Search NASA⌕ Search

SEARCH · Search NASA

Results for “photovoltage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Photovoltage inversion effect and its application to semiconductor surface studies: CdS.

Experimental results on the surface states of the basal plane of CdS are presented and discussed in the light of a model of the photovoltage inversion effect. It is found that the surface states associated with this effect are in poor communication with the bulk and under normal conditions may require long periods of time to reach equilibrium. A combination of photovoltage inversion, photovoltage quenching, and photovoltage spectroscopy is believed to constitute a very effective tool for the study of surfaces of wide energy gap semiconductors.

Lagowski, J.↗
NASA NTRS1977

Surface photovoltage in exciton absorption range in CdS

The high resolution, intrinsic spectra of surface photovoltage are reported for semiconducting n-type CdS single crystals. At reduced temperatures (120-160 K) the spectra exhibit three sharp maxima due to A, B and C free exciton transitions. Energy positions of these lines and valence band parameters (spin-orbit and crystal field splittings) estimated from surface photovoltage are in good agreement with values obtained by other methods. The excitonic transitions are very sensitive to surface treatment, i.e. polishing, etching, background illumination and surface doping. The mechanism of direct interaction of free excitons with surface states is proposed to explain exciton lines in surface photovoltage.

Morawski, A.↗
NASA NTRS1977

Surface photovoltage due to photo-thermo-ionization of surface states - GaAs

Surface photovoltage spectroscopy was employed for studying the mechanism of subbandgap photoionization transitions from surface states in GaAs surfaces. It was found that the photoionization cross-section exhibits a maximum for a photon energy of about 0.9 eV. This finding indicates a photo-thermal mechanism of photovoltage, i.e., photo-induced transitions between surface state levels and the subsequent thermal ejection of electrons from the upper level into the conduction band.

Morawski, A.↗
NASA NTRS1974

Surface photovoltage method extended to silicon solar cell junction

The conventional surface photovoltage (SPV) method is extended to the measurement of the minority carrier diffusion length in diffused semiconductor junctions of the type used in a silicon solar cell. The minority carrier diffusion values obtained by the SPV method agree well with those obtained by the X-ray method. Agreement within experimental error is also obtained between the minority carrier diffusion lengths in solar cell diffusion junctions and in the same materials with n-regions removed by etching, when the SPV method was used in the measurements.

Wang, E. Y.↗
NASA NTRS1975

Surface photovoltage spectroscopy applied to gallium arsenide surfaces

The experimental and theoretical basis for surface photovoltage spectroscopy is outlined. Results of this technique applied to gallium arsenide surfaces, are reviewed and discussed. The results suggest that in gallium arsenide the surface voltage may be due to deep bulk impurity acceptor states that are pinned at the Fermi level at the surface. Establishment of the validity of this model will indicate the direction to proceed to increase the efficiency of gallium arsenide solar cells.

Bynik, C. E.↗
NASA NTRS1981

Semiconductor-ferroelectric nonvolatile memory using anomalous high photovoltages in ferroelectric ceramics

A small ferroelectric ceramic element is used with an insulating gate transistor and two diodes as an electrically addressed, nonvolatile memory device which is read out nondestructively. The device uses the anomalous photovoltaic effect in ferroelectric ceramics, an effect in which the polarity and magnitude of photovoltages depend on the direction and magnitude of remanent polarization. Experimental results give memory characteristics. The device could be programmed with pulses as short as 200 ns. There is long-time retention of stored data.

Brody, P. S.↗
NASA NTRS1982

Mathematical analysis of the Photovoltage Decay (PVD) method for minority carrier lifetime measurements

When the diffusion length of minority carriers becomes comparable with or larger than the thickness of a p-n junction solar cell, the characteristic decay of the photon-generated voltage results from a mixture of contributions with different time constants. The minority carrier recombination lifetime tau and the time constant l(2)/D, where l is essentially the thickness of the cell and D the minority carrier diffusion length, determine the signal as a function of time. It is shown that for ordinary solar cells (n(+)-p junctions), particularly when the diffusion length L of the minority carriers is larger than the cell thickness l, the excess carrier density decays according to exp (-t/tau-pi(2)Dt/4l(2)), tau being the lifetime. Therefore, tau can be readily determined by the photovoltage decay method once D and L are known.

Vonroos, O. H.↗
NASA NTRS1976

High photovoltages in ferroelectric ceramics

The short-circuit currents and photo-emfs were measured for various ceramics including barium titanate, lead metaniobate, and lead titanate. It is suggested that the emfs and currents arise from the presence of photoconductor-insulator sandwiches in the presence of space-charge-produced internal fields. Results are in agreement with the proposed theory and indicate that the ferroelectric ceramics are not only producers of high-voltage photoelectricity but a photo-battery, the polarity and magnitude of which can be switched by application of an electrical signal.

Brody, P. S.↗
NASA NTRS1981

Photovoltage response to temperature change at oxide semiconductor electrodes

A study has been carried out on single crystal electrodes of TiO2, SrTiO3, and alpha-Fe2O3 and polycrystalline WO3 to investigate the effect of cell temperature on the onset potential of n-type oxide semiconductor electrodes. It is found that the change of the onset potential with temperature is due to the potential change across the Helmholtz layer. The amount of this change depends on the point of zero zeta potential (pzzp) of the semiconductor electrode. The possibility of increasing the solar-to-chemical energy conversion efficiency of a photochemical cell by increasing the cell temperature is discussed.

Reichman, B.↗
NASA NTRS1972

Electronic characteristics of 'real' CdS surfaces.

Photovoltage spectroscopy (including photovoltage inversion and photovoltage quenching) was used to determine the electronic characteristics of real (basal and prismatic) surfaces of CdS. In room atmosphere, surface states with the following positions were found in the cadmium surfaces: Ec - Et equal to 0.05, 0.4, and 0.8 eV, and Ev - Et equal to 0.83 eV. The same surface states were present in the sulfur surfaces, with the exception of those at Ec - Et equal to 0.4 eV. In the prismatic and unetched basal surfaces, states at Ec - Et equal to 1.1 eV were found in addition to all of those found on the cadmium surfaces.

Lagowski, J.↗
NASA NTRS1974

Photomechanical vibration of thin crystals of polar semiconductors

It was found that thin crystals of polar (non-centrosymmetric) semiconductors constitute a new type of photosensitive system in which incident illumination is converted into mechanical energy: thus, illumination-induced elastic deformation (bending) was observed on thin (00.1) CdS and (111) GaAs crystals; furthermore, by employing chopped light the crystals were excited to their resonant vibration (photomechanical vibration); the dependence of the amplitude of this vibration on the energy of the incident radiation was found to be similar to the dependence of the surface photovoltage on the energy of the incident radiation (surface photovoltage spectrum). The present findings are consistent with a model based on light-induced modulation of the piezoelectric surface stresses.

Lagowski, J.↗
NASA NTRS1977

Laser-zone growth in a Ribbon-To-Ribbon, RTR, process silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

A ribbon-to-ribbon process was used for routine growth of samples for analysis and fabrication into solar cells. One lot of solar cells was completely evaluated: ribbon solar cell efficiencies averaged 9.23% with a highest efficiency of 11.7%. Spherical reflectors have demonstrated significant improvements in laser silicon coupling efficiencies. Material analyses were performed including silicon photovoltage and open circuit photovoltage diffusion length measurements, crystal morphology studies, modulus of rupture measurements, and annealing/gettering studies. An initial economic analysis was performed indicating that ribbon-to-ribbon add-on costs of $.10/watt might be expected in the early 1980's.

Gurtler, R. W.↗