Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectroscopic reflectance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Relation of the spectroscopic reflectance of olivine to mineral chemistry and some remote sensing implications

High-resolution visible and near-IR diffuse spectral reflectance are used to systematically investigate apparent wavelength shifts as a function of mineral chemistry in the Fe/Mg olivine series from Fo(11) to Fo(91). The study also shows that trace amounts of nickel can be spectrally detected in the olivine structure. Significant compositional information can only be extracted at relatively high resolution, because the overall spectral characteristics of the olivines change only subtly as a function of the Fe/Mg ratio. This laboratory study is expected to aid in the interpretation of remotely sensed data from both terrestrial and extraterrestrial bodies. Terrestrial applications may include the recognition of ultramafic, ultrabasic, and basaltic terrains which in themselves may have mineral potential. Among extraterrestrial applications, the asteroids are obvious candidates for further examination. Some permutations of Fe-Mg-Ni relations in olivines are discussed as they apply to the interpretation of asteroid surfaces and other extraterrestrial bodies.

King, Trude V. V.↗
DOE OSTI2022

Determining Infrared Optical Constants for Dolomite using Single Angle Reflectance and Spectroscopic Ellipsometry

The optical constants, namely the real (n) and imaginary (k) parts of the complex refractive index, are of particular interest to generate the infrared (IR) spectra of liquid and solid materials in different morphologies. To obtain n/k, however, most materials are typically not found in the monolithic forms necessary to easily measure n/k, and thus require the use of other methods such as pressing powders to form planar, specularly-reflective pellets. In this work dolomite crystals are measured using fixed-angle IR reflectance spectroscopy in both 1) a monolithic form with the crystal fixed in epoxy and polished, but data are also recorded from 2) pressed-pellet forms of powders of the same mineral using the same spectroscopic protocols. First results for the two methods are compared. It was found that the measured reflectance can vary by as much as a factor of two between the dolomite crystals and the pressed powder forms. For the two-sample preparation approaches the preliminary spectra are compared and the implications and limitations of each method for determining the optical constants of given materials are discussed. Comparison to literature data suggest that polarization effects likely account for the differing amplitude results for reflectance (and hence the k -vectors): Dolomite is known to be biaxial with significantly differing ordinary and extraordinary rays; the pressed pellet method measures an ensemble of microcrystals in randomly oriented positions, whereas the single crystal maintains just one orientation relative to the optical axis.

ellipsometry, dolomite, complex refractive index, ↗
DOE OSTI2025

Improving Surface Quality of Titanium Electrodeposition from a Deep Eutectic Solvent with Organic and Inorganic Additives

Titanium electroreduction is desired for a variety of medical, electronic, and bonding applications but has not been possible until recently. Titanium electrodeposition with leveler and brightener additives in the deep eutectic solvent ethaline has been studied for effects on spectroscopic reflectance. Polymeric leveling agents and several small‐molecule brighteners produce level/bright films (respectively) with high values for both specular and diffuse reflectance. The application of these leveling and brightening agents can produce films with appearances and surface roughnesses that may be suitable for application in medical implants such as stents, corrosion protection of electronics for wearable technology, and as interlayers between dissimilar metals.

deep eutectic solvents↗
NASA NTRS2019

Spectroscopic Behavior of Composite, Black Thermal Paint, Solar Cell, and Multi-Layered Insulation Materials in a GEO Simulated Environment

The population of objects orbiting Earth is dominated by orbital debris. The following study presents reflectance spectroscopic measurements and bidirectional reflectance distribution function (BRDF) evaluations taken on common spacecraft materials (Table 1), some of which are likely candidates in the orbital debris population. Their optical properties were assessed in their pristine conditions, as well as after exposure in a space environmental chamber used to simulate space weathering. The materials studied will prove that they have excellent properties in resisting the effects of damage that are common in both low Earth orbit and geosynchronous Earth orbit (GEO) based on the research discussed in this work.

