Search NASA⌕ Search

SEARCH · Search NASA

Results for “natural oscillation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Forced Oscillation Grid Vulnerability Analysis and Mitigation Using Inverter-Based Resources: Texas Grid Case Study

Forced oscillation events have become a challenging problem with the increasing penetration of renewable and other inverter-based resources (IBRs), especially when the forced oscillation frequency coincides with the dominant natural oscillation frequency. A severe forced oscillation event can deteriorate power system dynamic stability, damage equipment, and limit power transfer capability. This paper proposes a two-dimension scanning forced oscillation grid vulnerability analysis method to identify areas/zones in the system that are critical to forced oscillation. These critical areas/zones can be further considered as effective actuator locations for the deployment of forced oscillation damping controllers. Additionally, active power modulation control through IBRs is also proposed to reduce the forced oscillation impact on the entire grid. The proposed methods are demonstrated through a case study on a synthetic Texas power system model. The simulation results demonstrate that the critical areas/zones of forced oscillation are related to the areas that highly participate in the natural oscillations and the proposed oscillation damping controller through IBRs can effectively reduce the forced oscillation impact in the entire system.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Approximation of the Frequency-Amplitude Curve Using the Homotopy Analysis Method

The Frequency-Amplitude (F-A) curve on power system oscillation under a large disturbance characterizes how a natural oscillation mode transitions to nonlinear oscillations with growing amplitudes and decaying frequencies. The existing formulation of the F-A curve is derived by solving elliptical integrals on oscillation of a single-machine-infinite-bus equivalent about the targeted oscillation mode. The formula is in a form of infinite series and needs to sum a large number of terms for satisfactory accuracy. This paper introduces an explicit, approximate expression obtained from the Homotopy Analysis Method on the F-A curve. The proposed F-A curve expression is derived from an SMIB system and verified on the IEEE 3-machine 9-bus system to show how the oscillation frequency of a dominant mode varies with oscillation amplitude under large disturbances.

frequency-amplitude (F-A) curve↗
DOE OSTI2023

Modeling Wavelength Dependent Mid-infrared (5.5–25 μm) Optical Constants of Silicate Glasses: A Genetic Algorithm Approach

Wavelength-dependent mid-infrared (400–1,800 cm -1 ; 5.56–25 μm) optical constants (real and imaginary indices of refraction; n and k) are determined using reflectance spectra at a spectral sampling of 4 cm -1 for several silicate glasses of varying SiO 2 wt% which include (a) basaltic volcanic glass from Kilauea, Hawaii, (b) synthetic andesite, (c) two synthetic dacites, (d) obsidian volcanic glass from Mount Lassen, California, (e) synthetic rhyodacite, and (f) rhyolitic volcanic glass from Mexico. Because glasses are optically isotropic, no specific orientation was required for spectral measurements, and polished glass samples were measured at random orientations using micro-FTIR spectrometer. Lorentz-Lorenz dispersion theory and Fresnel reflectance model for high symmetry materials were used to model the optical constants by optimizing oscillator parameters in modeled spectra to match laboratory spectra. A genetic algorithm (GA) approach automatically finds the natural oscillators and their parameters for each spectrum, and then uses these parameters in a non-linear least squares optimization routine. The study compared spectral parameters such as Christiansen feature, reststrahlen bands (RBs), and the peaks centered around 860–1,100 (peak 1) and 400–480 cm -1 (peak 2) of n and k to their respective SiO 2 wt% of the glasses. CF, RBs, peak 1 of n and k, and peak 2 of n shift to higher wavenumbers with increased SiO 2 wt%, whereas peak 2 of k shifts to lower wavenumbers with increased SiO 2 wt%. Derived optical constants of these glasses will improve quantitative abundance mapping of volcanic materials on the surfaces of silicate targets in the Solar System.

