Search NASA⌕ Search

SEARCH · Search NASA

Results for “road link”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Marin County Wildfires Ii: Improving Fire Suppression Modeling to Inform Fire Prevention and Suppression Decisions in Marin County, Ca

A future of increased wildfires requires greater integration of spatial analysis and local knowledge of emergency responders. We examine the application of a Potential Operational Delineations (PODs) framework for strategic pre-fire planning in Marin County. PODs are spatial units for wildfire management that combine predictive modeling and local firefighter expertise to identify potential control locations as unit boundaries and assess the difficulty of suppression within units. Additionally, this project explores the integration of road networks and social vulnerability to assess environmental justice in evacuation safety. This project constitutes a novel application of the PODs framework as it integrates expertise from Marin County senior firefighters with a Fireline Location Model (FLM) to achieve POD definition and uses a Suppression Difficulty Score (SDS) to rank each POD. The FLM uses network analysis and hydrologic modeling to identify key roads and ridgelines as boundaries and combines them with expert knowledge, in the form of workshops, to construct PODs. Once identified, PODs are classified using SDS, which includes processed inputs such as LiDAR-derived aboveground biomass, ECOSTRESS Evaporative Stress Index, land use cover type from Sentinel-2 Imagery, and a digital elevation model. Environmental justice for evacuation safety incorporated three key road metrics such as connectivity, travel area, and exit capacity, the Social Vulnerability Index from the Center for Disease Control, and cell coverage to determine a final Evacuation Difficulty Score. Results indicate a strong link between road networks as primary POD boundaries, with ridgelines and waterways as secondary and tertiary locations. Specifically, we find 78.5% of expertise-identified POD boundaries align with FLM-determined boundaries. More validation is needed to support this process; however, initial results signal a feasible framework to integrate expertise and spatial analysis in local level strategic fire planning

Wildfire modeling↗

Masked Proportional Routing

Masked proportional routing is an improved procedure for choosing links between adjacent nodes of a network for the purpose of transporting an entity from a source node ("A") to a destination node ("B"). The entity could be, for example, a physical object to be shipped, in which case the nodes would represent waypoints and the links would represent roads or other paths between waypoints. For another example, the entity could be a message or packet of data to be transmitted from A to B, in which case the nodes could be computer-controlled switching stations and the links could be communication channels between the stations. In yet another example, an entity could represent a workpiece while links and nodes could represent, respectively, manufacturing processes and stages in the progress of the workpiece towards a finished product. More generally, the nodes could represent states of an entity and the links could represent allowed transitions of the entity. The purpose of masked proportional routing and of related prior routing procedures is to schedule transitions of entities from their initial states ("A") to their final states ("B") in such a manner as to minimize a cost or to attain some other measure of optimality or efficiency. Masked proportional routing follows a distributed (in the sense of decentralized) approach to probabilistically or deterministically choosing the links. It was developed to satisfy a need for a routing procedure that 1. Does not always choose the same link(s), even for two instances characterized by identical estimated values of associated cost functions; 2. Enables a graceful transition from one set of links to another set of links as the circumstances of operation of the network change over time; 3. Is preferably amenable to separate optimization of different portions of the network; 4. Is preferably usable in a network in which some of the routing decisions are made by one or more other procedure(s); 5. Preferably does not cause an entity to visit the same node twice; and 6. Preferably can be modified so that separate entities moving from A to B do not arrive out of order.

Wolpert, David↗

Tests to Determine the Adhesive Power of Passenger-Car Tires

The concept of the adhesive power of a tire with respect to the road involves several properties which result from the purpose of the tire; namely, connecting link between vehicle and road: (1) The tire must transfer the tractive and braking forces acting in the direction of travel (tractive and braking adhesion); (2) The tire is to prevent lateral deviations of the vehicle from the desired direction of travel (track adhesion). Moreover, the rubber tire provides part of the springing of the vehicle. Above all, it has to level out the minor road irregularities; thus it smoothes, as it were, the road and simultaneously reduces the noise of driving. The springing properties of the tire affect the adhesive power. The tests described below comprise a determination of the braking and track adhesion of individual tires. The adhesion of driven wheels has not been investigated so far.

Foerster, B.↗

Communications systems evolutionary scenarios for Martian SEI support

A set of architectures for the Mars-earth SEI space communications link is identified and characterized. A 'road map' is defined that illustrates the most logical and efficient evolutionary paths for the SEI Mars-earth link. The major features of the road map include three alternative evolutionary paths meeting the data rate requirements that may grow from 10 Mbps to 1 Gbps in the 2008-2025 time frame. All three paths begin with a Ka-band MRS-EST baseline link in 2000, and diverge from this baseline as time progresses.

