Search NASA⌕ Search

SEARCH · Search NASA

Results for “metal insulator semiconductor structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Low trap states in in situ SiN{sub x}/AlN/GaN metal-insulator-semiconductor structures grown by metal-organic chemical vapor deposition

We report the use of SiN{sub x} grown in situ by metal-organic chemical vapor deposition as the gate dielectric for AlN/GaN metal-insulator-semiconductor (MIS) structures. Two kinds of trap states with different time constants were identified and characterized. In particular, the SiN{sub x}/AlN interface exhibits remarkably low trap state densities in the range of 10{sup 11}–10{sup 12 }cm{sup −2}eV{sup −1}. Transmission electron microscopy and X-ray photoelectron spectroscopy analyses revealed that the in situ SiN{sub x} layer can provide excellent passivation without causing chemical degradation to the AlN surface. These results imply the great potential of in situ SiN{sub x} as an effective gate dielectric for AlN/GaN MIS devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical Characteristics and Interface Properties of III Nitride-Based Metal-Insulator-Semiconductor Structure

In this work, III-Nitride based metal-insulator-semiconductor (MIS) structure has been studied using AlN/GaN heterostructures on Si (111) with AlN buffer layer grown by plasma-assisted molecular beam epitaxy (MBE). The structural and electrical characteristics of the films were studied through high resolution x-ray diffraction (HRXRD), capacitance-voltage (C-V) and current-voltage (I-V) measurements. The value of flat-band voltage was -0.7 V. A total fixed oxide charge density of 2.73x10{sup 11} cm{sup -2} was estimated. Terman's method was used to obtain the density of interface state in the MIS structure. The analysis showed low interface state density values of 3.66x10{sup 11} cm{sup -2} eV{sup -1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of AlN/AlGaN/GaN metal-insulator-semiconductor structure by using capacitance-frequency-temperature mapping

AlN/AlGaN/GaN metal-insulator-semiconductor (MIS) structure is analyzed by using capacitance-frequency-temperature (C-f-T) mapping. Applying sputtering-deposited AlN, we attained AlN/AlGaN/GaN MIS heterostructure field-effect transistors with much suppressed gate leakage currents, but exhibiting frequency dispersion in C-V characteristics owing to high-density AlN/AlGaN interface states. In order to investigate the interface states deteriorating the device performance, we measured temperature-dependent frequency dispersion in the C-V characteristics. As a result, we obtained C-f-T mapping, whose analysis gives the activation energies of electron trapping, namely the interface state energy levels, for a wide range of the gate biases. This analysis method is auxiliary to the conventional conductance method, serving as a valuable tool for characterization of wide-bandgap devices with deep interface states. From the analysis, we can directly evaluate the gate-control efficiency of the devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of the dielectric for the charging dynamics of the dielectric/barrier interface in AlGaN/GaN based metal-insulator-semiconductor structures under forward gate bias stress

The high density of defect states at the dielectric/III-N interface in GaN based metal-insulator-semiconductor structures causes tremendous threshold voltage drifts, ΔV{sub th}, under forward gate bias conditions. A comprehensive study on different dielectric materials, as well as varying dielectric thickness t{sub D} and barrier thickness t{sub B}, is performed using capacitance-voltage analysis. It is revealed that the density of trapped electrons, ΔN{sub it}, scales with the dielectric capacitance under spill-over conditions, i.e., the accumulation of a second electron channel at the dielectric/AlGaN barrier interface. Hence, the density of trapped electrons is defined by the charging of the dielectric capacitance. The scaling behavior of ΔN{sub it} is explained universally by the density of accumulated electrons at the dielectric/III-N interface under spill-over conditions. We conclude that the overall density of interface defects is higher than what can be electrically measured, due to limits set by dielectric breakdown. These findings have a significant impact on the correct interpretation of threshold voltage drift data and are of relevance for the development of normally off and normally on III-N/GaN high electron mobility transistors with gate insulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Parameters of Metal–Insulator–Semiconductor Structures with Ultrathin Insulating Layer from High-Frequency Capacitance–Voltage Measurements

