Search NASA⌕ Search

SEARCH · Search NASA

Results for “melt reprocessing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Circular Reprocessing of Thermoset Polyurethane Foams

Thermoset polyurethane (PU) foams are widely used in industrial applications, but they cannot be recycled by conventional melt reprocessing because of their cross-linked structures. The introduction of carbamate exchange catalysts converts thermoset PU into covalent adaptable networks (CANs), which are amenable to reprocessing at elevated temperatures. However, this approach has produced solid PU films, which have fewer uses and lower commercial demand. In this work, simultaneous reprocessing and refoaming of thermoset PU foams is demonstrated by leveraging the melt-processability of PU CANs and allowing cell growth by gas generation in a twin-screw extruder. The optimal operating temperature of the refoaming process is determined through chemical, thermal, and structural analysis of PU foam extrudates. The foam-to-foam extrusion process produces controllable, continuous, and uniform foam structures, as characterized by cell diameter and cell number density. Low-density PU foams are obtained through a process simulating injection molding. The compression properties of reprocessed PU foam are compared with as-synthesized PU foam to demonstrate efficacy of the refoaming processes. These results demonstrate that PU foams can be prepared through recycling while maintaining microstructural and chemical integrity. In the future, this strategy may be applied to thermoset PU foams of various chemical compositions and shows promise for scalability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Chemically and mechanically recyclable polyester-based multilayer plastics

Approximately 100 million tons of multilayered plastics (MLPs) are produced each year worldwide but are not recycled due to their complex structure. Here, this work aims to design polyester-based multilayer plastics (80–100 % polyester) that provide barrier performance comparable to typical 9–12-layer commercial MLPs, while also enabling both chemical recycling (back to parent monomer) and mechanical recycling (grind-and-melt reprocessing). Such dual recyclability is not achievable with non-polyester multilayers, such as all-polyolefin systems. Furthermore, we emphasize how the multilayer architecture was tailored to balance barrier properties, mechanical integrity, and end-of-life recyclability for both flexible and rigid packaging applications. Two main categories of polyester-based MLPs are reported; in the first type, poly(butylene adipate-co-terephthalate) (PBAT)-70 % polyglycolic acid (PGA) is used as middle barrier layer, while in second type, middle barrier layer is Ethylene-vinyl alcohol (EVOH) copolymers. Polyethylene terephthalate (PET) was used as a structural layer, while either PBAT or poly(butylene succinate) (PBS) was used to enable thermal sealing and serve as the product contact layer. These MLPs are recycled by both chemical and mechanical recycling processes. Techno-economic analysis (TEA) shows that MLPs incorporating EVOH as barrier layer have similar or lower selling costs (0.32 $\$$/m 2 ) than commercial MLPs. Life cycle assessment (LCA) indicates EVOH-based MLPs have a lower carbon footprint and lower energy consumption relative to commercial MLP benchmarks. This work offers simplified MLPs that are easy to manufacture and ready to recycle, which will significantly reduce environmental impact of MLP packaging while also providing a cost-effective and practical solution for industry.

Barrier properties↗
DOE OSTI2022

Promising Method of Sm–Co Magnet Reprocessing in Alkali Chloride Melts

Developing new, efficient methods for samarium and cobalt recovery from scraps/rejects and swarf at Sm–Co magnet manufacturing sites during shaping and finishing is an important task in terms of meeting their growing demand. In this work, the reaction of oxygen with a solution of samarium and cobalt chlorides in a LiCl–KCl eutectic melt was studied at 400–600 °C to explore possible methods for the separation and recovery of samarium and cobalt from these waste products. The pyrochemical reaction resulted in the formation and precipitation of samarium oxychloride, while the cobalt remained in the melt in a soluble chloride form. The effect of temperature and the amount of oxygen passed through the melt (oxygen-to-samarium molar ratio) on the course of the reaction were studied. Kinetic parameters of the oxygen with samarium chloride reaction were determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2013

Advanced Exploration Systems (AES) Logistics Reduction and Repurposing Project: Advanced Clothing Ground Study Final Report