58 GEOSCIENCES↗
DOE OSTI2022

Examining AGN UV/Optical Variability beyond the Simple Damped Random Walk

We present damped harmonic oscillator (DHO) light-curve modeling for a sample of 12,714 spectroscopically confirmed quasars in the Sloan Digital Sky Survey Stripe 82 region. DHO is a second-order continuous-time autoregressive moving-average process, which can be fully described using four independent parameters: a natural oscillation frequency (ω 0 ), a damping ratio (ξ), a characteristic perturbation timescale (τ perturb ), and an amplitude for the perturbing white noise (σ ϵ ). The asymptotic variability amplitude of a DHO process is quantified by σ DHO —a function of ω 0 , ξ, τ perturb , and σ ϵ . We find that both τ perturb and σ ϵ follow different dependencies with rest-frame wavelength (λ RF ) on either side of 2500 Å, whereas σ DHO follows a single power-law relation with λ RF . After correcting for wavelength dependence, σ DHO exhibits anticorrelations with both the Eddington ratio and the black hole mass, while τ perturb —with a typical value of days in the rest frame—shows an anticorrelation with the bolometric luminosity. Modeling active galactic nuclei (AGN) variability as a DHO offers more insight into the workings of accretion disks close to the supermassive black holes at the center of AGN. The newly discovered short-term variability (characterized by τ perturb and σ ϵ ) and its correlation with bolometric luminosity pave the way for new algorithms that will derive fundamental properties (e.g., Eddington ratio) of AGN using photometric data alone.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Hydrokinetic energy harvesting from slow currents using flow-induced oscillations

To harness marine hydrokinetic energy from slow flows, which constitute the majority of currents, tides, and rivers, new Passive Turbulence Control (PTC), consisting of large turbulence stimulators, is tested experimentally on circular cylinders on springs. Here, this study experimentally investigates the effect of PTC on the onset of Flow-Induced Oscillations (FIO) and particularly the relative onset of Vortex-Induced Vibrations (VIV) and galloping. Experiments are conducted in the Low Turbulence Free Surface Water Channel, University of Michigan. Fixed are: mass ratio m* = 1.48, aspect ratio l/D = 10.29, and total damping ratio ζ = 0.04. Parameters are: cylinder diameter D, spring stiffness K, PTC location and height, and flow speed U$\in$[0.36 m/s-1.45 m/s]. Placing the leading edge of PTC at 40–60° induces high amplitude FIO while placement at 10–20° suppresses FIO. As PTC height increases, VIV and galloping initiate earlier and exhibit higher amplitude with a steeper slope. Lower spring stiffness initiates VIV earlier by reducing the oscillator natural frequency in water. Even though large PTC maintained its effectiveness in initiating galloping early, it has no effect on the earlier initiation of VIV, which starts at a nearly fixed reduced velocity. Lower spring stiffness and large PTC enable power generation at low current speed (0.2 m/s).

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Tidal Circularization of Binaries by Resonance Locking. I. The Importance of the Pre-main Sequence

Although tidal dissipation in binary stars has been studied for over a century, theoretical predictions have yet to match the observed properties of binary populations. This work quantitatively examines the recent proposal of tidal circularization by resonance locking, where tidal dissipation arises from resonances between the star’s natural oscillation frequencies and harmonics of the orbital frequency, and where resonances are “locked” for an extended period of time due to concurrent stellar evolution. We focus on tidal resonances with axi-symmetric gravity modes, and examine binaries with primary masses from one to two solar masses. We find that orbital evolution via resonance locking occurs primarily during the star’s pre-main-sequence phase, with the main-sequence phase contributing negligibly. Resonance locking, ignoring nonlinearity, can circularize binaries with peri-center distances out to ∼10 stellar radii, corresponding to circular periods of ∼4–6 days. However, we find resonantly excited gravity modes will become nonlinear in stellar cores, which prevents them from reaching their full, linear amplitudes. We estimate that such a “saturated resonance lock” reduces the circularization period by about a third, but resonance locking remains much more effective than the cumulative actions of equilibrium tides. In a companion paper, we examine recent binary data to compare against theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Model reduction for a power grid model

