SEARCH · Search NASA
Results for “furan”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electrochemically Triggered Chain Reactions for the Conversion of Furan Derivatives
Not provided.
Optimized Incorporation of Furan into Diketopyrrolopyrrole-Based Conjugated Polymers for Organic Field-Effect Transistors
Flexible electronics have received considerable attention in the past decades due to their promising application in rollable display screens, wearable devices, implantable devices, and other electronic applications. Here, in particular, conjugated polymers are favored for flexible electronics due to their mechanical flexibility and potential for solution-processed fabrication techniques, such as blade-coating, roll-to-roll printing, and high-throughput printing allowing for high-performance transistor devices. Thiophene is the prevailing conjugated unit to construct these conjugated polymers due to its favorable electronic properties. On the other hand, furans are among the few conjugated moieties that are easily derived from bio renewable resources. To promote sustainability, we selectively introduced furan into the conjugated backbone of a high-mobility polymer scaffold and systematically studied the effect on the microstructure and charge transport. We show that partially and selectively replacing thiophene units with furan can yield nearly comparable performance compared to the all-thiophene polymer. This strategy offers an improvement in the sustainability of the polymer by incorporating bio-sourced furan without sacrificing the high-performance characteristics. Meanwhile, polymers with incorrect or complete furan incorporation show reduced mobilities. This work serves to develop coherent structure–morphology–performance relationships; such knowledge will establish guidelines for the future development of sustainable, furan-based conjugated materials.
Enhancing Biopolyester Backbone Rigidity with an Asymmetric Furanic Monomer
Biobased furanic polyesters can exhibit performance advantages over petroleum-derived polyesters, primarily due to their rigid furan-containing backbones. Herein, we develop two strategies to polymerize methyl 5-hydroxymethyl furanoate to poly(5-hydroxymethyl furanoate) (PHMF), a furan-based polyester with even greater backbone rigidity than poly(ethylene furanoate). Thermal, spectroscopic, and computational investigations of PHMF alongside analogous furan-based and phenyl-based polyesters suggest that the high furan content of PHMF leads to its high glass transition temperature, slow crystallization kinetics, and low amorphous mobility. Molecular dynamics simulations suggest that while the backbone of PHMF is exceptionally rigid, its amorphous phase is denser than its phenyl analog due to noncovalent interchain interactions. Together, these results highlight how asymmetric furan-based monomers can modulate key properties in biobased polyesters.
Aluminosilicate-mediated C(sp 2 )–H alkylation of furans using allylic alcohols
Alkyl furans have a variety of applications and therefore numerous approaches exist for their synthesis. While these methods can be effective, there are various drawbacks largely associated with the waste generated. Herein we report a novel method for the direct coupling of readily available furans with allylic alcohols. These include terpenoid alcohols such as geraniol and prenol, which are readily available from renewable, bio-derived feedstocks. Furthermore, the reaction is facilitated using aluminosilicates, including zeolites. It was found that Y-type zeolites were highly effective at mediating the coupling with furan, giving the 2-alkylated furan high yields. While various allylic alcohols were effective for this reaction, the identity of the furan proved to have a drastic impact on reactivity. For substituted furans, the reaction proved most effective with an amorphous aluminosilicate and calculations later revealed potential key factors in further developing and generalizing this methodology.
Techno-Economic Assessment for the Production of Hydrocarbon Fuels via Catalytic Upgrading of Furans
This technical report documents the techno-economic analysis (TEA) implications of a biochemical/catalytic pathway for the production of long-chain hydrocarbon fuels in support to the multi-lab Catalytic Upgrading of Biochemical Intermediates (CUBI) project within the Chemical Catalysis for Bioenergy Consortium (ChemCatBio). Two distinct conceptual biorefineries centered around the process encompassing sugar dehydration to furans, aldol condensation between furans and a ketone (methyl ethyl ketone [MEK]), and a final step of hydrotreating to obtain hydrocarbons in the C 14 -C 16 range are considered: an integrated plant that simultaneously produces both furans (furfural and HMF) and ketone (MEK via 2,3-butanediol [BDO]) from sugars and a dedicated facility focused on producing furans from corn stover hydrolysate and procuring the ketone externally. In either plant, the main coproducts are adipic acid (derived from lignin) and sodium sulfate. The results from the assessment are quite comparable to those reported in previous design case focused on biological conversion of sugars to fermentation intermediates with subsequent catalytic upgrading of those intermediates to hydrocarbon fuels, thus presenting another viable alternative pathway to achieve similar fuel cost targets through purely catalytic upgrading of sugars. Since this study considers long-term performance targets for the full pathway dedicated to sugar upgrading to fuels, the critical remaining research points needed to achieve future cost goals are also discussed. Finally, this report presents a single-point sensitivity analysis around selected parameters to identify the major cost drivers of the biorefineries and provides a qualitative discussion on additional opportunities for cost reduction within the proposed concepts, namely through adding value to furans, to coproducts that may be obtained following BDO dehydration, and to lignin through alternative pathways.