All human space missions require significant logistical mass and volume that will become an excessive burden for long duration missions beyond low Earth orbit. The goal of the Advanced Exploration Systems (AES) Logistics Reduction & Repurposing (LRR) project is to bring new ideas and technologies that will enable human presence in farther regions of space. The LRR project has five tasks: 1) Advanced Clothing System (ACS) to reduce clothing mass and volume, 2) Logistics to Living (L2L) to repurpose existing cargo, 3) Heat Melt Compactor (HMC) to reprocess materials in space, 4) Trash to Gas (TTG) to extract useful gases from trash, and 5) Systems Engineering and Integration (SE&I) to integrate these logistical components. The current International Space Station (ISS) crew wardrobe has already evolved not only to reduce some of the logistical burden but also to address crew preference. The ACS task is to find ways to further reduce this logistical burden while examining human response to different types of clothes. The ACS task has been broken into a series of studies on length of wear of various garments: 1) three small studies conducted through other NASA projects (MMSEV, DSH, HI-SEAS) focusing on length of wear of garments treated with an antimicrobial finish; 2) a ground study, which is the subject of this report, addressing both length of wear and subject perception of various types of garments worn during aerobic exercise; and 3) an ISS study replicating the ground study, and including every day clothing to collect information on perception in reduced gravity in which humans experience physiological changes. The goal of the ground study is first to measure how long people can wear the same exercise garment, depending on the type of fabric and the presence of antimicrobial treatment, and second to learn why. Human factors considerations included in the study consist of the Institutional Review Board approval, test protocol and participants' training, and a web-based data collection questionnaire. Cardiovascular exercise was chosen as the activity in this experiment for its profuse sweating effect and because it is considered a more severe treatment applied to the clothes than every-day usage. Study garments were exercise T-shirts and shorts purchased from various vendors. Fabric construction, fabric composition, and finishing treatment were defined as the key variables. The study was divided into three balanced experiments: a cotton-polyester-wool (CPW) T-shirts study with 61 participants, a polyester-modacrylic-polyester/cocona (PMC) T-shirts study with 40 participants, and a shorts study with 70 participants. In the CPW study, the T-shirts were made of 100% cotton, or of 100% polyester or of 100% wool, and categorized into open and tight knit constructions. In the PMC study, the T-shirts were made of 100% polyester, or of 82% modacrylic, or of 95% polyester with 5% cocona fiber, without construction distinction. The shorts were made either of 100% cotton or of 100% polyester, and were knitted or woven. Some garments were treated with Bio-Protect 500 antimicrobial finish according to the experimental design. The data collected from the questionnaire included garment identification, level of exertion, duration of exercise session, number of exercise sessions, an ordinal preference scale for nine sensory elements, and reason for retiring a used garment. From the analysis of the combined CPW and PMC shirt studies, there are statistically significant differences among the mean lifetimes of various types of shirts. The exercise shirts with the longest mean lifetimes are untreated wool (600 minutes), treated cotton (526 minutes), and untreated modacrylic (515 minutes). From the combined CPW and PMC shirt studies, the most preferred material was untreated open-knit wool, which is one of the two materials that jointly were worn the longest, untreated wool, both open-knit and tight-knit. For the CP shorts study, there were no statistically significant differences in mean lifetimes of the exercise shorts at the 5% significance level due to the treatment combinations. There was therefore no justification to examine differences among levels of main effects or interactions. The preference for shorts was in this order: untreated woven polyester, untreated knitted polyester, untreated woven cotton, and treated knitted cotton. The nine preference scales were tabulated to determine the preference responses at the end of those exercise periods which were prior to the period when a garment was retired and a new garment was started. The assumption is that an unfavorable assessment of a garment leads to its retirement. The scent scale response was predominantly unfavorable at the end of the exercise period immediately prior to the exercise period when a new garment was started.

Byrne, Vicky↗
NASA NTRS1994

The evolution of enstatite and chondrules in unequilibrated enstatite chondrites: Evidence from iron-rich pyroxene

