Search NASA⌕ Search

SEARCH · Search NASA

Results for “injection region”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Spatial extent of the plasma injection region in the cusp-magnetosheath interface

Using data from the high-altitude plasma instrument onboard the DE 1 spacecraft, the perpendicular (to the magnetic field) extent of the region of ion injection into the cusp has been estimated by measuring the energy dispersion of the ion V-shaped signatures seen on energy-time spectrograms. Three different passes were chosen based on the clarity of the V-shaped ion signatures. These studies indicate that the injection region has a dimension perpendicular to the magnetic field in the range D = 1000-6000 km at a radial distance of about 10 earth radii, in good agreement with reported diameters of flux transfer events (FTEs). Similar measurement of the energy dispersion of an electron V-shaped signature observed on one pass has yielded a parallel extent of the plasma injection region in the range D(parallel) = 100-350 km. The results lead to the suggestion that the plasma within an FTE travels down the field line as the field line convects antisunward, and may subsequently be observed in the polar cusp as a V-shaped signature.

Menietti, J. D.↗

Dynamics of metastable contact soliton dissipative exchange flows in one-dimensional ferromagnetic channels

Dissipative exchange flows (DEFs) are large-amplitude boundary value solutions of ferromagnetic channels. In their low-injection limit, DEFs reduce to spin superfluids. However, in the strong injection limit, nonlinearities dominate close to the injection site and a soliton is formed; this solution has been termed a contact soliton dissipative exchange flow (CS-DEF). Here, in this work, we numerically investigate CS-DEF solutions in a moderate injection regime and a finite injection width. We find a solution where two metastable solitons coexist in the injection region. This solution is metastable in the sense that any perturbation to the system will eject one of the solitons out of the injection region. Moreover, soliton dynamics can be excited when two injection regions are separated by a certain distance. We find that the ensuing DEF between the solitons induces a steady-state dynamics in which metastable solitons are continually ejected and nucleated. Furthermore, and depending on the relative signs of the spin injections, the soliton dynamics possess a particular handedness and frequency related to the spin transfer torque delivered by the DEF. Our results provide insights into the transport of spin current by DEFs - where the interaction between DEFs and solitons suggests a mechanism for detaching contact-solitons from the injection boundary. Although this study focuses on the "nonlocal" interaction between solitons, it may lead to the investigation of new mechanisms for inserting solitons in a DEF, e.g., for discrete motion and transport of information over long distances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transpolar Pc1 Wave Ducting: Swarm, DMSP, and Ground Observations

Alfvén mode Pc1 waves undergo mode conversion to the fast mode due to induced Hall current in the ionosphere. The fast mode Pc1 waves are trapped and propagate across the magnetic field through the ionospheric waveguide. This process is called Pc1 wave ducting (PWD). Ducting is expected to be in any direction, but most of the existing literature investigated only PWDs toward the equator. In this paper, we report the rare observations of PWD propagating from sub-auroral latitudes and pervading the polar cap using Swarm satellites, ground magnetometers, and Defense Meteorological Satellite Program (DMSP) satellites. We first identify the injection region of Pc1 wave where localized broadband transverse waves, isolated aurora, and energetic proton precipitations are concurrently observed. Then, we compare ducting characteristics in the ionosphere between the two hemispheres. For the three events investigated here, PWDs in the Southern Hemisphere (SH) pervaded the polar cap while Pc1 waves in the Northern Hemisphere (NH) did not. This hemispheric asymmetry is attributed to the plasma density in the SH sufficient to form the Pc1 waveguide. However, a sharp plasma density gradient on the propagation path still interrupts the ducting even in higher plasma density (> 10 5 cm -3 ) regions. The observation of two intersecting Swarm satellites indicates the PWD is not only elongated meridionally, but also can have a significant zonal extent beyond that of the injection region.

Hyangpyo Kim↗

A simulation of the Cerro Hudson SO2 cloud

An isentropic trajectory model is used to simulate the evolution of the southern hemisphere SO2 cloud associated with the eruption of Cerro Hudson. By matching the parcel trajectories with total ozone mapping spectrometer SO2 retrievals, the principal stratospheric injection region is determined to be between 11 and 16 km in altitude. This region is characterized by weak wind shears and is located just poleward of the subtropical jet in the outer fringe of the stratospheric polar vortex. The lack of wind shear in the injection region explains the slow zonal dispersal of the SO2 cloud which was still clearly observed 19 days after the eruption. The trajectory model simulation of the SO2 cloud shows good agreement with observations for 7 days after the eruption. Using the potential vorticity and potential temperature estimates of the initial eruption cloud, the cloud position relative to the polar night jet is shown to be nearly fixed up to September 2, 1991, which was as long as the cloud was observed. This result suggests that the lower stratospheric polar and midlatitude regions are nearly isolated from each other during the late August period.

