SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since January 2025 are reviewed.
Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined and new entries since July 2025 are reviewed.
Here, consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since July 2024 are reviewed.
Abstract The efficiency potential for single‐junction photovoltaics (PV) is described by the detailed balance model, which requires the elimination of nonradiative recombination and perfect minority carrier collection. Improvements in GaAs, Si, and perovskite PV follow this model. It might be more complex for CdTe, a leading thin‐film PV technology. While lifetime, passivation, and doping goals for 25% efficient CdTe solar cells are largely reached, voltage is ≈20% below the detailed balance limit. Why is that? In Se‐alloyed CdSe x Te 1‐x (Se is required for >20% efficiency) additional losses can occur due to electrostatic and bandgap fluctuations and due to electronic trap states. To understand mechanisms limiting CdSeTe solar cell performance and to suggest improvements, carrier dynamics, and transport in CdSe x Te 1‐x with variation in Se composition and as doping is analyzed. It is shown that trapping, likely due to anion‐site defects and their complexes, is correlated with low charge carrier mobility of 0.1–0.6 cm 2 (Vs) −1 . Even with 1000 ns charge carrier lifetimes, carrier diffusion length is less than the absorber thickness, reducing efficiency to ≈23%. Device simulations are used to analyze the performance of CdSe x Te 1‐x solar cells; thermodynamic models are not sufficient for absorbers with electronic disorder and trapping.
Halide perovskite solar cells with mixed-cation compositions often face instabilities under continuous illumination due to the deprotonation of methylammonium (CH 3 NH 3 + , MA + ) cations. Here, to address this, we systematically evaluate the partial and complete deuteration of MA + cations. This approach inhibits deprotonation and degradation, reduces the formation energy of the perovskite phase, improves grain growth, passivates defects, and restrains ion migration. As a result, perovskite solar cells incorporating this deuteration strategy achieve exceptional performance, including a high fill factor (FF) of 82.6% and a power conversion efficiency (PCE) of 25.6%. Their modules with a device area of 56 cm 2 demonstrate remarkable stability, maintaining over 93.7% of their initial PCE after 1,000 h at the maximum power point under continuous illumination at 40°C. This novel deuteration strategy presents a promising approach to enhance both the efficiency and stability of perovskite solar cells.
Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for photovoltaic solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since January 2026 are reviewed.
Doping is used in many pn junction devices, such as polycrystalline solar cells, to increase the strength of the junction field to assist charge carrier collection and thus partially mitigate nonradiative recombination losses. We demonstrate a different doping characteristic for inorganic solar cells: using dopants to reduce charge carrier trapping and electronic band tails. Alloying CdTe with Se to form CdSeTe semiconductor reduced recombination, but CdSeTe has more complex defect states which can limit further efficiency gains due to charge carrier trapping and trap-limited mobility. Doping CdSeTe with P (but not N, As, or Sb in this study) reduces band tails (Urbach energies) and lessens the impact of the near valence band trap states, with ambipolar mobilities improving to >50 cm 2 V −1 s −1 , fill factor increasing from 76% to 79%, and efficiencies increasing by 0.9% absolute. Simulations are used to show how such defect reduction improves performance in the radiative limit.
Two-dimensional (2D) perovskites are promising for photovoltaic applications due to their outstanding optical properties and better environmental stability compared to three-dimensional (3D) perovskites. Unlike 2D Ruddlesden–Popper (RP) perovskites, which use monovalent ammonium spacers, Dion–Jacobson (DJ) perovskites employ divalent organic spacers that enhance structural stability by mitigating weak van der Waals interactions. However, the random phase distribution and disorder crystal orientation in 2D DJ perovskites create deep quantum wells, hindering charge transfer and reducing short-circuit current density (J SC ) and overall photovoltaic performance. This study introduces an organic diammonium, 1,4-butanediamine diacetate (BDAAc 2 ), to replace the traditional halide spacer 1,4-butanediamine iodide (BDADI 2 ). This substitution regulates perovskites crystallization dynamics, reducing compositional disorder and random phase distribution, thus improving the quality of the perovskite films. The robust coordination interactions between BDAAc 2 and the perovskite inorganic framework lead to an ordered [PbX 6 ] 4− arrangement, suppressing the formation of complex intermediate phases and significantly enhancing δ phase crystallinity in the intermediate film. This results in a high yield of high-quality α phase. Consequently, the resulting 2D DJ perovskite solar cells based on BDAFA 3 Pb 4 (I 0.9 Br 0.1 ) 13 achieve a higher power conversion efficiency of 16.41% and an elevated J SC of 20.46 mA cm −2 .
