Search NASA⌕ Search

SEARCH · Search NASA

Results for “red phosphorus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Stress- and interface-compatible red phosphorus anode for high-energy and durable sodium-ion batteries

Sodium-ion battery is a promising candidate for energy storage application, but the absence of high-capacity and low-cost anode materials significantly limit their practical specific energy and cost. Red phosphorus (RP) possesses a high theoretical specific capacity but suffers from large volume change, low electronic conductivity and unstable solid-electrolyte interphase (SEI). Herein, a hierarchical micro/nanostructured antimony-doped RP/carbon anode was developed, which demonstrate extraordinary electrochemical performance with high initial Coulombic efficiency of ~90%, high areal (~1.7 mAh cm-2) capacity together with good cycle stability and rate capability. Combined experimental and computational studies consistently revealed that such a unique structural design can dramatically accommodate the mechanical stress and moreover effectively restrain the undesired decomposition of electrolyte solvents regardless of electrolytes formulation, resulting in superior structural integrity and thin/robust SEI formation during cycling. The present finding has offered an alternative strategy for stress management and interface engineering on high-capacity alloying-based anode materials.

Liu, Xiang↗
DOE OSTI2022

Mechanochemistry of Phosphorus and Arsenic Alloys for Visible and Infrared Photonics

Incorporating few‐layer 2D phosphorus–arsenic alloys (PAs) into optoelectronic devices requires a synthesis technique that allows control of the alloy composition while producing volumes of material suitable for application development such as photodetectors, solar cells, and lasers. With that goal in mind, high‐energy ball milling allows production of both orthorhombic (o‐PAs) and trigonal (t‐PAs) alloys by reacting red phosphorus and metallic arsenic powders. The synthesis follows a two‐step process in which arsenic rapidly reacts with red phosphorus to first produce t‐PAs followed by a slower phase transformation into o‐PAs; synthesis time and overall conversion rate are slightly enhanced by the presence of arsenic. Optical measurements on exfoliated alloys at the few‐layer atomic limit of the 2D PAs reveal emission spanning from the visible (≈1.9 eV) into the near‐infrared region, covering a broad application space. Rapid powder synthesis within a closed system for stochiometric control of the solid‐solution PAs alloys combined with solution‐based exfoliation opens up opportunities for a whole new class of optoelectronic devices based on PA nanomaterials.

Pedersen, Samuel V.↗
DOE OSTI2020

Unravelling the mechanism of pressure induced polyamorphic transition in an inorganic molecular glass

The atomic structure of a germanium doped phosphorous selenide glass of composition Ge 2.8 P 57.7 Se 39.5 is determined as a function of pressure from ambient to 24 GPa using Monte-Carlo simulations constrained by high energy x-ray scattering data. The ambient pressure structure consists primarily of P 4 Se 3 molecules and planar edge shared phosphorus rings, reminiscent of those found in red phosphorous as well as a small fraction of locally clustered corner-sharing GeSe 4 tetrahedra. This low-density amorphous phase transforms into a high-density amorphous phase at ~6.3 GPa. The high-pressure phase is characterized by an extended network structure. The polyamorphic transformation between these two phases involves opening of the P 3 ring at the base of the P 4 Se 3 molecules and subsequent reaction with red phosphorus type moieties to produce a cross linked structure. The compression mechanism of the low-density phase involves increased molecular packing, whereas that of the high pressure phase involves an increase in the nearest-neighbor coordination number while the bond angle distributions broaden and shift to smaller angles. The entropy and volume changes associated with this polyamorphic transformation are positive and negative, respectively, and consequently the corresponding Clapeyron slope for this transition would be negative. This result has far reaching implications in our current understanding of the thermodynamics of polyamorphic transitions in glasses and glass-forming liquids.