Effect of Ni Dopant on Furan Activation over Mo 2 C Surface: Insights from First-Principles-Based Microkinetic Modeling
Here, the role of Ni dopant in a molybdenum carbide (Mo 2 C) catalyst for butadiene and propyne production from furan is investigated by using a Mo 2 C(001) surface model and first-principles-based microkinetic modeling (MKM). A reaction mechanism including 18 reaction steps is generated to compute the turnover frequency (TOF) of butadiene and propyne from furan gas. The butadiene production is dominant with the TOF being 3-6 orders of magnitude higher than the TOF of propyne on a bare Mo 2 C surface due to an active C-O bond scission reaction compared to C-C bond cleavage reaction. The exothermic binding of ring-opened furan (CHCHCHCHO*) inhibits the activity of a bare Mo 2 C surface for butadiene and propyne production. Calculations predict that Mo 2 C surface modification with a Ni dopant energetically destabilizes the adsorption of CHCHCHCHO*, which facilitates the formation of butadiene and propyne. In the presence of Ni dopants on a Mo 2 C(001) surface, the selectivity toward the butadiene formation is decreased compared to propyne due to relatively favorable C-C bond scission as opposed to the C-O bond scission. This first-principles-based study provides mechanistic and kinetic insights into the role of dopants in cost-efficient Mo 2 C catalysts during the vapor phase conversion of furan to gaseous products.
Experimental and theoretical study of the soot-forming tendencies of furans as potential biofuels
Sustainably-produced biofuels, including furans derived from lignocellulosic biomass, are being studied as potential next-generation fuels. Biofuels have unique structures that are absent in conventional fuels and they potentially emit fewer particulates than conventional fuels because of the presence of oxygen atoms. In this work, we focus on quantification and measurement of sooting tendency. A set of furans was selected and their sooting tendencies were characterized by Yield Sooting Index (YSI), which was obtained by measuring the line-of-sight spectral radiance (LSSR) of a coflow laminar diffusion flame doped with 1000 ppm of each test fuel. The measured YSIs are lower than traditional gasoline fuels and benzenoid aromatics (e.g., YSIbenzene = 100). We also performed numerical simulations with a detailed chemical kinetic mechanism to analyze the flame chemistry of 2-methylfuran (2MF). 4→5 H-atom migration in the furan ring causes 31.0% of the total decomposition and is the dominant fuel consumption pathway leading to soot. DFT calculations via the G4 composite method were carried out to obtain activation energies (Ea) and bond dissociation energies (BDE). The results showed that the 4→5 H-atom migration in the furan ring has the second lowest Ea and subsequently forms a 1,2-diene-substituted ketone derivative as a stable species. The ring-opening products of the 4→5 H-atom migration are propyne + a linear ketene for 2-n-alkylfurans, and 1-butyne + a methyl-substituted ketene for 2-t-butylfuran. These results can explain the trends of the measured YSIs of 2-alkylfurans.
Adsorption of furan, hexanoic acid, and alkanes in a hierarchical zeolite at reaction conditions: Insights from molecular simulations
Hierarchical zeolites containing both micropores and mesopores are valuable catalysts for facilitating reactions of large molecules. Furan acylation by fatty acids is a promising reaction for valorizing biomass, and the self-pillared pentasil (SPP) zeolite was found to perform particularly well for this reaction. To better understand the distribution of molecules in hierarchical zeolites at the elevated temperature (T = 523 K) and the elevated pressure (p >1 bar) associated with typical reaction conditions, unary and binary adsorption were predicted using Monte Carlo simulations in the isothermal–isobaric Gibbs ensemble. Adsorption of six species (furan, hexanoic acid, -hexane, -decane, -tetradecane, and 3,6-diethyloctane) was investigated from vapor, liquid, and supercritical phases, and loadings into the micropores, onto the mesopore surface, and in the mesopore interior of SPP were obtained. As pressure increases, -alkanes fill the micropores before loading the surface and then the interior of the mesopore, while furan and hexanoic acid adsorb strongly to the mesopore surface due to hydrogen bonding interactions with surface silanols. Hydrogen bonding interactions also draw hexanoic acid molecules in the micropore region toward the pore mouths, so their carboxylic acid group forms H-bonds with silanols, while the alkyl tails interact with the micropore walls. Mesopore condensation is observed for molecules below their critical point, and occurs when the Gibbs free energy of transfer into the mesopore interior and onto the mesopore surface converge. When hexanoic acid adsorption occurs in the presence of alkane solvents, then the selectivity and spatial distribution of hexanoic acid in the micropores and on the surface can be tuned by adjusting the fluid pressure and the alkane length and/or branching.