We examine the complexity of constructing reduced order models for subsets of the variables needed to represent the state of the power grid. In particular, we apply model reduction techniques to the DeMarco-Zheng power grid model. We show that due to the oscillating nature of the solutions and the absence of timescale separation between resolved and unresolved variables, the construction of accurate reduced models becomes highly non-trivial because one has to account for long memory effects. In addition, we show that a reduced model that includes even a short memory is drastically better than a memoryless model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Fault Location Using the Natural Frequency of Oscillation of Current Discharge in MTdc Networks

This paper discusses a novel offline-fault location approach using single ended measurements. The natural dissipation of the circuit parameters are considered for fault location. A relationship between the damped natural frequency of oscillation of the transmission line current and fault location is established. The hybrid dc circuit breaker (dcCB) interrupts the fault current, whereby the transmission line current attenuates under the absence of any driving voltage source. The line capacitance discharges into the fault at a specific frequency of oscillation and rate of attenuation. Utilizing this information, the fault location in a multi-terminal direct current (MTdc) network can be obtained. A three terminal radial model of a MTdc is used for performance evaluation of the proposed method using Power System Computer Aided Design (PSCAD)/Electromagnetic Transients including dc (EMTdc).

42 ENGINEERING↗
DOE OSTI2025

Injection locking and coupling dynamics in superconducting nanowire-based cryogenic oscillators

Oscillators designed to function at cryogenic temperatures play a critical role in superconducting electronics and quantum computing by providing stable, low-noise signals with minimal energy loss. Here, in this work, we present a comprehensive numerical study of injection locking and mutual coupling dynamics in superconducting nanowire (ScNW)-based cryogenic oscillators. Using the design space of a standalone ScNW-based oscillator, we investigate two critical mechanisms that govern frequency synchronization and signal coordination in cryogenic computing architectures: (1) injection locking induced by an external AC signal with a frequency near the oscillator's natural frequency, and (2) the mutual coupling dynamics between two ScNW oscillators under varying coupling strengths. We identify key design parameters—such as shunt resistance, nanowire inductance, and coupling strength—that govern the locking range. Additionally, we examine how the amplitude of the injected signal affects the amplitude of the locked oscillation, offering valuable insights for power-aware oscillator synchronization. Furthermore, we analyze mutual synchronization between coupled ScNW oscillators using capacitive and resistive coupling elements. Our results reveal that the phase difference between oscillators can be controlled by tuning the coupling strength, enabling programmable phase-encoded information processing. These findings could enable building ScNW-based oscillatory neural networks, synchronized cryogenic logic blocks, and on-chip cryogenic resonator arrays.

Artificial neural networks↗
DOE OSTI2021

Moisture-induced autonomous surface potential oscillations for energy harvesting

A variety of autonomous oscillations in nature such as heartbeats and some biochemical reactions have been widely studied and utilized for applications in the fields of bioscience and engineering. Here, we report a unique phenomenon of moisture-induced electrical potential oscillations on polymers, poly([2-(methacryloyloxy)ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide-co-acrylic acid), during the diffusion of water molecules. Chemical reactions are modeled by kinetic simulations while system dynamic equations and the stability matrix are analyzed to show the chaotic nature of the system which oscillates with hidden attractors to induce the autonomous surface potential oscillation. Using moisture in the ambient environment as the activation source, this self-excited chemoelectrical reaction could have broad influences and usages in surface-reaction based devices and systems. As a proof-of-concept demonstration, an energy harvester is constructed and achieved the continuous energy production for more than 15,000 seconds with an energy density of 16.8 mJ/cm 2 . A 2-Volts output voltage has been produced to power a liquid crystal display toward practical applications with five energy harvesters connected in series.