Schoeberl, Mark R.↗

Characteristics of heat exchange in the region of injection into a supersonic high-temperature flow

An experimental investigation of the local heat transfer coefficient distribution during gas injection into the supersonic-flow portion of a Laval nozzle is discussed. The controlling dimensionless parameters of the investigated process are presented in terms of a generalized relation for the maximum value of the heat transfer coefficient in the nozzle cross section behind the injection hole. Data on the heat transfer coefficient variation along the nozzle length as a function of gas injection rate are also presented, along with the heat transfer coefficient distribution over a cross section of the nozzle.

Bakirov, F. G.↗

Quantum cascade light emitting diodes based on type-2 quantum wells

The authors have demonstrated room-temperature CW operation of type-2 quantum cascade (QC) light emitting diodes at 4.2 (micro)m using InAs/InGaSb/InAlSb type-2 quantum wells. The type-2 QC configuration utilizes sequential multiple photon emissions in a staircase of coupled type-2 quantum wells. The device was grown by molecular beam epitaxy on a p-type GaSb substrate and was compared of 20 periods of active regions separated by digitally graded quantum well injection regions. The maximum average output power is about 250 (micro)W at 80 K, and 140 (micro)W at 300 K at a repetition rate of 1 kHz with a duty cycle of 50%.

Light Emitting Diodes↗

In situ observations of Io torus plasma

The physical properties of the Io plasma formation deduced from in situ observations are described. The torus plasma is characterized by spatially distinct regions with steep gradients in plasma parameters between them. The innermost region has a cool plasma which collapses toward the centrifugal equator and gives rise to a distinctive localized concentration of plasma well inside of Io's orbit. The next region has a warm plasma which includes the L-shell of Io and is the presumed injection region of the plasma. Other regions, known as the plasma ledge and ramp, are described. The changes in plasma characteristics are accounted for by centrifugally driven flux tube interchange diffusion to provide radial mass transport. The ramp is shown to result from impoundment of the plasma by the inner edge of the energetic particle population. It is also shown how the power required to excite the ultraviolet emissions of the torus and the Jovian aurora determines the rate at which new plasma is fed into the torus.

Sullivan, J. D.↗

Low and middle altitude cusp particle signatures for general magnetopause reconnection rate variations. 1: Theory

We present predictions of the signatures of magnetosheath particle precipitation (in the regions classified as open low-latitude boundary layer, cusp, mantle and polar cap) for periods when the interplanetary magnetic field has a southward component. These are made using the 'pulsating cusp' model of the effects of time-varying magnetic reconnection at the dayside magnetopause. Predictions are made for both low-altitude satellites in the topside ionosphere and for midaltitude spacecraft in the magnetosphere. Low-altitude cusp signatures, which show a continuous ion dispersion signature, reveal 'quasi-steady reconnection' (one limit of the pulsating cusp model), which persists for a period of at least 10 min. We estimate that 'quasi-steady' in this context corresponds to fluctuations in the reconnection rate of a factor of 2 or less. The other limit of the pulsating cusp model explains the instantaneous jumps in the precipitating ion spectrum that have been observed at low altitudes. Such jumps are produced by isolated pulses of reconnection: that is, they are separated by intervals when the reconnection rate is zero. These also generate convecting patches on the magnetopause in which the field lines thread the boundary via a rotational discontinuity separated by more extensive regions of tangential discontinuity. Predictions of the corresponding ion precipitation signatures seen by midaltitude spacecraft are presented. We resolve the apparent contradiction between estimates of the width of the injection region from midaltitude data and the concept of continuous entry of solar wind plasma along open field lines. In addition, we reevaluate the use of pitch angle-energy dispersion to estimate the injection distance.

