Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen carriers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Electrochemical Cycling of Liquid Organic Hydrogen Carriers as a Sustainable Approach for Hydrogen Storage and Transportation

Hydrogen (H 2 ), as a high-energy-density molecule, offers a clean solution to carry energy. However, the high diffusivity and low volumetric density of H 2 pose a challenge for long-term storage and transportation. Liquid organic hydrogen carriers (LOHCs) have been suggested as a strategic way to store and transport hydrogen in stable molecules. More so, electrochemical LOHC cycling renders an opportunity to utilize renewable energy for hydrogen storage and transportation toward the goal of eliminating carbon emissions. In this Perspective, examples of electrochemical reactions of organic molecules and their suitability for LOHC couples are examined. A comparative carbon footprint assessment of electrochemical LOHC cycling processes against thermochemical and hybrid LOHC cycling processes was performed. The electrochemical LOHC cycling process had the lowest relative carbon footprint only when highly concentrated LOHCs were used as the feed or when purification of the LOHC product was not required. The carbon footprint in electrochemical cycling of diluted LOHC was primarily contributed to by the LOHC distillation separation process. A sensitivity analysis showed the carbon footprint LOHC concentration dependence during the electrochemical cycling process. Moreover, the electrolyte composition significantly affects the carbon footprint during electrochemical LOHC cycling. Energy utilization, water usage, and toxicity for electrochemical LOHC cycling are discussed to provide an overview for better economic and environmental practices. There are significant opportunities in the electrochemical cycling of LOHCs if appropriate conditions such as high concentrations of reactant, reversible redox cycling ability, high Faradaic efficiencies, and catalyst stabilities are achieved.

25 ENERGY STORAGE↗

In-situ dehydrogenation of lignin-based jet fuel: A novel and sustainable liquid organic hydrogen carrier

A new and sustainable liquid organic hydrogen carrier, Lignin Jet Fuel-based Liquid Organic Hydrogen Carrier (LJF-HyC), has been discovered. This innovative LOHC is created from Lignin Jet Fuel (LJF) through dehydrogenation reactions. The process was carried out in situ using platinum nanoparticles supported on zeolite, resulting in a significant increase in aromatic carbon content. This increase indicates the successful formation of aromatic rings via C–H dissociation. In-situ Nuclear Magnetic Resonance (NMR) and gas chromatographic analyses revealed the formation of unsaturated and partially unsaturated compounds, including alkylbenzenes, tetralins, naphthalenes with double bond equivalence of 4–8, from six apparent reaction pathways, four of which can be major. The original LJF, consisting primarily of mono-, di-, and tricyclohexylalkanes (96 wt%), was converted to dehydrogenated products, constituting approximately 18.5 wt% of the LJF composition. These findings pave the way for developing sustainable hydrogen carriers derived from sustainable aviation fuels.

08 HYDROGEN↗

Development of Magnesium Borane Containing Solutions of Furans and Pyrroles as Reversible Liquid Hydrogen Carriers (Final Technical Report)

The objective of this project was the development of a two-way liquid hydrogen carrier having a greater energy efficiency and lower delivery costs than either existing hydrogen carriers or conventional compressed H 2 gas transport technology. It was hypothesized that a hydrogen carrier consisting of solutions of furans and pyrroles containing Mg(BH 4 ) 2 and pincer complex catalyst, would have more than twice the volumetric available hydrogen density of the conventional two-way liquid hydrogen carrier, methylcyclohexane. Most notably the envisioned liquid hydrogen carrier would: 1) maintain high product selectivity through multiple cycles of dehydrogenation and hydrogenation; and 2) undergo rapid dehydrogenation and re-hydrogenation. The project was specifically aimed at the demonstration of at least one LOHC solution of Mg(BH 4 ) 2 and pincer catalyst that releases ≥ 50 g H 2 /L at ≤ 200 °C upon dehydrogenation and undergoes ≥ 25% rehydrogenation under 100 atm of H 2 at ≤ 200 °C.

