Search NASA⌕ Search

SEARCH · Search NASA

Results for “strain microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Adaptively coupled phase retrieval in multi-peak Bragg coherent diffraction imaging

Recent advances in Bragg coherent diffraction imaging (BCDI) experimental techniques permit routine measurement of multiple Bragg peaks from a single crystalline grain. The resulting images contain the full lattice distortion vector field which can be differentiated to provide lattice strain and rotation. With the advent of fourth-generation synchrotron light sources, such multi-peak datasets are produced at high rates, facilitating the need for rapid phase retrieval of the multiple peaks and subsequent image analysis. Here we describe and demonstrate a new implementation of a coupled phase retrieval technique for multi-peak BCDI which simultaneously treats each Bragg peak of the dataset and produces a three-dimensional image of the crystal's morphology and lattice distortion field. In addition, this method uses the redundant information contained in the various Bragg diffraction patterns to detect and suppress spurious signal appearing on the detector in a subset of the measurements. Compared with manual data editing, adaptive coupling produces a more consistent phase profile in reciprocal space and sharper surfaces in direct space, with no significant difference in computational cost. These improvements reduce the need for manual preprocessing and enable robust high-throughput analysis of multi-peak BCDI data, supporting near-real-time strain microscopy at modern synchrotron facilities.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quantifying the dislocation content of atomically resolved grain boundary line defects using the Nye tensor

The Nye tensor, which quantifies the density of Burgers vector for a given dislocation line direction, can be effectively used to characterize dislocation content in bulk crystals from atomic-resolution transmission electron microscopy images. The Nye tensor can be calculated from these images, in part because the reference state is simply defined by the lattice of the perfect crystal. The application of the Nye tensor to interfacial line defects, for which the natural reference state is the dichromatic pattern of the two grains in their reference orientation, poses additional challenges. In this work, we present a method that employs the Nye tensor to characterize the edge dislocation content of line defects at grain boundaries from atomic-resolution images. This approach enables us to rapidly characterize all edge dislocation content along a grain boundary. Additionally, the Nye tensor provides information about line defect core structure. Finally, we demonstrate this method on two exemplar defects: a twin boundary disconnection and a facet junction in face-centered cubic Au.

Crystallographic defects↗
DOE OSTI2025

Determining anisotropic slip system rate sensitivities of Ti-6Al-4V using high-energy X-ray diffraction microscopy

Variation of strain rate sensitivity among different families of slip systems in the hexagonal close-packed (α) phase of titanium (Ti) alloys has the potential to alter microscale load redistribution during both creep and dwell fatigue loading. However, existing literature contains conflicting reports regarding the degree of anisotropy present in the strain rate sensitives between α slip system families across Ti alloys. Here, we quantify the strain rate sensitivity of α slip system families in Ti-6Al-4V using high-energy X-ray diffraction microscopy (HEDM). We present a novel procedure in which we utilize the HEDM-measured grain-scale stress states during stress relaxation to determine the strain rate sensitivities of the basal $\langle a \rangle$ , prismatic $\langle a \rangle$, and first-order pyramidal $\langle c + a \rangle$ slip system families. In addition, we measure the strain rate sensitivity exponent of the macroscopic response and the α phase for comparison. We find rate sensitivities for the different slip system families to range from 0.02 to 0.04, which—while varied—are relatively isotropic in comparison with some values presented in the literature. We also demonstrate the effects of the measured anisotropic rate sensitivities using crystal plasticity finite element simulations.

Peterson, Kenneth M. [Pennsylvania State Univ., Un↗
DOE OSTI2025

Σ3(111) Grain Boundaries Accelerate Hydrogen Insertion into Palladium Nanostructures

Grain boundaries (GBs) are frequently implicated as key defect structures facilitating metal hydride formation, yet their specific role remains poorly understood due to their structural complexity. Here, we investigate hydrogen insertion in Pd nanostructures enriched with well-defined Σ3(111) GBs (Pd GB ) synthesized via electrolysis-driven nanoparticle assembly. In situ synchrotron X-ray diffraction reveals that Pd GB exhibits dramatically accelerated hydriding and dehydriding kinetics compared with ligand-free and ligand-capped Pd nanoparticles with similar crystallite sizes. Strain mapping using environmental transmission electron microscopy shows that strain is highly localized at GBs and intensifies upon hydrogen exposure, indicating preferential hydrogen insertion along GB sites. Density functional theory calculations provide mechanistic insight supporting these findings, showing that hydrogen insertion near Σ3(111) GBs is energetically more favorable and that tensile strain lowers insertion barriers. Furthermore, these results provide atomic-level insights into the role of GBs in hydride formation and suggest new design strategies for GB-engineered Pd-based functional materials.

