Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantization (signal)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

OPTIMAL CORRELATION ESTIMATORS FOR QUANTIZED SIGNALS

Using a maximum-likelihood criterion, we derive optimal correlation strategies for signals with and without digitization. We assume that the signals are drawn from zero-mean Gaussian distributions, as is expected in radio-astronomical applications, and we present correlation estimators both with and without a priori knowledge of the signal variances. We demonstrate that traditional estimators of correlation, which rely on averaging products, exhibit large and paradoxical noise when the correlation is strong. However, we also show that these estimators are fully optimal in the limit of vanishing correlation. We calculate the bias and noise in each of these estimators and discuss their suitability for implementation in modern digital correlators.

79 ASTRONOMY AND ASTROPHYSICS↗

Discrete sensing and actuation in a simulation model of frequency responsive loads

Loads acting autonomously on a local frequency signal can improve the response of a power system to sudden changes in supply, demand, or both. In this paper we address the use of load for regulating frequency by using feedback control. We extend prior research that focused on continuous proportional control, whereby one assumes that the load responds instantaneously, continuously, and in direct proportion to the changing frequency. However, sensors employed in any practical system have a finite sensitivity which introduces quantization effects into the control. As a result, a critical factor in the design of such a control is the relationship between the sensitivity of the sensor and the gain of the actuator. To study this issue, our model is constructed in two parts. The continuous dynamics of the power system is coupled to discrete event models of the sensors by state events that describe the detection points available to them. The quantized signals from the sensors are transformed by the actuators into discrete changes of load which, in turn, change the frequency and thereby complete the control loop. We illustrate the model with a scenario that involves a sudden, unanticipated change in load and the combined response of the control and power system to recover from the event.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Gigahertz single-electron pumping in silicon with an accuracy better than 9.2 parts in 10{sup 7}

High-speed and high-accuracy pumping of a single electron is crucial for realizing an accurate current source, which is a promising candidate for a quantum current standard. Here, using a high-accuracy measurement system traceable to primary standards, we evaluate the accuracy of a Si tunable-barrier single-electron pump driven by a single sinusoidal signal. The pump operates at frequencies up to 6.5 GHz, producing a current of more than 1 nA. At 1 GHz, the current plateau with a level of about 160 pA is found to be accurate to better than 0.92 ppm (parts per million), which is a record value for 1-GHz operation. At 2 GHz, the current plateau offset from 1ef (∼320 pA) by 20 ppm is observed. The current quantization accuracy is improved by applying a magnetic field of 14 T, and we observe a current level of 1ef with an accuracy of a few ppm. The presented gigahertz single-electron pumping with a high accuracy is an important step towards a metrological current standard.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physical Layer Security at a Point-to-Point MIMO System With 1-Bit DACs and ADCs

Low-resolution converters reduce the power consumption of wireless devices and help enable large energy-efficient arrays. In this letter, we evaluate the secrecy rate for the extreme case of 1-bit single-user multiple-input multiple-output systems following two signaling approaches. In the first method, the system uses discrete signaling. In the second, the system combines Gaussian signaling with artificial noise alongside power allocation. In the first case, we give a closed-form expression of the secrecy rate and propose an algorithm that provides near-optimal results for low signal-to-noise ratios (SNRs). Further, in the second scenario, depending on the channel state information, we suggest different precoding plans and derive a secrecy rate lower bound. At low SNR, power is allocated to the main signal. Only at high SNR is optimal power allocation effective. Moreover, knowing the eavesdropper channel greatly improves the system’s secrecy.

1-bit digital-to-analog (DAC) and analog-to-digita↗

Long-range interactions between chiral molecules

Results of molecular quantum electrodynamics calculations of discriminatory interactions between two chiral molecules undergoing resonance energy transfer, van der Waals dispersion, and optical binding are presented. A characteristic feature of the theory is that the radiation field is quantized with signals consequently propagating between centres at the speed of light. In order to correctly describe optically active chromophores, it is necessary to include magnetic as well as electric dipole coupling terms in the time-dependent perturbation theory computations. Recent work investigating the effect of an absorptive and dispersive chiral medium on the rate of migration of energy will also be discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-sensitive scanning laser magneto-optical imaging system

A high-sensitive scanning laser magneto-optical (MO) imaging system has been developed. The system is mainly composed of a laser source, galvano meters, and a high-sensitive differential optical-detector. Preliminary evaluation of system performance by using a Faraday indicator with a Faraday rotation coefficient of 3.47x10{sup -5} rad/{mu}m Oe shows a magnetic sensitivity of about 5 {mu}T, without any need for accumulation or averaging processing. Using the developed MO system we have succeeded in the fast and quantitative imaging of a rotationally symmetric magnetic field distribution around an YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) strip line applied with dc-biased current, and also succeeded in the detection of quantized fine signals corresponding to magnetic flux quantum generation in a superconducting loop of an YBCO Josephson vortex flow transistor. Thus, the developed system enables us not only to do fast imaging and local signal detection but also to directly evaluate both the strength and direction of a magnetic signal.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Interlayer Exciton Condensates between Second Landau Level Orbitals in Double Bilayer Graphene