08 HYDROGEN↗

Ethanol as a hydrogen carrier with a value-added co-product

Traditional liquid organic hydrogen carriers rely on return/re-charge of the carrier and financial subsidy. We show that ethanol, available at scale from fermentation, can be a revenue-positive hydrogen carrier, owing to the value of its potassium acetate co-product, itself an emerging fertilizer. Traditional liquid organic hydrogen carriers (LOHCs) rely on return/re-charge of the carrier and financial subsidy. We show here that ethanol, available at scale from fermentation, can be a revenue-positive hydrogen carrier, owing to the value of its potassium acetate co-product, itself an emerging fertilizer.

Rander, Andrew R↗

Roles of Solvent in the Catalytic Hydrogen Release from Liquid Organic Hydrogen Carriers: Chemical, Thermodynamical and Technological Aspects

A Liquid Organic Hydrogen Carrier (LOHC) enables the storage and transport of hydrogen at ambient pressures and temperatures in a safe and convenient form using current infrastructure. However, it is challenging to directly compare reactivity and selectivity for hydrogen release, especially when comparing the catalytic efficiencies of neat LOHCs to highly diluted LOHCs in different solvents, reaction conditions, and catalysts. This work evaluates the role of solvents in catalysis and quantifies the energy efficiency of the overall process. The presence of solvent dilutes the volumetric density of available hydrogen, but may be necessary to achieve optimal catalysts stability, reactivity, and product selectivity. With respect to the reaction conditions as determined by thermodynamics, solvents with higher vapor pressures than that of the carrier can cause the erroneous impression of a more favorable reaction equilibrium. Concerning energy efficiency, solvents can result in increased energy demand for hydrogen release as the inert solvent must be heated to reaction temperatures required for release of H 2 from the LOHC. Further, this work recommends that investigations of catalyst reactivity should be carried out at different ratios of solvent to LOHC to understand how the reactivity changes and what the implications are for maximizing energy density and catalyst stability and reactivity. Investigations should also consider how these implications will affect the technical needs of applications intended for the LOHC system. Based on the results of this study, it is advised to focus research activities on LOHC systems with a gravimetric solvent content below about 50% as the thermodynamic disadvantages become very pronounced beyond this threshold.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid organic hydrogen carriers for long-duration energy storage

Liquid organic hydrogen carrier (LOHC) systems are an excellent alternative to pressurized gas and liquid hydrogen storage technologies due to their high volumetric storage capacities and straightforward adaptation to existing infrastructure. Here, we investigate various molecular and heterogenized Ru, Mn, and Fe catalysts for the reversible (de)hydrogenation of polyols. Mn catalysts, Mn-MACHO(Ph) (1) and Mn-MACHO(iPr)BH 4 (2-BH 4 ) were found to maintain catalytic activity for hydrogen production comparable to the Ru analogs, with greater than 98% conversion of 1,4 butanediol and quantitative hydrogen production. Furthermore, to assess the viability of utilizing heterogenized molecular catalysts for 1,4 butanediol (de)hydrogenation, molecular catalysts, Mn-MACHO(Ph), Ru-MACHO(Ph), and Ru-9, were polymerized to form Mn-MACHO-Poly, Ru-MACHO-Poly, and Ru-9-Poly respectively. These catalysts were then used to assess (de)hydrogenation of polyols, ethylene glycol and 1,4 butanediol. These studies reveal that Ru-MACHO-Poly is an efficient dehydrogenation catalyst with 99% conversion and a hydrogen percent yield of 96%. In addition, Ru-MACHO-Poly is a competent hydrogenation catalyst with approximately 98% conversion back to 1,4 butanediol based on quantitative NMR measurements. Overall, the data suggest these molecular and heterogenized catalysts have potential for practical use in polyalcohol-based LOHC systems.

08 HYDROGEN↗

Hydrogen Carriers for Renewable Microgrid System Applications

Utility-scale energy storage can help improve grid reliability, reduce costs, and promote faster adoption of intermittent sources such as solar and wind. This paper analyzes the technical aspects and economics of standalone microgrids operating on intermittent power combined with hydrogen energy storage. It explores the feasibility of using dibenzyltoluene (DBT) as a liquid organic hydrogen carrier to absorb excess energy during periods of high supply and polymer electrolyte fuel cells to generate electrical energy during periods of low supply. A comparative analysis is conducted on three power demand scenarios (industrial, residential, and office), in conjunction with three alternative energy sources: solar, wind and wind–solar mix. A mixed system of solar and wind energy can maintain an annual average efficiency above 70%, except for residential power demand, which lowered the efficiency to 67%. A balanced combination of wind and solar power was the most cost-effective option. The current levelized cost of electricity (LCOE) for industrial power demand was estimated to 15 ¢/kWh, and it is projected to decrease to 9 ¢/kWh in the future. For residential power demand, the LCOE was 45% higher due to the demand profile. In comparison, battery storage is significantly more expensive than hydrogen storage, even with future cost projections, increasing the LCOE between 60 and 120 ¢/kWh.