Anions↗
DOE OSTI2026

Defect-Limited Carrier Lifetime in Epitaxially Strained Germanium-On-Silicon Heterostructures

Epitaxially strained germanium-on-silicon (Ge-on-Si) heterostructures are central to next-generation photonic and electronic devices, yet their performance remains strongly constrained by defect-limited carrier lifetimes. In this work, we investigate the impact of defects on the carrier lifetime in relaxed Ge-on-Si and strained Ge-on-Si heterostructures. High-resolution X-ray diffraction quantifies the strain-state in Ge and reveals signatures of strain relaxation due to lattice mismatch. Cross-sectional and plan-view transmission electron microscopy analyses enable direct visualization of interfacial defects and quantification of threading dislocation densities (TDDs) within the Ge layer. However, the presence of a dense misfit dislocation network obscures the threading dislocation signatures, preventing reliable TDD determination by plan-view transmission electron microscopy in strained-Ge (..epsilon..-Ge). To assess the defect density in this case, etch-pit density measurements were performed, providing an alternative means of quantifying the TDDs in the ..epsilon..-Ge layer. Carrier lifetime measurements by microwave-reflection photoconductive decay reveal a clear relationship with TDDs ranging from 5 x 103 cm-2 to 2 x 1010 cm-2, confirming Shockley-Read-Hall recombination as the limiting mechanism at lower defect densities, with TDD-dominated recombination at higher defect densities. The Ge-on-Si relaxed heterostructure exhibited lifetimes much lower (~12 ns) than the lattice-matched Ge on gallium arsenide (GaAs) (~158 ns) heterostructure. Introducing controlled tensile strain reduces defect formation, suppresses strain-relaxation pathways, and leads to measurable improvements in minority carrier lifetime from 12 ns to 171 ns. These results establish a direct relation between defect suppression and carrier recombination dynamics in both relaxed Ge-on-Si grown directly on Si and strained Ge-on-Si heterostructures incorporating compound-semiconductor buffer layers, offering a materials-driven pathway for engineering Ge with improved carrier lifetime for photonic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Size dependent lattice pseudosymmetry for frustrated decahedral nanoparticles

Geometric frustration—where geometry prevents simultaneous satisfaction of local interactions—generates pseudosymmetry and emergent behaviors across physical and biological systems. At the nanoscale, pseudosymmetric features in crystalline materials manifest as local strain and distortion, but how they depend on particle size and control structural stability remains unclear. Here, we report the first study of a size-dependent crossover in pseudosymmetry in multi-twinned gold nanoparticles (NPs), combining four-dimensional scanning transmission electron microscopy with nanoscale strain mapping grounded in continuum solid mechanics. Analysis of more than 20 decahedral NPs (20–55 nm) reveals pronounced heterogeneity in multiple modes of in-plane strain and displacement field in small NPs as five tetrahedral grains close the geometric gap, without extended defects. With increasing particle size, strain fields homogenize across grains and local phases shift from predominantly low-symmetry body-centered tetragonal motifs at small sizes to face-centered cubic character approaching the bulk limit. We identify a crossover particle size of ~35 nm, well below bulk, correlating with a transition from modified-Wulff shapes to pentagonal bipyramids, consistent with finite element predictions. This quantitative framework for mapping size-dependent strain and pseudosymmetry enables precise design and control of functional crystalline solids and phase transformation for catalysis, photonics, electronics, and energy storage.

Lin, Oliver [University of Illinois at Urbana-Cham↗
DOE OSTI2026

Discovery of spontaneous mesoscopic strain waves in nematic domains using dark-field x-ray microscopy

Electronic nematic order arises when correlated electrons spontaneously break the rotational symmetry of a crystal lattice. When electronic nematic order couples bilinearly to symmetry-breaking lattice strain, both appear together at a single ferroelastic phase transition, producing structural twin domains with distinct orientations of the nematic director. While the effects of applied strain on these domains are well established, the intrinsic behavior of spontaneous subdomain strain fields has remained unexplored. Here, we report the discovery of spontaneous mesoscopic strain waves within individual nematic domains of an iron-based superconductor, observed using dark-field x-ray microscopy (DFXM). Using this advanced full-field imaging technique, we visualize subdomain strain modulations emerging concurrently with nematic order. Elastic compatibility relations governing inhomogeneous strains provide a natural mechanism for the strain waves. Our findings reveal a broadly relevant form of strain self-organization and position DFXM as a powerful probe of the local interplay between lattice strain and electronic order.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mapping strain and structural heterogeneities around bubbles in amorphous ionically conductive Bi 2 O 3