Reyes, Jacqueline A.↗
NASA NTRSDate not supplied

Spectral Characterization of Spacecraft Materials used in Hypervelocity Impact Testing

The increasing number of successfully deployed space missions have resulted in an increased density of man-made objects positioned in orbital domains near Earth. With this steady accumulation of objects in space, it is becoming more imperative to characterize spacecraft materials, which may ultimately be contributors to the orbital debris population. In order to ascertain the potential damage from orbital debris, a laboratory hypervelocity impact test was conducted using a 56-kg modern spacecraft representative satellite (DebriSat) to simulate a catastrophic fragmentation event in low Earth orbit. In an effort to identify unique, material-specific spectroscopic markers, a select number of the spacecraft materials used to construct DebriSat were analyzed using reflectance spectroscopy as a characterization technique for assessment on material type according to optical features. Spectral measurements of DebriSat materials analyzed prior to the laboratory impact are presented in this paper. These data provide a spectral characterization baseline for modern-day spacecraft materials in their pristine conditions and are compared to each other to distinguish spectra of materials belonging to different classifications with an effort of grouping them using color index. The ongoing efforts to classify materials utilizing their reflectance spectroscopic fingerprint are discussed in this study

Jacqueline A. Reyes↗
NASA NTRS1981

Far-UV, visible, and near-IR reflectance spectra of frosts of H2O, CO2, NH3 and SO2

Measurements in the 0.1-2.5 micron range are presented for the reflectance spectra of the frosts of several volatiles pertinent to the study of comet nuclei. The frost spectra have distinctive features permitting their identification by spectroscopic reflectance remote sensing, notably in the far UV. It is found that: (1) H2O has a minimum at 0.16 microns and a maximum at 0.13 microns; (2) CO2 has minima near 0.21, 0.18 and 0.125 microns, with maxima at 0.19, 0.135 and 0.120 microns; (3) NH3 is bright at wavelengths longer than 0.21 microns, where reflectance drops to a value of only a few per cent at shorter wavelengths; (4) SO2 has a sharp drop at 0.32 microns, with a minimum at 0.18 microns and a maximum at 0.13 microns. The features in the frost spectra largely correspond to absorption line bands in the gas phase.

Hapke, B.↗
NASA NTRS1987

Martian surface analogs: Laboratory spectral studies in the mid infrared

Ground-based telescopic reflectance spectra and analyses of Viking data have led to the conclusion that Martian surface fines are derived from a mafic to ultramafic source material, though the actual composition of these surface fines is still undetermined. A variety of possible compositions were proposed by several authors, however, with salts, particularly sulfates and carbonates, as important components in many of these models. Although salts are predicted components of the Martian surface, they are not identified in telescopic reflectance spectroscopic observations to date. One explanation for the absence of salts in these data is that they are not in quantities large enough to detect. This study was undertaken to determine the detectability of salts in various proposed Martian surface analog mixtures. This study concentrates on the carbonates and sulfate spectral features in the 2.5 to 25 micrometer spectral range because of recent work showing the usefulness of weak bands in the mid infrared for the remote sensing of particulate planetary surfaces. All measurements were made using a Nicolet 5SXC FTIR spectrometer with a bidirectional reflectance attachment, which uses an aluminum mirror as the background against which the sample is compared.

Walsh, P. A.↗
DOE OSTI2022

Alternating chempolishing and electropolishing for interior and exterior surface finishing of additively manufactured (AM) metal components