PEM electrolysis↗

Accurate Dehydrogenation Enthalpies Dataset for Liquid Organic Hydrogen Carriers

This contribution presents a comprehensive extension of the QM9 dataset (originally at 133 K molecules) with the calculation of G4MP2 enthalpies for 9,841 molecules, featuring up to nine heavy atoms. We present QM9-LOHC, a (de)hydrogenation dataset of 10,373 reactions, including a minimum of 5.5% weight hydrogen storage capacity in line with the Department of Energy standards for Liquid Organic Hydrogen Carriers (LOHC). By utilizing the accurate quantum chemical method G4MP2 we expand the QM9 database and explore new avenues for the exploration of hydrogen storage technologies (electrochemical LOHCs, alkali metal-LOHCs, and mixtures of LOHCs). The QM9-LOHC dataset, with its focus on reactions that vary only by hydrogen saturation levels, provides a needed data resource for advancing the design and optimization of both conventional and innovative LOHC systems, and high-fidelity data for molecular discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic analysis of alternate energy carriers, hydrogen and chemical heat pipes

The paper discusses the production concept and efficiency of two new energy transmission and storage media intended to overcome the disadvantages of electricity as an overall energy carrier. These media are hydrogen produced by water-splitting and the chemical heat pipe. Hydrogen can be transported or stored, and burned as energy is needed, forming only water and thus obviating pollution problems. The chemical heat pipe envisions a system in which heat is stored as the heat of reaction in chemical species. The thermodynamic analysis of these two methods is discussed in terms of first-law and second-law efficiency. It is concluded that chemical heat pipes offer large advantages over thermochemical hydrogen generation schemes on a first-law efficiency basis except for the degradation of thermal energy in temperature thus providing a source of low-temperature (800 K) heat for process heat applications. On a second-law efficiency basis, hydrogen schemes are superior in that the amount of available work is greater as compared to chemical heat pipes.

Cox, K. E.↗

Life Cycle Assessment of Formic Acid as a Liquid Hydrogen Carrier

This work presents a life cycle analysis of the transport and processing for formic acid into hydrogen. The system boundary begins at the formic acid plant gate and ends with hydrogen end use. The functional unit is 1 kg of hydrogen delivered to end use, 1 kWh for electricity generation, and 1 vehicle mile traveled (VMT). Renewable electricity reduced GWP by 80-90% relative to U.S. average grid.

Shen, Xinyao [NETL Site Support Contractor, Nation↗

Thermodynamic analysis of alternate energy carriers, hydrogen and chemical heat pipes

Hydrogen and chemical heat pipes were proposed as methods of transporting energy from a primary energy source (nuclear, solar) to the user. In the chemical heat pipe system, primary energy is transformed into the energy of a reversible chemical reaction; the chemical species are then transmitted or stored until the energy is required. Analysis of thermochemical hydrogen schemes and chemical heat pipe systems on a second law efficiency or available work basis show that hydrogen is superior especially if the end use of the chemical heat pipe is electrical power.

Cox, K. E.↗

Hydrogen - The carrier of life

Hydrogen, and hydrogen compounds with oxygen, carbon, nitrogen, and phosphorus in construction of living systems

HYDROGEN COMPOUND↗

A hydrogen energy carrier. Volume 2: Systems analysis

A systems analysis of hydrogen as an energy carrier in the United States indicated that it is feasible to use hydrogen in all energy use areas, except some types of transportation. These use areas are industrial, residential and commercial, and electric power generation. Saturation concept and conservation concept forecasts of future total energy demands were made. Projected costs of producing hydrogen from coal or from nuclear heat combined with thermochemical decomposition of water are in the range $1.00 to $1.50 per million Btu of hydrogen produced. Other methods are estimated to be more costly. The use of hydrogen as a fuel will require the development of large-scale transmission and storage systems. A pipeline system similar to the existing natural gas pipeline system appears practical, if design factors are included to avoid hydrogen environment embrittlement of pipeline metals. Conclusions from the examination of the safety, legal, environmental, economic, political and societal aspects of hydrogen fuel are that a hydrogen energy carrier system would be compatible with American values and the existing energy system.