CYP76BK1 orthologs catalyze furan and lactone ring formation in clerodane diterpenoids across the mint family
The Lamiaceae (mint family) is the largest known source of furanoclerodanes, a subset of clerodane diterpenoids with broad bioactivities including insect antifeedant properties. The Ajugoideae subfamily, in particular, accumulates significant numbers of structurally related furanoclerodanes. The biosynthetic capacity for formation of these diterpenoids is retained across most Lamiaceae subfamilies, including the early-diverging Callicarpoideae which forms a sister clade to the rest of Lamiaceae. VacCYP76BK1, a cytochrome P450 monooxygenase from Vitex agnus-castus, was previously found to catalyze the formation of the proposed precursor to furan and lactone-containing labdane diterpenoids. Through transcriptome-guided pathway exploration, we identified orthologs of VacCYP76BK1 in Ajuga reptans and Callicarpa americana. Functional characterization demonstrated that both could catalyze the oxidative cyclization of clerodane backbones to yield a furan ring. Subsequent investigation revealed a total of 10 CYP76BK1 orthologs across six Lamiaceae subfamilies. Through analysis of available chromosome-scale genomes, we identified four CYP76BK1 members as syntelogs within a conserved syntenic block across divergent subfamilies. This suggests an evolutionary lineage that predates the speciation of the Lamiaceae. Functional characterization of the CYP76BK1 orthologs affirmed conservation of function, as all catalyzed furan ring formation. Additionally, some orthologs yielded two novel lactone ring moieties. The presence of the CYP76BK1 orthologs across Lamiaceae subfamilies closely overlaps with the distribution of reported furanoclerodanes. Together, the activities and distribution of the CYP76BK1 orthologs identified here support their central role in furanoclerodane biosynthesis within the Lamiaceae family. Our findings lay the groundwork for biotechnological applications to harness the economic potential of this promising class of compounds.
Processes for the preparation of alkyl furans using bifunctional copper catalysts
The present disclosure relates to the selective hydrodeoxygenation (HDO) of bio-based furanic ketones with a bifunctional copper-based catalyst in the presence of a solvent to prepare alkyl furans with high yield, purity, and scalability. The alkyl furans prepared herein are useful in the preparation of surfactants.
Method for making substituted furan compound embodiments and derivatives thereof
Disclosed herein are embodiments of a method for making substituted furan compounds using bioderived coupling partners and a heterogeneous catalyst. In particular disclosed embodiments, the method comprises coupling a furan compound with the coupling partner (e.g., an aliphatic or heteroaliphatic coupling partner) in the presence of the heterogeneous catalyst to provide the substituted furan compound.
Understanding the Effect of Side Reactions on the Recyclability of Furan–Maleimide Resins Based on Thermoreversible Diels–Alder Network
We studied the effect of side reactions on the reversibility of epoxy with thermoreversible Diels–Alder (DA) cycloadducts based on furan and maleimide chemistry. The most common side reaction is the maleimide homopolymerization which introduces irreversible crosslinking in the network adversely affecting the recyclability. The main challenge is that the temperatures at which maleimide homopolymerization can occur are approximately the same as the temperatures at which retro-DA (rDA) reactions depolymerize the networks. Here we conducted detailed studies on three different strategies to minimize the effect of the side reaction. First, we controlled the ratio of maleimide to furan to reduce the concentration of maleimide groups which diminishes the effects of the side reaction. Second, we applied a radical-reaction inhibitor. Inclusion of hydroquinone, a known free radical scavenger, is found to retard the onset of the side reaction both in the temperature sweep and isothermal measurements. Finally, we employed a new trismaleimide precursor that has a lower maleimide concentration and reduces the rate of the side reaction. Our results provide insights into how to minimize formation of irreversible crosslinking by side reactions in reversible DA materials using maleimides, which is important for their application as novel self-healing, recyclable, and 3D-printable materials.