A simple numerical method for processing the data of the high-frequency capacitance–voltage characteristics of metal–insulator–semiconductor structures is proposed. The approach is based on analyzing the experimental characteristics near the flat-band states, where the charge exchange of surface localized electron states is of little importance compared with changes in the near-boundary charged layer in the semiconductor. The developed technique makes it possible, first, to find the necessary parameters of the semiconductor and insulating layer and, second, to obtain the experimental field dependences of the energy-band bending in the semiconductor and the total concentration of the built-in charge, the charge of boundary states and minority charge carriers at the semiconductor–insulator interface in the range from the flat bands to deep depletion. The technique is well applicable to structures with an ultra-thin insulating layer. On n-Si-based metal–oxide–semiconductor samples with an oxide thickness of 39 Å, experimental approbation of the proposed approach is carried out. The accuracy of the obtained results is 2–3%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical properties of metal–insulator–semiconductor structures based on n-GaAs with InAs quantum dots deposited onto the surface of an n-GaAs layer

The properties of metal–insulator–semiconductor (MIS) structures based on n-GaAs in which silicon oxide and yttria-stabilized zirconia and hafnia are used as the insulator containing InAs quantum dots, which are embedded at the insulator/n-GaAs interface, are investigated. The structures manifest the resistive switching and synaptic behavior.

36 MATERIALS SCIENCE↗

Determination of the density of surface states at the semiconductor-insulator interface in a metal-insulator-semiconductor structure

The temporal dependence of thermal generation of electrons from occupied surface states at the semiconductor-insulator interface in a metal-insulator-semiconductor structure is studied. It is established that, at low temperatures, the derivative of the probability of depopulation of occupied surface states with respect to energy is represented by the Dirac {delta} function. It is shown that the density of states of a finite number of discrete energy levels under high-temperature measurements manifests itself as a continuous spectrum, whereas this spectrum appears discrete at low temperatures. A method for processing the continuous spectrum of the density of surface states is suggested that method makes it possible to determine the discrete energy spectrum. The obtained results may be conducive to an increase in resolution of the method of non-stationary spectroscopy of surface states.

36 MATERIALS SCIENCE↗

Features of high-frequency measurements of the impedance of metal-insulator-semiconductor structures with an ultrathin oxide

The possibilities of using the data of high-frequency measurements of the impedance of metal-oxide-semiconductor structures with an ultrathin insulating layer for determining the parameters of the semiconductor and the tunneling characteristics of the insulator are considered. If the accuracy of the experiment makes it possible to record both the active and reactive impedance components, the thickness of the surface depletion layer, the resistance of the semiconductor base portion, the differential tunnel conductivity of the insulating layer, and the differential tunneling-stimulated current of the generation of electron-hole pairs are calculated using the values of the capacitance and conduction of the structure measured at two frequencies. In the case, where the values of the active component of the impedance is beyond the accuracy of measurements, analysis of the parameters is possible upon four-frequency organization of the experiment from the values of only the capacitances with an increased accuracy of their measurements. A test for the necessary accuracy of data of such an experiment is formulated. If the test fails, it is possible to determine only the capacitance of the surface depletion layer in the semiconductor and, in this case, it is sufficient to implement only the single-frequency experiment.

36 MATERIALS SCIENCE↗

A Poisson–Nernst–Planck Model of Ion Transport and Interface Segregation in Metal–Insulator–Semiconductor Structures and Solar Cells

A numerical model that describes the transport of mobile ionic species in metal–insulator–semiconductor (MIS) and photovoltaic (PV) devices subject to temperature and voltage stress is presented. The finite element method (FEM) is used to solve the Nernst–Planck equation while imposing Poisson's equation self-consistently as a restriction for the electrostatic potential. This allows the contribution of the ionic species to the potential to be taken into account. Using a variational formulation eases the implementation of diverse boundary conditions, including the incorporation of segregation kinetics at the device interfaces. Segregation across the dielectric–semiconductor interface is relevant to modeling the electronic device degradation in systems where contamination reaches the semiconductor. The model in closed systems with no-flux boundary conditions is validated first. In the limiting case of low contamination levels with respect to the gate bias, the FEM solution matches analytically derived approximations. Then, the implementation is broadened to include an open boundary at the dielectric–semiconductor interface to account for leakage of ions. The predicted time dependence of the flatband voltage in Na-contaminated MIS test structures agrees well with measurements. This model successfully captures the role of long-range ion transport at concentrations of relevance to electronic and PV device instability and neuromorphic computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Oxygen and germanium migration at low temperature influenced by the thermodynamic nature of the materials used in germanium metal-insulator-semiconductor structures