Open-circuit voltage deficits are limiting factors in kesterite solar cells. Addressing this issue by suppressing band tailing and nonradiative charge recombination is essential for enhancing the performance. We employ ab initio nonadiabatic molecular dynamics to elucidate the origin of band tailing and charge losses and propose a mitigation strategy. The simulations show that Cu–Zn disorder, associated with antisite defect clusters [Cu Zn +Zn Cu ], is a significant source of band tailing in kesterites, as evidenced by the much larger Urbach energy in disordered than ordered kesterites. Cu–Zn disorder gives rise to new sulfur-centered coordination polyhedra, increases structural inhomogeneity, changes electrostatic potential at sulfur centers, and shifts the S(3p) orbital energy. Differences in the S(3p)/Cu(3d) and S(3p)/Sn(5s) hybridization strengths and the S(3p) orbital energy shift reduce the band gap by 0.37 eV. Furthermore, Cu–Zn disorder enhances vibrational motion of sulfur anions and surrounding cations, increasing band gap fluctuations by 15 meV. The stronger electron–phonon interactions reduce charge carrier lifetimes and limit the kesterite solar cell efficiency. Partial substitution of Zn with Cd facilitates structural ordering and significantly suppresses band tailing, particularly in disordered systems. The improvement can be attributed to the larger atomic radius and mass of Cd, which weakens bonding around the anion, suppresses S-related vibrations within the covalent tetrahedra, and reduces nonadiabatic coupling, thereby increasing charge carrier lifetimes. The reported results establish the key influence of cation disorder on band tailing and reduced charge carrier lifetimes in kesterites and highlight cation disorder engineering as a strategy to achieve high-efficiency kesterite solar cells.
The project, High-Efficiency Recycled Silicon Solar Cell, addresses the critical challenge of end-of-life (EoL) photovoltaic (PV) waste, which is expected to reach 78 million tons by 2050. Traditional recycling methods for recovering valuable materials like silver from silicon solar cells are inefficient, environmentally harmful, and economically unfeasible. Therefore, presently waste solar cells end up as landfills. This project aimed to develop a green, scalable, laser-based method for silver recovery, avoiding hazardous chemicals and minimizing operational costs. This research contributes to the circular economy in the renewable energy sector by enhancing material recovery from PV waste.
Here, we report simple and potentially low-cost techniques for creating high-quality n-type gallium arsenide (GaAs) and GaAs p/n junctions and fabricate GaAs p/n junction solar cells. Detailed-balance modeling suggests that 20% AM1.5G efficiency p/n homojunction devices may be possible if the surface doping concentration can be limited to values less than ∼ 5 × 10 19 cm −3 . Our process exploits an open-tube, vapor-phase, deposition-free, zinc diffusion technique for forming p-type layers in melt-grown n-GaAs substrates that results in sheet resistances less than 1 kΩ/$\square$. In addition, we have improved the minority carrier diffusion lengths of melt-grown GaAs from less than one micron to over five microns using an open-tube, vacuum-free, annealing process which reduces the density of EL2 midgap defects. Finally, we have combined these advances to fabricate epitaxy-free, GaAs solar cells with a validated AM1.5G efficiency of 15.3%.
Photonic curing (PC) can facilitate high-speed perovskite solar cell (PSC) manufacturing because it uses high-intensity light pulses to crystallize perovskite films in milliseconds. However, optimizing PC conditions is challenging due to its many variables, and using power conversion efficiency (PCE) as the optimization metric is both time-consuming and labor-intensive. This work presents a machine learning (ML) approach to optimize PC conditions for fabricating methylammonium lead iodide (MAPbI 3 ) films by quantitatively comparing their ultraviolet-visible (UV-vis) absorbance spectra to thermal annealed (TA) films using four similarity metrics. We perform Bayesian optimization coupled with Gaussian process regression (BO-GP) to minimize the similarity metrics. Refining PC conditions using active learning based on BO-GP models, we achieve a PC MAPbI3 film with an absorbance spectrum closely matching a TA reference film, which is further verified by its crystalline and morphological properties. Thus, we demonstrate that the UV-vis absorption spectrum can accurately proxy film quality. Additionally, we use an AI-based segmentation model for a more efficient grain size analysis. However, when we use the optimized PC condition to fabricate PSCs, we find that interaction between MAPbI 3 and the hole transport layer (HTL) during PC critically degrades the PSC performance. By adding a buffer layer between the HTL and MAPbI 3 , the optimized PC PSCs produce a champion PCE of 11.8%, comparable to the TA reference of 11.7%. Using UV-vis similarity metrics instead of device PCE as the objective in our BO-GP method accelerates the optimization of PC processing conditions for MAPbI 3 films.