Here, we present Coulomb-drag measurements on a heterostructure comprising two Bernal-stacked bilayer graphene (BLG) sheets separated by a 2.5 nm hexagonal boron nitride (hBN) spacer in the quantum Hall (QH) regime. Using top and bottom gate control, together with an interlayer bias, we independently tune the two BLG layers into either the lowest (N = 0) or second (N = 1) Landau level (LL) orbital and probe their interlayer QH states. When both layers occupy the N = 0 orbital, we observe both interlayer exciton condensates (ECs) at integer total filling and interlayer fractional QH states, echoing the results in double monolayer graphene. In contrast to previous studies, however, when both BLG layers occupy the N = 1 orbital, we also observe quantized drag signals, signifying an interlayer exciton condensate formed between the second LLs. By tuning the layer degree of freedom, we find that this N = 1 EC state arises only when the N = 1 wave function in each BLG is polarized toward the hBN interface to maximize the interlayer Coulomb interaction.

Electrical conductivity↗

Differentiable Neural Architecture, Mixed Precision and Accelerator Co-Search

Quantization, effective Neural Network architecture, and efficient accelerator hardware are three important design paradigms to maximize accuracy and efficiency. Mixed Precision Quantization is a process of assigning different precision to different Neural Network layers for optimized inference. Neural Architecture Search (NAS) is a process of automatically designing the neural network for a task and can also be extended to search for the precision of each weight and activation matrix. In this paper, we develop the following three methods: (i) Fast Differentiable Hardware-aware Mixed Precision Quantization Search method to find optimal precision, (ii) Joint Differentiable hardware-aware Architecture and Mixed Precision Quantization Co-search, (iii) Joint Accelerator, Architecture, and Precision triple co-search to find best possibilities in all the three worlds. We demonstrate the effectiveness of our proposed methods targeting Bitfusion accelerator by searching mixed precision models on MobilenetV2. We achieve better accuracy-latency trade-off models than the manually designed and previously proposed search methods.

97 MATHEMATICS AND COMPUTING↗

Development of a Practical Secondary Control for Hardware Microgrids

Practical, vendor-agnostic interoperability guidelines for the secondary control architecture of microgrids (MGs) with multiple grid-forming (GFM) inverter-based resources (IBRs) have not yet been developed. Therefore, this paper proposes a generic and vendor-agnostic secondary control architecture that operates with all GFM IBRs and synchronous generators. This secondary control does not require the use of additional measurement devices in the MG and utilizes the inherent communication systems of the GFM units, such as Modbus TCP/IP. The practical challenges of Modbus registers, such as packet loss and quantization error, and their detrimental impacts on secondary control actions are investigated. The proposed three-stage modification for any secondary control architecture to mitigate these impacts includes: 1) averaging the data read, 2) situational event-triggering of the controller, and 3) finite iteration of the controlling action. The proposed method is validated using a 3-..phi.., 480 V, 60 Hz, 500 kVA laboratory hardware microgrid with commercial two GFM IBRs and one diesel generator. The experimental results corroborates the fact the proposed modification in the secondary control architecture is advantageous for practical usage under erroneous measurements.

communication systems↗

Achievable Rate and Energy Efficiency Analysis of Multiuser Relay-Aided Massive MIMO Downlink

In this article, the achievable sum rate and the energy efficiency (EE) are investigated for a multiuser relay-aided massive multiple-input–multiple-output (MIMO) downlink. Low-resolution digital-to-analog converters (DACs) are equipped at both the base station (BS) and the relay station (RS), and the amplify-and-forward protocol is adopted at the RS. Under the Rician fading channel, closed-form approximate expressions for the achievable sum rate are derived with perfect and imperfect channel state information. Furthermore, a more general power law is extracted to save transmit power without reducing the achievable sum rate, and a local optimal power allocation scheme is proposed to improve the channel capacity of active users. Then, the tradeoff between the achievable sum rate and the EE is discussed. The numerical results show that, due to the quantization noise, the transmit power has a limited increase in the achievable rate. In addition, it is more valuable to improve the DAC quantization bit at the RS when the number of BS antennas is larger than that of RS antennas. In addition, under strong line-of-sight channels or high pilot transmit power conditions, the channel estimation accuracy is higher, and the best tradeoff between the achievable sum rate and the EE can be obtained when the DAC quantization bit is 4.

