Title: Benchmarking of High-performance Low-temperature Plasma Particle-in-cell Codes for Modeling Magnetized Plasmas
Understandinrelationships between magnetic field and plasma conditions
Magnetic nozzles, particle-in-cell↗
SEARCH · Search NASA
Results for “low-temperature performance”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Humins-Derived Hard Carbon as a Low-Cost Material for Sodium-Ion Battery Anodes
The growing demand for sodium-ion batteries (SIBs) in grid storage underscores the need for electrode materials that balance performance and cost, including sustainable and robust carbon sources. The equitable and abundant distribution of materials for SIBs, along with their superior low-temperature performance, safety, and fast-charging capability, further distinguishes them from lithium-ion batteries (LIBs). Hard carbon (HC) is the state-of-the-art anode for SIBs, but current commercial HC production is localized mostly to one region of the world, raising concerns about supply chain vulnerability, critical material dependency, and environmental aspects. Here, the first demonstration of humins, an abundant biorefinery byproduct, as a precursor for HC anodes for sodium-ion storage is reported. Humins were carbonized at 1100 degrees C-1300 degrees C, and the resulting materials were subjected to comprehensive materials and electrochemical characterization. Among the temperatures studied, humins-derived hard carbon synthesized at 1200 degrees C delivers an initial reversible capacity 270mA h g-1 , with stable cycling performance up to 500 cycles and excellent rate capability, representing the optimal performance. This study establishes humins as a promising and low-cost carbon source that provides a route to mitigate supply chain risks and valorizes an underutilized biorefinery waste stream for high-performance SIB anodes.
25 ENERGY STORAGE↗
Experimental Evaluation of a High-Performance Cold-Climate Heat Pump Using Tandem Vapor-Injection Compressors
A high-performance cold-climate heat pump (CCHP) was developed and experimentally validated through comprehensive laboratory and field testing. The system utilized two equal-size tandem vapor-injection (VI) compressors with an inter-stage flash tank to improve efficiency and capacity retention under subfreezing conditions. Laboratory testing was conducted on a 3-ton prototype in a controlled environmental chamber equipped with calibrated thermocouples, refrigerant-side mass flow and pressure transducers, and precision airflow measurement for energy balance verification. The prototype achieved heating coefficients of performance (COPs) of 4.4 at 47 °F, 3.1 at 17 °F, and 2.0 at –13 °F, while maintaining 88% of its rated heating capacity at –13°F. These results confirm strong low-temperature performance and indicate the potential for significant reductions in electric resistance backup use. A field prototype was installed and monitored in a residential building in Fairbanks, Alaska, during a heating season. Instrumentation included real-time power, temperature, and refrigerant state measurements to evaluate performance under dynamic outdoor conditions. The heat pump operated reliably down to –30 °F, delivering 75% of its rated heating capacity with a COP of 1.8, while maintaining stable operation, effective defrost control, and indoor comfort without auxiliary heating. The combined laboratory and field results demonstrate that the tandem VI compressor configuration provides a practical and energy-efficient approach for residential heat pumps designed for cold and very cold climate regions.
Hu, Yifeng [ORNL] (ORCID:0000000242875185)↗
Cobalt-Free Lithium and Manganese Rich Cathodes for Electric Vehicle Applications: Influence of Inherent Properties on Temperature-Dependent Performance
Lithium- and manganese-rich (LMR) oxides are attractive options as next-generation, earth-abundant cathodes. Despite inherent properties that result in less-than-ideal performance, advancements in this class of cathodes toward commercialization have been steady. Herein, we report a benchmark study on the influence these inherent properties exert on the discharge rate of Co-free, LMR//graphite (Gr) cells as a function of temperature. Because low-temperature performance is an essential consideration in the design of electric vehicle cells, understanding the limitations of current LMR systems is essential in understanding their current applicability as well as strategies for improvement. This work identifies two major limitations in the rate performance of LMR//Gr cells and suggests several areas of focus where practical strategies may provide improvements.