Kwong, P. W.↗

Mangroves Cover Change Trajectories 1984-2020: The Gradual Decrease of Mangroves in Colombia

Awareness of the significant benefits of mangroves to human lives and their role in regulating environmental processes has increased during the recent decades. Yet there remains significant uncertainty about the mangrove change trajectories and the drivers of change at national scales. In Colombia, the absence of historical satellite imagery and persistent cloud cover have impeded the accurate mapping of mangrove extent and change over time. We create a temporally consistent Landsat-derived dataset using the LandTrendr algorithm to track the historical land cover and mangrove conversion from 1984-2020 across Colombia. Over this period, mangrove extent decreased by ~48.000ha (14% of total mangrove area). We find a gradual reduction of mangrove extent along the Pacific coast since 2004, whereas, in the Caribbean, mangrove cover declined around during 1984-1988 and also after 2012. Our time-series analysis matches with drivers of mangrove change at three local sites. For instance, hydroclimatic events, dredging activities, and high sediment loads transported by the rivers have collectively improved mangrove recovery in some sites. In contrast, human activities pressure linked to agricultural expansion and road construction have degraded mangroves. The transition from dense mangrove to other vegetation types is the most significant conversion affecting mangrove cover in Colombia, impacting an area of 38,469 ± 2,829 ha. We anticipate increased mangrove loss, especially along the Pacific coast, resulting from intensified human activity. Prioritization of conservation areas is needed to support local institutions, maintain currently protected areas, and develop strategies (e.g. payment for ecosystem services) to preserve one of the most pristine mangrove regions in the Western Hemisphere.

Landsat↗

Urban forms, physical activity and body mass index: a cross-city examination using ISS Earth Observation photographs

Johnson Space Center has archived thousands of astronauts acquired Earth images. Some spectacular images have been widely used in news media and in k-12 class room, but their potential utilizations in health promotion and disease prevention have relatively untapped. The project uses daytime ISS photographs to define city forms and links them to city or metropolitan level health data in a multicity context. Road connectivity, landuse mix and Shannon's information indices were used in the classification of photographs. In contrast to previous remote-sensing studies, which tend to focus on a single city or a portion of a city, this project utilized photographs of 39 U.S. cities. And in contrast to previous health-promotion studies on the built environment, which tend to rely on survey respondents' responses to evaluate road connectivity or mixed land use for a single study site, the project examined the built environments of multiple cities based on ISS photos. It was found that road connectivity and landuse mix were not statistically significant by themselves, but the composite measure of the Shannon index was significantly associated with physical activity, but not BMI. Consequently, leisure-time physical activity seems to be positively associated with the urban complexity scale. It was also concluded that unless they are planned or designed in advance, photographs taken by astronauts generally are not appropriate for a study of a single-site built environment nor are they appropriate for a study of infectious diseases at a local scale. To link urban built environment with city-wide health indicators, both the traditional nadir view and oblique views should be emphasized in future astronauts' earth observation photographs.

Lin, Ge↗

Lobed Mixer Optimization for Advanced Ejector Geometries

The overall objectives are: 1) to pursue analytical, computational, and experimental studies that enhance basic understanding of forced mixing phenomena relevant to supersonic jet noise reduction, and 2) to integrate this enhanced understanding (analytical, computational, and empirical) into a design-oriented model of a mixer-ejector noise suppression system. The work is focused on ejector geometries and flow conditions typical of those being investigated in the NASA High Speed Research Program (HSRP). The research will be carried out in collaboration with the NASA HSRP Nozzle Integrated Technology Development (ITD) Team, and will both contribute to, and benefit from, the results of other HSRP research. The noise suppressor system model that is being developed under this grant is distinct from analytical tools developed by industry because it directly links details of lobe geometry to mixer-ejector performance. In addition, the model provides a 'technology road map to define gaps in the current understanding of various phenomena related to mixer-ejector design and to help prioritize research areas. This report describes research completed in the past year, as well as work proposed for the following year.