Lockwood, M.↗

Combustion of hydrogen injected into a supersonic airstream (a guide to the HISS computer program)

A computer program based on a finite-difference, implicit numerical integration scheme is described for the prediction of hydrogen injected into a supersonic airstream at an angle ranging from normal to parallel to the airstream main flow direction. Results of calculations for flow and thermal property distributions were compared with 'cold flow data' taken by NASA/Langley and show excellent correlation. Typical results for equilibrium combustion are presented and exhibit qualitatively plausible behavior. Computer time required for a given case is approximately one minute on a CDC 7600. A discussion of the assumption of parabolic flow in the injection region is given which demonstrates that improvement in calculation in this region could be obtained by a partially-parabolic procedure which has been developed. It is concluded that the technique described provides an efficient and reliable means for analyzing hydrogen injection into supersonic airstreams and the subsequent combustion.

Dyer, D. F.↗

Electron transport and the magnetic field in the Crab Nebula

Observational data obtained at radio, optical, and X-ray frequencies on the size of the emission region in the Crab Nebula are used to examine various energy-transport models. It is shown that the data cannot be fitted by diffusion models, even when the energy-injection region is extended. A more favorable comparison is made with an extended source model in which bulk motion is the transport mechanism. Assuming a point source of electrons and a uniform nebular magnetic field, a perpendicular magnetic-field component of less than 0.0008 gauss is determined. Combining this with the lower limit obtained from gamma-ray observations, a perpendicular field component of between 0.0005 and 0.0008 gauss is obtained. A break in the size dependence is predicted at about 12 microns and 45 keV. Above 45 keV, the size should decrease as the inverse square root of proton energy.

Wolff, R. S.↗

A tunable coherent CO2 lidar for measurements of atmospheric aerosol backscatter and attenuation

A coherent laser radar system using a grating-tunable, injection-locked TEA-CO2 transmitter is being used to measure the altitude dependence of atmospheric aerosol backscatter and attenuation at a variety of CO2 laser wavelengths in the 9-11 micron region. Injection control of the TEA-CO2 laser allows one to obtain Single-Longitudinal-Mode (SLM) pulses which will follow the frequency of the injected radiation if the TEA laser cavity length is adjusted so that a cavity resonance is in proximity with the injected signal frequency, and if various additional conditions are satisfied. Requirements for generation of SLM pulses in this manner from a TEA CO2 laser with an unstable resonator cavity will be discussed. Procedures used for quantitative range-gated measurements of aerosol backscatter and attenuation will also be discussed.

Menzies, R. T.↗

Combustion of hydrogen injected into a supersonic airstream (the SHIP computer program)

The mathematical and physical basis of the SHIP computer program which embodies a finite-difference, implicit numerical procedure for the computation of hydrogen injected into a supersonic airstream at an angle ranging from normal to parallel to the airstream main flow direction is described. The physical hypotheses built into the program include: a two-equation turbulence model, and a chemical equilibrium model for the hydrogen-oxygen reaction. Typical results for equilibrium combustion are presented and exhibit qualitatively plausible behavior. The computer time required for a given case is approximately 1 minute on a CDC 7600 machine. A discussion of the assumption of parabolic flow in the injection region is given which suggests that improvement in calculation in this region could be obtained by use of the partially parabolic procedure of Pratap and Spalding. It is concluded that the technique described herein provides the basis for an efficient and reliable means for predicting the effects of hydrogen injection into supersonic airstreams and of its subsequent combustion.

Markatos, N. C.↗

Auroral morphology of the midday oval

Auroral displays in the noon sector were examined by using hundreds of Defense Meteorological Satellite Program auroral images, taken over the southern polar region in austral winters, in order to determine the morphology. The auroral displays in the midday part of the auroral oval can be grouped into five characteristic types, depending on the geomagnetic activity and the Bz component of the interplanetary magnetic field. An important characteristic is the clear disconnection in appearance between the noonside and the nightside discrete auroras. Also, there is the lack of correlation between the concurrent nightside substorm activity and midday discrete auroral activity. Thus, the occurrence of bright, discrete auroras in the midday oval may be caused by the local injection of the magnetosheath plasma into the dayside boundary layer. The observed discontinuity of discrete auroras between the dayside and the nightside ovals is consistent with the existence of two separated major injection regions along the auroral oval: the dayside cusp and the nightside plasma sheet.