25 ENERGY STORAGE↗

OptZConfig: Efficient Parallel Optimization of Lossy Compression Configuration

Lossless compressors have very low compression ratios that do not meet the needs of today's large-scale scientific applications that produce vast volumes of data. Error-bounded lossy compression (EBLC) is considered a critical technique for the success of scientific research. Although EBLC allows users to set an error bound for the compression, users have been unable to specify the requirements on the compression quality, limiting practical use. Our contributions are: (1) We formulate the problem of configuring EBLC to preserve a user-defined metric as an optimization problem. This allows many classes of new metrics to be preserved, which improves over current practices. (2) We present a framework, OptZConfig, that can adapt to improvements in the search algorithm, compressor, and metrics with minimal changes, enabling future advancements in this area. (3) We demonstrate the advantages of our approach against the leading methods to configure compressors to preserve specific metrics. Here, our approach improves compression ratios against a specialized compressor by up to 3 x, has a 56x speedup over FRaZ, 1000x speedup over MGARD-QOI post tuning, and 110x speedup over systematic approaches which had not been bounded by compressors before.

97 MATHEMATICS AND COMPUTING↗

Jamming Detection for Low-Resolution SC-FDE Systems: A Machine Learning Approach

Jammers interfere with communication between base stations (BSs) and legitimate users, leading to degradation of wireless system performance. Our study focuses on jamming detection for wideband single-carrier frequency domain equalization (SC-FDE) systems with low-resolution analog-to digital converters (ADCs). In such systems, jamming detection is challenging because traditional analytical approaches cannot be directly applied due to the delay dispersion in wideband channels and the non-linearity induced by low-resolution ADCs. We propose a machine learning (ML)-based jamming detection method that directly uses the quantized receive signals. Significantly, our ML-based detector can be integrated into existing standard frameworks, such as unique word (UW)-based SC-FDE systems, as it uses existing pilots without requiring additional pilots for jamming detection. Through numerical simulations, we show that two or more bits provide satisfactory performance compared to unquantized scenarios. Additionally, we demonstrate that using more and well-separated pilot symbols improves performance.

99 GENERAL AND MISCELLANEOUS↗

Microwave remote sensing for atmospheric chemistry

Microwave remote sensing is a well-established technique for making sensitive thermal emission measurements at microwave frequencies. This thermal emission described by Planck’s law is the electromagnetic radiation at microwave wavelengths intrinsically emitted from hot objects. This is the blackbody radiation that constitutes the microwave baseline signal. The transitions between quantized rotational states of the constituent gas species gives rise to spectral features on top of this background signal. A distribution of the atmospheric constituents is retrieved from the measured emission lineshape correlated to pressure broadening as a function of altitude. Thus microwave radiometers enable the detection and continuous monitoring of trace gases present in the atmosphere. Microwave radiometers are deployed at various sites around the world measuring an assortment of species and meteorological parameters of interest. Several groups worldwide are active in this field, NRL remote sensing division and the Institute of Physics at the University of Bern among the prominent few. The technology is quite mature with the availability of room temperature RF components at W–band frequencies.

58 GEOSCIENCES↗

Photon temporal-mode readout for inference of neutron star merger remnant gravitational waves

Gravitational waves emitted after neutron star binary coalescences and the information they carry about dense matter are a high-priority target for next-generation detectors. Even though such detectors are expected to observe millions of signals, detectable postmerger emission will remain rare. Here, in this work, we explore postmerger detectability and inference through an alternative detector readout scheme for data dominated by quantum-noise, which is the case above 1 kHz; photon-counting. In such a readout, signals and noise become quantized into discrete distributions corresponding to the detection of single photons measured in a chosen basis of modes. Through simulated data, we demonstrate that photon counting can be efficient even for weak signals. We find ∼1 in 100 signals with a postmerger signal-to-noise ratio of 0.2 can result in a single photon and thus be detected. Furthermore, after 2 ×10 4 signals—equivalent to 10 −2 to 1.5 years of observation—photon counting results in a twofold improvement in the measurement of the radius of a 1.6⁢𝑀 ⊙ neutron star. Constraints can be further tightened if the detector classical noise is reduced. Photon counting offers a promising alternative to traditional homodyne readout techniques for extracting information from low signal-to-noise ratio postmerger signals.

gravitational wave detection↗

Graviton detection and the quantization of gravity

We revisit a question asked by Dyson: “Is a graviton detectable?” We demonstrate that in both Dyson’s original sense and in a more modern measurement-theoretic sense, it is possible to construct a detector sensitive to single gravitons, and in fact a variety of existing and near-term gravitational wave detectors can achieve this. However, while such a signal would be consistent with the quantization of the gravitational field, we draw on results from quantum optics to show how the same signal could just as well be explained via classical gravitational waves. We outline the kind of measurements that would be needed to demonstrate quantization of gravitational radiation and explain why these are substantially more difficult than simply counting graviton clicks or observing gravitational noise in an interferometer, and likely impossible to perform in practice. Published by the American Physical Society 2024