Waitz, Ian A.↗

Landslide Mapping Along the Karnali Highway, Nepal using High-Resolution Imagery

The Karnali highway (Figure 1) is the only major transportation link that connects the remote Karnali region to the provincial capital in Province 6 of Nepal. This area becomes inaccessible by roads during every rainy season due to landslides. Despite the known landslide frequency, there have been no systematic landslide inventories conducted along this highway to date. Recent advancements in remote-sensing technologies have significantly increased our ability to map landslides of various sizes rapidly with less in situ surveys or human interaction. Landslide susceptibility, hazard and risk studies require a complete landslide inventory, which might only be possible from very high-resolution (VHR) and high-resolution (HR) imagery. Recent launch of Sentinel-2 in 2015 has provided free access to HR imagery enabling landslide detection at finer scales then what was possible with previous open source satellite imagery obtained from Landsat and ASTER. Satellites providing VHR imagery are commercially owned, expensive and not freely available expect for when disasters charter is activated. NextView licensing agreement, a partnership between the US government and US commercial vendors provides access to VHR imagery to federal agencies in support of scientific research [1]. This partnership provides access to VHR imagery obtained from the DigitalGlobe (DG) constellation which enables mapping of small landslides (< 100 m2). In this study, VHR imagery from DG and HR imagery from Sentinel-2 will be used to map landslides along the Karnali highway using a semi automatic method based on object-oriented analysis (OOA) to create most recent and up-to-date landslide inventory. The effectiveness of this remote sensing based landslide inventory to produce a susceptibility map and its predictive capacity will be tested.

landslide↗

K/Ka-band channel characterization for mobile satellite systems

Mobile satellite systems allow truly ubiquitous wireless communications to users anywhere and anytime. NASA's Advanced Communications Technology Satellite (ACTS) provides an ideal space-based platform for the measurement of K/Ka band propagation characteristics in a land mobile satellite application. Field tests conducted in Southern California during the first seven months of 1994 using JPL's ACTS Mobile Terminal (AMT) provided channel characterization data for the K/Ka-band link. A pilot tone was transmitted from a fixed station in Cleveland, Ohio through the satellite and downlinked at 20 GHz in the Southern California spot beam. The AMT was equipped with a narrow beam, high gain antenna which tracked the satellite in azimuth for a fixed elevation angle (46 degrees for this case). The field tests were conducted in three basic environments: clear line-of-sight (LOS) highways, lightly shadowed suburban, and heavily shadowed suburban. Preliminary results of these field tests indicate very little multipath for rural environments and for clear LOS links (as expected with a narrow beam antenna). Deep fades were experienced in shadowed areas, especially those where tree canopies covered the road.

Pinck, Deborah S.↗

Use of Very High-Resolution Optical Data for Landslide Mapping and Susceptibility Analysis Along the Karnali Highway, Nepal

The Karnali highway is a vital transport link and the only primary roadway that connects the remote Karnali region to the lowlands in Mid-Western Nepal. Every year there are reports of landslides blocking the road, making this area largely inaccessible. However, little effort has focused on systematically identifying landslides and landslide-prone areas along this highway. In this study, landslides were mapped with an object-based approach from very high-resolution optical satellite imagery obtained by the DigitalGlobe constellation in 2012 and PlanetScope in 2018. Landslides ranging from 10 to 30,496 sq.m were detected within a 3 km buffer along the highway. Most of the landslides were located at lower elevations (between 500–1500 m) and on steep south-facing slopes. Landslides tended to cluster closer to the highway, near drainage channels and away from faults. Landslides were also most prevalent within the Kuncha Formation geologic class, and the forested and agricultural land cover classes. A susceptibility map was then created using a logistic regression methodology to highlight patterns in landslide activity. The landslide susceptibility map showed a good prediction rate with an area under the curve (AUC) of 0.90. A total of 33% of the study arealies in high/very high susceptibility zones. The map highlighted the lower elevated areas between Bangesimal and Manma towns with the Kuncha Formation geologic class as being the most hazardous. The banks of the Karnali River, its tributaries and areas near the highway were also highly susceptible to landslides. The results highlight the potential of very high-resolution optical imagery for documenting detailed spatial information on landslide occurrence, which enables susceptibility assessment in remote and data scarce regions such as the Karnali highway.

Pukar Amatya↗

Improved All-Terrain Suspension System

Redesigned suspension system for all-terrain vehicle exhibits enhanced ability to negotiate sand and rocks. Improved six-wheel suspension system includes only two links on each side. Bogie tends to pull rear wheels with it as it climbs. Designed for rover vehicle for exploration of Mars, also has potential application in off-road vehicles, military scout vehicles, robotic emergency vehicles, and toys. Predecessors of suspension system described in "Articulated Suspension Without Springs" (NPO-17354), "Four-Wheel Vehicle Suspension System" (NPO-17407), and "High-Clearance Six-Wheel Suspension" (NPO-17821).