25 ENERGY STORAGE↗
Jumpstart Opportunities to Unleash Leadership in Energy Storage (JOULES)
Current-generation Li-ion batteries with cobalt- and nickel-containing cathodes and graphite anodes are approaching performance and cost limits. In this program, 24M Technologies, Inc. (24M) is teaming with the Massachusetts Institute of Technology (MIT) and University of Michigan (UM) to develop low cost and fast charging sodium metal batteries with good low-temperature performance and high energy density, building upon previous work performed under ARPA-E programs. Key achievements include optimization of solid electrolyte and anode current collector, optimized cathode active materials, development of high-performance electrolyte formulations, and integration of these components into full cells. The cell design incorporates (1) an ultra-thick cathode (>9 mAh/cm 2 ) comprising advanced cobalt-free, sodium cathode active material, (2) advanced fast-charging electrolyte (up to 12 mS/cm) developed using machine learning and automated high-throughput screening technology by UM, and (3) ceramic modified separator that enable smooth Na transport and deposition, developed at MIT, enabling a high-energy density anode-free configuration and maximizing the energy density of sodium batteries. The team has successfully combined these approaches to sodium chemistry and paved the way to meeting the fast-charging, high-energy density, and low-cost requirements of next-generation drone, electric vertical take-off and -landing, and electric vehicle batteries. Performance for anode-free sodium cells developed under this program is more powerful than the commercial Li-ion batteries. The final deliverable cell design has achieved over 300 Wh/kg and volumetric energy density above 800 Wh/L (Table 1). Additionally, the team has achieved over (1) a lifetime of 340 cycles, (2) 80% capacity retention at -20 °C (compared 25 °C), and (3) the ability to fast charge to 80% SOC in 20 minutes.
25 ENERGY STORAGE↗
Vehicle Technologies Program: Energy Storage R&D (2008 Annual Progress Report)
One of the primary objectives of the Energy Storage effort is the development of durable and affordable advanced batteries (and ultracapacitors) for use in a full range of vehicle applications, from start/stop to full-power HEVs, EVs, and PHEVs. The battery technology development activity spans three areas: system development of full battery systems; benchmark testing of emerging technologies in order to remain abreast of the latest industry developments; and Small Business Innovative Research (SBIR) to fund early-stage R&D for small businesses/entrepreneurs.
25 ENERGY STORAGE↗
Identifying materials-level sources of performance variation in superconducting transmon qubits
The Superconducting Quantum Materials and Systems Center, a U. S. Department of Energy National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various non-destructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T1 lifetime across different qubits on the same chip. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.
Murthy, Akshay A. [Fermilab] (ORCID:00000001767768↗
Water-Fed, Photovoltaic-Driven Anion-Exchange Membrane Water Electrolysis for Solar Hydrogen Production
Direct coupled photovoltaic (PV)-electrolysis is a promising approach for low-cost hydrogen production, avoiding the need for separate electricity generation. Without solar concentration, the operating current densities of a PV-electrolyzer are small, and low capital costs are needed to reach hydrogen production cost targets (<$2/kg). Anion-exchange membrane (AEM) electrolyzers could be well-suited for this application due to their ability to use platinum group metal (PGM)-free catalysts and operate without supporting electrolytes, but a water-fed PV-AEM system has not yet been demonstrated. In this work, the performance of two AEM electrolyzer designs under pure-water, low-temperature, and diurnal-cycling conditions was evaluated. A simple PV-electrolyzer system design with direct electric coupling to a commercial 84 cm2 Si mini module and passive heating and water flow to the electrolyzer was used for on-sun testing in October 2025. The best-performing PV-AEM system achieved an average solar-to-hydrogen (STH) efficiency of 6.6% and a production rate of 15 mg/kWh/m2 of solar irradiance over 11 days. Minimal electrolyzer corrosion was observed, with no loss in efficiency over the diurnal cycles. While highlighting areas for improved electrolyzer and system design, this work is a proof of concept for distributed hydrogen production using inexpensive and abundant materials.
08 HYDROGEN↗
Marine algae growth and carbon capture augmentation by antioxidant nanozymes
Large scale commercial cultivation of microalgae year-round is limited by seasonal stress conditions. The rapid growth and high CO 2 capture of the marine microalga Picochlorum celeri is largely inhibited under winter stress conditions of low temperature and high light. Herein, we demonstrated a nanotechnology approach to enhance the biomass productivity and CO 2 capture of P. celeri under abiotic stress by interfacing with antioxidant cerium oxide nanozymes (nanoceria). Antioxidant nanoceria catalytically scavenged reactive oxygen species (ROS) generated under stress conditions, reducing damage to the microalgae photosynthetic machinery in chloroplasts. Negatively charged poly-acrylic acid-coated nanoceria (PNC, 10 μM) were biocompatible in microalgae cells and colocalized with chloroplasts. In contrast, positively charged aminated nanoceria (ANC) resulted in microalgae aggregation (>50 μM) and were toxic at all concentrations tested (≥10 μM). PNC reduction of ROS levels in microalgae (78%) and superoxide levels (26%), enhanced microalgae growth (65%), photosynthetic performance (130%), and CO 2 uptake rate (380%) under low-temperature stress (15 °C) and high light (500 μmol/m 2 /s PAR) stress relative to controls without nanoceria. Nanoceria augmentation of microalgae provides a rapid and facile technology to increase algae CO 2 capture and biomass under stress conditions.