Savage, R. L.↗

A hydrogen energy carrier. Volume 1: Summary

The production, technology, transportation, and implementation of hydrogen into the energy system are discussed along with the fossil fuel cycle, hydrogen fuel cycle, and the demands for energy. The cost of hydrogen production by coal gasification; electrolysis by nuclear energy, and solar energy are presented. The legal aspects of a hydrogen economy are also discussed.

Savage, R. L.↗

Space Shuttle Trace Gas Analyzer

A Trace Gas Analyzer (TGA) with the ability to detect the presence of toxic contaminants in the Space Shuttle atmosphere within the subparts-per-million range is under development. The design is a modification of the miniaturized Gas Chromatograph-Mass Spectrometer (GCMS) developed for the Viking Mars Lander. An ambient air sample is injected onto the GC column from a constant volume sample loop and separated into individual compounds for identification by the MS. The GC-MS interface consists of an effluent divider and a silver-paladium separator, an electrochemical cell which removes more than 99.99% of the hydrogen carrier gas. The hydrogen is reclaimed and repressurized without affecting the separator efficiency, a feature which enables a considerable weight reduction in the carrier gas supply system.

Dencker, W.↗

Anodic Conversion of Cyclohexane, Methylcyclohexane, and 2-Propanol: Towards a Regenerable Liquid-Fed Fuel Cell

Liquid Organic Hydrogen Carriers (LOHCs) are promising for hydrogen and energy storage but require endothermic catalytic dehydrogenation. An alternative approach is a regenerable liquid-fed fuel cell which spontaneously converts an organic carrier from its hydrogen-rich to hydrogen-lean form while generating electrical power. The anodic electrooxidation of cyclohexane, methylcyclohexane and 2-propanol in a high temperature polybenzimidazole/phosphoric acid (PBI/PA) PEM fuel cell was investigated along with a quantitative analysis of reaction products. Cyclohexane and methylcyclohexane were predominantly converted to CO 2 with only a trace formation of the corresponding aromatic and cyclic olefin byproducts. This near-to-complete oxidation of the fuels is in sharp contrast to previous reports of a selective conversion of cyclohexane to benzene, with no CO 2 byproducts. In experiments with 2-propanol, acetone was produced, with diisopropylether, propylene and CO 2 as only minor side products. However, the extent of CO 2 formation greatly increased at higher current densities.

25 ENERGY STORAGE↗

Photo-Induced Hydrogen Production from Formic Acid Using a Palladium Catalyst

Liquid organic hydrogen carriers (LOHCs) are recognized as promising sustainable hydrogen (H 2 ) carriers due to their high volumetric capacity and ability to store H 2 at ambient conditions, eliminating the need for energy-intensive liquefaction or compression processes associated with H 2 or ammonia gas. One of the main current drawbacks, however, is LOHCs’ high energy demand for H 2 release. This work presents the photo-induced liberation of H 2 from formic acid (FA) as a liquid H 2 carrier, using visible light and well-established 5 wt% palladium nanoparticles supported over carbon (Pd/C). We show that low-power light-emitting diodes (LEDs) produced higher gas flow than their thermal baseline (35 °C), with 27.2 mL/min and 7.72 mL/min, respectively. Further, the rate of gas evolved with light intensity, catalyst loading, and the concentration of FA. Light-induced dehydrogenation shows similar deactivation as the known thermal mechanisms, such as the decreased Pd 2+ /Pd 0 ratio and Pd nanoparticle agglomeration. Hence, these observations suggest a photothermal mechanism, whereby the LED provides heat efficiently absorbed by the Pd/C catalyst and enhanced by Pd’s ability to absorb light, thereby driving the FA dehydrogenation reaction at ambient conditions.

08 HYDROGEN↗