Bickler, Donald B.↗

Coupled Land Atmosphere Predictability

We have designed and executed a set of predictability experiments, designed around the driest and wettest June soil moisture anomalies from a CCM3 simulation forced by observed SST for the period from 1958 through 1998. Each set contains an ensemble of five runs, all begun on June I radiation date. One set of these experiments helps to assess the extent to which the wet or dry conditions depend solely on the initial state of the atmosphere. The other set of experiments helps to assess the extent to which the wet or dry conditions depend sole on the initial state of the land surface. Preliminary analysis of these experiments suggests that the initial atmospheric state is more important than the initial state of the surface soil moisture in predicting the occurrence of wet or dry periods. These results suggest that when the atmosphere is inclined to generate dry surface conditions (through reduced moisture availability and increased evaporation) it matters little what initial levels of soil water are at; the soil will rapidly dry out. The ensemble forcing the ensembles with dry soil conditions, but utilizing 'normal' atmospheric conditions show little if any indication of the sharp reduction in soil moisture experienced in the control, indicating that the 'normal' atmospheric state is more important than the initial state of the soil moisture in predicting the occurrence of drought. Our work to date has documented the response of surface hydrologic variability, particularly over North America, to atmospheric forcing. While we have seen some suggestion that pre-existing surface anomalies can affect atmospheric circulation over this region, by far the strongest signal is the atmospheric anomalies leading those of soil moisture and surface energy balance changes. This is not an unexpected result since wintertime NA precipitation links to remote atmospheric forcing by ENSO are known to be statistically significant. While warm season links to remote forcing are more tenuous and not well explored, the present results encourage us to examine in more detail the SST forcing from the tropical and North Pacific.

Roads, John↗

Integrated Microphotonic Receiver for Ka-Band

This report consists of four main sections. Part I: LiNbO3 microdisk resonant optical modulator. Brief review of microdisk optical resonator and RF ring resonator. Microwave and photonic design challenges for achieving simultaneous RF-optical resonance are addressed followed by our solutions. Part II: Experimental demonstration of LiNbO3 microdisk modulator performance in wired and wireless RF-optical links. Part III: Microphotonic RF receiver architecture that exploits the nonlinear modulation in the LiNbO3 microdisk modulator to achieve direct photonic down-conversion from RF carrier without using any high-speed electronic elements. Part IV: Ultimate sensitivity of the microdisk photonic receiver and the future road map toward a practical device.

Levi, A. F. J.↗

Particle Engulfment and Pushing by Solidifying Interfaces: USMP-4 One Year Report

The experiment Particle Pushing and Engulfment by Solidifying Interfaces (PEP) was conducted during the USMP-4 (United States Microgravity Payload-4) mission on board the shuttle Columbia in November 1997. This experiment has its place within the framework of a long-term scientific effort to understand the physics of particle pushing. The first flight experiment of this kind was performed with a metal matrix composite on board STS-78 in the summer of 1996. The use of opaque matrices limits the evaluation to pre-and post-flight comparison of particle locations within the sample. By using transparent matrices the interaction of one or multiple particles with an advancing solid/liquid (SL) interface can be studied in-situ. If this observation can then directly be transmitted from the orbiter to the scientists by video down-link, a real-time execution of the experiment is possible in a micro-gravity environment. Part of this experiment was an extensive training of the payload specialists to perform the experiment in orbit. This was further enhanced by the availability of video down-link and direct communication with the astronauts. Even though the PEP experiment is aimed at understanding the interaction of a liquid/solid interface with insoluble particles and thus is fundamental in scope, the prospective applications are not. Possible applications range from improved metal matrix composites to understanding and preventing frost heaving affecting roads.

Stefanescu, D. M.↗

Future ultra-speed tube-flight

Future long-link, ultra-speed, surface transport systems will require electromagnetically (EM) driven and restrained vehicles operating under reduced-atmosphere in very straight tubes. Such tube-flight trains will be safe, energy conservative, pollution-free, and in a protected environment. Hypersonic (and even hyperballistic) speeds are theoretically achievable. Ultimate system choices will represent tradeoffs between amoritized capital costs (ACC) and operating costs. For example, long coasting links might employ aerodynamic lift coupled with EM restraint and drag make-up. Optimized, combined EM lift, and thrust vectors could reduce energy costs but at increased ACC. (Repulsive levitation can produce lift-over-drag l/d ratios a decade greater than aerodynamic), Alternatively, vehicle-emanated, induced-mirror fields in a conducting (aluminum sheet) road bed could reduce ACC but at substantial energy costs. Ultra-speed tube flight will demand fast-acting, high-precision sensors and computerized magnetic shimming. This same control system can maintain a magnetic 'guide way' invariant in inertial space with inertial detectors imbedded in tube structures to sense and correct for earth tremors. Ultra-speed tube flight can complete with aircraft for transit time and can provide even greater passenger convenience by single-model connections with local subways and feeder lines. Although cargo transport generally will not need to be performed at ultra speeds, such speeds may well be desirable for high throughput to optimize channel costs. Thus, a large and expensive pipeline might be replaced with small EM-driven pallets at high speeds.