09 BIOMASS FUELS↗
Hybrid Cooling and Water Treatment for Resilient, Water-Self-Sufficient Data Centers
The continued growth of data center infrastructure is intensifying demand for freshwater resources, particularly in water-stressed regions, and is increasingly limiting sustainable capacity expansion. This work investigates a conceptual hybrid system that integrates freeze desalination with ultrasonic-assisted ice separation to enable on-site production of pure water from diverse sources, including seawater, brackish groundwater, and reclaimed industrial or agricultural wastewater. Simultaneously, the system produces low-temperature cooling streams that enhance heat removal in high power density computing environments. A process-level thermodynamic analysis is performed across a range of boundary and operating conditions, including variations in feed concentration, freezing temperature, and mass flow rate. The results are presented as performance curves relating feedwater concentration and target purified water output to the corresponding intake flow requirements, enabling estimation of source water demand per unit of Information Technology Equipment (ITE) energy consumption (kWh) across varying data center scales and operational scenarios. The corresponding electrical energy consumption for integrated cooling and water treatment is also evaluated as a function of system operating parameters and target water production levels. These results provide a basis for evaluating system feasibility across different conditions and for identifying parameter ranges in which integrated water treatment and cooling improve resource efficiency, thermal performance, and operational flexibility in data centers.
Elhefny, Aly [ORNL] (ORCID:0000000284907923)↗
Improved high-gradient performance for medium-velocity superconducting half-wave resonators: Surface preparation and trapped flux mitigation
A development effort to improve the performance of superconducting radio-frequency half-wave resonators (SRF HWRs) is underway at the Facility for Rare Isotope Beams (FRIB), where 220 such resonators are in operation. Our goal was to achieve an intrinsic quality factor (𝑄 0 ) of ≥ 2 × 10 10 at an accelerating gradient (𝐸 acc ) of 12 MV/m. FRIB production resonators were prepared with buffered chemical polishing. First trials of electropolishing (EP) and post-EP low-temperature baking of FRIB HWRs allowed us to reach higher gradient (15 MV/m, limited by quench) with a higher quality factor at high gradient, but 𝑄 0 was still below our goal. Trapped magnetic flux during the Dewar test was found to be a source of 𝑄 0 reduction. Three strategies were used to reduce the trapped flux: (i) adding a local magnetic shield (LMGS) to supplement the “global” magnetic shield around the Dewar for reduction of the ambient magnetic field; (ii) performing a “uniform cooldown” (UC) to reduce the thermoelectric currents; and (iii) using a compensation coil to further reduce the ambient field with active field cancellation (AFC). The LMGS improved the 𝑄 0 , but not enough to reach our goal. With UC and AFC, we exceeded our goal, reaching 𝑄 0 = 2.8 ×10 10 at 𝐸 acc = 12 MV/m.
Cryogenics & vacuum technology↗
Excitation spectrum and low-temperature magnetism in the disordered defect-fluorite Ho2Zr2O7
In this work, we report on the thermomagnetic characterization and crystalline-electric field (CEF) energy scheme of the disordered defect-fluorite Ho2Zr2O7. This structural phase is distinguished by the coexistence of magnetic frustration and extensive disorder, with Ho3+ and Zr4+ sharing randomly the same 4𝑎 site with even 50% occupancy, and an average 1/8 oxygen vacancy per unit cell. AC magnetic susceptibility measurements performed on powder samples down to 0.5 K revealed signs of slowing spin dynamics without glassy behavior, including a frequency dependent peak at ∼1K. Yet, no evidence for long-range magnetic order is found down to 200 mK in the specific heat. Inelastic neutron scattering measurements show a weak, low-lying CEF excitation around 2 meV, accompanied by a broad level centered at 60 meV. To fit our observations, we propose an approach to account for structural disorder in the crystal-field splitting of the non-Kramers Ho3+. Our model provides an explanation to the broadening of the high-energy, single-ion excitations and suggests that the zirconate ground-state wavefunction has zero magnetic moment. Through the breaking of local symmetry, structural disorder enables the magnetic response observed in Ho2Zr2O7, allowing the mixing of low-lying states at finite temperatures. Finally, we show that this scenario is in good agreement with the bulk properties reported in this work.