While amorphous materials are often approximated to have a statistically homogeneous atomic structure, they frequently exhibit localized structural heterogeneity that challenges simplified models. This study uses 4D scanning transmission electron microscopy to investigate the strain and structural modifications around gas bubbles in amorphous Bi 2 O 3 induced by argon irradiation. We present a method for determining strain fields surrounding bubbles that can be used to measure the internal pressure of the gas. Compressive strain is observed around the cavities, with higher-order crystalline symmetries emerging near the cavity interfaces, suggesting paracrystalline ordering as a result of bubble coarsening. This ordering, along with a compressive strain gradient, indicates that gas bubbles induce significant localized changes in atomic packing. By analyzing strain fields with maximum compressive strains of 3%, we estimate a lower bound on the internal pressure of the bubbles at 2.5 GPa. These findings provide insight into the complex structural behavior of amorphous materials under stress, particularly in systems with gas inclusions, and offer new methods for probing the local atomic structure in disordered materials. Although considering structural heterogeneity in amorphous systems is non-trivial, these features have crucial impacts on material functionalities, such as mechanical strength, ionic conductivity, and electronic mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A variant of the MenB strain of Synechocystis sp. PCC 6803 disrupts a stress response pathway allowing DMPBQ to occupy the A 1 sites of photosystem I

Phylloquinone (PhQ) plays a unique role in photosynthesis as the A1A and A1B intermediates in light-driven electron transfer in Photosystem I (PSI). When PhQ biosynthesis is inhibited by deletion of the menB gene in the cyanobacterium Synechocystis sp. PCC 6803, previous studies have shown that plastoquinone-9 (PQ-9) occupies the A 1 sites. However, a recent cryo-electron microscopy structure of a strain of ΔmenB from the year 2023 revealed an unusual quinone in the A 1 sites with a benzoquinone headgroup similar to PQ-9 and a phytyl tail similar to PhQ. Here, we investigate its biosynthesis and binding properties. Mass spectrometry confirms that PSI from the 2023 ΔmenB strain contains 2,3-dimethyl-5-phytyl-1,4-benzoquinone (DMPBQ), while PSI from the original strain contains PQ-9. Whole genome sequencing reveals that a mutation in slr1737 (tocopherol cyclase) leads to the accumulation of DMPBQ, an intermediate in the tocopherol biosynthetic pathway. Transient optical and electron paramagnetic resonance spectroscopy studies show that when DMPBQ occupies the A 1 sites, it does not exchange with exogenously supplied PhQ in contrast to PQ-9, which exchanges readily. We propose that the slr1737 mutation in the 2023 ΔmenB strain is a likely candidate for the source of the phenotype. This new strain has sacrificed tocopherol synthesis, the absence of which is known to have no effect on growth under low stress conditions, resulting in incorporation of DMPBQ in the A 1 sites. The tighter binding and function of DMPBQ likely allow this ΔmenB strain to outcompete its peers under optimal growth conditions and thus dominate the population.

2,3-dimethyl-5-phytyl-1,4-benzoquinone↗
DOE OSTI2026

Machining-inducted residual strain and ductile-brittle transition in sapphire revealed by X-ray nanoprobe diffraction microscopy

Hard X-ray nanoprobe diffraction microscopy is employed to investigate machining-induced residual lattice strain in single-crystal sapphire following ultra-precision orthogonal plunge cutting. In this study, tilt-series and single-angle acquisition strategies are systematically compared to evaluate their capability for resolving lattice variations associated with the machining process. An analytical framework is developed to enable the efficient and reliable extraction of strains, which serve as strain-based indicators of changes in the dominant deformation mechanism. The measured high-dimensional strain exhibits spatial heterogeneity and systematic evolution along the cutting path, consistent with deformation-regime changes from ductile response to crack-prone behavior.