42 ENGINEERING↗
DOE OSTI2020

Tailoring conductive networks within hollow carbon nanospheres to host phosphorus for advanced sodium ion batteries

The formidable sustainability challenges in advancing energy storage technologies call for game-changing research in battery designs. The previous pursuing of novel cathode materials with high redox potentials impedes the vast applications due to the simultaneous electrolyte decomposition at high potentials, though they are expected to deliver high specific capacities. Eventually, people start thinking in an opposite way, desirable anode materials with low redox potentials can also own high specific capacities. Among all the promising candidates, phosphorus-based anodes in sodium ion batteries (SIBs) have received considerable attention owing to the low cost and relatively high natural abundance of phosphorus. More importantly, phosphorus can store three sodium atoms and enable a high theoretical capacity of 2596 mAh g -1 , which overwhelms any other SIB anode currently available. However, the poor electronic conductivity and large volume change of phosphorus during cycling severely deteriorate battery performance. The most widely used strategy is to confine phosphorus within well-designed carbon hosts. Here, we thereby introduce a new type of porous hollow carbon with conductive-network interior as phosphorus host, which not only improves the electrical conductivity, but also creates enough interior surface for maximizing phosphorus utilization and shortening the ion's diffusion distance, compared to those conventional hollow carbon hosts. Therefore, the as-prepared red phosphorus-carbon spheres composites (RP/CS) exhibit superior rate performance (similar to 1083 mAh g -1 at 4 A g -1 , similar to 837 mAh g -1 even at 8 A g -1 ) and excellent cycle life (1027 mAh g -1 at 4 A g -1 more than 2000 cycles).

25 ENERGY STORAGE↗
DOE OSTI2020

A novel battery scheme: Coupling nanostructured phosphorus anodes with lithium sulfide cathodes

Lithium-ion batteries are approaching their theoretical limit and can no longer keep up with the increasing demands of human society. Lithium-sulfur batteries, with a high theoretical specific energy, are promising candidates for next generation energy storage. However, the use of Li metal in Li-S batteries compromises both safety and performance, enabling dendrite formation and causing fast capacity degradation. Previous studies have probed alternative battery systems to replace the metallic Li in Li-S system, such as a Si/Li2S couple, with limited success in performance. Recently, there is a focus on red P as a favorable anode material to host Li. In this work, we establish a novel battery scheme by utilizing a P/C nanocomposite anode and pairing it with a Li 2 S coated carbon nanofiber cathode. We find that red P anode can be compatible in ether-based electrolyte systems and can be successfully coupled to a Li 2 S cathode. Our proof of concept full-cell displays remarkable specific capacity, rate and cycling performances. We expect our work will provide a useful alternative system and valuable insight in the quest for next generation energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2021

Phosphorus speciation analysis of fatty-acid-based feedstocks and fast pyrolysis biocrudes via gel permeation chromatography inductively coupled plasma high-resolution mass spectrometry

Renewable feedstocks, such as lignocelulosic fast pyrolysis oils and both vegetable oil and animal fats, are becoming a viable alternative to petroleum for producing high-quality renewable transportation fuels. However, the presence of phosphorus-containing compounds, mainly from phospholipids, in these renewable feedstocks is known to poison and deactivate hydrotreating catalysts during fuel production. In this work, gel permeation chromatography (GPC) combined with inductively coupled plasma high-resolution mass spectrometry (ICP-HRMS) was used to analyze feedstocks including unprocessed soybean oil, animal fat, and pyrolysis oils from red oak and milorganite to identify phosphorus species. The results have shown the presence of a wide range of different phosphorous compounds among all the samples analysed in this work. The GPC-ICP-HRMS analyses of a vegetable oil and two animal fats have shown different fingerprints based on the molecular weight of each of the samples, highlighting the structural differences among their corresponding phosphorus-containing compounds. While the presence of low-molecular-weight species, such as phospholipids, was expected, several high-molecular-weight species (MW > 10 000 Da) have been found, suggesting that high-molecular-weight micelles or liposomes might have been formed due to the high concentration of phospholipids in these samples. Results obtained through the hydroxylation of a mix of phospholipids (asolectin) and its posterior GPC-ICP-HRMS agree with this hypothesis. With respect to the lignocellulosic catalytic fast pyrolysis oil samples, the GPC-ICP-HRMS results obtained suggest that either aggregation or polymerization reactions might have occurred during the pyrolysis process, yielding phosphorus-containing compounds with an approximate molecular weight above 91 000 kDa. In addition, an aggregation phenomenom has been observed for those phosphorus species present within the fast pyrolysis oils after being stored for 3 months, especially for those pyrolysis oils contaning pre-processed feedstocks, such as milorganite.