FeO-rich (Fs(sub 6)-34) pyroxene lacking cathodoluminescence (CL), hereafter black pyroxene, is a major constituent of some of the chondrules and fragments in unequilibrated (type 3) enstatite chondrites (UECs). It contains structurally oriented zones of Cr-, Mn-, V-rich, FeO-poor enstatite with red CL, associated with mm-sized blebs of low-Ni, Fe-metal and, in some cases, silica. These occurrences represent clear evidence of pyroxene reduction. The black pyroxene is nearly always rimmed by minor element (Cr, Mn, V)-poor enstatite having a blue CL. More commonly, red and blue enstatites, unassociated with black pyroxene, occur as larger grains in chondrules and fragments, and these constitute the major silicate phases in UECs. The rare earth element (REE) abundance patterns of the black pyroxene are LREE-depleted. The blue enstatite rims, however, have a near-flat to LREE-enriched pattern, approx. 0.5-4x chondritic. The petrologic and trace element data indicate that the black pyroxene is from an earlier generation of chondrules that formed in a nebular region that was more oxidizing than that of the enstatite chondrites. Following solidification, these chondrules experienced a more reducing nebular environment and underwent reduction. Some, perhaps most, of the red enstatite that is common throughout the UECs may be the product of solid-state reduction of black pyroxene. The blue enstatite rims grew onto the surfaces of the black pyroxene and red enstatite as a result of condensation from a nebular gas. The evolutionary history of some of the enstatite and chondrules in enstatite chondrites can be expressed in a four-stage model that includes: Stage 1. Formation of chondrules in an oxidizing nebular environment. Stage 2. Solid-state reduction of the more oxidized chondrules and fragments to red enstatite in a more reducing nebular environment. Stage 3. Formation of blue enstatite rims on the black pyroxene as well as on the red enstatite. Stage 4. Reprocessing, by various degrees of melting, of many of the earlier-formed materials.

Weisberg, Michael K.↗
DOE OSTI2025

Tailored glycolysis of Nylon 6 to enable upcycling into high-strength adhesives

Nylon is a high-strength polyamide widely used in automotive, textiles, packaging, etc. However, its durability makes nylon waste difficult to manage, with recycling limited to mechanical grinding to make fillers. Here, we report a catalytic glycolysis approach to deconstruct Nylon 6 into controlled-length oligomers, enabling upcycling into value-added materials. A low-molecular-weight oligomer (M n = 1.8 kg/mol) was repolymerized with diepoxy-terminated poly(bisphenol A-co-epichlorohydrin) via mechanochemistry to create a high-performance adhesive. This copolymer achieves lap shear strengths over 22 MPa on steel and bonds steel to carbon fiber composites, nearly tripling the performance of commercial adhesives even at 90°C. Thermomechanical analyses show that the adhesive retains thermal stability similar to nylon 6 but melts at lower temperatures, allowing easier processing. The material can be reprocessed and reused without significant performance loss. This study demonstrates a strategy to convert nylon 6 waste into valuable materials, offering a sustainable path for difficult-to-recycle plastics.

Nylon waste↗
DOE OSTI2025

Chemically Recyclable and Tunable Polyolefin-Like Multiblock Copolymer Adhesives

Adhesives are important in creating multilayer products, such as in packaging and construction. Most current hot-melt adhesives such as poly(ethylene-co-vinyl acetate) (EVA) and polyurethanes lack chemical recyclability and do not easily de-bond, complicating recycling. Here, we achieved tunable adhesive properties of chemically recyclable polyolefin-like multiblock copolymers through regulating the incorporation of crystalline hard blocks, amorphous soft blocks, and ester content highlighted by adhesive strengths up to 6.80 MPa. We further demonstrated applications of these adhesives in multi-layer films and showed that the adhesives can be readily de-bonded, recovered, and chemically recycled. Overall, this study into structure-property relationships, including effects of crystallinity, soft-block incorporation, and ester content of the multiblock copolymers on adhesive properties, has resulted in a modular hot-melt adhesive platform that exhibits chemical recyclability for virgin-quality adhesive re-generation, reprocessability for repeated reuse of the recovered adhesive, and tunability for designing adhesives with a wide range of low to high (up to ~80% stronger than EVA) adhesion strengths.

36 MATERIALS SCIENCE↗
NASA NTRS2026

Application of Energy-efficient Electromagnetic Melt-Processing for the Upcycling of Recycled Polyphenylene Sulfide into Multifunctional Segregated Nanocomposites

Polyphenylene sulfide (PPS) is widely used in structural and functional composites because of its thermal stability, chemical resistance, and mechanical strength. As circular manufacturing becomes increasingly important, extending the service life of recycled PPS (rPPS) is essential. However, conventional high-temperature reprocessing accelerates thermo-oxidative degradation, reducing recycled composite performance. This study proposes a rapid and potentially energy-saving upcycling strategy for rPPS using electromagnetic (EM) melt-processing to form segregated carbon nanotube (CNT) networks and produce EM-responsive nanocomposites. The aim was to determine whether CNT-assisted EM heating could reduce polymer degradation while improving multifunctional properties at ultralow filler loadings. rPPS micropellets were coated with CNTs by ball milling to create conductive shells, then compacted into green bodies (GBs) and selectively melted by rapid EM irradiation. Structural, electrical, mechanical, rheological, and electromagnetic interference (EMI) shielding properties were evaluated. Electrical percolation occurred at an ultralow CNT loading of 0.08 wt%, with conductivity reaching (1.24 ± 0.74) × 10 -5 S⋅m -1 at 0.1 wt%. At this concentration, tensile strength and modulus increased by 72% and 99%, respectively. At ~ 0.7 mm thickness, X-band EMI shielding effectiveness reached 6 dB for GBs and 3 dB after EM processing. This shows that EM melt-processing upcycles rPPS into high-performance multifunctional nanocomposites with minimum thermal degradation.