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distributed Inference with Sparse and Quantized Communication

Here, we consider the problem of distributed inference where agents in a network observe a stream of private signals generated by an unknown state, and aim to uniquely identify this state from a finite set of hypotheses. We focus on scenarios where communication between agents is costly, and takes place over channels with finite bandwidth. To reduce the frequency of communication, we develop a novel event-triggered distributed learning rule that is based on the principle of diffusing low beliefs on each false hypothesis. Building on this principle, we design a trigger condition under which an agent broadcasts only those components of its belief vector that have adequate innovation, to only those neighbors that require such information. We prove that our rule guarantees convergence to the true state exponentially fast almost surely despite sparse communication, and that it has the potential to significantly reduce information flow from uninformative agents to informative agents. Next, to deal with finite-precision communication channels, we propose a distributed learning rule that leverages the idea of adaptive quantization. We show that by sequentially refining the range of the quantizers, every agent can learn the truth exponentially fast almost surely, while using just 1 bit to encode its belief on each hypothesis. For both our proposed algorithms, we rigorously characterize the trade-offs between communication-efficiency and the learning rate.

42 ENGINEERING↗

SU-E-I-92: Is Photon Starvation Preventing Metal Artifact Reduction Algorithm From Working in KVCT?

Purpose: High density/high atomic number metallic objects create shading and streaking metal artifacts in the CT image that can cause inaccurate delineation of anatomical structures or inaccurate radiation dose calculation. A modified iterative maximum-likelihood polychromatic algorithm for CT (mIMPACT) that models the energy response of detectors, photon interaction processes and beam polychromaticity has successfully reduced metal artifacts in MVCT. Our extension of mIMPACT in kVCT did not significantly reduce metal artifacts for high density metal like steel. We hypothesize that photon starvation may result in the measured data in a commercial kVCT imaging beam. Methods: We measured attenuation of a range of steel plate thicknesses, sandwiched between two 12cm thick solid water blocks, using a Phillips Big Bore CTTM scanner in scout acquisition mode with 120kVp and 200mAs. The transmitted signal (y) was normalized to the air scan signal (y{sub 0}) to get attenuation [i.e., ln(y/y{sub 0})] data for a detector. Results: Below steel plate thickness of 13.4mm, the variations in measured attenuation as a function of view number are characterized by a quantum noise and show increased attenuation with metal thickness. On or above this thickness the attenuation shows discrete levels in addition to the quantum noise. Some views have saturated attenuation value. The histograms of the measured attenuation for up to 36.7mm of steel show this trend. The detector signal is so small that the quantization levels in the analog to digital (A-to-D) converter are visible, a clear indication of photon starvation. Conclusion: Photons reaching the kVCT detector after passing through a thick metal plate are either so low in number that the signal measured has large quantum noise, or are completely absorbed inside the plate creating photon starvation. This is un-interpretable by the mIMPACT algorithm and cannot reduce metal artifacts in kVCT for certain realistic thicknesses of steel hip implants. Moti Raj Paudel is supported by the Vanier Canada Graduate Scholarship, the Endowed Graduate Scholarship in Oncology and the Dissertation Fellowship at the University of Alberta. The authors acknowledge the CIHR operating grant number MOP 53254.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Blocker-tolerant and high-sensitivity $Δ$\!$Σ$ correlation digitizer for radar and coherent receiver applications

In this study, a coherent subsampling digitizer for pulsed Doppler radar systems is proposed. Prior to transmission, the radar system modulates the RF pulse with a known pseudorandom binary phase shift keying (BPSK) sequence. Upon reception, the radar digitizer uses a programmable sample-and-hold circuit to multiply the received waveform by a properly time-delayed version of the known a priori BPSK sequence. This operation demodulates the desired echo signal while suppressing the spectrum of all in-band noncorrelated interferers, making them appear as noise in the frequency domain. The resulting demodulated narrowband Doppler waveform is then subsampled at the IF frequency by a delta-sigma modulator. Because the digitization bandwidth within the delta-sigma feedback loop is much less than the input bandwidth to the digitizer, the thermal noise outside of the Doppler bandwidth is effectively filtered prior to quantization, providing an increase in signal-to-noise ratio (SNR) at the digitizer's output compared with the input SNR. In this demonstration, a delta-sigma correlation digitizer is fabricated in a 0.18-μm CMOS technology. The digitizer has a power consumption of 1.12 mW with an IIP3 of 7.5 dBm. The digitizer is able to recover Doppler tones in the presence of blockers up to 40 dBm greater than the Doppler tone.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