Thiol-promoted catalytic synthesis of high-performance furan-containing lubricant base oils from biomass derived 2-alkylfurans and ketones
About 97% of lubricant base oils are currently sourced from petroleum and the majority of the rest is produced from vegetable oils. We demonstrate a promising catalytic route to produce base oils from lignocellulosic biomass-derived 2-alkylfurans and ketones via carbon–carbon coupling in neat conditions. Among several homogeneous and heterogeneous acid catalysts tested, a perfluorinated sulfonic acid (Aquivion PW79S) exhibits the best catalytic performance and yields up to 90% renewable furan-containing base oils with the use of a thiol promotor. The effects of the acid strength of the catalysts, molecular size and structure of thiols and ketones, and fraction of thiols are studied. Electronic structure calculations elucidate the reaction pathway and indicate that the thiol reduces the barrier of the rate-determining dehydration step. The structure and properties of base oils can be tuned by using different synthons. Here, these base oils have excellent properties and can be competitive with or surpass the commercial synthetic alkylnaphthalene and furan-containing bio-ester base oils.
Solving a furan fatty acid biosynthesis puzzle
Furan fatty acids (FuFAs), characterized by a central furan moiety, are widely dispersed in nature, but their biosynthetic origins are not clear. A new study from Lemke et al. employs a full court press of genetics, genomics, biochemical, and advanced analytical techniques to dissect the biosynthetic pathway of mono- and dimethyl FuFAs and their intermediates in two related bacteria. Overall these findings lay the foundation both for detailed study of these novel enzymes and for gaining further insights into FuFA functions.
Simultaneous expression of an endogenous spermidine synthase and a butanol dehydrogenase from Thermoanaerobacter pseudethanolicus in Clostridium thermocellum results in increased resistance to acetic acid and furans, increased ethanol production and an increase in thermotolerance
Abstract Background Sensitivity to inhibitors derived from the pretreatment of plant biomass is a barrier to the consolidated bioprocessing of these complex substrates to fuels and chemicals by microbes. Spermidine is a low molecular weight aliphatic nitrogen compound ubiquitous in microorganisms, plants, and animals and is often associated with tolerance to stress. We recently showed that overexpression of the endogenous spermidine synthase enhanced tolerance of the Gram-positive bacterium, Clostridium thermocellum to the furan derivatives furfural and HMF. Results Here we show that co-expression with an NADPH-dependent heat-stable butanol dehydrogenase from Thermoanaerobacter pseudethanolicus further enhanced tolerance to furans and acetic acid and most strikingly resulted in an increase in thermotolerance at 65 °C. Conclusions Tolerance to fermentation inhibitors will facilitate the use of plant biomass substrates by thermophiles in general and this organism in particular. The ability to grow C. thermocellum at 65 °C has profound implications for metabolic engineering.
Thermochemical Data for Furan-based Monomer Candidates for Frontal Ring-Opening Metathesis Polymerization (FROMP)
This dataset includes 471 furan-based monomer candidates for frontal ring-opening metathesis polymerization (FROMP) and relevant thermochemistry as calculated with density functional theory (DFT). The monomer candidates were combinatorically enumerated using Diels-Alder reactions of furan derivatives as dienes and four types of dienophiles (alkenes, alkynes, allenes, and benzynes). Common substituents were enumerated for the dienophile classes, and methyl substitution on the diene was explored. We used the SMILES arbitrary target specification (SMARTS) language to produce monomers and ring-opened structures from diene and dienophile precursor SMILES, and we studied the ring-opening reaction using a homodesmotic equation with ethene. RDKit conformers were initially generated from SMILES, then optimized with GFN2-xTB. The two conformers lowest in energy were then optimized with DFT using the wb97x-D3 functional, def2-TZVP basis set, and def2/J auxiliary basis set. Gibbs free energy corrections were obtained through frequency calculations. Structures with imaginary frequencies below -50 cm^{-1} were excluded from this work, and smaller imaginary modes were flipped to be positive for free energy calculations. Modes below 50 cm^{-1} were treated with the modified rigid rotor approximation, and all thermochemical values were calculated at T=200C. The CSV file contains the monomer SMILES, the free energy of reaction for Diels-Alder addition (G_DA_200), and the enthalpy of the ring-opening reaction (H_RO_200). All energies are given in kcal/mol. An interactive HTML is also included to visualize the monomers in this dataset.