recycled↗
DOE OSTI2023

Ab Initio Evaluation of Plutonium Dioxide $S(α,β)$ and Thermal Neutron Cross Sections

Plutonium Dioxide (PuO 2 ) is an advanced fuel-cycle nuclear fuel material for thermal and fast reactors, with a melting point at 3261.8 K and thermal conductivity above 3 Wm -1 K -1 for temperatures below 1500 K. Plutonium from spent UO 2 is reprocessed to form chemically stable mixed oxide (MOX) fuel. In contrast to metallic fuels, the low PuO 2 conductivity results in high thermal gradients between fuel center and surface, resulting in structural annealing and efficient fission product migration over burnup. Crystal binding affects the doppler broadening of epithermal resonances for nuclear fuels and scattering behavior of thermal neutrons. Currently, there is no ENDF/B Thermal Scattering Law, i.e., $S(α,β)$, evaluation for PuO 2 , only free atom cross sections for Plutonium and Oxygen, respectively, which neglect lattice contributions to total cross section. Herein, ab initio lattice dynamics (AILD) techniques are employed to calculate the phonon density of states (DOS) using spin-orbit-coupling density functional theory (DFT) to predict the PuO2 paramagnetic ground-state structure. These results highlight the evaluation of $S(α,β)$ for Plutonium and Oxygen, respectively in PuO 2 and consequential generation of thermal neutron scattering cross sections for high fidelity criticality safety analysis and reactor calculations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Processing behavior evolution of recycled polypropylene: An integrated experimental and Computer-Aided engineering simulation study

Polypropylene (PP) comprises 21% of global plastics production and 18% of plastics waste, yet less than 1% of solid-waste PP is recycled in the United States (U.S.), representing significant environmental and economic challenges. Mechanical recycling, the most prevalent recycling method, subject's materials to thermomechanical stresses, which typically degrade polymer properties, affecting the quality of polymer products. This study replicates the impact of mechanical recycling through multiple extrusion cycles to examine the effects on PP's processing behavior. Dynamic scanning calorimetry (DSC) measurements showed stable melting behavior across all processing conditions, while crystallization analysis exhibited consistent shifts in kinetic parameters. Rheological characterization demonstrated progressive viscosity reductions through successive cycles, particularly pronounced at elevated reprocessing temperatures. Here, the integration of this experimental data into injection molding simulations showed that recycled PP maintains viable processing characteristics. Our findings establish quantitative correlations between processing history and material behavior, enabling optimization of processing parameters directly rather than relying on trial-and-error approaches. While these results reflect idealized recycling conditions with minimal contamination, they provide a framework for understanding fundamental property evolution during mechanical recycling.

42 ENGINEERING↗
DOE OSTI2024

Finding ways to reduce nuclear waste: searching for the unknown one step at a time