Carbon-electrode-based perovskite solar cells (C-PSCs) have emerged as a cost-effective and scalable alternative to noble-metal-based PSCs, addressing critical challenges related to device stability, fabrication complexity, and commercialization potential. This review explores the recent progress in C-PSC development, focusing on the benefits of carbon electrodes (CEs), including their hydrophobicity, chemical inertness to halide corrosion, and compatibility with low-temperature cost-effective solution-based deposition methods. Despite relatively lower power conversion efficiencies (PCEs) than their metal (e.g., Au/Ag) counterparts, recent advances in carbon paste formulation, interfacial contact engineering, and work function modification have elevated C-PSC efficiencies above 22%. This review further examines strategies to enhance electrode conductivity, interfacial properties, and charge selectivity to further increase C-PSC performance. Progress in carbon-electrode-based perovskite solar modules (C-PSMs), particularly within mesoporous and planar architectures, is also analyzed, revealing significant developments in active area scaling and long-term stability. Notably, the limited research in inverted (PIN) C-PSCs is also highlighted as a compelling opportunity for innovation, given the architecture's inherent advantages in flexibility, tandem integration, and low-temperature processing. Collectively, these insights affirm the potential of C-PSCs and C-PSMs to deliver affordable, stable, and high-performance photovoltaics suitable for scalable deployment.
In this study, we report high-performance perovksite solar cells (PSCs) with rapid photonic annealing (RPA) of all stacking layers, enabled by ultraviolet (UV) light-emitting diode (LED) sources, to replace lengthy and energy-intensive thermal annealing (TA). The UV-LED annealing technique allows for layer-specific annealing, where the selected light source provides a precise UV wavelength for maximizing the amount of light absorption by the target layer. The disparity in optical absorption between the target layer and the underlying films allows the stack of the underlying films to remain relatively unaffected, making this process ideal for heating sensitive substrates. Along with a systematic investigation into the layer-specific annealing mechanism of RPA, the results demonstrated that this UV-LED-based photonic annealing of all stacking layers (7 s for perovskite absorber) can produce PSCs with the power conversion efficiency (PCE) of over 23%, the highest reported among optically annealed PSCs. Moreover, the RPA device retains over 80% of the initial PCE over 1000 h under continuous 1 sun illumination at 55 °C and 30%–60% relative humidity (RH), while TA control device drops to 50% of its initial efficiency. Furthermore, these findings represent significant strides toward achieving rapid, cost-effective, and scalable manufacturing of commercial perovskite photovoltaics (PV).
This project developed and demonstrated Sonic Lift-off, a novel technology that enables the reuse of expensive semiconductor substrates used to manufacture high-efficiency solar cells. By using sound waves to precisely separate thin layers of material, the process significantly reduces manufacturing costs while maintaining the performance of advanced III–V solar cells. These solar cells are among the most efficient in the world and are used in space, aerospace, and emerging terrestrial applications. The results of this work show that substrate reuse can be achieved without degrading device performance, offering a pathway to more affordable, high-performance solar technologies. This advancement supports U.S. clean energy goals by enabling broader deployment of renewable energy systems and strengthening domestic manufacturing capabilities in advanced photovoltaics.
Explore the source record for details and available documents.
Not Available
The power conversion efficiency of organic solar cells (OSCs) is exceeding 20%, an advance in which morphology optimization has played a significant role. It is generally accepted that the processing solvent (or solvent mixture) can help optimize morphology, impacting the OSC efficiency. Here we develop OSCs that show strong tolerance to a range of processing solvents, with all devices delivering high power conversion efficiencies around 19%. By investigating the solution states, the film formation dynamics and the characteristics of the processed films both experimentally and computationally, we identify the key factors that control morphology, that is, the interactions between the side chains of the acceptor materials and the solvent as well as the interactions between the donor and acceptor materials. Our work provides new understanding on the long-standing question of morphology control and effective guides to design OSC materials towards practical applications, where green solvents are required for large-scale processing.