Meng, C.-I.↗

Self-stabilizing exchange-mediated spin transport

We report that long-range spin transport in magnetic systems can be achieved by means of exchange-mediated spin textures with robust topological winding, a phenomenon referred to as spin superfluidity. Its experimental signatures have been discussed in antiferromagnets, which are nearly free of dipolar interaction. However, in ferromagnets, which possess non-negligible dipole fields, realization of such spin transport has remained a challenge. Using micromagnetic simulations, we investigate coherent exchange-mediated spin transport in extended thin ferromagnetic films. We uncover a two-fluid state in which the long-range spin transport by spin textures coexists with spin waves, as well as a soliton-screened spin transport regime at high spin injection biases. Both states are associated with distinct spin texture reconstructions near the spin injection region and sustain spin transport over large distances.

36 MATERIALS SCIENCE↗

Subfemtosecond Wakefield Injector and Accelerator Based on an Undulating Plasma Bubble Controlled by a Laser Phase

Here, we demonstrate that a long-propagating plasma bubble executing undulatory motion can be produced in the wake of two copropagating laser pulses: a near-single-cycle injector and a multicycle driver. When the undulation amplitude exceeds the analytically derived threshold, highly localized injections of plasma electrons into the bubble are followed by their long-distance acceleration. While the locations of the injection regions are controlled by the carrier-envelope phase (CEP) of the injector pulse, the monoenergetic spectrum of the accelerated subfemtosecond high-charge electron bunches is shown to be nearly CEP independent.

43 PARTICLE ACCELERATORS↗

Reacting viscous-shock-layer solutions with multicomponent diffusion and mass injection

Numerical solutions of the viscous-shock-layer equation where the chemistry is treated as being either frozen, equilibrium, or nonequilibrium are presented. Also the effects of the diffusion model, surface catalysis, and mass injection on surface transport and flow parameters are considered. The flow is treated as a mixture of five inert and thermally perfect species. The viscous-shock-layer equations are solved by using an implicit-difference scheme. All calculations are for hyperboloids with included angles of 20 and 45. The flight conditions are those for various altitudes and velocities in the earth's atmosphere. Data are presented to show the effects of the chemical models; diffusion models; surface catalysis; and mass injection of air on heat transfer; skin friction; shock standoff distance; wall pressure distribution; and tangential velocity, temperature, and species profiles. The results show that an equilibrium analysis can substantially overpredict the heat-transfer rates for flow conditions experienced by earth-orbital entry vehicles. Moreover, at such conditions surface catalysis significantly influences heat-transfer and flow-field properties. If a binary rather than a multicomponent diffusion model is assumed, negligible errors in most flow properties result. Quantitative results are presented that show the effect of mass injection on flow properties within and downstream of the injection region.

Moss, J. N.↗

ATS-5 observations of plasma sheet particles before the expansion-phase onset, appendix C.

Behavior of the plasma sheet around its earthward edge during substorms was studied by using high resolution (every 2.6 sec) measurements of proton and electron fluxes by ATS-5. In the injection region near midnight the flux increase at the expansion-phase onset is shown to lag behind the onset of the low-latitude positive bay by several minutes. Depending upon the case, before the above increase (1) the flux stays at a constant level, (2) it gradually increases for some tens of minutes, or (3) it briefly drops to a low level. Difference in the position of the satellite relative to the earthward edge and to the high-latitude boundary of the plasma sheet is suggested as a cause of the above difference in flux variations during the growth phase of substorms. Magnetograms and tables (data) are shown.

Fujii, K.↗

Modeling of three-dimensional mixing and reacting ducted flows

A computer code based on a finite-element solution algorithm is developed to perform an analytical investigation on the turbulent mixing and reaction of hydrogen jets injected from multiple orifices transverse and parallel to a supersonic airstream. A laser optical cavity flow field was also analyzed to demonstrate the generality of the proposed model. Computational results provide a three-dimensional description of velocity, temperature, and species-concentration fields downstream of injection. Major conclusions are that the analysis has immediate utility in evaluating the mixing effectiveness of transverse H2 injection data since it has been tested in its ability to model this type of data and that turbulent mixing length theory, constant effective Prandtl number, and a Lewis number of unity provide reasonable agreement with transverse H2 injection data downstream of the near-injection region. Efforts are presently being directed toward using the code in modeling laser and scramjet data for a wide range of flow conditions.

Zelazny, S. W.↗