Gardner, Jason [ORNL] (ORCID:0000000278234072)↗
Quantifying the Impact of Metal Population Distribution in MFI-Supported Mo Catalysts for Methane Dehydroaromatization
Precise evaluation of intrinsic kinetic behavior in Mo/MFI catalysts for methane dehydroaromatization (MDA) is confounded by variations in Mo dispersion and speciation, which are influenced by metal loading and zeolite acidity. This work advances the utility of H 2 -temperature programmed reduction (H 2 -TPR) for characterizing Mo/MFI catalysts by enabling quantitative comparison of MoO x populations distinguished by reduction behavior and linked to initial catalytic performance. A comprehensive H 2 reduction pathway is established through systematic H 2 - TPR studies varying catalyst composition (1–10 wt % Mo, Si/Al = 15, 40, ∞), supplemented by UV-Raman spectroscopy, X-ray powder diffraction, N 2 physisorption, NH 3 -TPD, and advanced spectroscopic analysis (in situ XAS with principal component analysis/multivariate curve resolution—alternating least squares). Two low-temperature H 2 -TPR regions capture distinct Mo populations undergoing initial Mo(VI)→Mo(IV) reduction: a lower-temperature population (Mo-RI) associated primarily with highly dispersed, anchored MoO x species expected to predominantly reside within MFI channels, and a higher-temperature population (Mo-RII) corresponding to a broader set of MoO x species that becomes increasingly bulk-like/extrazeolitic at higher Mo loading. Quantification of these populations provides practical, kinetically relevant descriptors for comparing initial MDA rates across catalysts with varying Mo loading, Si/Al ratio, and MoO x heterogeneity. Application of lower-temperature Mo-RI estimates to kinetic measurements reveals a minimum threshold of ∼0.12 × 10 –3 mol Mo-RI/g cat , above which initial forward benzene rates normalized to this population converge despite differences in metal loading and zeolite Brønsted acidity. This threshold coincides with a transition toward a common C 2 -mediated benzene-forming regime, as indicated by approach-to-equilibrium analysis of methane-to-ethane, ethane-to-ethylene, and ethylene-to-benzene reaction steps. Above this threshold, normalized initial benzene rates are nearly invariant with increasing Mo-RII/Mo-RI population ratio, indicating that excess Mo-RII populations, including bulk-like/extrazeolitic MoO x domains present at higher loading, do not measurably suppress benzene formation associated with anchored and mostly channel-confined Mo population under the initial-rate conditions examined.
Mo/MFI↗
Direct Observation of Elusive (DTBM‐SEGPHOS)CuH Monomer Enables Mechanistic Insights Into Hydrocupration, Aggregation, and Dynamics of Alkene Functionalization Catalysis
The bulky diphosphine DTBM-SEGPHOS is widely employed in CuH-catalyzed transformations as it provides remarkably active catalyst systems. The transient (DTBM-SEGPHOS)CuH monomer (LCuH) is the often-invoked active species. However, its instability has prevented spectroscopic characterization and mechanistic elucidation, hindering mechanistic understanding. We report low-temperature NMR spectroscopic characterization of LCuH, enabling quantitative kinetic analysis of the stoichiometric hydrocupration and catalytic hydroboration of cyclopentene, as well as the structural identification of two CuH clusters. LCuH inserts cyclopentene at −43°C, reaffirming its high reactivity toward olefins. LCuH deactivates to form L 2 Cu 3 H 3 and L 2 Cu 4 H 4 clusters, in which LCuH dimerization initiates aggregation. Kinetic analysis of reactions of unactivated alkenes indicates that competing on-cycle alkene hydrocupration and LCuH dimerization impact performance, as catalyst deactivation and turnover occur on comparable timescales. Structure–activity analysis using atomistic simulations shows that the steric profile of DTBM-SEGPHOS increases the CuH dimerization barrier by ∼7.7 kcal mol−1 compared to that of SEGPHOS, rationalizing the unique ability of DTBM-SEGPHOS to stabilize a reactive monomer for hydrocupration of broader alkene substrates. These findings illustrate the fundamental design principle that steric control of aggregation governs CuH catalyst performance, explaining both the exceptional activity of (DTBM-SEGPHOS)CuH and the limitations imposed by competing deactivation.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Enhancing photoionization rate calculations in low-temperature plasmas using spectral methods
Photoionization plays a central role in the development of streamer discharges and other non-equilibrium plasma phenomena. It creates seed electrons, which are essential for positive streamer propagation, allowing the ionization front to move forward. Because of this, accurate modeling of photoionization is very important for predicting streamer behavior and plasma evolution. The photoionization process in air (N 2 – O 2 mixture) is often described by the Zheleznyak model (1982). This model is usually solved through Helmholtz-type equations that approximate the Zheleznyak photoionization model (Zheleznyak et al. 1982) as Partial Differential Equations (PDEs). Conventional numerical methods, such as the Finite Difference Method (FDM) or Finite Volume Method (FVM), are widely used to solve these equations. Although they are prevalent, the computational cost of these methods due to their need for matrix operations and iterative solver is demanding. To address this challenge, this work develops a spectral solver based on the Fast Fourier Transform (FFT) combined with Discrete Cosine Transform (DCT) and Discrete Sine Transform (DST) to calculate the photoionization rate efficiently in an axisymmetric cylindrical domain. This method naturally satisfies the boundary conditions used in the model and converts the PDE into algebraic ones in spectral space. Thus, avoids the need for iterative matrix solvers. When compared with FDM results, it is demonstrated that the new solver not only maintains accuracy, but also reduces the computational cost, showing a performance increase of approximately 100 compared to FDM over a wide range of problem sizes. The method is parallelized using Message Passing Interface (MPI) and has been integrated into a fluid plasma model for streamer simulation. Here, this FFT-based approach provides a fast and reliable alternative for calculating photoionization in fluid models, helping large-scale plasma simulations run faster and efficiently, and allows higher-resolution simulation without extra computational cost.