42 ENGINEERING↗
DOE OSTI2021

Inter-IBR Oscillation Modes

This research addresses the following question: For a weak grid with multiple-IBRs, what is the nature of oscillation modes? The analysis of a system consisting of two identical IBRs offers a glimpse of the picture. It shows that the system has a weak-grid mode and an inter-IBR mode. For the weak-grid mode, two IBRs work as an aggregated one to interact with the grid. Furthermore, this mode is sensitive to IBR exporting power level and grid strength. For the inter-IBR mode, two IBRs oscillate against each other. This mode is less sensitive to grid strength and power level.

14 SOLAR ENERGY↗
DOE OSTI2020

Dirac oscillator: An alternative basis for nuclear structure calculations

The isotropic harmonic oscillator supplemented by a strong spin-orbit interaction has been the cornerstone of nuclear structure since its inception more than seven decades ago. In this paper we introduce—or rather re-introduce—the “Dirac oscillator,” a fully relativistic basis that has all the desired attributes of the ordinary harmonic oscillator while naturally incorporating a strong spin-orbit coupling. To assess the power and flexibility of the Dirac oscillator basis in the solution of nuclear structure problems within the framework of covariant density-functional theory. Here, self-consistent calculations of binding energies and ground-state densities for a selected set of doubly magic nuclei are performed using the Dirac oscillator basis and are then compared against results obtained with the often-used Runge-Kutta method. Results obtained using the Dirac oscillator basis reproduce with high accuracy those derived using the Runge-Kutta method and suggest a clear path for a generalization to systems with axial symmetry. Although the harmonic oscillator with spin-orbit corrections has been the staple of the nuclear shell model since the beginning, the Dirac oscillator is practically unknown among the nuclear physics community. In this paper we illustrate the power and flexibility of the Dirac oscillator and suggest extensions to the study of systems without spherical symmetry, as required in constrained calculations of nuclear excitations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Magnetic-field-induced nontrivial electronic state in the Kondo-lattice semimetal CeSb

Synergic effect of electronic correlation and spin-orbit coupling is an emerging topic in topological materials. Central to this rapidly developing area are the prototypes of strongly correlated heavy-fermion systems. Recently, some Ce-based compounds are proposed to host intriguing topological nature, among which the electronic properties of CeSb are still under debate. Herein, we report a comprehensive study combining magnetic and electronic transport measurements, and electronic band-structure calculations of this compound to identify its topological nature. Quantum oscillations are clearly observed in both magnetization and magnetoresistance at high fields, from which one pocket with a nontrivial Berry phase is recognized. Angular-dependent magnetoresistance shows that this pocket is elongated in nature and corresponds to the electron pocket as observed in LaBi. Nontrivial electronic structure of CeSb is further confirmed by first-principle calculations, which arises from spin splitting in the fully polarized ferromagnetic state. These features indicate that magnetic field can induce nontrivial topological electronic states in this prototypical Kondo semimetal.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of inlet throttling on thermohydraulic instability in a large scale water-based RCCS: An experimental study

The objective of the present experimental study is to investigate the effect of inlet throttling on the thermohydraulic stability of a large scale water-based Reactor Cavity Cooling System (RCCS). The test was performed using the water-based Natural convection Shutdown heat removal Test Facility (NSTF) at Argonne, which represented a ½ axial scale and 12.5° sector slice of the full scale Framatome 625 MW t SC-HTGR RCCS concept. A two-phase steady state was first established through direct condensate refill, followed by increased inlet throttling over 10 stages, corresponding to a loss coefficient K over the range of 0.05–653. With the inlet throttling gradually increased, the system experienced a unique transition process between stabilization and destabilization. Through a stability analysis, three instability mechanisms were identified in the present test, including a compound mechanism due to both natural circulation oscillations (NCOs) and density wave oscillations (DWOs), Type-II DWOs, and geysering.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Coordinated Control of Natural and Sub-Synchronous Oscillations via HVDC Links in Great Britain Power System

Conventional power oscillation damping (POD) controllers have been designed to be effective in damping either inter-area low-frequency oscillations (LFO) or sub-synchronous oscillations (SSO). For those POD controls, model-based control design method has been widely implemented with wide-area feedback signals from phasor measurement units (PMU). However, the model accuracy of a large realistic power system can hardly be guaranteed, which will finally impact the POD damping performance. In this paper, a measurement-based method is proposed for POD design using High Voltage Direct Current links (HVDC) to realize the coordinated control of both LFO and SSO. For each type of oscillations, a band-pass filter is added to avoid the interactions between different modes. Case studies are carried out on the Great Britain 36-bus power system model with multiple HVDC links in DIgSILENT/PowerFactory. Simulation results demonstrate that the proposed PODs are effective in damping inter-area LFO and SSO simultaneously.

