is then integrated together with the Green's function for and infinite cylindrical duct to obtain the acoustic field. The results from this investigation validate the use of the CFD code along with the acoustic model for broadband fan noise predictions. The validation enables future investigations such as the determination of rotor tip clearance and stator solidity effects on fan rotor-stator interaction noise.
Grace, Sheryl M.↗
The effects of AVIRIS atmospheric calibration methodology on identification and quantitative mapping of surface mineralogy, Drum Mountains, Utah
The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) measures reflected light in 224 contiguous spectra bands in the 0.4 to 2.45 micron region of the electromagnetic spectrum. Numerous studies have used these data for mineralogic identification and mapping based on the presence of diagnostic spectral features. Quantitative mapping requires conversion of the AVIRIS data to physical units (usually reflectance) so that analysis results can be compared and validated with field and laboratory measurements. This study evaluated two different AVIRIS calibration techniques to ground reflectance: an empirically-based method and an atmospheric model based method to determine their effects on quantitative scientific analyses. Expert system analysis and linear spectral unmixing were applied to both calibrated data sets to determine the effect of the calibration on the mineral identification and quantitative mapping results. Comparison of the image-map results and image reflectance spectra indicate that the model-based calibrated data can be used with automated mapping techniques to produce accurate maps showing the spatial distribution and abundance of surface mineralogy. This has positive implications for future operational mapping using AVIRIS or similar imaging spectrometer data sets without requiring a priori knowledge.
Kruse, Fred A.↗
The Effects of Magnetic Nozzle Configurations on Plasma Thrusters
Over the course of eight years, the Ohio State University has performed research in support of electric propulsion development efforts at the NASA Lewis Research Center, Cleveland, OH. This research has been largely devoted to plasma propulsion systems including MagnetoPlasmaDynamic (MPD) thrusters with externally-applied, solenoidal magnetic fields, hollow cathodes, and Pulsed Plasma Microthrusters (PPT's). Both experimental and theoretical work has been performed, as documented in four master's theses, two doctoral dissertations, and numerous technical papers. The present document is the final report for the grant period 5 December 1987 to 31 December 1995, and summarizes all activities. Detailed discussions of each area of activity are provided in appendices: Appendix 1 - Experimental studies of magnetic nozzle effects on plasma thrusters; Appendix 2 - Numerical modeling of applied-field MPD thrusters; Appendix 3 - Theoretical and experimental studies of hollow cathodes; and Appendix 4 -Theoretical, numerical and experimental studies of pulsed plasma thrusters. Especially notable results include the efficacy of using a solenoidal magnetic field downstream of a plasma thruster to collimate the exhaust flow, the development of a new understanding of applied-field MPD thrusters (based on experimentally-validated results from state-of-the art, numerical simulation) leading to predictions of improved performance, an experimentally-validated, first-principles model for orificed, hollow-cathode behavior, and the first time-dependent, two-dimensional calculations of ablation-fed, pulsed plasma thrusters.
Turchi, P. J.↗