In my home country, Venezuela, research has been stagnant. Due to the political turmoil and the crisis, many educated people have left the country in search for a better life. This has caused a deficit in any technological and scientific advances, making Venezuela one of the first South American countries to have its rate of publications decline by 29% in 2013. Currently, Venezuela lacks the infrastructure and the means to keep up with the research progress as compared to other countries in South America, such as Brazil. Since coming to the United States (US), and currently working for a national laboratory, the active research environment endorses a wide range of careers and engineering programs that allow researchers to thrive at any given field. Researchers have access to funds and tools to succeed in developing materials for the future. There are 17 national laboratories in the US, and all of these have a different research focus/objective. As examples, Los Alamos National Laboratory and Sandia National Laboratory focus is on national homeland security, weapon science, radiation effects, among others. Argonne National Laboratory focuses on nuclear energy, energy storage, high performance computing, etc. At Idaho National Laboratory (INL) the research focuses on innovating nuclear energy and clean energy resources, critical infrastructure materials, along with fuel cycle solutions to manage, dispose and find ways to recycle current and future radiological waste. Compared to other national laboratories, INL focuses slightly more on applied processes and how nuclear energy can be innovated to next reactor design and technologies. The research being conducted at INL made me apply for a Seaborg distinguished postdoctoral position. For the position itself, the researcher must submit a proposal related to actinide chemistry on a research field area. In this position, 50% of my time will be focused on my own proposal. The proposal that I am working on is focused on the innovation of nuclear energy and fuel cycle recycling, which is why I was mainly interested on working at this national laboratory. To give a bit more context of what my proposal is about, a little bit of background is necessary: After the nuclear fuel (UO2) is used in a reactor, the fuel matrix is then characterized by various fission products (FP). Among these FP (including rare earth elements, alkali/alkaline earths, and actinides), many can potentially be recovered through nuclear reprocessing technologies. In pyroprocessing, the used nuclear fuel undergoes electrochemical dissolution into a molten chloride salt mixture in an electrorefiner. Initially, uranium is reduced onto an inert cathode by applied potentials. However, numerous remaining FPs accumulate in the melt and pose challenges for recovery by an inert electrode, particularly the rare earth elements (e.g., Nd, Gd, Pr, Sm) due to their multivalent oxidation states and tendencies toward side reactions, leading to their dissolution in the electrolyte. These recovery challenges result in inefficiencies and necessitate the continual discarding of the molten chloride salt, thereby generating additional waste. Furthermore, the presence of rare earth elements and other fission products in the molten salt electrolyte alters its physical and chemical properties, affecting both uranium recovery efficiency and the longevity of the molten chloride salt. To improve the recovery efficiency of the FP, specifically rare earth elements, I am investigating the fundamental interactions between rare earth elements in the molten chloride salt and their metallic form. The kinetic pathways and the chemical reactions of these elements will give insights on how the recovery efficiency can be improved. The interactions and speciation of these elements are being studied by spectro-electrochemistry at high temperature environments in quartz and other ceramic materials (e.g., alumina crucibles). Some of the challenges I am facing specifically relates the reactivity of some of these elements with different glass and crucible materials. Although my research focuses on fundamental science, it will benefit the applied process by generating new scientific knowledge and closing the gap for an efficient recycling of the waste: one step at a time.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1990

The effect of thermal damage on the mechanical properties of polymer regrinds

Reprocessed polymers are subjected to high processing temperatures that result in the breakdown of molecular chains and changes in the molecular structures. These phenomena are reflected in the mechanical properties of materials. Practically every regrind is seen as a new material. These experiments deal with the molding, regrinding, and reprocessing of test specimens for the study of their mechanical properties. The comparative test data from each recycled material would give students an insight of the molecular structures and property degradation. Three important rheological and mechanical properties such as melt flow, impact strength, and flexural strength are to be determined. These properties play key roles in the selection of engineering materials. The material selected for demonstration was Makrolon 3000L, a polycarbonate thermoplastic from Bayer AG. The thermal degradation due to repeated processing is reflected in the decrease in molecular weight and breakdown of molecular chains causing increase in melt flow. The Izod-impact resistance and the flexural strength deteriorate gradually.

Kundu, Nikhil K.↗
NASA NTRS2013

Corundum-Hibonite Inclusions and the Environments of High Temperature Processing in the Early Solar System

Calcium, Aluminum-rich inclusions (CAIs) are composed of the suite of minerals predicted to be the first to condense from a cooling gas of solar composition [1]. Yet, the first phase to condense, corundum, is rare in CAIs, having mostly reacted to form hibonite followed by other phases at lower temperatures. Many CAIs show evidence of complex post-formational histories, including condensation, evaporation, and melting [e.g. 2, 3]. However, the nature of these thermal events and the nebular environments in which they took place are poorly constrained. Some corundum and corundum-hibonite grains appear to have survived or avoided these complex CAI reprocessing events. Such ultra-refractory CAIs may provide a clearer record of the O isotopic composition of the Sun and the evolution of the O isotopic composition of the planet-forming region [4-6]. Here we present in situ O and Mg isotopic analyses of two corundum/hibonite inclusions that record differing formation histories.