Axisymmetric system↗
Low-Temperature Gold Deposition Improves CdTe Back Contacts
Improved back contacts can benefit CdTe photovoltaics (PV). In this work, Cd(Se,Te) PV absorbers are cooled during Au evaporation to thermally quench a chemical reaction occurring between gold and CdTe and the generation of a reaction product that lowers device efficiency. Reducing substrate temperature enhances PV power conversion efficiency via open-circuit voltage and fill factor increases. X-ray photoelectron spectroscopy (XPS) reveals that lower temperature also reduces chemical perturbations of the CdTe, potentially linking back contact formation to a CdTe degradation product that hinders PV performance. Comparing reaction enthalpy and substrate heating energy shows that back contact formation by sputtering elemental metals onto ZnTe may exhibit a degradation pathway analogous to that of CdTe/Au reported here. Degradation-diminishing contact formation processes are therefore of general interest for optoelectronic devices, and the reduced substrate temperature in this study is one example.
14 SOLAR ENERGY↗
Insights into Native Single-Atom Electrocatalyst Site Structures
Single-atom electrocatalysts consisting of metal atoms embedded in a carbon matrix are promising next-generation catalysts for green hydrogen production and utilization, CO2 reduction, low-temperature CO oxidation, ammonia production, plastic decomposition, and electrochemical energy storage. The origins of activity and stability for the single-atom sites are still debatable, however, because of constrained insights into their local structure resulting from idealized models and experiments derived from a large number of individual sites. Insights into structural variations around single atomic sites are therefore critical for the continued development of these next-generation catalysts. While electron microscopy commonly provides atomic-scale information about these materials, the beam sensitivity of individual sites makes structural determination by conventional low-voltage (60 keV) techniques challenging. Here, we introduce ultralow-voltage electron ptychography, performed at 30 keV, that enables determination of the lattice structure around individual metal sites in a well-defined single-atom electrocatalyst system while essentially eliminating knock-on structural modifications. Pairing these atomic-scale, site-specific measurements with computational methods will broaden our understanding of the activity and stability of these materials, which will accelerate the development of the next generation of catalysts.
Zachman, Michael [ORNL] (ORCID:0000000319101357)↗
Design and Validation of a Cryogenic Dilatometer
This project focuses on the design and development of a cryogenic dilatometer capable of measuring the thermal expansion of materials at extremely low temperatures. Understanding how materials change dimension with temperature is critical for applications involving cryogenic environments, particularly laminated systems housing superconducting magnets, where small dimensional changes can significantly affect performance and reliability. To address this, a dilatometer system was designed to operate within a liquid nitrogen environment while accurately measuring displacements caused by thermal contraction. The purpose of this device is to determine the coefficient of thermal expansion (CTE) of a material. The design process involved defining functional requirements, developing mechanical and thermal concepts for the measurement apparatus, selecting appropriate materials compatible with cryogenic temperatures, and integrating sensors capable of detecting small dimensional changes. The resulting system aims to provide a practical and repeatable method for evaluating material thermal expansion at cryogenic temperatures, supporting research into composite use in superconducting applications that require accurate characterization of material behavior in low-temperature environments.
Schmitt, Nicholas [Northern Illinois U.]↗