Search NASA⌕ Search

SEARCH · Search NASA

Results for “parity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Control system failure monitoring using generalized parity relations

Many applications require that a control system must be tolerant to the failure of its components. This is especially true for large space-based systems that must work unattended and with long periods between maintenance. Fault tolerance can be obtained by detecting the failure of the control system component, determining which component has failed, and reconfiguring the system so that the failed component is isolated from the controller. Component failure detection experiments that were conducted on an experimental space structure, the NASA Langley Mini-Mast are presented. Two methodologies for failure detection and isolation (FDI) exist that do not require the specification of failure modes and are applicable to both actuators and sensors. These methods are known as the Failure Detection Filter and the method of Generalized Parity Relations. The latter method was applied to three different sensor types on the Mini-Mast. Failures were simulated in input-output data that were recorded during operation of the Mini-Mast. Both single and double sensor parity relations were tested and the effect of several design parameters on the performance of these relations is discussed. The detection of actuator failures is also treated. It is shown that in all the cases it is possible to identify the parity relations directly from input-output data. Frequency domain analysis is used to explain the behavior of the parity relations.

Vanschalkwyk, Christiaan Mauritz↗
NASA NTRS1991

Performance consequences of parity placement in disk arrays

The performance of a variety of parity placement schemes are defined and investigated to demonstrate that, at relatively large request sizes of hundreds of kilobytes, the choice of parity placement significantly affects performance (20 to 30 percent for the disk array configurations that are common today). It is shown that the left-symmetric, extended-left-symmetric and flat-left-symmetric are the best RAID level 5 parity placements. The placement with the highest read performance, flat-left-symmetric, has the lowest write performance, while the placement with the lowest read performance, left-symmetric, has the highest write performance. Suggestions for optimizing parity placements are included.

Lee, Edward K.↗
NASA NTRS1974

Input-output, expandable-parity network

Large-scale integrated circuit generates and checks parity of four eight-bit registers. In addition, circuit will indicate by output signal whether parity error exists. Circuit can also generate or check parity of words up to 32 bits. This is done by making appropriate internal wiring connections on the large-scale integrated chip.

Mckevitt, J. F., III↗
NASA NTRS1988

Generating parity relations for detecting and identifying control system component failures

The monitoring of control system sensors and actuators for failures is presently undertaken by means of an exceptionally simple form of generalized parity relations based on a discrete-time model of the dynamics of linear, time-invariant systems. These generalized parity relations are constructed by recourse to a transfer matrix-description of the system that is additionally useful in the interpretation of their properties. Attention is given to a novel method for constructing the parity relation of minimum length that depends on the output of only a single sensor.

Vander Velder, Wallace E.↗
NASA NTRS2011

Aperture Mask for Unambiguous Parity Determination in Long Wavelength Imagers

A document discusses a new parity pupil mask design that allows users to unambiguously determine the image space coordinate system of all the James Webb Space Telescope (JWST) science instruments by using two out-of-focus images. This is an improvement over existing mask designs that could not completely eliminate the coordinate system parity ambiguity at a wavelength of 5.6 microns. To mitigate the problem of how the presence of diffraction artifacts can obscure the pupil mask detail, this innovation has been created with specifically designed edge features so that the image space coordinate system parity can be determined in the presence of diffraction, even at long wavelengths.

Bos, Brent↗
NASA NTRS1980

Parity-violating electric-dipole transitions in helium

The paper examines parity-violating electric-dipole transitions in He in order to gain insight into the reliability of approximate calculations which are carried out for transitions in many-electron atoms. The contributions of the nearest-lying states are computed with a variety of wave functions, including very simple product wave functions, Hartree-Fock functions and Hylleraas-type wave functions with up to 84 parameters. It is found that values of the matrix elements of the parity-violating interaction can differ considerably from the values obtained from the good wave functions, even when these simple wave functions give accurate values for the matrix elements in question

Hiller, J.↗
NASA NTRS1983

Hygrothermomechanical fracture stress criteria for fiber composites with sense-parity

Hygrothermomechanical fracture stress criteria are developed and evaluated for unidirectional composites (plies) with sense-parity. These criteria explicity quantify the individual contributions of applied, hygral and thermal stresses as well as couplings among these stresses. The criteria are for maximum stress, maximum strain, internal friction, work-to-fracture and combined-stress fracture. Predicted results obtained indicate that first ply failure will occur at stress levels lower than those predicted using criteria currently available in the literature. Also, the contribution of the various stress couplings (predictable only by fracture criteria with sense-parity) is significant to first ply failure and attendant fracture modes.