The influence of the reductive character of the metals used for the gate electrode on O migration in gate stacks and following reductive or oxidative reactions at an interface between a high permittivity (high-k) insulating layer and Ge or Si was investigated. The magnitude of the increase or decrease of Ge or Si oxides in the gate stacks caused by the metal layer deposition can be systematically correlated with the oxygen chemical potential (μ{sub O}) of gate metals for both Ge and Si systems. However, the influence of the gate metals on oxidative/reductive reactions of a semiconductor element is more significant for the Ge gate stacks than the Si system. Detailed investigations of Ge oxide as a function of depth were used to determine that the strong μ{sub O} dependence of the increase or decrease in the Ge oxide is because of the high diffusivity of Ge into the high-k oxide. In particular, migration of Ge into the high-k oxide occurs concurrently with O migration towards the reductive metal layer, and the strong reductive character of the metal significantly influences the decrease in the amount of Ge oxide. These results indicate the importance of the selection of gate metals based on μ{sub O} for controlling high-k/Ge interfacial structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature dependent junction capacitance-voltage characteristics of Ni embedded TiN/SiO{sub 2}/p-Si metal–insulator–semiconductor structure

This work presents the junction capacitance–voltage characteristics of highly textured/epitaxial Ni nanoparticle embedded in TiN matrix (TiN(Ni)) metal-insulator-semiconductor TiN(Ni)/SiO{sub 2}/p-Si (100) heterojunction in the temperature range of 10–300 K. This heterojunction behaves as metal-semiconductor junction with unavoidable leakage through native oxide SiO{sub 2} layer. The clockwise hysteresis loop has been observed in the capacitance-voltage characteristics measured at various frequencies mainly due to presence of trap centers at the TiN(Ni)/SiO{sub 2} interface and these are temperature dependent. The spin-dependent trap charge effect at the interface influences the quadratic nature of the capacitance with magnetic field. The junction magnetocapacitance (JMC) is observed to be dependent on both temperature and frequency. The highest JMC of this heterojunction has been observed at 200 K at higher frequencies (100 kHz–1 MHz). It is found that there is not much effect of band structure modification under magnetic field causing the JMC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum-well charge and voltage distribution in a metal–insulator–semiconductor structure upon resonant electron Tunneling

The prerequisites for electron storage in the quantum well of a metal–oxide–p{sup +}-Si resonant-tunneling structure and the effect of the stored charge on the voltage distribution are theoretically investigated. Systems with SiO{sub 2}, HfO{sub 2}, and TiO{sub 2} insulators are studied. It is demonstrated that the occurrence of a charge in the well in the case of resonant transport can be expected in structures on substrates with an acceptor concentration from (5–6) × 10{sup 18} to (2–3) × 10{sup 19} cm{sup –3} in the range of oxide thicknesses dependent on this concentration. In particular, the oxide layer thickness in the structures with SiO{sub 2}/p{sup +}-Si(10{sup 19} cm{sup –3}) should exceed ~3 nm. The electron density in the well can reach ~10{sup 12} cm{sup –2} and higher. However, the effect of this charge on the electrostatics of the structure becomes noticeable only at relatively high voltages far above the activation of resonant transport through the first subband.

36 MATERIALS SCIENCE↗

Electrical and photoelectric properties of Si-based metal–insulator–semiconductor structures with Au nanoparticles at the insulator–semiconductor interface

It is shown that the formation of Au nanoparticles at the insulator–silicon interface in structures with a high density of surface states results in a shift of the Fermi-level pinning energy at this interface towards the valence-band ceiling in silicon and in increasing the surface-state density at energies close to the Fermi level. In this case, a band with a peak at 0.85 eV arises on the photosensivity curves of the capacitor photovoltage, which is explained by the photoemission of electrons from the formed Au-nanoparticle electron states near the valence-band ceiling in silicon.

36 MATERIALS SCIENCE↗

Metal-Insulator-Semiconductor (MIS) Structure with AlN Dielectric

In this paper, we present the study of the structural and electrical properties of AlN/GaN thin films grown on Si (111) substrates by plasma-assisted molecular beam epitaxy (RF-MBE) with AlN buffer layer. The performance of aluminum nitride (AlN) as insulator and aluminum (Al) contacts is presented. The thickness of GaN film and AlN insulating film as seen from SEM cross section are about 357.3 nm and 63.38 nm respectively. The presence of Ga, Al and N are confirmed by energy dispersive X-ray (EDX) measurement. The X-ray diffraction (XRD) measurement reveals that the samples are all wurtzite hexagonal AlN and GaN structure. The fabricated metal-insulator-semiconductor (MIS) structure was characterized using capacitance-voltage (C-V) measurements.

36 MATERIALS SCIENCE↗