Additively manufactured (AM) components’ surface finishing is crucial in adopting them for intended applications in challenging environments involving fatigue, corrosion, high temperature, and nuclear radiation. In our prior research, chempolishing (C) was utilized as an electroless etching process that uniformly smoothens complex AM components’ accessible interior and exterior surfaces (Tyagi et al. Additive Manufacturing, 25:32–38, 22). A wide range of electropolishing (E) has been demonstrated for AM surface finishing. However, electropolishing can impact a surface that can be juxtaposed to counter electrode and can yield a very smooth surface to sub-micrometer level roughness. However, a knowledge gap exists about the impact of applying both approaches on the same surface one after another and what new advantages may arise because of combining two methods. This paper uses dual-stage liquid-based surface finishing strategies produced by alternating the chempolishing (C) and electropolishing (E) steps. Two dual-stage surface finishing approaches, i.e., chempolishing followed by electropolishing (CE) and electropolishing followed by chempolishing (EC), were performed on the 316 stainless AM steel component. Impacts of EC and CE approaches were compared with single-stage C and E surface finishing approaches. An optical microscope and mechanical profilometer were utilized to investigate the wide range of surface roughness parameters. CE and EC produced Ra ~ 1.4 µm and ~ 1.6 µm, respectively. Surface roughness on CE- and EC-treated AM samples was lower than those individually treated by C and E approaches. Scanning electron microscopy provided further insights into the microstructural difference between CE- and EC-treated AM samples. This paper reports a liquid contact angle study on CE- and EC-treated AM samples to provide insights into the relative difference in surface energy that is crucial for making coatings on AM parts. A spectroscopic reflectance study was also employed to register the difference in physical properties of AM components treated with CE and EC approaches. Further, this study reveals industrially practicable interior and exterior surface finishing approaches for complex AM metal components that require minimum tooling and real-time process monitoring.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Surface texture of Vesta from optical polarimetry

Polarimetric, photometric, and reflective spectroscopic properties of asteroid 4 Vesta are simulated in the laboratory by a preparation of eucrite Bereba consisting of a broad mixture of particle sizes (mainly greater than 50-micron) mixed and partially coated with particles of size 10 microns and less. Coarse grains are necessary for producing the same albedo and a very fine dust coating is necessary for producing the same polarization inversion angle as observed for Vesta. There are less small grains and fine dust in this sample than in lunar soils. Photometrically, if coating a sphere, this sample shows a constant brightness on the sunward half of the observed hemisphere, the brightness being given on the other half by the Minnaert reciprocity principle. With such a photometric behavior, the global geometric albedo and the sub-earth point geometric albedo differ by no more than 5%. The microscopic phase coefficient is 0.021 magnitude per degree for the sample; the larger value, 0.025, observed telescopically for Vesta, indicates that large-scale roughness is present on this asteroid.

Le Bertre, T.↗
NASA NTRS1983

Analysis of grain boundary phase devitrification of Y2O3- and Al2O3-doped Si3N4

The present study has the objective to show that a Fourier Transform IR (FTIR) spectrometer in a single-beam reflection mode can be used for direct comparison of fractured vs nonfractured Si3N4 surfaces. This can be done because the FTIR method permits a digital summation of nearly 1000 scans of the fracture surface. Commercial-grade Si3N4, Y2O3, and Al2O3 were used in the study. The samples were heat treated in a vacuum induction heating furnace at either 1000 C for 10 h or 1200 C for 10 h each. Use of Fourier transform IR reflection spectroscopic analysis and X-ray diffraction shows that 10 h at 1200 C is sufficient to devitrify the amorphous grain boundary phase of Si3N4 containing 15 percent Y2O3 + 2 percent Al2O3 densification aids.

Hench, L. L.↗
NASA NTRS1993

Variations in the Fe mineralogy of bright Martian soil

Bright regions on Mars are interpreted as 'soil' derived by chemical alteration of crustal rocks, whose main pigmentary component is ferric oxide or oxyhydroxide. The mineralogy and mineralogic variability of ferric iron are important evidence for the evolution of Martian soil: mineralogy of ferric phases is sensitive to chemical conditions in their genetic environments, and the spatial distributions of different ferric phases would record a history of both chemical environments and physical mixing. Reflectance spectroscopic studies provide several types of evidence that discriminate possible pigmentary phases, including the position of a crystal field absorption near 0.9 microns and position and strengths of absorptions in the UV-visible wavelength region. Recent telescopic spectra and laboratory measurements of Mars soil analogs suggest that spectral features of bright soil can be explained based on a single pigmentary phase, hematite (alpha-Fe2O3), occurring in both 'nanophase' and more crystalline forms. Here we report on a systematic investigation of Martian bright regions using ISM imaging spectrometer data, in which we examined spatial variations in the position and shape of the approximately 0.9 microns absorption. We found both local and regional heterogeneities that indicate differences in Fe mineralogy. These results demonstrate that bright soils do not represent a single lithology that has been homogenized by eolian mixing, and suggest that weathering of soils in different geologic settings has followed different physical and chemical pathways.