Salter, Robert M.↗

STRIPE: Remote Driving Using Limited Image Data

Driving a vehicle, either directly or remotely, is an inherently visual task. When heavy fog limits visibility, we reduce our car's speed to a slow crawl, even along very familiar roads. In teleoperation systems, an operator's view is limited to images provided by one or more cameras mounted on the remote vehicle. Traditional methods of vehicle teleoperation require that a real time stream of images is transmitted from the vehicle camera to the operator control station, and the operator steers the vehicle accordingly. For this type of teleoperation, the transmission link between the vehicle and operator workstation must be very high bandwidth (because of the high volume of images required) and very low latency (because delayed images can cause operators to steer incorrectly). In many situations, such a high-bandwidth, low-latency communication link is unavailable or even technically impossible to provide. Supervised TeleRobotics using Incremental Polyhedral Earth geometry, or STRIPE, is a teleoperation system for a robot vehicle that allows a human operator to accurately control the remote vehicle across very low bandwidth communication links, and communication links with large delays. In STRIPE, a single image from a camera mounted on the vehicle is transmitted to the operator workstation. The operator uses a mouse to pick a series of 'waypoints' in the image that define a path that the vehicle should follow. These 2D waypoints are then transmitted back to the vehicle, where they are used to compute the appropriate steering commands while the next image is being transmitted. STRIPE requires no advance knowledge of the terrain to be traversed, and can be used by novice operators with only minimal training. STRIPE is a unique combination of computer and human control. The computer must determine the 3D world path designated by the 2D waypoints and then accurately control the vehicle over rugged terrain. The human issues involve accurate path selection, and the prevention of disorientation, a common problem across all types of teleoperation systems. STRIPE is the only semi-autonomous teleoperation system that can accurately follow paths designated in monocular images on varying terrain. The thesis describes the STRIPE algorithm for tracking points using the incremental geometry model, insight into the design and redesign of the interface, an analysis of the effects of potential errors, details of the user studies, and hints on how to improve both the algorithm and interface for future designs.

REMOTE CONTROL↗

Surface Soil Changes Following Selective Logging in an Eastern Amazon Forest

In the Brazilian Amazon, selective logging is second only to forest conversion in its extent. Conversion to pasture or agriculture tends to reduce soil nutrients and site productivity over time unless fertilizers are added. Logging removes nutrients in bole wood, enough that repeated logging could deplete essential nutrients over time. After a single logging event, nutrient losses are likely to be too small to observe in the large soil nutrient pools, but disturbances associated with logging also alter soil properties. Selective logging, particularly reduced-impact logging, results in consistent patterns of disturbance that may be associated with particular changes in soil properties. Soil bulk density, pH, carbon (C), nitrogen (N), phosphorus (P), calcium (Ca), magnesium (Mg), potassium (K), iron (Fe), aluminum (Al), delta(sup 3)C, delta(sup 15)N, and P fractionations were measured on the soils of four different types of loggingrelated disturbances: roads, decks, skids, and treefall gaps. Litter biomass and percent bare ground were also determined in these areas. To evaluate the importance of fresh foliage inputs from downed tree crowns in treefall gaps, foliar nutrients for mature forest trees were also determined and compared to that of fresh litterfall. The immediate impacts of logging on soil properties and how these might link to the longer-term estimated nutrient losses and the observed changes in soils were studied.

Olander, Lydia P.↗

Remote sensing of tree attenuation at 870 MHz along simulated Earth-satellite paths

Tree attenuation at 870 MHz was studied using a helicopter as a source platform and a van with receiver and data acquisition instrumentation. Tree attenuation results were obtained with the van stationary and in motion to determine land mobile satellite systems link parameter requirements (expected fading due to roadside trees for mobile and stationary vehicles). Single tree attenuation results give worst case median fades as high as 15 dB although roadside tree values produce fades greater than 20 dB for small percentages of time. The cumulative fade distributions and their relative contributions as a function of path elevation angle, right side versus left side driving, and different road types are derived from the field measurements.

Vogel, W. J.↗