09 BIOMASS FUELS↗
DOE OSTI2020

Structural and Thermoelectric Properties of Black Arsenic–Phosphorus

Here, we report the structural and temperature dependent transport properties of As x P 1-x (x = 0, 0.2, 0.5, 0.83, 1) alloys. It is observed that black phosphorous (BP)-related phonon modes in the alloy samples are red-shifted with increasing arsenic concentration, while black arsenic-related modes in these samples are blue-shifted with increasing phosphorus concertation. As the arsenic concentration, x increases from 0 to 1, the 4-probe resistance of the As x P 1-x alloys is found to decrease by more than 3 orders of magnitude. The transport studies reveal that samples with the highest arsenic concentration (x = 1 and 0.83) show metallic behavior in the temperature dependence of resistance with a small thermopower at room temperature with an anomalous temperature dependence. In contrast, the samples with high phosphorus concentration (x = 0, 0.2, and 0.5) show very large thermopower values at room temperature reaching a value as high as 803 μV/k for x = 0.2. The temperature dependence of the thermopower of these samples can be well described by the variable range hopping (VRH) mechanism in two-dimensions (2-d), S ~ T 1/3 . Similarly, their 4-probe resistance (R) values can be fitted with 2-d VRH mechanism, R ~ exp(T -1/3 ).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Core-Level Spectroscopy with Hard and Soft X-rays on Phosphorus-Containing Compounds for Energy Conversion and Storage

The electronic properties of nine solid phosphorus (P)-containing compounds with varying oxidation states and chemical environments, including GaP (–III) , InP (–III) , red-P (0) , H 3 P (III) O 3 , Na 2 H 2 P 2 (IV) O 6 , H 3 P (V) O 4 , KH 2 P (V) O 4 , Na 2 HP (V) O 4 , and InP (V) O 4 , are investigated using X-ray absorption near-edge structure (XANES) spectroscopy in the hard (P K-edge) and soft X-ray regime (P L 2,3 - edge). We find shifts in the absorption-edge positions and correlate them with the ligands surrounding the P atom, likely causing a different core–hole interaction screening for different compounds. Complementing the experimental analysis, ab initio many-body calculations of XANES spectra provide insights into the excitonic nature of the observed spectral features and their impact on the electronic structure of the materials. Furthermore, we report on P K-edge XANES measurements on aqueous phosphorus-containing acids, including H 3 PO 3 , H 3 PO 4 , and their mixtures. At first sight, the spectra of the aqueous acids are similar to those of their solid counterparts. However, close inspection reveals a slight red shift of the absorption edge and the presence of fewer spectral features compared with spectra of the respective solids. Mixtures of aqueous acids display spectral features corresponding to the individual components, indicating the potential for speciation and quantification through fingerprinting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Taxonomic distribution of metabolic functions in bacteria associated with Trichodesmium consortia