Liang, Rui↗
DOE OSTI2025

Prediction of carbon nanostructure mechanical properties and the role of defects using machine learning

Graphene-based nanostructures hold immense potential as strong and lightweight materials, however, their mechanical properties such as modulus and strength are difficult to fully exploit due to challenges in atomic-scale engineering. This study presents a database of over 2,000 pristine and defective nanoscale CNT bundles and other graphitic assemblies, inspired by microscopy, with associated stress–strain curves from reactive molecular dynamics (MD) simulations using the reactive INTERFACE force field (IFF-R). These 3D structures, containing up to 80,000 atoms, enable detailed analyses of structure-stiffness-failure relationships. By leveraging the database and physics- and chemistry-informed machine learning (ML), accurate predictions of elastic moduli and tensile strength are demonstrated at speeds 1,000 to 10,000 times faster than efficient MD simulations. Hierarchical Graph Neural Networks with Spatial Information (HS-GNNs) are introduced, which integrate chemistry knowledge. HS-GNNs as well as extreme gradient boosted trees (XGBoost) achieve forecasts of mechanical properties of arbitrary carbon nanostructures with only 3 to 6% mean relative error. The reliability equals experimental accuracy and is up to 20 times higher than other ML methods. Predictions maintain 8 to 18% accuracy for large CNT bundles, CNT junctions, and carbon fiber cross-sections outside the training distribution. The physics- and chemistry-informed HS-GNN works remarkably well for data outside the training range while XGBoost works well with limited training data inside the training range. The carbon nanostructure database is designed for integration with multimodal experimental and simulation data, scalable beyond 100 nm size, and extendable to chemically similar compounds and broader property ranges. The ML approaches have potential for applications in structural materials, nanoelectronics, and carbon-based catalysts.

Winetrout, Jordan J.↗
DOE OSTI2025

Blending Compostable Plastics for Packaging Applications

Non-sustainable packaging materials (polymers) are a large portion of the increasing amount of plastic waste that become environmental pollutants. While many biodegradable or compostable polymers have been developed in recent years, most fail to compete with the non-sustainable polymers dominating the market, due to lack of certain desired properties, such as thermal (high melt temperature) and mechanical (high ductility) performance. For example, the popular compostable polymer polylactic acid (PLLA) has a high melt temperature but is very brittle. Another polymer, poly(d-valerolactone) (PVL) demonstrates great ductility but has a very low melt temperature. By blending PLLA and PVL, there is an opportunity to create a new biodegradable material with synergistic desired properties for packaging applications. In this study, we produce several (9) physical blends of PVL and PLLA with varying compositions of the two polymers while applying three different materials to make them more compatible (compatibilizers). We test the success of compatibilization by scanning electron microscopy (SEM), mechanic testing (strain at break) and differential scanning calorimetry (melting temperature). Overall, we highlight several promising materials with high compatibility and desired thermomechanical properties for sustainable packaging. Ideally, these materials could help mitigate future plastic pollution in Colorado and beyond.

blending↗
DOE OSTI2025

Electrode strain dynamics in layered intercalation battery cathodes

Rechargeable batteries using electrodes based on intercalation chemistry exhibit notable cyclability, yet their performance still suffers from chemomechanical degradation. In this study, by combining a suite of operando microscopy methods, we explored electrode strain evolution and observed intricate particle cluster rearrangement under electrochemical stimuli. We show that early-stage strain accumulation in intercalation cathodes occurs during the period of interparticle charge transfer and redox reactions stemming from asynchronous coupling and decoupling between chemical (de)intercalation and physical grain motion. This interplay drives heterogeneous redox activity, localized charge equilibration, and multiscale strain cascades that propagate through an asynchronous network of chemical-mechanical interactions. Together, these findings reveal how collective particle dynamics and hierarchical strain transmission dictate electrode deformation and degradation in intercalation cathodes.

25 ENERGY STORAGE↗
DOE OSTI2026

In-Situ Visualization of a Growing Brittle Crack in Aluminum Oxynitride Using Synchrotron X-Rays and the Double-Cleavage Drilled Compression Geometry

Brittle fracture is difficult to study in situ due to the speed of a growing crack and the often-catastrophic nature of failure in brittle materials. As a result, the influence of microstructural considerations, such as orientation, grain boundary locations, and strain field, on the crack path remains poorly understood. Presented in this study is a method addressing this knowledge gap, which utilizes the double-cleavage drilled compression geometry to achieve quasi-stable fracture in aluminum oxynitride (AlON). Synchrotron X-ray micro-computed tomography is used to characterize the crack shape and length, while high-energy diffraction microscopy provides information on the strains, orientations, and shapes of grains in the microstructure surrounding the crack tip. During testing, the crack grew in discrete and irregular jumps while the fracture toughness falls within reported ranges. The crack in AlON is found to have no greater tendency to crack intergranularly as compared to transgranularly, and grains which are cracked transgranularly do not display a trend in orientation or stress when compared to those around which the crack followed a grain boundary. The high resolution of the crack path and microstructural data provides a path forward for modeling and understanding 3D brittle fracture.