Zhao, Yi↗
DOE OSTI2021

Illumination-induced modulation of conductivity and Gunn oscillation properties in epitaxial GaAs

In this work, we illuminate a gallium arsenide (GaAs) Gunn device and study the light-induced changes of Gunn oscillation properties. We observe that illumination leads to the modulation of the Gunn threshold voltage, the Gunn oscillation magnitude, and the coherency of Gunn oscillation, with the nature of the modulation being closely related to the position of illumination on the device. These effects are attributed to the generation of optically excited carriers, which results in the modulation of conductivity and the electric field profile along the device. The finite element method is used to simulate the change of the field profile of the Gunn device caused by illumination. We also report an unexpected phenomenon of Gunn oscillation property manipulation with an optical chopper. In addition, wavelength-dependent, power-dependent, and pulsed illumination measurements are performed to help with further understanding the observations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Simulation of ENSO Teleconnections to Precipitation Extremes over the United States in the High-Resolution Version of E3SM

Abstract We evaluate the simulated teleconnection of El Niño–Southern Oscillation (ENSO) to winter season precipitation extremes over the United States in a long (98 years) 1950 control high-resolution version (HR; 25-km nominal atmosphere model horizontal resolution) of the U.S. Department of Energy’s (DOE) Energy Exascale Earth System Model version 1 (E3SMv1). The model bias and spatial pattern of ENSO teleconnections to mean and extreme precipitation in HR overall are similar to the low-resolution model’s (LR; 110 km) historical simulation (four-member ensemble, 1925–59). However, over the southeastern United States (SE-U.S.), HR produces stronger El Niño–associated extremes, reducing LR’s model bias. Both LR and HR produce weaker than observed increase in storm track activity during El Niño events there, but HR improves the ENSO-associated variability of moisture transport over SE-U.S. During El Niño, stronger vertical velocities in HR produce stronger large-scale precipitation, causing larger latent heating of the troposphere that pulls in more moisture from the Gulf of Mexico into the SE-U.S. This positive feedback also contributes to the stronger mean and extreme precipitation response in HR. Over the Pacific Northwest, LR’s bias of stronger than observed La Niña associated extremes is amplified in HR. Both models simulate stronger than observed moisture transport from the Pacific Ocean into the region during La Niña years. The amplified HR bias there is due to stronger orographically driven vertical updrafts that create stronger large-scale precipitation, despite weaker La Niña–induced storm track activity. Significance Statement New high-resolution Earth system models (ESMs) solve mathematical equations of fluid flow at much smaller spatial scales than prevalent ESMs, and thus are prohibitively expensive to compute. However, they can be useful for simulating accurate details of regional climate extremes that are driven by naturally occurring climate oscillations like El Niño–Southern Oscillation (ENSO). Here, we evaluate the simulation of ENSO-driven precipitation extremes over the United States in the high-resolution version of the U.S. Department of Energy’s new Energy Exascale Earth System Model version 1. We find that the high-resolution model improves upon its low-resolution counterpart over the southeastern United States by producing a better transport of moisture into the region from the Gulf of Mexico during El Niño. Over the U.S. Pacific Northwest, the high-resolution model simulates the atmospheric flow in more detail over the complex mountainous terrain. However, it also brings in more moisture from the Pacific Ocean just like the low-resolution model. This causes it to produce precipitation extremes during La Niña years there that are stronger than that observed in the real world.

54 ENVIRONMENTAL SCIENCES↗