Needham, A. W.↗
DOE OSTI2023

Endowing Polythioester Vitrimer with Intrinsic Crystallinity and Chemical Recyclability

Abstract Technologically important thermosets face a long‐standing end‐of‐life (EoL) problem of non‐reprocessability, a more sustainable solution of which has resolved to nascent vitrimers that can merge the robust material properties of thermosets and the reprocessability of thermoplastics. However, the lifecycle of vitrimers is still finite, as they often suffer from significant deterioration of mechanical performance following multiple reprocessing cycles, analogous to mechanical recycling, and they often show undesired creep under working conditions. To address these two key limitations, we have developed a cross‐linked semi‐crystalline polythioester with both dynamic covalent bonds and intrinsic crystallinity and chemical recyclability, affording a vitrimeric system that exhibits not only reprocessability and crystallinity‐restricted creep but also complete chemical recyclability to initial monomer by catalyzed depolymerization in solution or bulk. Therefore, reported herein is an “infinite” vitrimer system that is empowered with a facile closed‐loop EoL option once serial reprocessing deteriorates performance and the material can no longer meet the application requirements. Specifically, the polythioester vitrimer was constructed by copolymerization of a bicyclic thioester with a bis‐dithiolane, producing dynamically cross‐linked polythioesters with excellent property tunability, from amorphous to semi‐crystalline states and melting transition temperatures from 91 to 178 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

A new carbon-rich phase (COPS) in Antarctic micrometeorites

The contemporary flux of micrometeorites with sizes greater than 50 microns reaching the Earth's surface each year (about 20,000 tons/a) is much greater than the value of approximately 100 tons/a reported for conventional meteorites up to masses of approximately 10,000 tons. Moreover, on the average, Antarctic micrometeorites contain at least as much carbon as does Orgueil, the most C-rich meteorite. Micrometeorites are thus responsible for most of the carbon accreted by the Earth. In this paper we report SEM observations of a new C-rich 'dirty magnetite' phase observed as tiny inclusions in both melted and unmelted micrometeorites. This phase, which is enriched in C, O, P, S, Fe, frequently shows Ni contents in excess of 0.2 percent, strongly suggestive of an 'extraterrestrial' origin. We also discovered this 'COPS' phase in the fusion crust of Murchison. It appears likely that COPS is a product of meteoroid reprocessing during frictional heating in the Earth's atmosphere and/or its fast 'weathering' in the upper atmosphere. Upon 'catalyzed' hydrolysis this phase might have facilitated the functioning of micrometeorites as 'micro-chondritic-reactors' for the synthesis of prebiotic molecules on the early Earth.

Engrand, C.↗
NASA NTRS2001

Production of Bulk and Fiber Glass in Space

The production of bulk glass and fiber glass in space and on the moon and Mars should lead to superior products. Specifically glass plates for windows and optical elements could be produced with theoretical strengths by production in vacuum. Water vapor is known to decrease glass strength by up to two orders of magnitude from theoretical. A low gravity glass plate apparatus prototype has been designed and built which uses centrifugal force to shape the glass and solar energy to melt the glass. Glass fiber could be produced on the moon or Mars from in-situ materials using standard technologies. This material could then be used as reinforcement in composite materials in construction of bases. Also, it has been shown that processing in reduced gravity suppresses crystallization in certain heavy metal fluoride glasses. It is proposed to reprocess optical fiber preforms on the space station and then pull these into optical fiber. It is estimated that the attenuation coefficient should be reduced by two orders of magnitude.

Tucker, Dennis S.↗
DOE OSTI2023

Survey of Uranium Nitride and Mixed Oxide Fuels for Microreactor Applications

Different fuel systems are being proposed for use in microreactors including TRISO fuel and metallic U-Zr based fuel. TRISO fuel is considered the main fuel option for most of the industry teams. Given the need for compact size core and potential for long fuel life of a microreactor, high density fuels such as metallic and nitride fuels are potential options. Of interest here is the uranium nitride (UN) option, which can allow for higher fissile material content and higher thermal conductivity compared to conventional uranium oxide fuel, and also has higher melting temperature compared to metallic fuel. Meanwhile, the current availability is limited for high assay low enriched uranium (HALEU) that is needed for high density fuels, which motivates the consideration of using Pu as a potential replacement for HALEU until adequate production capacity is in place. Current Pu availability is mainly attributed to the inventory of excess weapons Pu rather than through reprocessing of spent nuclear fuel. This inventory of excess Pu can be used in both metallic and oxide fuel systems to replace HALEU. Of interest here, the oxide form, that is the mixed oxide form of PuO 2 and UO 2 (MOX). In this report, the options of using UN or MOX, in both pellet and TRISO fuel forms, in microreactors are evaluated in relation to their properties, fuel performance and irradiation data, as well as fabrication. Gaps related to those areas are identified for both fuel systems, to guide future activities by DOE programs such as the advanced fuels campaign (AFC), to enable their use in microreactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