Murchie, Scott↗
NASA NTRS1988

A diffuse reflectance infrared Fourier transform spectroscopic study of adsorbed hydrazines

Diffuse reflectance spectroscopy of fuel hydrazines adsorbed on silica, silica-alumina and alimina surfaces indicates that the primary surface-hydrazine interaction is hydrogen bonding. Hydrazine, on adsorption to a deuterated silica surface, undergoes a rapid H/D exchange with deuterated surface silanol (Si-OD) groups. Adsorption equilibria are rapidly established at room temperature. Monomethylhydrazine and unsymmetrical dimethylhydrazine are similarly adsorbed. On adsorption, the C-H stretching and methyl deformation modes of the methylhydrazines are shifted to higher frequencies by 10 to 20 cm(-1). These shifts are postulated to be due to changes in the lone-pair electro-density on the adjacent nitrogen atom and an electronegativity effect.

Davis, Dennis D.↗
NASA NTRS2003

The Mars Underground Mole (MUM): A Subsurface Penetration Device with Infrared Reflectance and Raman Spectroscopic Sensing Capability

Searching for evidence of life on Mars will probably require access to the subsurface. The Martian surface is bathed in ultraviolet radiation which decomposes organic compounds, destroying possible evidence for life. Also, experiments performed by the Viking Landers imply the presence of several strongly oxidizing compounds at the Martian surface that may also play a role in destroying organic compounds near the surface. While liquid water is unstable on the Martian surface, and ice is unstable at the surface at low latitudes, recent results from the Mars Odyssey Gamma Ray Spectrometer experiment indicate that water ice is widely distributed near the surface under a thin cover of dry soil. Organic compounds created by an ancient Martian biosphere might be preserved in such ice-rich layers. Furthermore, accessing the subsurface provides a way to identify unique stratigraphy such as small-scale layering associated with lacustrine sediments. Subsurface access might also provide new insights into the Mars climate record that may be preserved in the Polar Layered Deposits. Recognizing the importance of accessing the subsurface of Mars to the future scientific exploration of the planet, the Mars Surveyor 2007 Science Definition Team called for drilling beneath the surface soils. Subsurface measurements are also cited as high priority in by MEPAG. Recognizing the importance of accessing the Martian subsurface to search for life, the European Space Agency has incorporated a small automated burrowing device called a subsurface penetrometer or Mole onto the Beagle 2 lander planned for 2003 launch. This device, called the Planetary Underground Tool (PLUTO), is a pointed slender cylinder 2 cm wide and 28 cm long equipped with a small sampling device at the pointed end that collects samples and brings them to the surface for analysis. Drawing on the PLUTO design, we are developing a larger Mole carrying sensors for identifying mineralogy, organic compounds, and water.

Stoker, C. R.↗
NASA NTRS1973

A study of the reflection effect in close spectroscopic binary stars

Four W Ursae Majoris-type binaries were investigated using the simple model of blackbody solid spheres. Numerical computations were carried out for the rotationally broadened profiles of spectral lines Sr II (4077.7) and Ca I (4226.7) and the mean radial velocities. These mean velocities at different phases outside eclipses were compared with sinusoidal values of the radial velocity curve for point masses. Within the present accuracy of observations, the reflection effect is small and may be neglected in the analysis of radial velocity curves.

Chen, K.-Y.↗
DOE OSTI2022

Using spectroscopic ellipsometry and single-angle reflectance to derive accurate optical constants for chemical forms of aspartame

Variable angle spectroscopic ellipsometry and single-angle infrared reflectance methods have been used to derive the complex optical constants n and k in the mid-infrared spectral region for aspartame. Aspartame exists in four unique forms – three of which incorporate water into the lattice, as well as the anhydrate form. The different forms can induce splitting or slight wavenumber shifts in the spectral features. Pressed pellets of neat powder were prepared and measured using both methods to derive the optical constants. Different n and k values were obtained depending on the percentage of the forms of aspartame, which was determined using powder X-ray diffraction (XRD) analysis.

optical constants, refractive index, extinction co↗