The photosynthetic and diazotrophic cyanobacterium Trichodesmium is a key contributor to marine biogeochemical cycles in the subtropical-oligotrophic oceans. Trichodesmium form colonies that harbor a distinct microbial community in comparison to the surrounding seawater. The presence of their associated bacteria can expand Trichodesmium’s functional potential and is predicted to influence the cycling of carbon, nitrogen, phosphorus, and iron (C, N, P, and Fe). To link the bacteria associated with Trichodesmium to key functional traits and elucidate how community structure can influence nutrient cycling, we characterized Red Sea Trichodesmium colonies using metagenomics and metaproteomics. Colonies harbored bacteria that typically associate with algae and particles, such as the ubiquitous Alteromonas macleodii, but also lineages specific to Trichodesmium, such as members from the order Balneolales. The majority of associated bacteria were auxotrophic for different vitamins, indicating their dependency on vitamin production by Trichodesmium. The associated bacteria carry functional traits including siderophore biosynthesis, reduced phosphorus metabolism, and denitrification pathways. The analysis supports Trichodesmium as an active hotspot for C, N, P, Fe, and vitamin exchange. In turn, Trichodesmium may rely on associated bacteria to meet its high Fe demand as several lineages synthesize photolabile siderophores (e.g., vibrioferrin, rhizoferrin, petrobactin) which can enhance the bioavailability of particulate Fe to the entire consortium. Collectively, the results indicate that Trichodesmium colonies provide a structure where these interactions can take place. While further studies are required to clarify the exact nature of these interactions, Trichodesmium’s reliance on particle and algae-associated bacteria and the observed redundancy of key functional traits likely underpins the resilience of Trichodesmium within an ever-changing global environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Soft X-ray Emission Spectroscopy of Phosphorus Compounds for Energy Conversion and Storage

Phosphorus (P) is a ubiquitous component of materials for energy conversion and storage. Despite the effectiveness of soft X-ray emission spectroscopy (XES) to characterize these complex materials, XES studies of P-containing compounds are still largely missing. In this investigation, the electronic structure and XES signatures from the P L 2,3 -edge are probed for nine solid-state P-containing compounds characterized by various oxidation states and chemical environments: GaP (3−) , InP (3−) , red-P (0) , H 3 P (3+) O 3 , Na 2 H 2 P 2 (4+) O 6 , H 3 P (5+) O 4 , KH 2 P (5+) O 4 , Na 2 HP (5+) O 4 , and InP (5+) O 4 . The XES spectrum of each material exhibits distinct spectral fingerprints, which provide a robust basis for the speciation of complex P-containing samples. Density functional theory calculations shed light on the electronic structure of selected materials and particularly on the effect of phosphorus-oxygen hybridization. This study provides a comprehensive understanding of P L 2,3 XES spectral fingerprints across a wide range of oxidation states and chemical environments. These data sets and insights pave the way for dedicated future work, such as in situ and operando investigations of P-containing compounds in energy-related applications, where speciation of P compounds is needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemical Li Intercalation in Black Phosphorus: In Situ and Ex Situ Studies

A systematic study on electrochemical charge transfer in Li-doped black phosphorous (BP) was carried out by both in-situ and ex-situ Raman scattering. Galvanostatic discharge of dedicated in-situ electrochemical cell for Raman spectroscopy was used to study time evolution of vibrational modes under lithiation. In addition to the peak broadening which is a result of structural expansion, peaks corresponding to all three atomic vibrational modes A 1 g , B 2 g and A 2 g were found to red-shift as a result of lithiation. Peaks B 2 g and A 2 g were shifted about 1.6 times more towards lower wavenumbers in comparison to A 1 g . Further characterizations using optical and electron microscopy showed that the intercalation of BP is highly anisotropic, where channels along the zigzag direction were found to be the easy direction for intercalation. X-ray diffraction on intercalated samples confirmed a reduction of thickness as lithiation weakens interlayer bonding, thus resulting in a partial exfoliation of BP flakes. Here, first principle studies using density function theory (DFT) were used to develop a theoretical model for the intercalation mechanism. The discrepancy between the experimental and the theoretical results was also addressed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of nutritional history, prey quality, and quantity on grazing and photophysiological responses in the mixoplanktonic dinoflagellate Karenia brevis