Chamis, C. C.↗
NASA NTRS1986

Generalized parity relations for large space structures with uncertain parameters

The generalized parity relations method is a technique that can be used to detect sensor and actuator failures on a large space structure. A model of a grid structure was used to evaluate the performance of these relations. It shows their relative sensitivity to modeling errors. A method using sensor outputs and actuator inputs is required for the design of the generalized parity relations. Three different estimators are studied. The last estimator can generate relations optimized for the detection of a particular failure which are interesting when the level of sensor noise is high.

Dutilloy, J. R.↗
NASA NTRS1987

Influence of the Dirac-Hartree-Fock starting potential on the parity-nonconserving electric-dipole-transition amplitudes in cesium and thallium

The parity-nonconserving electric-dipole-transition amplitudes for the 6s1/2-7s1/2 transition in cesium and the 6p1/2-7p1/2 transition in thallium have been calculated by the Dirac-Hartree-Fock method. The effects of using different Dirac-Hartree-Fock atomic core potentials are examined and the transition amplitudes for both the length and velocity gauges are given. It is found that the parity-nonconserving transition amplitudes exhibit a greater dependence on the starting potential for thallium than for cesium.

Perger, W. F.↗
NASA NTRS1989

Parity retransmission hybrid ARQ using rate 1/2 convolutional codes on a nonstationary channel

A parity retransmission hybrid automatic repeat request (ARQ) scheme is proposed which uses rate 1/2 convolutional codes and Viterbi decoding. A protocol is described which is capable of achieving higher throughputs than previously proposed parity retransmission schemes. The performance analysis is based on a two-state Markov model of a nonstationary channel. This model constitutes a first approximation to a nonstationary channel. The two-state channel model is used to analyze the throughput and undetected error probability of the protocol presented when the receiver has both an infinite and a finite buffer size. It is shown that the throughput improves as the channel becomes more bursty.

Lugand, Laurent R.↗
NASA NTRS2014

Method of Error Floor Mitigation in Low-Density Parity-Check Codes

A digital communication decoding method for low-density parity-check coded messages. The decoding method decodes the low-density parity-check coded messages within a bipartite graph having check nodes and variable nodes. Messages from check nodes are partially hard limited, so that every message which would otherwise have a magnitude at or above a certain level is re-assigned to a maximum magnitude.

Hamkins, Jon↗
NASA NTRS1972

Odd-parity D states in He.

The states considered lie below the n = 2 threshold of He(+) and decay radiatively to the lower states. The most general D-state wave function of odd parity of two electrons is examined. The results presented are optimized with respect to four nonlinear parameters for 112 terms. A mass-polarization correction is given for all the states listed. The positions of the D states, including the reduced mass and the mass-polarization corrections, with respect to the ground state of He are reported.

Bhatia, A. K.↗
NASA NTRS1973

Experiments on the origin of molecular chirality by parity non-conservation during beta-decay

Experiments are described to test a theory for the origin of optical activity wherein the longitudinally polarized electrons resulting from parity violation during radioactive beta decay, and their resulting circularly polarized Bremsstrahlung, might interact asymmetrically with organic matter to yield optically active products. Experiments involve subjecting a number of racemic and optically active amino acid samples to irradiation in a 61700 Ci90SR-90Y beta radiation source for a period of 1.34 years, then examining them for any asymmetric effects by means of optical rotatory dispersion and analytical gas chromatography. In the cases of D,L-leucine, norleucine, norvaline and proline as solids, of D,L-leucine in solution and of D,L-tyrosine in alkaline solution no optical rotation was observed during CRD measurements in the 250-630 nm spectral region. While slight differences were noted in the percent radiolysis of solid D- (12.7%) and L-leucine (16.2%) as determined by GC, no enrichment of either enantiomer was found.

Bonner, W. A.↗
NASA NTRS1974

Experiments on the origin of molecular chirality by parity non-conservation during beta-decay

Experiments are described to test a theory for the origin of optical activity wherein the longitudinally polarized electrons resulting from parity violation during radioactive beta-decay, and their resulting circularly polarized bremsstrahlung, might interact asymmetrically with organic matter to yield optically active products. The historical background to this subject is briefly reviewed. Our experiments involve subjecting a number of racemic and optically active amino acid samples to a beta-radiation source for a period of 1.34 years (total dose: 411 Mrads), then examining them for any asymmetric effects by means of optical rotatory dispersion and analytical gas chromatography.

Bonner, W. A.↗