Gorske, Sara F.↗
DOE OSTI2026

Multi-modal characterization of nitrate reduction nano-catalysts with periodic strain distribution

Strain engineering serves as a pivotal strategy to optimize catalytic activity in electrocatalysis. However, the catalyst sizes under industrial conditions are usually large and even beyond nanometer regime. The critical methodological limitations on strain imaging of such catalysts with both large field of view and high spatial resolution obscure the mechanistic understanding of strain-performance correlations. Here, we present an optimized four-dimensional scanning transmission electron microscopy (4D-STEM) method to acquire strain mapping of both bulk and surface across particles up to 500 nm with 0.6 nm spatial resolution and 0.55% precision. We observe the ripple-like periodic strain coupled with elemental fluctuations inside a perovskite-type hydroxide CuCoSn(OH) 6 and find it correlated to electrocatalytic nitrate reduction (NO 3 – RR) absorption energy to achieve the 92.6% Faradaic efficiency and long-term test over 1000 h at membrane electrode assembly (MEA) for ammonia electrosynthesis. This universal framework design offers a practical method that not only develops an advanced measurement combining multi-modal characterization techniques but also reveals the intrinsic structure-property constitutive law of industry-level catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Strain-Modified Raman Responses in Monolayer MoS 2 Nanobubbles Resolved at 5 nm

The formation of nanoscale bubbles is an unavoidable consequence during the transfer of two-dimensional materials onto target substrates, driven by van der Waals interactions at the interface. While often viewed as imperfections, these nanoscale bubbles have garnered considerable scientific interest due to the substantial in-plane strain gradients they induce, which in turn give rise to a variety of intriguing optoelectronic effects, particularly in semiconducting transition metal dichalcogenides. Determining and analyzing the strain distribution within nanobubbles at the nanoscale is crucial for advancing our understanding of these underlying strain-induced effects. Here, we present a high-resolution scanning tunneling microscopy-based tip-enhanced Raman spectroscopic investigation of localized nanoscale strain distribution within the nanobubbles formed between monolayer MoS 2 and Au interface. By employing cryogenic temperature (78 K), we successfully differentiate the nanoscale Raman signatures between nanobubble edge and pristine MoS 2 . We verify a maximum tensile strain of ∽1.15–1.34% at the nanobubble edge, which gradually diminishes toward the center, yielding a cross-sectional strain profile consistent with a doughnut-shaped distribution. Furthermore, we report to achieve ∽5 nm spatial resolution in probing such edge-localized strain within the nanobubble. In addition, comparative average strain analysis of such MoS 2 nanobubbles is conducted via geometric mechanistic analysis such as membrane and nonlinear plate theories, providing key insight into the geometric nature near the bubble edge. Our work provide fundamental information about strain-induced nanoscale chemical understanding of 2D materials on the nanometer scale, paving the way for practical applications of nanobubbles in strain-engineered optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ternary molecular switching in a single-crystal optical actuator with correlated crystal strain

A growing portfolio of single-crystal optical actuators is forging a new class of photonic materials that hold prospects for quantum technologies. Ruthenium-based complexes that exhibit this phenomenon via SO 2 -linkage photoisomerisation are of particular interest since they display multiple metastable states, once induced by green light; yet, complete photoconversion into each SO 2 -isomeric state is rarely achieved. We discover a new complex, trans-[Ru(SO 2 )(NH 3 ) 4 (4-bromopyridine)]tosylate 2 , that produces 100% photoconverted η 1 -OSO isomeric crystal structures at 90 K, which fully transition into η 2 -(OS)O photoisomers upon warming to 100 K, while the dark-state η 1 -SO 2 structure is wholly recovered by heating the crystal to room temperature. Crystal structures and optical-absorption profiles of each state are captured via in-situ light-induced single-crystal X-ray diffraction and optical-absorption spectroscopy. Results show that both photoisomeric species behave as optical switches, but with distinct optical properties. The photoisomerisation process causes thermally-reversible micro- and nanoscopic crystal strain, as characterised by optical microscopy and in-situ light-induced atomic-force microscopy.

actuators↗