The mixotrophic toxic dinoflagellate Karenia brevis forms red tides almost annually along Florida's Gulf coast. We hypothesize that the nutritional status and abundance of its prey, the picocyanobacterium Synechococcus , will affect its feeding rates and growth responses, with implications for bloom dynamics. This study investigated how prey nutritional quality and quantity (absolute and relative) impact grazing rates by K. brevis initially exponentially growing and in nitrogen (N)-limited conditions, and how grazing, in turn, affects the photophysiological responses of predator and prey. Prey quality was manipulated by providing Synechococcus grown under different ratios of N : phosphorus (P). Synechococcus quality did not significantly affect ingestion rates (measured as prey death rate) but grazing rates increased with increasing prey : grazer ratios (R 2 = 0.7). Compared to control, the growth of exponentially growing grazers doubled when Synechococcus was provided, whereas there was no growth enhancement when Synechococcus of varying qualities was provided to N-limited, chemostat-seeded grazers. Despite this doubled growth, 15 N labeling of the prey and nanoscale secondary ion mass spectrometry (nanoSIMS) detected low Synechococcus -N transfer into grazer biomass after 3 d (< 1% on a cell basis). This suggests the potential of grazers benefiting from alternative N sources (e.g., microbiome-N) or other constituents (e.g., vitamins or metals) not measured in this study. Prey photosynthetic efficiency declined under grazing conditions, demonstrating that grazers can directly affect prey abundance through grazing and indirectly affect prey photophysiology, potentially via allelopathy, supporting previous findings of an inverse relationship between grazers and prey along the Florida Gulf Coast.

Ahn, So Hyun [Univ. of Maryland, Cambridge, MD (Un↗
DOE OSTI2023

Large-scale efficient mid-wave infrared optoelectronics based on black phosphorus ink

The mid-wave infrared (MWIR), ranging from 2 to 5 micrometers, is of substantial interest for chemical sensing, imaging, and spectroscopy. Black phosphorus (bP)–based MWIR light emitters and detectors have been shown to outperform the state-of-the-art for commercial devices due to the low Auger recombination coefficient of bP. However, the scalability of these devices remains a challenge. Here, we report a bP ink formula that preserves the exceptional MWIR optoelectronic properties of bP to deposit centimeter-scale, uniform, and pinhole free films with a photoluminescence quantum yield higher than competing III-V and II-VI semiconductors with similar bandgaps at high excitation regime. As a proof of concept, we use bP ink as a “phosphor” on a red commercial light-emitting diode to demonstrate bright MWIR light emission. We also show that these films can be integrated into heterostructure device architectures with electron and hole selective contacts for direct-injected light emission and detection in MWIR.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Algae Biofilm Produced from Anaerobic Digester Wastewater Demonstrated as Biofertilizer for Dwarf Wheat

Aims: To correlate yield of dwarf wheat fertilized with algae biofilm produced using anaerobic digester effluent (digestate) from a municipal water resource recovery facility as nutrient source and compare with yield using non-algae biofilm based fertilizers and a negative control. Study Design: Greenhouse testing for measurement of biomass yields and statistical analysis of wheat yield data results. Place and Duration of Study: Department of Biological Engineering Algae Processing and Products Facility greenhouse between March and June, 2024. Methodology: Yield of a dwarf cultivar of red spring wheat was measured as a function of four treatments including three fertilizers and a negative control: (1) algae biofilm cultivated on anaerobic digester effluent, (2) positive control of Osmocote commercial slow release fertilizer, (3) anaerobic digester biosolids, and (4) negative control with no fertilizer addition. Results: Average yield values (gm) for the four treatments were: (1) 1.25, (2) 0.99, (3) 0.72, and (4) 0.52, respectively. Algae biofilm fertilizer performed significantly better than Osmocote with P = .002, anaerobic digester biosolids with P = .05, and no fertilizer addition with P = .05. Struvite, a slow release fertilizer, was observed to be associated with the algae biofilm as a precipitate of the high concentrations of nutrients within the anaerobic digester water. Struvite (MgNH4PO46H2O) releases plant available nitrogen and phosphorus over time and is biologically precipitated due to the increase in solution pH as a result of photosynthesis by the algae biofilm. Conclusion: Algae biofilm cultivated on anaerobic digester wastewater can serve as a biofertilizer for recycling nutrients within the biosphere for sustainable nutrient management.

09 BIOMASS FUELS↗